Skip to content

L
linux
Switch branch/tag
  1. 15 Jul, 2022 7 commits
  3. 14 Jul, 2022 7 commits
  5. 13 Jul, 2022 4 commits
  7. 12 Jul, 2022 6 commits
  9. 11 Jul, 2022 8 commits
    • Xu Kuohai's avatar
      bpf, arm64: Add bpf trampoline for arm64 · efc9909f
      Xu Kuohai authored 
      This is arm64 version of commit fec56f58 ("bpf: Introduce BPF
trampoline"). A bpf trampoline converts native calling convention to bpf
calling convention and is used to implement various bpf features, such
as fentry, fexit, fmod_ret and struct_ops.

This patch does essentially the same thing that bpf trampoline does on x86.

Tested on Raspberry Pi 4B and qemu:

 #18 /1     bpf_tcp_ca/dctcp:OK
 #18 /2     bpf_tcp_ca/cubic:OK
 #18 /3     bpf_tcp_ca/invalid_license:OK
 #18 /4     bpf_tcp_ca/dctcp_fallback:OK
 #18 /5     bpf_tcp_ca/rel_setsockopt:OK
 #18        bpf_tcp_ca:OK
 #51 /1     dummy_st_ops/dummy_st_ops_attach:OK
 #51 /2     dummy_st_ops/dummy_init_ret_value:OK
 #51 /3     dummy_st_ops/dummy_init_ptr_arg:OK
 #51 /4     dummy_st_ops/dummy_multiple_args:OK
 #51        dummy_st_ops:OK
 #57 /1     fexit_bpf2bpf/target_no_callees:OK
 #57 /2     fexit_bpf2bpf/target_yes_callees:OK
 #57 /3     fexit_bpf2bpf/func_replace:OK
 #57 /4     fexit_bpf2bpf/func_replace_verify:OK
 #57 /5     fexit_bpf2bpf/func_sockmap_update:OK
 #57 /6     fexit_bpf2bpf/func_replace_return_code:OK
 #57 /7     fexit_bpf2bpf/func_map_prog_compatibility:OK
 #57 /8     fexit_bpf2bpf/func_replace_multi:OK
 #57 /9     fexit_bpf2bpf/fmod_ret_freplace:OK
 #57        fexit_bpf2bpf:OK
 #237       xdp_bpf2bpf:OK
Signed-off-by: default avatarXu Kuohai <xukuohai@huawei.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Acked-by: default avatarKP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-5-xukuohai@huawei.com
      efc9909f
    • Xu Kuohai's avatar
      bpf, arm64: Implement bpf_arch_text_poke() for arm64 · b2ad54e1
      Xu Kuohai authored 
      Implement bpf_arch_text_poke() for arm64, so bpf prog or bpf trampoline
can be patched with it.

When the target address is NULL, the original instruction is patched to
a NOP.

When the target address and the source address are within the branch
range, the original instruction is patched to a bl instruction to the
target address directly.

To support attaching bpf trampoline to both regular kernel function and
bpf prog, we follow the ftrace patchsite way for bpf prog. That is, two
instructions are inserted at the beginning of bpf prog, the first one
saves the return address to x9, and the second is a nop which will be
patched to a bl instruction when a bpf trampoline is attached.

However, when a bpf trampoline is attached to bpf prog, the distance
between target address and source address may exceed 128MB, the maximum
branch range, because bpf trampoline and bpf prog are allocated
separately with vmalloc. So long jump should be handled.

When a bpf prog is constructed, a plt pointing to empty trampoline
dummy_tramp is placed at the end:

        bpf_prog:
                mov x9, lr
                nop // patchsite
                ...
                ret

        plt:
                ldr x10, target
                br x10
        target:
                .quad dummy_tramp // plt target

This is also the state when no trampoline is attached.

When a short-jump bpf trampoline is attached, the patchsite is patched to
a bl instruction to the trampoline directly:

        bpf_prog:
                mov x9, lr
                bl <short-jump bpf trampoline address> // patchsite
                ...
                ret

        plt:
                ldr x10, target
                br x10
        target:
                .quad dummy_tramp // plt target

When a long-jump bpf trampoline is attached, the plt target is filled with
the trampoline address and the patchsite is patched to a bl instruction to
the plt:

        bpf_prog:
                mov x9, lr
                bl plt // patchsite
                ...
                ret

        plt:
                ldr x10, target
                br x10
        target:
                .quad <long-jump bpf trampoline address>

dummy_tramp is used to prevent another CPU from jumping to an unknown
location during the patching process, making the patching process easier.

