Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.

Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Update enic maintainers.
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Link: https://lore.kernel.org/r/20221028042159.735670-1-govind.varadar@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I missed one of the families in OvS when annotating .resv_start_op.
This triggers the warning added in commit ce48ebdd ("genetlink:
limit the use of validation workarounds to old ops").

Reported-by: syzbot+40eb8c0447c0e47a7e9b@syzkaller.appspotmail.com
Fixes: 9c5d03d3 ("genetlink: start to validate reserved header bytes")
Link: https://lore.kernel.org/r/20221028032501.2724270-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).

The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.

Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of generic description, mention what reset_lock actually
protects i.e. lock to serialize xmit and tx_timeout execution.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

kmemleak reported memory leaks in dsa_loop_init():

kmemleak: 12 new suspected memory leaks

unreferenced object 0xffff8880138ce000 (size 2048):
  comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s)
  backtrace:
    [<000000006a94f1d5>] kmalloc_trace+0x26/0x60
    [<00000000a9c44622>] phy_device_create+0x5d/0x970
    [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0
    [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0
    [<000000008a834798>] fixed_phy_register+0x84/0xb0
    [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop]
    ...

There are two reasons for memleak in dsa_loop_init().

First, fixed_phy_register() create and register phy_device:

fixed_phy_register()
  get_phy_device()
    phy_device_create() # freed by phy_device_free()
  phy_device_register() # freed by phy_device_remove()

But fixed_phy_unregister() only calls phy_device_remove().
So the memory allocated in phy_device_create() is leaked.

Second, when mdio_driver_register() fail in dsa_loop_init(),
it just returns and there is no cleanup for phydevs.

Fix the problems by catching the error of mdio_driver_register()
in dsa_loop_init(), then calling both fixed_phy_unregister() and
phy_device_free() to release phydevs.
Also add a function for phydevs cleanup to avoid duplacate.

Fixes: 98cd1552 ("net: dsa: Mock-up driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from 802.15.4 (Zigbee et al).

  Current release - regressions:

   - ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1

  Current release - new code bugs:

   - mptcp: fix abba deadlock on fastopen

   - eth: stmmac: rk3588: allow multiple gmac controllers in one system

  Previous releases - regressions:

   - ip: rework the fix for dflt addr selection for connected nexthop

   - net: couple more fixes for misinterpreting bits in struct page
     after the signature was added

  Previous releases - always broken:

   - ipv6: ensure sane device mtu in tunnels

   - openvswitch: switch from WARN to pr_warn on a user-triggerable path

   - ethtool: eeprom: fix null-deref on genl_info in dump

   - ieee802154: more return code fixes for corner cases in
     dgram_sendmsg

   - mac802154: fix link-quality-indicator recording

   - eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
     offload

   - eth: fec: limit register access on i.MX6UL

   - eth: bcm4908_enet: update TX stats after actual transmission

   - can: rcar_canfd: improve IRQ handling for RZ/G2L

  Misc:

   - genetlink: piggy back on the newly added resv_op_start to enforce
     more sanity checks on new commands"

* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  net: enetc: survive memory pressure without crashing
  kcm: do not sense pfmemalloc status in kcm_sendpage()
  net: do not sense pfmemalloc status in skb_append_pagefrags()
  net/mlx5e: Fix macsec sci endianness at rx sa update
  net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
  net/mlx5e: Fix macsec rx security association (SA) update/delete
  net/mlx5e: Fix macsec coverity issue at rx sa update
  net/mlx5: Fix crash during sync firmware reset
  net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
  net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
  net/mlx5e: TC, Reject forwarding from internal port to internal port
  net/mlx5: Fix possible use-after-free in async command interface
  net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
  net/mlx5e: Update restore chain id for slow path packets
  net/mlx5e: Extend SKB room check to include PTP-SQ
  net/mlx5: DR, Fix matcher disconnect error flow
  net/mlx5: Wait for firmware to enable CRS before pci_restore_state
  net/mlx5e: Do not increment ESN when updating IPsec ESN state
  netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
  netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
  ...

