commit fe22cd9b upstream.

Currently, pr_debug and pr_devel will not elide function call arguments
appearing in calls to the no_printk for these macros.  This is because
all side effects must be honored before proceeding to the 0-value
assignment in no_printk.

The behavior is contrary to documentation found in the CodingStyle and
the header file where these functions are declared.

This patch corrects that behavior by shunting out the call to no_printk
completely.  The format string is still checked by gcc for correctness,
but no code seems to be emitted in common cases.

[akpm@linux-foundation.org: remove braces, per Joe]
Fixes: 5264f2f7 ("include/linux/printk.h: use and neaten no_printk")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 42eff6a6 upstream.

It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_orig_node_free_ref.

Fixes: 72822225 ("batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 44e8e7e9 upstream.

The batadv_nc_node_free_ref function uses call_rcu to delay the free of the
batadv_nc_node object until no (already started) rcu_read_lock is enabled
anymore. This makes sure that no context is still trying to access the
object which should be removed. But batadv_nc_node also contains a
reference to orig_node which must be removed.

The reference drop of orig_node was done in the call_rcu function
batadv_nc_node_free_rcu but should actually be done in the
batadv_nc_node_release function to avoid nested call_rcus. This is
important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will
not detect the inner call_rcu as relevant for its execution. Otherwise this
barrier will most likely be inserted in the queue before the callback of
the first call_rcu was executed. The caller of rcu_barrier will therefore
continue to run before the inner call_rcu callback finished.

Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 63b39927 upstream.

The batadv_claim_free_ref function uses call_rcu to delay the free of the
batadv_bla_claim object until no (already started) rcu_read_lock is enabled
anymore. This makes sure that no context is still trying to access the
object which should be removed. But batadv_bla_claim also contains a
reference to backbone_gw which must be removed.

The reference drop of backbone_gw was done in the call_rcu function
batadv_claim_free_rcu but should actually be done in the
batadv_claim_release function to avoid nested call_rcus. This is important
because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not
detect the inner call_rcu as relevant for its execution. Otherwise this
barrier will most likely be inserted in the queue before the callback of
the first call_rcu was executed. The caller of rcu_barrier will therefore
continue to run before the inner call_rcu callback finished.

Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 0dc924c5 upstream.

If we return 1 here, then the caller treats it as an error and returns
-EINVAL.  It causes a static checker warning to treat positive returns
as an error.

Fixes: 1aba86d6 ('Btrfs: fix easily get into ENOSPC in mixed case')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit d9812780 upstream.

The SD card specification allows cards to error out a SWITCH command
where the requested function in a group is not supported.  The spec
provides for a set of capabilities which indicate which functions are
supported.

In the case of the power limit, requesting an unsupported power level
via the SWITCH command fails, resulting in the power level remaining at
the power-on default of 0.72W, even though the host and card may support
higher powers levels.

This has been seen with SanDisk 8GB cards, which support the default
0.72W and 1.44W (200mA and 400mA) in combination with an iMX6 host,
supporting up to 2.88W (800mA).  This currently causes us to try to set
a power limit function value of '3' (2.88W) which the card errors out
on, and thereby causes the power level to remain at 0.72W rather than
the desired 1.44W.

Arrange to limit the selected current limit by the capabilities reported
by the card to avoid the SWITCH command failing.  Select the highest
current limit that the host and card combination support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fixes: a39ca6ae ("mmc: core: Simplify and fix for SD switch processing")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 715780ae upstream.

The kerneldoc for request_firmware_nowait() says that it may call the
provided cont() callback with @fw == NULL, if the firmware request
fails. However, this is not the case when called with an empty string
(""). This case is short-circuited by the 'name[0] == '\0'' check
introduced in commit 471b095d ("firmware_class: make sure fw requests
contain a name"), so _request_firmware() never gets to set the fw to
NULL.

