- 24 Mar, 2009 16 commits
-
-
Darius Augulis authored
Fix small bugs and add some omptimization in IMX UDC Gadget. Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Werner Cornelius authored
Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer <http://err.no/src/TEMPer.c> Signed-off-by:Werner Cornelius <Werner.Cornelius@cornelius-consult.de> Signed-off-by:
Boris Hajduk <boris@hajduk.org> Signed-off-by:
-
Huang Weiyi authored
Removed duplicated #include in drivers/usb/gadget/ci13xxx_udc.c Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
-
Julia Lawall authored
The functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) are moved from include/linux/usb.h to include/linux/usb/ch9.h. include/linux/usb/ch9.h makes more sense for these functions because they only depend on constants that are defined in this file. Signed-off-by:
-
Robert Jarzmik authored
Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by:
-
Robert Jarzmik authored
On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by:
-
Robert Jarzmik authored
Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by:
-
Robert Jarzmik authored
Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by:
-
Pete Zaitcev authored
The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer <aric at sdgsystems.com>) Signed-off-by:
-
Alan Stern authored
Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by:
Melchior FRANZ <melchior.franz@gmail.com> Tested-by:
-
- 23 Mar, 2009 11 commits
-
-
Linus Torvalds authored
-
Kyle McMartin authored
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jody McIntyre authored
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by:
Jody McIntyre <scjody@sun.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
-
Miklos Szeredi authored
This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
-
Kumar Gala authored
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Anton Vorontsov authored
commit b1c4a9dd ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
David Brownell authored
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 22 Mar, 2009 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: improve seed in randconfig kconfig: fix randconfig for choice blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h
-
Gertjan van Wingerde authored
Update all previous incarnations of my email address to the correct one. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Tyler Hicks authored
If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being specified as mount options, a NULL pointer dereference of crypt_stat was possible during lookup. This patch moves the crypt_stat assignment into ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat will not be NULL before we attempt to dereference it. Thanks to Dan Carpenter and his static analysis tool, smatch, for finding this bug. Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by:
Dustin Kirkland <kirkland@canonical.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Tyler Hicks authored
When allocating the memory used to store the eCryptfs header contents, a single, zeroed page was being allocated with get_zeroed_page(). However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is stored in the file's private_data->crypt_stat->num_header_bytes_at_front field. ecryptfs_write_metadata_to_contents() was using num_header_bytes_at_front to decide how many bytes should be written to the lower filesystem for the file header. Unfortunately, at least 8K was being written from the page, despite the chance of the single, zeroed page being smaller than 8K. This resulted in random areas of kernel memory being written between the 0x1000 and 0x1FFF bytes offsets in the eCryptfs file headers if PAGE_SIZE was 4K. This patch allocates a variable number of pages, calculated with num_header_bytes_at_front, and passes the number of allocated pages along to ecryptfs_write_metadata_to_contents(). Thanks to Florian Streibelt for reporting the data leak and working with me to find the problem. 2.6.28 is the only kernel release with this vulnerability. Corresponds to CVE-2009-0787 Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: Greg KH <greg@kroah.com> Cc: dann frazier <dannf@dannf.org> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Florian Streibelt <florian@f-streibelt.de> Cc: stable@kernel.org Signed-off-by:
-
Benjamin Herrenschmidt authored
This fixes a regression introduced when we switched to using the core pci_set_power_state(). The chip seems to need the state to be written over and over again until it sticks, so we do that. Note that the code is a bit blunt, without timeout, etc... but that's pretty much because I put back in there the code exactly as it used to be before the regression. I still add a call to pci_set_power_state() at the end so that ACPI gets called appropriately on x86. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Raymond Wooninck <tittiatcoke@gmail.com> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 21 Mar, 2009 2 commits
-
-
Ilya Yanok authored
Signed-off-by:
Ilya Yanok <yanok@emcraft.com> Signed-off-by:
-
Maciej Sosnowski authored
In two dca files copyright and license headers are missing. This patch adds them there. Signed-off-by:
Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by:
-
- 20 Mar, 2009 5 commits
-
-
-
Jouni Malinen authored
NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers did not verify whether a function pointer is NULL (not supported by the driver) before trying to call the function. The former nl80211 command is available for unprivileged users, too, so this can potentially allow normal users to kill networking (or worse..) if mac80211 is built without CONFIG_MAC80211_MESH=y. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Stephen Hemminger authored
Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Sathya Perla authored
This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
-
Sathya Perla authored
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by:
-