Pull execve fixes from Kees Cook:

 - Fix an ancient signal action copy race (Bernd Edlinger)

 - Fix a memory leak in ELF loader, when under memory pressure (Li
   Zetao)

* tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  fs/binfmt_elf: Fix memory leak in load_elf_binary()
  exec: Copy oldsighand->action under spin-lock

Pull hardening fixes from Kees Cook:

 - Fix older Clang vs recent overflow KUnit test additions (Nick
   Desaulniers, Kees Cook)

 - Fix kern-doc visibility for overflow helpers (Kees Cook)

* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  overflow: Refactor test skips for Clang-specific issues
  overflow: disable failing tests for older clang versions
  overflow: Fix kern-doc markup for functions

Pull media fixes from Mauro Carvalho Chehab:
 "A bunch of patches addressing issues in the vivid driver and adding
  new checks in V4L2 to validate the input parameters from some ioctls"

* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vivid.rst: loop_video is set on the capture devnode
  media: vivid: set num_in/outputs to 0 if not supported
  media: vivid: drop GFP_DMA32
  media: vivid: fix control handler mutex deadlock
  media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
  media: v4l2-dv-timings: add sanity checks for blanking values
  media: vivid: dev->bitmap_cap wasn't freed in all cases
  media: vivid: s_fbuf: add more sanity checks

Pull fscrypt fix from Eric Biggers:
 "Fix a memory leak that was introduced by a change that went into -rc1"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: fix keyring memory leak on mount failure

Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.

An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.

This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).

The hardware guide explains this best:

| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
|   value, it indicates that all BDs in the ring have been prepared and
|   hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
|   indicate N BDs have been prepared. Note that hardware cannot start if
|   only a single buffer is prepared due to the restrictions described in
|   (2).
| - Software may write consumer index to match producer index anytime
|   while the ring is operational to indicate all received BDs prior have
|   been processed and new BDs prepared for hardware.

Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.

When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.

The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.

To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.

The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to changes done in TCP in blamed commit.
We should not sense pfmemalloc status in sendpage() methods.

Fixes: 32614006 ("tcp: TX zerocopy should not sense pfmemalloc status")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040637.1107703-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.

In commit 32614006 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.

We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:

BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags

write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:323 [inline]
lru_add_fn+0x327/0x410 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
lru_add_drain_cpu+0x73/0x250 mm/swap.c:669
lru_add_drain+0x21/0x60 mm/swap.c:773
free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311
tlb_batch_pages_flush mm/mmu_gather.c:59 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:256 [inline]
tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263
tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363
exit_mmap+0x190/0x4d0 mm/mmap.c:3098
__mmput+0x27/0x1b0 kernel/fork.c:1185
mmput+0x3d/0x50 kernel/fork.c:1207
copy_process+0x19fc/0x2100 kernel/fork.c:2518
kernel_clone+0x166/0x550 kernel/fork.c:2671
__do_sys_clone kernel/fork.c:2812 [inline]
__se_sys_clone kernel/fork.c:2796 [inline]
__x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1817 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2432 [inline]
skb_fill_page_desc include/linux/skbuff.h:2453 [inline]
skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974
unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0xffffea00058fc188

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022

Fixes: 32614006 ("tcp: TX zerocopy should not sense pfmemalloc status")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit at rx sa update operation passes the sci object
attribute, in the wrong endianness and not as expected by the HW
effectively create malformed hw sa context in case of update rx sa
consequently, HW produces unexpected MACsec packets which uses this
sa.

Fix by passing sci to create macsec object with the correct endianness,
while at it add __force u64 to prevent sparse check error of type
"sparse: error: incorrect type in assignment".