Noticed while using the new 'trigger_async_request' testing hook:

    # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request
    [10553.726178] test_firmware: loading ''
    [10553.729859] test_firmware: loaded: 995209091
    # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request
    [10733.676184] test_firmware: loading ''
    [10733.679855] Unable to handle kernel NULL pointer dereference at virtual address 00000004
    [10733.687951] pgd = ec188000
    [10733.690655] [00000004] *pgd=00000000
    [10733.694240] Internal error: Oops: 5 [#1] SMP ARM
    [10733.698847] Modules linked in: btmrvl_sdio btmrvl bluetooth sbs_battery nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables asix usbnet mwifiex_sdio mwifiex cfg80211 jitterentropy_rng drbg joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun
    [10733.725670] CPU: 0 PID: 6600 Comm: bash Not tainted 4.4.0-rc4-00351-g63d0877 #178
    [10733.733137] Hardware name: Rockchip (Device Tree)
    [10733.737831] task: ed24f6c0 ti: ee322000 task.ti: ee322000
    [10733.743222] PC is at do_raw_spin_lock+0x18/0x1a0
    [10733.747831] LR is at _raw_spin_lock+0x18/0x1c
    [10733.752180] pc : [<c00653a0>]    lr : [<c054c204>]    psr: a00d0013
    [10733.752180] sp : ee323df8  ip : ee323e20  fp : ee323e1c
    [10733.763634] r10: 00000051  r9 : b6f18000  r8 : ee323f80
    [10733.768847] r7 : c089cebc  r6 : 00000001  r5 : 00000000  r4 : ec0e6000
    [10733.775360] r3 : dead4ead  r2 : c06bd140  r1 : eef913b4  r0 : 00000000
    [10733.781874] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    [10733.788995] Control: 10c5387d  Table: 2c18806a  DAC: 00000051
    [10733.794728] Process bash (pid: 6600, stack limit = 0xee322218)
    [10733.800549] Stack: (0xee323df8 to 0xee324000)
    [10733.804896] 3de0:                                                       ec0e6000 00000000
    [10733.813059] 3e00: 00000001 c089cebc ee323f80 b6f18000 ee323e2c ee323e20 c054c204 c0065394
    [10733.821221] 3e20: ee323e44 ee323e30 c02fec60 c054c1f8 ec0e7ec0 ec3fcfc0 ee323e5c ee323e48
    [10733.829384] 3e40: c02fed08 c02fec48 c07dbf74 eeb05a00 ee323e8c ee323e60 c0253828 c02fecac
    [10733.837547] 3e60: 00000001 c0116950 ee323eac ee323e78 00000001 ec3fce00 ed2d9700 ed2d970c
    [10733.845710] 3e80: ee323e9c ee323e90 c02e873c c02537d4 ee323eac ee323ea0 c017bd40 c02e8720
    [10733.853873] 3ea0: ee323ee4 ee323eb0 c017b250 c017bd00 00000000 00000000 f3e47a54 ec128b00
    [10733.862035] 3ec0: c017b10c ee323f80 00000001 c000f504 ee322000 00000000 ee323f4c ee323ee8
    [10733.870197] 3ee0: c011b71c c017b118 ee323fb0 c011bc90 becfa8d9 00000001 ec128b00 00000001
    [10733.878359] 3f00: b6f18000 ee323f80 ee323f4c ee323f18 c011bc90 c0063950 ee323f3c ee323f28
    [10733.886522] 3f20: c0063950 c0549138 00000001 ec128b00 00000001 ec128b00 b6f18000 ee323f80
    [10733.894684] 3f40: ee323f7c ee323f50 c011bed8 c011b6ec c0135fb8 c0135f24 ec128b00 ec128b00
    [10733.902847] 3f60: 00000001 b6f18000 c000f504 ee322000 ee323fa4 ee323f80 c011c664 c011be24
    [10733.911009] 3f80: 00000000 00000000 00000001 b6f18000 b6e79be0 00000004 00000000 ee323fa8
    [10733.919172] 3fa0: c000f340 c011c618 00000001 b6f18000 00000001 b6f18000 00000001 00000000
    [10733.927334] 3fc0: 00000001 b6f18000 b6e79be0 00000004 00000001 00000001 8068a3f1 b6e79c84
    [10733.935496] 3fe0: 00000000 becfa7dc b6de194d b6e20246 400d0030 00000001 7a4536e8 49bda390
    [10733.943664] [<c00653a0>] (do_raw_spin_lock) from [<c054c204>] (_raw_spin_lock+0x18/0x1c)
    [10733.951743] [<c054c204>] (_raw_spin_lock) from [<c02fec60>] (fw_free_buf+0x24/0x64)
    [10733.959388] [<c02fec60>] (fw_free_buf) from [<c02fed08>] (release_firmware+0x68/0x74)
    [10733.967207] [<c02fed08>] (release_firmware) from [<c0253828>] (trigger_async_request_store+0x60/0x124)
    [10733.976501] [<c0253828>] (trigger_async_request_store) from [<c02e873c>] (dev_attr_store+0x28/0x34)
    [10733.985533] [<c02e873c>] (dev_attr_store) from [<c017bd40>] (sysfs_kf_write+0x4c/0x58)
    [10733.993437] [<c017bd40>] (sysfs_kf_write) from [<c017b250>] (kernfs_fop_write+0x144/0x1a8)
    [10734.001689] [<c017b250>] (kernfs_fop_write) from [<c011b71c>] (__vfs_write+0x3c/0xe4)