The patching process is as follows:

1. when neither the old address or the new address is a long jump, the
   patchsite is replaced with a bl to the new address, or nop if the new
   address is NULL;

2. when the old address is not long jump but the new one is, the
   branch target address is written to plt first, then the patchsite
   is replaced with a bl instruction to the plt;

3. when the old address is long jump but the new one is not, the address
   of dummy_tramp is written to plt first, then the patchsite is replaced
   with a bl to the new address, or a nop if the new address is NULL;

4. when both the old address and the new address are long jump, the
   new address is written to plt and the patchsite is not changed.
Signed-off-by: default avatarXu Kuohai <xukuohai@huawei.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: default avatarKP Singh <kpsingh@kernel.org>
Reviewed-by: default avatarJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-4-xukuohai@huawei.com
      b2ad54e1
    • Xu Kuohai's avatar
      arm64: Add LDR (literal) instruction · f1e8a24e
      Xu Kuohai authored 
      Add LDR (literal) instruction to load data from address relative to PC.
This instruction will be used to implement long jump from bpf prog to
bpf trampoline in the follow-up patch.

The instruction encoding:

    3       2   2     2                                     0        0
    0       7   6     4                                     5        0
+-----+-------+---+-----+-------------------------------------+--------+
| 0 x | 0 1 1 | 0 | 0 0 |                imm19                |   Rt   |
+-----+-------+---+-----+-------------------------------------+--------+

for 32-bit, variant x == 0; for 64-bit, x == 1.

branch_imm_common() is used to check the distance between pc and target
address, since it's reused by this patch and LDR (literal) is not a branch
instruction, rename it to label_imm_common().
Signed-off-by: default avatarXu Kuohai <xukuohai@huawei.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: default avatarWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-3-xukuohai@huawei.com
      f1e8a24e
    • Xu Kuohai's avatar
      bpf: Remove is_valid_bpf_tramp_flags() · 535a57a7
      Xu Kuohai authored 
      Before generating bpf trampoline, x86 calls is_valid_bpf_tramp_flags()
to check the input flags. This check is architecture independent.
So, to be consistent with x86, arm64 should also do this check
before generating bpf trampoline.

However, the BPF_TRAMP_F_XXX flags are not used by user code and the
flags argument is almost constant at compile time, so this run time
check is a bit redundant.

Remove is_valid_bpf_tramp_flags() and add some comments to the usage of
BPF_TRAMP_F_XXX flags, as suggested by Alexei.
Signed-off-by: default avatarXu Kuohai <xukuohai@huawei.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-2-xukuohai@huawei.com
      535a57a7
    • Liu Jian's avatar
      skmsg: Fix invalid last sg check in sk_msg_recvmsg() · 9974d37e
      Liu Jian authored 
      In sk_psock_skb_ingress_enqueue function, if the linear area + nr_frags +
frag_list of the SKB has NR_MSG_FRAG_IDS blocks in total, skb_to_sgvec
will return NR_MSG_FRAG_IDS, then msg->sg.end will be set to
NR_MSG_FRAG_IDS, and in addition, (NR_MSG_FRAG_IDS - 1) is set to the last
SG of msg. Recv the msg in sk_msg_recvmsg, when i is (NR_MSG_FRAG_IDS - 1),
the sk_msg_iter_var_next(i) will change i to 0 (not NR_MSG_FRAG_IDS), the
judgment condition "msg_rx->sg.start==msg_rx->sg.end" and
"i != msg_rx->sg.end" can not work.

As a result, the processed msg cannot be deleted from ingress_msg list.
But the length of all the sge of the msg has changed to 0. Then the next
recvmsg syscall will process the msg repeatedly, because the length of sge
is 0, the -EFAULT error is always returned.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: default avatarLiu Jian <liujian56@huawei.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220628123616.186950-1-liujian56@huawei.com
      9974d37e
    • Jilin Yuan's avatar
      fddi/skfp: fix repeated words in comments · edb2c347
      Jilin Yuan authored 
      Delete the redundant word 'test'.
Signed-off-by: default avatarJilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edb2c347
    • Jilin Yuan's avatar
      ethernet/via: fix repeated words in comments · 1377a5b2
      Jilin Yuan authored 
      Delete the redundant word 'driver'.
Signed-off-by: default avatarJilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1377a5b2
    • sewookseo's avatar
      net: Find dst with sk's xfrm policy not ctl_sk · e22aa148
      sewookseo authored 
      If we set XFRM security policy by calling setsockopt with option
IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock'
struct. However tcp_v6_send_response doesn't look up dst_entry with the
actual socket but looks up with tcp control socket. This may cause a
problem that a RST packet is sent without ESP encryption & peer's TCP
socket can't receive it.
This patch will make the function look up dest_entry with actual socket,
if the socket has XFRM policy(sock_policy), so that the TCP response
packet via this function can be encrypted, & aligned on the encrypted
TCP socket.

Tested: We encountered this problem when a TCP socket which is encrypted
in ESP transport mode encryption, receives challenge ACK at SYN_SENT
state. After receiving challenge ACK, TCP needs to send RST to
establish the socket at next SYN try. But the RST was not encrypted &
peer TCP socket still remains on ESTABLISHED state.
So we verified this with test step as below.
[Test step]
1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED).
2. Client tries a new connection on the same TCP ports(src & dst).
3. Server will return challenge ACK instead of SYN,ACK.
4. Client will send RST to server to clear the SOCKET.
5. Client will retransmit SYN to server on the same TCP ports.
[Expected result]
The TCP connection should be established.

