- 25 Oct, 2006 39 commits
-
-
Hannes Reinecke authored
This is a cross-port from aic79xx; we still hit the occasional BUG_ON in slave_destroy. And again we don't really need the slave_destroy callback nor the ahc_linux_target structure at all. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Hannes Reinecke authored
aic79xx has a special 'iocell' chip which handles the precompensation. If it's set via DV we should make sure to set the chip correctly, too. Signed-off-by:
-
Hannes Reinecke authored
Whenever an external device is resetted we really have to take care to keep the channel in sync. Just notifying SCSI-ML and retry is not enough as we have to make sure the SCSI bus is not getting confused, either. So whenever we detect an external reset we rewrite the command to TUR, disable packetized command and notify the internal engine that an abort has happened. This way we trigger a proper bus reset sequence and all devices will be renegotiated properly. Kudos to Justin Gibbs and Luben Tuikov for this idea. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: drivers/scsi/lpfc/lpfc_attr.c:597: warning: long long unsigned int format, uint64_t arg (arg 4) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
James Smart <James.Smart@Emulex.Com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Acked-by:
-
Adrian Bunk authored
- make needlessly global code static - #if 0 the following unused global functions: - aic79xx_core.c: ahd_print_scb - aic79xx_core.c: ahd_suspend - aic79xx_core.c: ahd_resume - aic79xx_core.c: ahd_dump_scbs - aic79xx_osm.c: ahd_softc_comp Signed-off-by:
-
Amol Lad authored
Cleanups done to use min/max macros from kernel.h. Handcrafted MIN/MAX macros are changed to use macros in kernel.h [akpm@osdl.org: fix warning] Signed-off-by:
Amol Lad <amol@verismonetworks.com> Signed-off-by:
-
Hannes Reinecke authored
This patch adds support for REPORT TARGET PORT GROUPS. This is used eg for the multipathing priority callout to determine the path priority. With this patch multipath-tools can use the existing mpath_prio_alua callout to exercise the path priority grouping. Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Jes Sorensen authored
Fix typo in check of return value of qla1280_bus_reset() which would result in an adapter reset in addition to the bus reset. Signed-off-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Mike Christie authored
According to the iscsi RFC, we cannot send other requests if we have sent a logout pdu. This patch enforces this requirement by blocking the session and suspending the send thread. Userspace decides if we restart the connection or if we just free everything. Signed-off-by:
-
Mike Christie authored
We have been dropping the pdu. We should just send it to userspace and let it handle it. Signed-off-by:
-
Mike Christie authored
from bhalevy@gmail.com: It looks like change 652 to libiscsi.c added some dead code around line 670 if (rc) { spin_unlock_bh(&conn->session->lock); goto again; } since 5 lines above we goto again if (rc). It looks like the previous if (rc) should go away if we want to put the ctask before breaking out of the while loop with "goto again" (see following patch). Signed-off-by: -
Mike Christie authored
If connection creation fails we end up calling list_del on a invalid struct. This then causes an oops. We are not acutally using the lists (old MCS code we thought might be useful elsewhere) so this patch just removes that code. Signed-off-by:
-
Mike Christie authored
The transport class recv mempools are causing slab corruption. We could hack around netlink's lack of mempool support like dm, but it is just too ulgy (dm's hack is ugly enough :) when you need to support broadcast. This patch removes the recv pools. We have not used them even when we were allocting 20 MB per session and the system only had 64 MBs. And we have no pools on the send side and have been ok there. When Peter's work gets merged we can use that since the network guys are in favor of that approach and are not going to add mempools everywhere. Signed-off-by:
-
Alan Cox authored
Doesn't make the hardware hot pluggable but does ensure the driver won't crash when another device is hot-unplugged at the wrong moment. Soon I propose to deprecate pci_find_device() and some of its friends. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
James Bottomley authored
Debugging TCQ issues has shown me this is a very useful parameter to be able to view. Add it to he host class parameters. Signed-off-by: -
Andrey Mirkin authored
