- 01 Jul, 2020 2 commits
-
-
Andy Lutomirski authored
The manual call to set_thread_area() via int $0x80 was missing any indication that the descriptor was a pointer, causing gcc to occasionally generate wrong code. Add the missing constraint. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/432968af67259ca92d68b774a731aff468eae610.1593192140.git.luto@kernel.org
-
Andy Lutomirski authored
A comment was unclear. Fix it. Fixes: 5e7ec857 ("selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE") Signed-off-by:
-
- 22 Jun, 2020 1 commit
-
-
Andy Lutomirski authored
If the kernel erroneously allows WRGSBASE and user code writes a negative value, paranoid_entry will get confused. Check for this by writing a negative value to GSBASE and doing SYSENTER with TF set. A successful run looks like: [RUN] SYSENTER with TF, invalid state, and GSBASE < 0 [SKIP] Illegal instruction A failed run causes a kernel hang, and I believe it's because we double-fault and then get a never ending series of page faults and, when we exhaust the double fault stack we double fault again, starting the process over. Signed-off-by:Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/f4f71efc91b9eae5e3dae21c9aee1c70cf5f370e.1590620529.git.luto@kernel.org
-
- 18 Jun, 2020 16 commits
-
-
Chang S. Bae authored
This validates that GS selector and base are independently preserved in ptrace commands. Suggested-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200528201402.1708239-17-sashal@kernel.org
-
Chang S. Bae authored
The test validates that the selector is not changed when a ptracer writes the ptracee's GS base. Originally-by:
-
Thomas Gleixner authored
Explain how the GS/FS based addressing can be utilized in user space applications along with the differences between the generic prctl() based GS/FS base control and the FSGSBASE version available on newer CPUs. Originally-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Andi Kleen authored
The kernel needs to explicitly enable FSGSBASE. So, the application needs to know if it can safely use these instructions. Just looking at the CPUID bit is not enough because it may be running in a kernel that does not enable the instructions. One way for the application would be to just try and catch the SIGILL. But that is difficult to do in libraries which may not want to overwrite the signal handlers of the main application. Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF aux vector. AT_HWCAP2 is already used by PPC for similar purposes. The application can access it open coded or by using the getauxval() function in newer versions of glibc. [ tglx: Massaged changelog ] Signed-off-by:
-
Andy Lutomirski authored
Now that FSGSBASE is fully supported, remove unsafe_fsgsbase, enable FSGSBASE by default, and add nofsgsbase to disable it. Signed-off-by:
-
Chang S. Bae authored
Without FSGSBASE, user space cannot change GSBASE other than through a PRCTL. The kernel enforces that the user space GSBASE value is postive as negative values are used for detecting the kernel space GSBASE value in the paranoid entry code. If FSGSBASE is enabled, user space can set arbitrary GSBASE values without kernel intervention, including negative ones, which breaks the paranoid entry assumptions. To avoid this, paranoid entry needs to unconditionally save the current GSBASE value independent of the interrupted context, retrieve and write the kernel GSBASE and unconditionally restore the saved value on exit. The restore happens either in paranoid_exit or in the special exit path of the NMI low level code. All other entry code pathes which use unconditional SWAPGS are not affected as they do not depend on the actual content. [ tglx: Massaged changelogs and comments ] Suggested-by:
H. Peter Anvin <hpa@zytor.com> Suggested-by:
-
Chang S. Bae authored
GSBASE is used to find per-CPU data in the kernel. But when GSBASE is unknown, the per-CPU base can be found from the per_cpu_offset table with a CPU NR. The CPU NR is extracted from the limit field of the CPUNODE entry in GDT, or by the RDPID instruction. This is a prerequisite for using FSGSBASE in the low level entry code. Also, add the GAS-compatible RDPID macro as binutils 2.23 do not support it. Support is added in version 2.27. [ tglx: Massaged changelog ] Suggested-by:
-
Chang S. Bae authored
When FSGSBASE is enabled, the GSBASE handling in paranoid entry will need to retrieve the kernel GSBASE which requires that the kernel page table is active. As the CR3 switch to the kernel page tables (PTI is active) does not depend on kernel GSBASE, move the CR3 switch in front of the GSBASE handling. Comment the EBX content while at it. No functional change. [ tglx: Rewrote changelog and comments ] Signed-off-by:
-
Tony Luck authored
Before enabling FSGSBASE the kernel could safely assume that the content of GS base was a user address. Thus any speculative access as the result of a mispredicted branch controlling the execution of SWAPGS would be to a user address. So systems with speculation-proof SMAP did not need to add additional LFENCE instructions to mitigate. With FSGSBASE enabled a hostile user can set GS base to a kernel address. So they can make the kernel speculatively access data they wish to leak via a side channel. This means that SMAP provides no protection. Add FSGSBASE as an additional condition to enable the fence-based SWAPGS mitigation. Signed-off-by:
-
Chang S. Bae authored
When FSGSBASE is enabled, copying threads and reading fsbase and gsbase using ptrace must read the actual values. When copying a thread, use save_fsgs() and copy the saved values. For ptrace, the bases must be read from memory regardless of the selector if FSGSBASE is enabled. [ tglx: Invoke __rdgsbase_inactive() with interrupts disabled ] [ luto: Massage changelog ] Suggested-by:
-
Andy Lutomirski authored
With the new FSGSBASE instructions, FS and GSABSE can be efficiently read and writen in __switch_to(). Use that capability to preserve the full state. This will enable user code to do whatever it wants with the new instructions without any kernel-induced gotchas. (There can still be architectural gotchas: movl %gs,%eax; movl %eax,%gs may change GSBASE if WRGSBASE was used, but users are expected to read the CPU manual before doing things like that.) This is a considerable speedup. It seems to save about 100 cycles per context switch compared to the baseline 4.6-rc1 behavior on a Skylake laptop. This is mostly due to avoiding the WRMSR operation. [ chang: 5~10% performance improvements were seen with a context switch benchmark that ran threads with different FS/GSBASE values (to the baseline 4.16). Minor edit on the changelog. ] [ tglx: Masaage changelog ] Signed-off-by:
-
Thomas Gleixner authored
save_fsgs_for_kvm() is invoked via vcpu_enter_guest() kvm_x86_ops.prepare_guest_switch(vcpu) vmx_prepare_switch_to_guest() save_fsgs_for_kvm() with preemption disabled, but interrupts enabled. The upcoming FSGSBASE based GS safe needs interrupts to be disabled. This could be done in the helper function, but that function is also called from switch_to() which has interrupts disabled already. Disable interrupts inside save_fsgs_for_kvm() and rename the function to current_save_fsgs() so it can be invoked from other places. Signed-off-by: -
Chang S. Bae authored
Add cpu feature conditional FSGSBASE access to the relevant helper functions. That allows to accelerate certain FS/GS base operations in subsequent changes. Note, that while possible, the user space entry/exit GSBASE operations are not going to use the new FSGSBASE instructions. The reason is that it would require additional storage for the user space value which adds more complexity to the low level code and experiments have shown marginal benefit. This may be revisited later but for now the SWAPGS based handling in the entry code is preserved except for the paranoid entry/exit code. To preserve the SWAPGS entry mechanism introduce __[rd|wr]gsbase_inactive() helpers. Note, for Xen PV, paravirt hooks can be added later as they might allow a very efficient but different implementation. [ tglx: Massaged changelog, convert it to noinstr and force inline native_swapgs() ] Signed-off-by:
-
Andi Kleen authored
[ luto: Rename the variables from FS and GS to FSBASE and GSBASE and make <asm/fsgsbase.h> safe to include on 32-bit kernels. ] Signed-off-by:
-
Andy Lutomirski authored
This is temporary. It will allow the next few patches to be tested incrementally. Setting unsafe_fsgsbase is a root hole. Don't do it. Signed-off-by:
-
Chang S. Bae authored
When a ptracer writes a ptracee's FS/GSBASE with a different value, the selector is also cleared. This behavior is not correct as the selector should be preserved. Update only the base value and leave the selector intact. To simplify the code further remove the conditional checking for the same value as this code is not performance critical. The only recognizable downside of this change is when the selector is already nonzero on write. The base will be reloaded according to the selector. But the case is highly unexpected in real usages. [ tglx: Massage changelog ] Suggested-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check -
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: 9762dc14 ("samples: add binderfs sample program Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f624 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dan Williams: "Small collection of cleanups to rework usage of ->queuedata and the GUID api" * tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using ->queuedata nvdimm/btt: stop using ->queuedata nvdimm/blk: stop using ->queuedata libnvdimm: Replace guid_copy() with import_guid() where it makes sense
-
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: f5b5a164 ("Add sample notification program") Signed-off-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fix from Darrick Wong: "A single iomap bug fix for a variable type mistake on 32-bit architectures, fixing an integer overflow problem in the unshare actor" * tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Fix unsharing of an extent >2GB on a 32-bit machine
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "We've settled down into the bugfix phase; this one fixes a resource leak on an error bailout path" * tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
-