After this patch:

    # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request
    [   32.126322] test_firmware: loading ''
    [   32.129995] test_firmware: failed to async load firmware
    -bash: printf: write error: No such device

Fixes: 471b095d ("firmware_class: make sure fw requests contain a name")
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 6b9140f3 upstream.

Writing 0 length data into test_power makes it access an invalid array
location and kill the system.

Fixes: f17ef9b2 ("power: Make test_power driver more dynamic.")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 61b87cae upstream.

This patch fixes a bug in the filter_events() function.

The patch fixes the bug whereby if some mappings did not
exist, e.g., STALLED_CYCLES_FRONTEND, then any event after it
in the attrs array would disappear from the published list of
events in /sys/devices/cpu/events. This could be verified
easily on any system post SNB (which do not publish
STALLED_CYCLES_FRONTEND):

	$ ./perf stat -e cycles,ref-cycles true
	Performance counter stats for 'true':
              1,217,348      cycles
	<not supported>      ref-cycles

The problem is that in filter_events() there is an assumption
that the argument (attrs) is organized in increasing continuous
event indexes related to the event_map(). But if we remove the
non-supported events by shifing the position in the array, then
the lookup x86_pmu.event_map() needs to compensate for it, otherwise
we are looking up the wrong index. This patch corrects this problem
by compensating for the deleted events and with that ref-cycles
reappears (here shown on Haswell):

	$ perf stat -e ref-cycles,cycles true
	Performance counter stats for 'true':
         4,525,910      ref-cycles
         1,064,920      cycles
       0.002943888 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Fixes: 8300daa2 ("perf/x86: Filter out undefined events from sysfs events attribute")
Link: http://lkml.kernel.org/r/1449516805-6637-1-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit aab24a89 upstream.

menu_is_visible() is a bool function and should use boolean return
values. "no" is a tristate value which happens to also have a value
of 0, but we should nevertheless use the right symbol for it.

This is a very minor cleanup with no semantic change.

Fixes: 86e187ff ("kconfig: add an option to determine a menu's visibility")
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 53653c6b upstream.

In case of an invalid pin value bcm2835_pctl_dt_node_to_map()
would leak the pull configs of already assigned pins.
So avoid this by calling the free map function in error case.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: e1b2dc70 ("pinctrl: add bcm2835 driver")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit dbec6719 upstream.

The commit d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
brings autodetection to the driver. However the autodetection algorithm misses
the TUNER_ONLY bit if it is supplied by the user.

Thus, user gets weird messages and no card registered.

 snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
...
 snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer.
 snd_fm801: probe of 0000:0d:01.0 failed with error -5

Do a copy of TUNER_ONLY bit to be applied after autodetection is done.

Fixes: d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit de64aa9e upstream.

src_ssync_features field is only 1 byte large, and the 4th reserved area
is actually 8 bytes large.

Fixes: d1e1f4e4 ("mtd: nand: add support for reading ONFI parameters from NAND device")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 3a318426 upstream.

We check for overflow here, but we don't check for underflow so it
causes a static checker warning.

Fixes: fb9987d0 ('ath9k_htc: Support for AR9271 chipset.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1382ea63 upstream.

The X-Gene clock driver missed the divider shift operation when
set the divider value.
Signed-off-by: Loc Ho <lho@apm.com>
Fixes: 308964ca ("clk: Add APM X-Gene SoC clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit d282e2b3 upstream.

The initio driver has for many years had two copies of the
same module device table. One of them is also used for registering
the other driver, the other one is entirely useless after the
large scale cleanup that Alan Cox did back in 2007.

The compiler warns about this whenever the driver is built-in:

drivers/scsi/initio.c:131:29: warning: 'i91u_pci_devices' defined but not used [-Wunused-variable]

This removes the extraneous table and the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 72d39fea ("[SCSI] initio: Convert into a real Linux driver and update to modern style")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 2ff56fad upstream.

rc-main mistakenly uses #ifdef MODULE to determine whether it should
load the rc keymap modules.  This symbol is only defined if rc-main
is being built as a module itself, and bears no relation to whether
the rc keymaps are modules.