It is known that 2 LSI Logic MegaRAID SATA RAID Controllers (150-4 and 150-6) don't support 64-bit DMA. Unfortunately currently this check is wrong and driver sets 64-bit DMA mode for these devices. Signed-off-by:
Andrey Mirkin <amirkin@sw.ru> Acked-by:
"Ju, Seokmann" <Seokmann.Ju@lsi.com> Signed-off-by:
-
Sergey Kononenko authored
Add PCI id. Plus correct for possibly missing resistor that can cause FLASHEX to have the wrong value. Signed-off-by:
Sergey Kononenko <sergk@sergk.org.ua> Signed-off-by:
-
Santiago Leon authored
The "ibmvscsi: treat busy and error conditions separately" patch submitted by Dave Boutcher back in June incorrectly reenables the CRQ. The broken logic causes the adapter to get disabled if the CRQ connection happens to close temporarily. This patch "fixes that obviously wrong logic check" (Dave's words). Signed-off-by:
Santiago Leon <santil@us.ibm.com> Signed-off-by:
David Boutcher <sleddog@us.ibm.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
- Drop queue-depths across all luns for a given fcport during TASK_SET_FULL statuses. - Ramp-up I/Os after throttling. - Consolidate completion-status handling of CS_QUEUE_FULL with CS_COMPLETE as ISP24xx firmware no longer reports CS_QUEUE_FULL. Signed-off-by:
-
Andrew Vasquez authored
Early ISP2432 parts have a known hardware issue when coming out of a D3 hot state. This issue can result in a hung PCIe link. Recent firmwares contain a workaround whereby the stop-firmware mailbox command prevents the ISP from entering the D3 hot state. In order to ensure that the workaround succeeded the driver must verify that the stop-firmware mailbox command completes successfully. In the event of a failure, the driver attempts a shutdown-retry after resetting the ISP and re-executing firmware. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Swen Schillig authored
Define ZFCP_MAX_SECTORS and initialize scsi_host_template.max_sectors with appropriate value. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Henrik Kretzschmar authored
Changes the obsolete Scsi_Cmnd to struct scsi_cmnd in the Fibre Channel driver (fc4). Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
Henrik Kretzschmar authored
Changes the obsolete typedefd Scsi_Cmnd to struct scsi_cmnd in the ninja scsi pcmcia driver. Signed-off-by:
-
Henrik Kretzschmar authored
Changes the obsolete Scsi_Cmnd to struct scsi_cmnd in psi240i-driver. Signed-off-by:
-
Eric Sesterhenn authored
If we fail to allocate mp->virt during the first while loop iteration, mlist is still uninitialized, therefore we should check if before dereferencing. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Acked-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Henne authored
Fixes a typo in the aic7xxx_old.c. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Michael Reed authored
Thanks to James Smart for the inspiration. Stall error handler if attempting recovery while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Also verify that VirtDevice is available before issuing scsi command. VirtDevice is removed when fc transport removes a target. See James Smart's patch of 08/17/2006 for greater detail. http://marc.theaimsgroup.com/?l=linux-scsi&m=115583213624803&w=2 Also bump version number per Eric's request. Signed-off-by:
Michael Reed <mdr@sgi.com> Acked-by:
Eric Moore <eric.moore@lsil.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Hannes Reinecke authored
According to the adaptec sources aic7xxx / aic79xx really can do 4MB transfers. So we should adjust .max_sectors. Signed-off-by:
-
Doug Maxey authored
There is a dup printk at the tail of qla4xxx_module_init(). Remove the first instance as it's before the complete success of the function. Signed-off-by: -
Guennadi Liakhovetski authored
AM53C974A's Start Transfer Counter register has 24 bits, thus maximum transfer length is 16MiB. But the maximum I can test is 8MiB, so use that until somebody tests 16MiB. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Kai Makisara authored
Based on the original patch from Hannes Reinecke <hare@suse.de> Fix st_open() to return -ENOMEDIUM instead of -EIO if no medium is found. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Henne authored
Change obsolete Scsi_Cmnd to struct scsi_cmnd in the Qlocic FAS408 driver. Signed-off-by:
-
Henne authored
Change the obsolete Scsi_Cmnd to struct scsi_cmnd in the sun3-driver. Signed-off-by:
-
- 11 Oct, 2006 1 commit
-
-
Linus Torvalds authored
This is needed by at least the Mac Mini's, which (incorrectly) come back from suspend with SCI_EN clear. Thanks to Frdric Riss for hunting this down. Acked-by:
Frdric Riss <frederic.riss@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