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-16-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit produces a sparse check error of type
"sparse: error: restricted __be64 degrades to integer". The
offending line wrongly did a bitwise operation between two different
storage types one of 64 bit when the other smaller side is 16 bit
which caused the above sparse error, furthermore bitwise operation
usage here is wrong in the first place as the constant MACSEC_PORT_ES
is not a bitwise field.

Fix by using the right mask to get the lower 16 bit if the sci number,
and use comparison operator '==' instead of bitwise '&' operator.

Fixes: 3b20949c ("net/mlx5e: Add MACsec RX steering rules")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-15-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit adds the support for update/delete MACsec Rx SA,
naturally, these operations need to check if the SA in question exists
to update/delete the SA and return error code otherwise, however they
do just the opposite i.e. return with error if the SA exists

Fix by change the check to return error in case the SA in question does
not exist, adjust error message and code accordingly.

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-14-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit at update rx sa operation passes object attributes
to MACsec object create function without initializing/setting all
attributes fields leaving some of them with garbage values, therefore
violating the implicit assumption at create object function, which
assumes that all input object attributes fields are set.

Fix by initializing the object attributes struct to zero, thus leaving
unset fields with the legal zero value.

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-13-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When setting Bluefield to DPU NIC mode using mlxconfig tool +  sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.

Fixes: 5ec69744 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Suresh Devarakonda <ramad@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.

Fixes: 6181e5cb ("devlink: add support for reporter recovery completion")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On multi table split the driver creates a new attr instance with
data being copied from prev attr instance zeroing action flags.
Also need to reset dests properties to avoid incorrect dests per attr.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-10-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reject TC rules that forward from internal port to internal port
as it is not supported.

This include rules that are explicitly have internal port as
the filter device as well as rules that apply on tunnel interfaces
as the route device for the tunnel interface can be an internal
port.

Fixes: 27484f71 ("net/mlx5e: Offload tc rules that redirect to ovs internal port")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-9-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5_cmd_cleanup_async_ctx should return only after all its callback
handlers were completed. Before this patch, the below race between
mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and
lead to a use-after-free:

1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e.
   elevated by 1, a single inflight callback).
2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1.
3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and
   is about to call wake_up().
4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns
   immediately as the condition (num_inflight == 0) holds.
5. mlx5_cmd_cleanup_async_ctx returns.
6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx
   object.
7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed
   object.

Fix it by syncing using a completion object. Mark it completed when
num_inflight reaches 0.

Trace:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270
Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0

CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl+0x57/0x7d
 print_report.cold+0x2d5/0x684
 ? do_raw_spin_lock+0x23d/0x270
 kasan_report+0xb1/0x1a0
 ? do_raw_spin_lock+0x23d/0x270
 do_raw_spin_lock+0x23d/0x270
 ? rwlock_bug.part.0+0x90/0x90
 ? __delete_object+0xb8/0x100
 ? lock_downgrade+0x6e0/0x6e0
 _raw_spin_lock_irqsave+0x43/0x60
 ? __wake_up_common_lock+0xb9/0x140
 __wake_up_common_lock+0xb9/0x140
 ? __wake_up_common+0x650/0x650
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kasan_set_track+0x21/0x30
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kfree+0x1ba/0x520
 ? do_raw_spin_unlock+0x54/0x220
 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core]
 ? dump_command+0xcc0/0xcc0 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x400/0x400
 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 ? irq_release+0x140/0x140 [mlx5_core]
 irq_int_handler+0x19/0x30 [mlx5_core]
 __handle_irq_event_percpu+0x1f2/0x620
 handle_irq_event+0xb2/0x1d0
 handle_edge_irq+0x21e/0xb00
 __common_interrupt+0x79/0x1a0
 common_interrupt+0x78/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x42/0x60
Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00
RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110
RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc
RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3
R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005
R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000
 ? default_idle_call+0xcc/0x450
 default_idle_call+0xec/0x450
 do_idle+0x394/0x450
 ? arch_cpu_idle_exit+0x40/0x40
 ? do_idle+0x17/0x450
 cpu_startup_entry+0x19/0x20
 start_secondary+0x221/0x2b0
 ? set_cpu_sibling_map+0x2070/0x2070
 secondary_startup_64_no_verify+0xcd/0xdb
 </TASK>