Fix this to use CONFIG_MODULES instead.

Fixes: 631493ec ("[media] rc-core: merge rc-map.c into rc-main.c")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b1b1e15e upstream.

NFS on a 2 node ocfs2 cluster each node exporting dir.  The lock causing
the hang is the global bit map inode lock.  Node 1 is master, has the
lock granted in PR mode; Node 2 is in the converting list (PR -> EX).
There are no holders of the lock on the master node so it should
downconvert to NL and grant EX to node 2 but that does not happen.
BLOCKED + QUEUED in lock res are set and it is on osb blocked list.
Threads are waiting in __ocfs2_cluster_lock on BLOCKED.  One thread
wants EX, rest want PR.  So it is as though the downconvert thread needs
to be kicked to complete the conv.

The hang is caused by an EX req coming into __ocfs2_cluster_lock on the
heels of a PR req after it sets BUSY (drops l_lock, releasing EX
thread), forcing the incoming EX to wait on BUSY without doing anything.
PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR,
queues ast.

At this time, upconvert (PR ->EX) arrives from node 2, finds conflict
with node 1 lock in PR, so the lock res is put on dlm thread's dirty
listt.

After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till
awoken by ast.

Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in
that order.  dlm_shuffle_lists ques a bast on behalf of node 2 (which
will be run by dlm_thread right after the ast).  ast does its part, sets
UPCONVERT_FINISHING, clears BUSY and wakes its waiters.  Next,
dlm_thread runs bast.  It sets BLOCKED and kicks dc thread.  dc thread
runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing
anything and reques.

Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead
of PR, it wakes up first, finds BLOCKED set and skips doing anything but
clearing UPCONVERT_FINISHING (which was actually "meant" for the PR
thread), and this time waits on BLOCKED.  Next, the PR thread comes out
of wait but since UPCONVERT_FINISHING is not set, it skips updating the
l_ro_holders and goes straight to wait on BLOCKED.  So there, we have a
hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb
blocked list.  Only when dc thread is awoken, it will run
ocfs2_unblock_lock and things will unhang.

One way to fix this is to wake the dc thread on the flag after clearing
UPCONVERT_FINISHING

Orabug: 20933419
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

Conflicts:
	fs/ocfs2/dlmglue.c

commit 26a99c19 upstream.

This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.

It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.

Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.
Reported-by: : Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 09dc9cd6 upstream.

The code produces the following trace:

[1750924.419007] general protection fault: 0000 [#3] SMP
[1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4
dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd
scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc
ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib
mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core
ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core
[1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D
3.13.0-39-generic #66-Ubuntu
[1750924.420364] Hardware name: Dell Computer Corporation PowerEdge
860/0XM089, BIOS A04 07/24/2007
[1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti:
ffff88007af1c000
[1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>]
qib_mcast_qp_free+0x11/0x50 [ib_qib]
[1750924.420364] RSP: 0018:ffff88007af1dd70  EFLAGS: 00010246
[1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX:
000000000000000f
[1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI:
6764697200000000
[1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09:
0000000000000000
[1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12:
ffff88007baa1d98
[1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15:
0000000000000000
[1750924.420364] FS:  00007ffff7fd8740(0000) GS:ffff88007fc80000(0000)
knlGS:0000000000000000
[1750924.420364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4:
00000000000007e0
[1750924.420364] Stack:
[1750924.420364]  ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429
000000007af1de20
[1750924.420364]  ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70
ffffffffa00cb313
[1750924.420364]  00007fffffffde88 0000000000000000 0000000000000008
ffff88003ecab000
[1750924.420364] Call Trace:
[1750924.420364]  [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350
[ib_qib]
[1750924.568035]  [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0
[ib_uverbs]
[1750924.568035]  [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core]
[1750924.568035]  [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170
[ib_uverbs]
[1750924.568035]  [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs]
[1750924.568035]  [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20
[1750924.568035]  [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0
[1750924.568035]  [<ffffffff811bd214>] vfs_write+0xb4/0x1f0
[1750924.568035]  [<ffffffff811bdc49>] SyS_write+0x49/0xa0
[1750924.568035]  [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f
[1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f
84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10
<f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f
[1750924.568035] RIP  [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50
[ib_qib]
[1750924.568035]  RSP <ffff88007af1dd70>
[1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ]

The fix is to note the qib_mcast_qp that was found.   If none is found, then
return EINVAL indicating the error.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit fd7f6727 upstream.