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sehee Lee <seheele@google.com>
Signed-off-by: default avatarSewook Seo <sewookseo@google.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e22aa148
  11. 09 Jul, 2022 8 commits
    • Jakub Kicinski's avatar
      Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next · 0076cad3
      Jakub Kicinski authored 
      Daniel Borkmann says:

====================
pull-request: bpf-next 2022-07-09

We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).

The main changes are:

1) Add new way for performing BTF type queries to BPF, from Daniel Müller.

2) Add inlining of calls to bpf_loop() helper when its function callback is
   statically known, from Eduard Zingerman.

3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.

4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
   hooks, from Stanislav Fomichev.

5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.

6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.

7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
   selftests, from Magnus Karlsson & Maciej Fijalkowski.

8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.

9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.

10) Sockmap optimizations around throughput of UDP transmissions which have been
    improved by 61%, from Cong Wang.

11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.

12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.

13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.

14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
    macro, from James Hilliard.

15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.

16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
  selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
  bpf: Correctly propagate errors up from bpf_core_composites_match
  libbpf: Disable SEC pragma macro on GCC
  bpf: Check attach_func_proto more carefully in check_return_code
  selftests/bpf: Add test involving restrict type qualifier
  bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
  MAINTAINERS: Add entry for AF_XDP selftests files
  selftests, xsk: Rename AF_XDP testing app
  bpf, docs: Remove deprecated xsk libbpf APIs description
  selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
  libbpf, riscv: Use a0 for RC register
  libbpf: Remove unnecessary usdt_rel_ip assignments
  selftests/bpf: Fix few more compiler warnings
  selftests/bpf: Fix bogus uninitialized variable warning
  bpftool: Remove zlib feature test from Makefile
  libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
  libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
  libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
  selftests/bpf: Add type match test against kernel's task_struct
  selftests/bpf: Add nested type to type based tests
  ...
====================

Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0076cad3
    • Linus Walleij's avatar
      ixp4xx_eth: Set MAC address from device tree · 877d4e3c
      Linus Walleij authored 
      If there is a MAC address specified in the device tree, then
use it. This is already perfectly legal to specify in accordance
with the generic ethernet-controller.yaml schema.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      877d4e3c
    • Linus Walleij's avatar
      ixp4xx_eth: Fall back to random MAC address · b3ba206c
      Linus Walleij authored 
      If the firmware does not provide a MAC address to the driver,
fall back to generating a random MAC address.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b3ba206c
    • Eric Dumazet's avatar
      af_unix: fix unix_sysctl_register() error path · 44ac441a
      Eric Dumazet authored 
      We want to kfree(table) if @table has been kmalloced,
ie for non initial network namespace.

Fixes: 849d5aa3 ("af_unix: Do not call kmemdup() for init_net's sysctl table.")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      44ac441a
    • David S. Miller's avatar
      Merge branch 'mptcp-selftest-improvements-and-header-tweak' · be587adb
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: Self test improvements and a header tweak

Patch 1 moves a definition to a header so it can be used in a struct
declaration.

Patch 2 adjusts a time threshold for a selftest that runs much slower on
debug kernels (and even more on slow CI infrastructure), to reduce
spurious failures.

Patches 3 & 4 improve userspace PM test coverage.

Patches 5 & 6 clean up output from a test script and selftest helper
tool.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      be587adb
    • Geliang Tang's avatar
      selftests: mptcp: update pm_nl_ctl usage header · 65ebc667
      Geliang Tang authored 
      The usage header of pm_nl_ctl command doesn't match with the context. So
this patch adds the missing userspace PM keywords 'ann', 'rem', 'csf',
'dsf', 'events' and 'listen' in it.
Reviewed-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65ebc667
    • Geliang Tang's avatar
      selftests: mptcp: avoid Terminated messages in userspace_pm · 507719cd
      Geliang Tang authored 
      There're some 'Terminated' messages in the output of userspace pm tests
script after killing './pm_nl_ctl events' processes:

Created network namespaces ns1, ns2         			[OK]
./userspace_pm.sh: line 166: 13735 Terminated              ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13737 Terminated              ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv4 MPTCP Connection ns2 => ns1    		[OK]
./userspace_pm.sh: line 166: 13753 Terminated              ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13755 Terminated              ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv6 MPTCP Connection ns2 => ns1    		[OK]
ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token    		[OK]

This patch adds a helper kill_wait(), in it using 'wait $pid 2>/dev/null'
commands after 'kill $pid' to avoid printing out these Terminated messages.
Use this helper instead of using 'kill $pid'.
Reviewed-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      507719cd
    • Geliang Tang's avatar
      selftests: mptcp: userspace pm subflow tests · 5e986ec4
      Geliang Tang authored 
      This patch adds userspace pm subflow tests support for mptcp_join.sh
script. Add userspace pm create subflow and destroy test cases in
userspace_tests().
Reviewed-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e986ec4
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7