Add initial HDK865 dts, based on sm8250-mtp, with a few changes.
Notably, regulator configs are changed a bit.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-9-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add initial HDK855 dts, based on sm8150-mtp, with a few changes.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-8-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device nodes for the USB3 controller, QMP SS PHY and
SNPS HS PHY.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-7-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add dts nodes for the secondary USB controller and related PHY nodes.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-6-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the apps_smmu node for sm8250.

For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-5-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the apps_smmu node for sm8150.

For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200609194030.17756-4-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add LLCC system cache controller entry for sm8150 to support sm8150
for LLCC.
Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
Link: https://lore.kernel.org/r/8f0e818485941076d62a8dc9f711b0fb868ba080.1601452132.git.schowdhu@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

After many years of struggle, commit fa2d0aa9 ("mmc: core: Allow
setting slot index via device tree alias") finally allows the use of
aliases to number SD/MMC slots.  Let's do that for sc7180 SoCs so that
if eMMC and SD are both used they have consistent numbers across boots
and kernel changes.

Picking numbers can be tricky.  Do we call these "1" and "2" to match
the name in documentation or "0" and "1" with the assertion that we
should always start at 0 and count up?

While the "start counting at 0" makes sense if there are not already
well-defined numbers for all sd/mmc controllers, in the case of sc7180
there _are_ well defined numbers.  IMO it is less confusing to use
those and match the docs.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201111073652.1.Ia5bccd9eab7d74ea1ea9a7780e3cdbf662f5a464@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-10-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-9-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-8-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-7-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-6-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-5-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-4-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-3-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-2-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device tree support for Microsoft Lumia 950 XL smartphone.
It is based on the msm8994 chipset and is able to boot Linux
using a custom EDK2 implementation. EL2 core startup is possible
with spin-table, but for now, we'll stick with PSCI.

The board currently supports:
* Screen console via EFIFB
* SDHCI
* I2C
* UART
* PSCI core bringup
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-12-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This is a very basic dwc3 configuration (no PHYs yet),
but it works.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-11-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This is a very basic dwc3 configuration (no PHYs yet),
but it works.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-10-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds touchscreen capabilities to the Lumia 950.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-9-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This will be required to support touchscreen on Lumia
devices.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-8-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add SDHCI2 to enable use of uSD cards on msm8994.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-7-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This will let us use SD cards on our devices.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-6-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add a common compatible and switch to gpio-ranges.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-5-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This will shut down the platform in case the PMIC overheats.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-4-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-3-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add VADC note and some of its channels to allow
for voltage/temperature reading.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-2-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add cooling-cells property and the cooling maps for the gpu tzones
to support GPU cooling.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1604054832-3114-2-git-send-email-akhilpo@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add configs for lazor rev2 and rev3. There are no relevant deltas
between rev1 and rev2, so just add the rev2 compatible string to the
rev1 config.

One important delta in rev3 is a switch of the power supply for the
onboard USB hub from 'pp3300_l7c' to 'pp3300_a' + a load switch. The
actual regulator switch is done by the patch 'arm64: dts: qcom:
sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub',
since it affects the entire trogdor platform. Here we only add the
.dts files for lazor rev3 and replace the generic compatible entries
in the rev1 .dts files.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201106140125.v3.1.I5a75056d573808f40fed22ab7d28ea6be5819f84@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:

arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)

Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The modem firmware memory requirements vary between 32M/140M on
no-lte/lte skus respectively, so fixup the modem memory region
to reflect the requirements.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1602786476-27833-1-git-send-email-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the camera clock controller node supported on SC7180.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1604687907-25712-1-git-send-email-tdas@codeaurora.org
[bjorn: Dropped camcc include]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Set the qcom,adreno-smmu compatible string for the GPU SMMU to enable
split pagetables and per-instance pagetables for drm/msm.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200905200454.240929-21-robdclark@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Set the qcom,adreno-smmu compatible string for the GPU SMMU to enable
split pagetables and per-instance pagetables for drm/msm.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201109184728.2463097-5-jcrouse@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We want userspace to represent the human perceived brightness.
Since the led drivers and the leds themselves don't have a
linear response to the value we give them in terms of perceived
brightness, we'll bake the curve into the dts.

The panel also doesn't have a good response under 5%, so we'll avoid
sending it anything lower than that.

Note: Ideally this patch should be coupled with the driver change from
"backlight: pwm_bl: Fix interpolation", but it can work without it,
without looking too ugly.
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alexandru Stan <amstan@chromium.org>
Link: https://lore.kernel.org/r/20201021220404.v3.2.Ie4d84af5a85e8dcb8f575845518fa39f324a827d@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Populate Venus DT node with interconnect properties.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Link: https://lore.kernel.org/r/20201102113529.16152-1-stanimir.varbanov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable PMIC's RTC device on SM8250-MTP board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201103005432.1181832-2-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable PMIC's RTC device on RB5 board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201103005432.1181832-1-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the soc-specific compatible string so that it can be matched
more specifically now that the driver cares which SoC it's on.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201028172737.v3.2.Ia3b68ac843df93c692627a3a92b947b3a5785863@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>