I don't think it makes sense for a module to have a soft dependency
on itself. This seems quite cyclic by nature and I can't see what
purpose it could serve.

OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty
much assumes that some incarnation of the "crc32c" hash algorithm has
been loaded. Therefore it makes sense to have the soft dependency
there (as crc-t10dif does.)

Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ kamal: backport to 3.13-stable: only needs the libcrc32.c addition ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 4f0414e5 upstream.

We need to load the TX SG list in sendmsg(2) after waiting for
incoming data, not before.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
[ kamal: backport to 3.13-stable: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c0bcdbdf upstream.

When a TLV ioctl with numid zero is handled, the driver may spew a
kernel warning with a stack trace at each call.  The check was
intended obviously only for a kernel driver, but not for a user
interaction.  Let's fix it.

This was spotted by syzkaller fuzzer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 9586495d upstream.

This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_seq_port_info32 to a
struct snd_seq_port_info, but the latter is 4 bytes longer than the
32-bit version, so we need to separate kmalloc and copy calls.

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 43c54b8c upstream.

This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_pcm_hw_params32 to
a struct snd_pcm_hw_params, but the latter is 4 bytes longer than
the 32-bit version, so we need to separate kmalloc and copy calls.

This actually leads to an out-of-bounds memory access later on
in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan).

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 2ba1fe7a upstream.

hrtimer_cancel() waits for the completion from the callback, thus it
must not be called inside the callback itself.  This was already a
problem in the past with ALSA hrtimer driver, and the early commit
[fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it.

However, the previous fix is still insufficient: it may still cause a
lockup when the ALSA timer instance reprograms itself in its callback.
Then it invokes the start function even in snd_timer_interrupt() that
is called in hrtimer callback itself, results in a CPU stall.  This is
no hypothetical problem but actually triggered by syzkaller fuzzer.

This patch tries to fix the issue again.  Now we call
hrtimer_try_to_cancel() at both start and stop functions so that it
won't fall into a deadlock, yet giving some chance to cancel the queue
if the functions have been called outside the callback.  The proper
hrtimer_cancel() is called in anyway at closing, so this should be
enough.
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a6a48c56 upstream.

This patch forbids the calling of bind(2) when there are child
sockets created by accept(2) in existence, even if they are created
on the nokey path.

This is needed as those child sockets have references to the tfm
object which bind(2) will destroy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 6a935170 upstream.

This patch allows af_alg_release_parent to be called even for
nokey sockets.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a5596d63 upstream.

This patch adds a way for ahash users to determine whether a key
is required by a crypto_ahash transform.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 37766586 upstream.

This patch adds a compatibility path to support old applications
that do acept(2) before setkey.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a383292c upstream.

When we fail an accept(2) call we will end up freeing the socket
twice, once due to the direct sk_free call and once again through
newsock.

This patch fixes this by removing the sk_free call.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c840ac6a upstream.

Each af_alg parent socket obtained by socket(2) corresponds to a
tfm object once bind(2) has succeeded.  An accept(2) call on that
parent socket creates a context which then uses the tfm object.

Therefore as long as any child sockets created by accept(2) exist
the parent socket must not be modified or freed.

This patch guarantees this by using locks and a reference count
on the parent socket.  Any attempt to modify the parent socket will
fail with EBUSY.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit db8948e6 upstream.

ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass
speaker output pin as other N550 models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ kamal: backport to 3.13-stable: use _1A_CHMAP like N550 ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8d91f8b1 upstream.

@console_may_schedule tracks whether console_sem was acquired through
lock or trylock.  If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched().  This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.

However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines.  Also, only a few drivers call
console_conditional_schedule() to begin with.  This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.

If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.

Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 7625b3a0 upstream.

Commit 08d78658 ("panic: release stale console lock to always get the
logbuf printed out") introduced an unwanted bad unlock balance report when
panic() is called directly and not from OOPS (e.g.  from out_of_memory()).
The difference is that in case of OOPS we disable locks debug in
oops_enter() and on direct panic call nobody does that.

Fixes: 08d78658 ("panic: release stale console lock to always get the logbuf printed out")
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 08d78658 upstream.

