- 14 Sep, 2016 10 commits
-
-
Jun Nie authored
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by:
Jun Nie <jun.nie@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Alex Elder <elder@linaro.org> [sboyd@codeaurora.org: Save a line] Signed-off-by:
-
Uwe Kleine-König authored
This helps to decode error messages like: [ 0.000000] i.MX clk 82: register failed with -17 Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
This fixes [ 0.000000] i.MX clk 82: register failed with -17 because the name is duplicated. Signed-off-by:
-
Arnd Bergmann authored
The addition of many gate clocks added two entries in an array for the same value: drivers/clk/meson/meson8b.c:479:10: error: initialized field overwritten [-Werror=override-init] [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw, [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_vencp_int.hw, This was clearly an accident, and since all other identifiers are listed in the order in which they are defined, I'm changing the first one to CLKID_GCLK_VENCI_INT0, making it all consistent again. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: e31a1900 ("meson: clk: Add support for clock gates") Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/clk/mmp/clk-mmp2.c:75:13: warning: no previous prototype for 'mmp2_clk_init' [-Wmissing-prototypes] In fact, this function is declared in linux/clk/mmp.h, so this patch add missing header dependencies. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Acked-by:
-
Stephen Boyd authored
Merge tag 'clk-renesas-for-v4.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull renesas clk driver updates from Geert Uytterhoeven: - External crystal selection for RZ/A1, - CMT clocks for R-Car H3 and M3-W, - RAVB and Thermal clocks for R-Car M3-W. * tag 'clk-renesas-for-v4.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add CMT clocks clk: renesas: r8a7795: Add CMT clocks clk: renesas: r8a7796: Add RAVB clock clk: renesas: r8a7796: Add THS/TSC clock clk: renesas: rz: Select EXTAL vs USB clock
-
Wei Yongjun authored
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock driver changes from Maxime Ripard: Four more SoCs converted to the new clock framework (A31, A31s, A23 and A33). * tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Add hardware dependency clk: sunxi-ng: Add A23 CCU clk: sunxi-ng: Add A33 CCU support clk: sunxi-ng: Add N-class clocks support clk: sunxi-ng: mux: Add mux table macro clk: sunxi-ng: div: Allow to set a maximum clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure clk: sunxi-ng: div: Add mux table macros clk: sunxi-ng: Add A31/A31s clocks clk: sunxi-ng: mux: Add clk notifier functions clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents clk: sunxi-ng: mux: Add support for mux tables clk: sunxi-ng: mux: Rename mux macro to be consistent clk: sunxi-ng: nkm: Add mux to support multiple parents clk: sunxi-ng: mux: Increase fixed pre-divider div size
-
git://linuxtv.org/snawrocki/samsungStephen Boyd authored
Pull samsung clk driver updates from Sylwester Nawrocki: In addition to a few clean up and code consolidation patches this includes: - addition of sound subsystem related clocks for Exynos5410 SoC (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock" compatible in the clk-exynos-audss driver, - addition of DRAM controller related clocks for exynos5420, - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC clock drivers co-maintainer. * tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung: clk: samsung: Add support for EPLL on exynos5410 clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup clk: samsung: clk-exynos-audss: Add exynos5410 compatible clk: samsung: clk-exynos-audss: controller variant handling rework clk: samsung: Use common registration function for pll2550x clk: samsung: exynos5410: Expose the peripheral DMA gate clocks clk: samsung: exynos5420: Add clocks for CMU_CDREX domain clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code clk: samsung: exynos5260: Move struct samsung_cmu_info to init section MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
-
- 12 Sep, 2016 3 commits
-
-
Bui Duc Phuc authored
This patch adds CMT module clocks for r8a7796 SoC. Signed-off-by:
Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Bui Duc Phuc authored
This patch adds CMT module clocks for r8a7795 SoC. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
- 10 Sep, 2016 8 commits
-
-
Jean Delvare authored
The sunxi-ng clock driver is useless for other architectures. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
Add support for the clock unit found in the A23. Due to the similarities with the A33, it also shares its clock IDs to allow sharing the DTSI. Signed-off-by:
Chen-Yu Tsai <wens@csie.org>
-
Maxime Ripard authored
This commit introduces the clocks found in the Allwinner A33 CCU. Since this SoC is very similar to the A23, and we share a significant share of the DTSI, the clock IDs that are going to be used will also be shared with the A23, hence the name of the various header files. Signed-off-by:
-
Maxime Ripard authored
Add support for the class with a single factor, N, being a multiplier. Signed-off-by:
-
Maxime Ripard authored
Add a new macro to declare muxes based on a table and a gate. Signed-off-by:
-
Maxime Ripard authored
Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by:
-
Maxime Ripard authored
The internal _ccu_div structure is meant to be embedded into other structures to combine the various dividers and to form the clock classes support. Start to document those structures by using kerneldoc. Signed-off-by: -
Maxime Ripard authored
Add some macros to ease the declaration of clocks that are using them. Signed-off-by:
-
- 09 Sep, 2016 13 commits
-
-
Tomeu Vizoso authored