Allocated by task 49502:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 kvmalloc_node+0x48/0xe0
 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core]
 mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 49502:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x11d/0x1b0
 kfree+0x1ba/0x520
 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: e355477e ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5 SQs must select the timestamp format explicitly according to the
active clock mode, select the current active timestamp mode so ASO SQ create
will succeed.

This fixes the following error prints when trying to create ipsec ASO SQ
while the timestamp format is real time mode.

mlx5_cmd_out_err:778:(pid 34874): CREATE_SQ(0x904) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xd61c0b), err(-22)
mlx5_aso_create_sq:285:(pid 34874): Failed to open aso wq sq, err=-22
mlx5e_ipsec_init:436:(pid 34874): IPSec initialization failed, -22

Fixes: cdd04f4d ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-7-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently encap slow path rules just forward to software without
setting the chain id miss register, so driver doesn't restore
the chain, and packets hitting this rule will restart from tc chain
0 instead of continuing to the chain the encap rule was on.

Fix this by setting the chain id miss register to the chain id mapping.

Fixes: 8f1e0b97 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-6-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When tx_port_ts is set, the driver diverts all UPD traffic over PTP port
to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives.
When the packet size is greater then MTU, the firmware might drop it and
the packet won't be transmitted to the wire, hence the wire-CQE won't
reach the driver. In this case the SKBs are accumulated in the SKB fifo.
Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is
full, driver stops the queue resulting in a TX timeout. Devlink
TX-reporter can recover from it.

Fixes: 1880bc4e ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When 2nd flow rules arrives, it will merge together with the
1st one if matcher criteria is the same.

If merge fails, driver will rollback the merge contents, and
reject the 2nd rule. At rollback stage, matcher can't be
disconnected unconditionally, otherise the 1st rule can't be
hit anymore.

Add logic to check if the matcher should be disconnected or not.

Fixes: cc2295cd ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers")
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-4-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After firmware reset driver should verify firmware already enabled CRS
and became responsive to pci config cycles before restoring pci state.
Fix that by waiting till device_id is readable through PCI again.

Fixes: eabe8e5e ("net/mlx5: Handle sync reset now event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-3-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).

To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
  nic-offload = yes
  replay-window = 32
  esn = yes
  salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
  netperf -H <device-under-test> -t TCP_STREAM -l 20000

When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.

 seq_hi = xfrm_replay_seqhi(seq_bottom)
 new esn in NIC = seq_hi + 1

The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.

Fixes: cb010083 ("net/mlx5: IPSec, Add support for ESN")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Zhengchao Shao says:

====================
fix some issues in netdevsim driver

When strace tool is used to perform memory injection, memory leaks and
files not removed issues are found. Fix them.
====================

Link: https://lore.kernel.org/r/20221026014642.116261-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove dir in nsim_dev_debugfs_init() when creating ports dir failed.
Otherwise, the netdevsim device will not be created next time. Kernel
reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim'
already present!