In some cases we may end up killing the CPU holding the console lock
while still having valuable data in logbuf. E.g. I'm observing the
following:

- A crash is happening on one CPU and console_unlock() is being called on
  some other.

- console_unlock() tries to print out the buffer before releasing the lock
  and on slow console it takes time.

- in the meanwhile crashing CPU does lots of printk()-s with valuable data
  (which go to the logbuf) and sends IPIs to all other CPUs.

- console_unlock() finishes printing previous chunk and enables interrupts
  before trying to print out the rest, the CPU catches the IPI and never
  releases console lock.

This is not the only possible case: in VT/fb subsystems we have many other
console_lock()/console_unlock() users.  Non-masked interrupts (or
receiving NMI in case of extreme slowness) will have the same result.
Getting the whole console buffer printed out on crash should be top
priority.

[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 6611d8d7 upstream.

A spare array holding mem cgroup threshold events is kept around to make
sure we can always safely deregister an event and have an array to store
the new set of events in.

In the scenario where we're going from 1 to 0 registered events, the
pointer to the primary array containing 1 event is copied to the spare
slot, and then the spare slot is freed because no events are left.
However, it is freed before calling synchronize_rcu(), which means
readers may still be accessing threshold->primary after it is freed.

Fixed by only freeing after synchronize_rcu().
Signed-off-by: Martijn Coenen <maco@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit d96b339f upstream.

I saw the following BUG_ON triggered in a testcase where a process calls
madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that
calls migratepages command repeatedly (doing ping-pong among different
NUMA nodes) for the first process:

   Soft offlining page 0x60000 at 0x700000600000
   __get_any_page: 0x60000 free buddy page
   page:ffffea0001800000 count:0 mapcount:-127 mapping:          (null) index:0x1
   flags: 0x1fffc0000000000()
   page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
   ------------[ cut here ]------------
   kernel BUG at /src/linux-dev/include/linux/mm.h:342!
   invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
   Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi
   CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G           O    4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74
   Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
   task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000
   RIP: 0010:[<ffffffff8118998c>]  [<ffffffff8118998c>] put_page+0x5c/0x60
   RSP: 0018:ffff88007c213e00  EFLAGS: 00010246
   Call Trace:
     put_hwpoison_page+0x4e/0x80
     soft_offline_page+0x501/0x520
     SyS_madvise+0x6bc/0x6f0
     entry_SYSCALL_64_fastpath+0x12/0x6a
   Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47
   RIP  [<ffffffff8118998c>] put_page+0x5c/0x60
    RSP <ffff88007c213e00>

The root cause resides in get_any_page() which retries to get a refcount
of the page to be soft-offlined.  This function calls
put_hwpoison_page(), expecting that the target page is putback to LRU
list.  But it can be also freed to buddy.  So the second check need to
care about such case.

Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b5a663aa upstream.

A slave timer instance might be still accessible in a racy way while
operating the master instance as it lacks of locking.  Since the
master operation is mostly protected with timer->lock, we should cope
with it while changing the slave instance, too.  Also, some linked
lists (active_list and ack_list) of slave instances aren't unlinked
immediately at stopping or closing, and this may lead to unexpected
accesses.

This patch tries to address these issues.  It adds spin lock of
timer->lock (either from master or slave, which is equivalent) in a
few places.  For avoiding a deadlock, we ensure that the global
slave_active_lock is always locked at first before each timer lock.

Also, ack and active_list of slave instances are properly unlinked at
snd_timer_stop() and snd_timer_close().

Last but not least, remove the superfluous call of _snd_timer_stop()
at removing slave links.  This is a noop, and calling it may confuse
readers wrt locking.  Further cleanup will follow in a later patch.

Actually we've got reports of use-after-free by syzkaller fuzzer, and
this hopefully fixes these issues.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit bef5502d upstream.

We have found that migration source will trigger a BUG that the refcount
of mle is already zero before put when the target is down during
migration.  The situation is as follows:

dlm_migrate_lockres
  dlm_add_migration_mle
  dlm_mark_lockres_migrating
  dlm_get_mle_inuse
  <<<<<< Now the refcount of the mle is 2.
  dlm_send_one_lockres and wait for the target to become the
  new master.
  <<<<<< o2hb detect the target down and clean the migration
  mle. Now the refcount is 1.

dlm_migrate_lockres woken, and put the mle twice when found the target
goes down which trigger the BUG with the following message:

  "ERROR: bad mle: ".
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>