Right now we are passing a pointer to a pointer to the structure that will be used to fetch the clk hw, which gets casted later to a pointer to the structure, thus getting garbage in the hw structs. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Fixes: a8b6e85d ("clk: rk808: Migrate to clk_hw based OF and registration APIs") Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds code instantiating the EPLL, which is used as the audio subsystem's root clock. The requirement to specify the external root clock in clocks property is documented. Having the consumer 'clocks' property ensures proper initialization order by explicitly specifying dependencies in DT. It prevents situations when the SoC's clock controller driver has initialized, the external oscillator clock is not yet registered and setting clock frequencies through assigned-clock-rates property doesn't work properly due to unknown external oscillator frequency. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com>
-
Sylwester Nawrocki authored
There is no need to log probe() completion in normal conditions so the "setup completed" log is removed. Signed-off-by: -
Sylwester Nawrocki authored
Exynos5410 Audio Subsystem Clock Controller, comparing to the already supported IP block revisions, has additionally an I2S_MST divider so a new compatible string is added. It is not clear from the Exynos5410 User's Manual released on 2012.03.09 where in the clock tree the I2S_MST clock divider can be found exactly so this clock is left unimplemented for now. Signed-off-by: -
Sylwester Nawrocki authored
Then variant handling is reworked to make the code simpler when more variants are added. Signed-off-by: -
Sylwester Nawrocki authored
There is no such significant differences in pll2550x PLL type to justify a separate registration function. This patch adapts exynos5440 driver to use the common function and removes samsung_clk_register_pll2550x(). Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
-
Sylwester Nawrocki authored
These clocks are needed in order to use the PL330 peripheral DMA controllers. Signed-off-by: -
Chanwoo Choi authored
This patch adds the mux/divider clocks for CMU_CDREX (DRAM Express Controller) which generates the clocks for DRAM and NoC (Network on Chip) bus. There is differnet source of MUX_MX_MSPLL_CCORE between exynos5420 and exynos5422, so each MUX_MX_MSPLL_CCORE uses the different parent source group. Signed-off-by:
-
Chanwoo Choi authored
This patch uses the samsung_cmu_register_one() to simplify code and move the pll/mux/div/gate data to initconst section. Signed-off-by:
-
Chanwoo Choi authored
This patch moves the samsung_cmu_info struct instances to initconst section, this decreases the kernel image size by 784 bytes, which makes zImage smaller by 480 bytes. The patch increases .init.rodata section size by 780 bytes but decreases .init.text section size by 1564 bytes. Size of the drivers/clk/samsung/clk-exynos5260.o object file is 29100 bytes without the patch and 28316 after applying the patch. The section size differences are as below: 15c15 < 3 .init.text 000006b8 00000000 00000000 00000034 2**2 --- > 3 .init.text 0000009c 00000000 00000000 00000034 2**2 25c25 < 8 .init.rodata 00003f6c 00000000 00000000 00002f20 2**2 --- > 8 .init.rodata 00004278 00000000 00000000 00002904 2**2 Signed-off-by:
-
Chanwoo Choi authored
Add myself to the SAMSUNG SOC CLOCK DRIVERS entry, I'm going to review and test related patches as supporter. I can access all the datasheet of Exynos SoC series and can do tests on Exynos based boards. I have implemented the exynos4415/5433 clock drivers and co-authored the exynos3250 clock driver. While at it, add missing paths of the exynos clock driver files. Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
The PDMA{0,1} and EPLL clock IDs are added separately in this patch so the patch can be merged to the arm-soc tree as dependency. Signed-off-by: -
Chanwoo Choi authored
This patch adds missing clock IDs for CMU_CDREX (DRAM Express Controller) which generates clocks for DRAM and NoC (Network on Chip) busses. Signed-off-by:
-
- 08 Sep, 2016 2 commits
-
-
Stephen Boyd authored
* clk-fixes: clk: sunxi-ng: Fix wrong reset register offsets clk: sunxi-ng: nk: Make ccu_nk_find_best static clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock clk: sunxi: Fix return value check in sun8i_a23_mbus_setup() clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
-
Stephen Boyd authored
Merge tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes Clock Fixes for the Allwinner SoCs, 4.8 Edition The usual bunch of fixes to the our clock drivers, mostly targetted to the brand new sunxi-ng drivers. * tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Fix wrong reset register offsets clk: sunxi-ng: nk: Make ccu_nk_find_best static clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock clk: sunxi: Fix return value check in sun8i_a23_mbus_setup() clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
-
- 07 Sep, 2016 4 commits
-
-
Eric Anholt authored
If the firmware had set up a clock to source from PLLC, go along with it. But if we're looking for a new parent, we don't want to switch it to PLLC because the firmware will force PLLC (and thus the AXI bus clock) to different frequencies during over-temp/under-voltage, without notification to Linux. On my system, this moves the Linux-enabled HDMI state machine and DSI1 escape clock over to plld_per from pllc_per. EMMC still ends up on pllc_per, because the firmware had set it up to use that. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Acked-by:
Martin Sperl <kernel@martin.sperl.org> Signed-off-by:
-
Eric Anholt authored
While the SDRAM is being driven by its dedicated PLL most of the time, there is a little loop running in the firmware that periodically turns on the CM SDRAM clock (using its pre-initialized parent) and switches SDRAM to using the CM clock to do PVT recalibration. This avoids system hangs if we choose SDRAM's parent for some other clock, then disable that clock. Signed-off-by:
-
Eric Anholt authored
These divide off of PLLD_PER and are used for the ethernet and wifi PHYs source PLLs. Neither of them is currently represented by a phy device that would grab the clock for us. This keeps other drivers from killing the networking PHYs when they disable their own clocks and trigger PLLD_PER's refcount going to 0. Signed-off-by:
-
Eric Anholt authored
The VPU clock is also the clock for our AXI bus, so we really can't disable it. This might have happened during boot if, for example, uart1 (aux_uart clock) probed and was then disabled before the other consumers of the VPU clock had probed. Signed-off-by:
-