Fixes: ab1d0cc0 ("netdevsim: change debugfs tree topology")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If some items in nsim_dev_resources_register() fail, memory leak will
occur. The following is the memory leak information.

unreferenced object 0xffff888074c02600 (size 128):
  comm "echo", pid 8159, jiffies 4294945184 (age 493.530s)
  hex dump (first 32 bytes):
    40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00  @G..............
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    [<0000000011a31c98>] kmalloc_trace+0x22/0x60
    [<0000000027384c69>] devl_resource_register+0x144/0x4e0
    [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260
    [<000000007d1f448c>] really_probe+0x20b/0xb10
    [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0
    [<00000000077e0351>] driver_probe_device+0x49/0x140
    [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0
    [<000000008538f359>] bus_for_each_drv+0x151/0x1d0
    [<0000000038e09747>] __device_attach+0x1c9/0x4e0
    [<00000000dd86e533>] bus_probe_device+0x1d5/0x280
    [<00000000839bea35>] device_add+0xae0/0x1cb0
    [<000000009c2abf46>] new_device_store+0x3b6/0x5f0
    [<00000000fb823d7f>] bus_attr_store+0x72/0xa0
    [<000000007acc4295>] sysfs_kf_write+0x106/0x160
    [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0
    [<0000000075eb41bf>] vfs_write+0x8f0/0xc80

Fixes: 37923ed6 ("netdevsim: Add simple FIB resource controller via devlink")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If device_register() failed in nsim_bus_dev_new(), the value of reference
in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be
released.

unreferenced object 0xffff88810352c480 (size 16):
  comm "echo", pid 5691, jiffies 4294945921 (age 133.270s)
  hex dump (first 16 bytes):
    6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00  netdevsim1......
  backtrace:
    [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0
    [<0000000094ca4fc8>] kvasprintf+0xc3/0x160
    [<00000000aad09bcc>] kvasprintf_const+0x55/0x180
    [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150
    [<000000007c1a5d70>] dev_set_name+0xbb/0xf0
    [<00000000ad0d126b>] device_add+0x1f8/0x1cb0
    [<00000000c222ae24>] new_device_store+0x3b6/0x5e0
    [<0000000043593421>] bus_attr_store+0x72/0xa0
    [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160
    [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0
    [<00000000770b66e2>] vfs_write+0x8f0/0xc80
    [<0000000078bb39be>] ksys_write+0x106/0x210
    [<00000000005e55a4>] do_syscall_64+0x35/0x80
    [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 40e4fe4c ("netdevsim: move device registration and related code to bus.c")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221026015405.128795-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-10-27

Anssi Hannula fixes the use of the completions in the kvaser_usb
driver.

Biju Das contributes 2 patches for the rcar_canfd driver. A IRQ storm
that can be triggered by high CAN bus load and channel specific IRQ
handlers are fixed.

Yang Yingliang fixes the j1939 transport protocol by moving a
kfree_skb() out of a spin_lock_irqsave protected section.

* tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()
  can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L
  can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive
  can: kvaser_usb: Fix possible completions during init_completion
====================

Link: https://lore.kernel.org/r/20221027114356.1939821-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.

This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx().
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Nicolas Dichtel says:

====================
ip: rework the fix for dflt addr selection for connected nexthop"

This series reworks the fix that is reverted in the second commit.
As Julian explained, nhc_scope is related to nhc_gw, it's not the scope of
the route.
====================

Link: https://lore.kernel.org/r/20221020100952.8748-1-nicolas.dichtel@6wind.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but
fib_info_update_nhc_saddr() needs the scope of the route, which is
the scope "before" fib_nh_scope, ie fib_nh_scope - 1.

This patch fixes the problem described in commit 747c1430 ("ip: fix
dflt addr selection for connected nexthop").

Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops")
Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 747c1430.

As explained by Julian, nhc_scope is related to nhc_gw, not to the route.
Revert the original patch. The initial problem is fixed differently in the
next commit.

Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit eb55dc09.

The patch that introduces this bug is reverted right after this one.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

During review of previous change another thing came up - we should
limit the use of validation workarounds to old commands.
Don't list the workarounds one by one, as we're rejecting all existing
ones. We can deal with the masking in the unlikely event that new flag
is added.

Link: https://lore.kernel.org/all/6ba9f727e555fd376623a298d5d305ad408c3d47.camel@sipsolutions.net/
Link: https://lore.kernel.org/r/20221026001524.1892202-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>