Pull MMC fixes from Ulf Hansson:

 - Fix support for deferred probing for several host drivers

 - litex_mmc: Use async probe as it's common for all mmc hosts

 - meson-gx: Fix bug when scheduling while atomic

 - mmci_stm32: Fix max busy timeout calculation

 - sdhci-msm: Disable broken 64-bit DMA on MSM8916

* tag 'mmc-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: usdhi60rol0: fix deferred probing
  mmc: sunxi: fix deferred probing
  mmc: sh_mmcif: fix deferred probing
  mmc: sdhci-spear: fix deferred probing
  mmc: sdhci-acpi: fix deferred probing
  mmc: owl: fix deferred probing
  mmc: omap_hsmmc: fix deferred probing
  mmc: omap: fix deferred probing
  mmc: mvsdio: fix deferred probing
  mmc: mtk-sd: fix deferred probing
  mmc: meson-gx: fix deferred probing
  mmc: bcm2835: fix deferred probing
  mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
  mmc: meson-gx: remove redundant mmc_request_done() call from irq context
  mmc: mmci: stm32: fix max busy timeout calculation
  mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916

Merge tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "One small fix for an AMD PMF driver issue which is causing issues for
  users of just released AMD laptop models"

* tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmf: Register notify handler only if SPS is enabled

Pull io_uring fixes from Jens Axboe:
 "A fix for a race condition with poll removal and linked timeouts, and
  then a few followup fixes/tweaks for the msg_control patch from last
  week.

  Not super important, particularly the sparse fixup, as it was broken
  before that recent commit. But let's get it sorted for real for this
  release, rather than just have it broken a bit differently"

* tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux:
  io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
  io_uring/net: disable partial retries for recvmsg with cmsg
  io_uring/net: clear msg_controllen on partial sendmsg retry
  io_uring/poll: serialize poll linked timer start with poll removal

Pull cgroup fixes from Tejun Heo:
 "It's late but here are two bug fixes. Both fix problems which can be
  severe but are very confined in scope. The risk to most use cases
  should be minimal.

   - Fix for an old bug which triggers if a cgroup subsystem is
     remounted to a different hierarchy while someone is reading its
     cgroup.procs/tasks file. The risk is pretty low given how seldom
     cgroup subsystems are moved across hierarchies.

   - We moved cpus_read_lock() outside of cgroup internal locks a while
     ago but forgot to update the legacy_freezer leading to lockdep
     triggers. Fixed"

* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Do not corrupt task iteration when rebinding subsystem
  cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()

Power source notify handler is getting registered even when none of the
PMF feature in enabled leading to a crash.

...
[   22.592162] Call Trace:
[   22.592164]  <TASK>
[   22.592164]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592166]  ? __warn+0x81/0x130
[   22.592171]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592172]  ? report_bug+0x171/0x1a0
[   22.592175]  ? prb_read_valid+0x1b/0x30
[   22.592177]  ? handle_bug+0x3c/0x80
[   22.592178]  ? exc_invalid_op+0x17/0x70
[   22.592179]  ? asm_exc_invalid_op+0x1a/0x20
[   22.592182]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592183]  ? acpi_ut_delete_object_desc+0x86/0xb0
[   22.592186]  ? acpi_ut_update_ref_count.part.0+0x22d/0x930
[   22.592187]  __schedule+0xc0/0x1410
[   22.592189]  ? ktime_get+0x3c/0xa0
[   22.592191]  ? lapic_next_event+0x1d/0x30
[   22.592193]  ? hrtimer_start_range_ns+0x25b/0x350
[   22.592196]  schedule+0x5e/0xd0
[   22.592197]  schedule_hrtimeout_range_clock+0xbe/0x140
[   22.592199]  ? __pfx_hrtimer_wakeup+0x10/0x10
[   22.592200]  usleep_range_state+0x64/0x90
[   22.592203]  amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592207]  amd_pmf_update_slider+0x56/0x1b0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592210]  amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592213]  amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592216]  notifier_call_chain+0x5a/0xd0
[   22.592218]  atomic_notifier_call_chain+0x32/0x50
...

Fix this by moving the registration of source change notify handler only
when SPS(Static Slider) is advertised as supported.
Reported-by: Allen Zhong <allen@atr.me>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Pull timer fix from Thomas Gleixner:
 "A single regression fix for a regression fix:

  For a long time the tick was aligned to clock MONOTONIC so that the
  tick event happened at a multiple of nanoseconds per tick starting
  from clock MONOTONIC = 0.

  At some point this changed as the refined jiffies clocksource which is
  used during boot before the TSC or other clocksources becomes usable,
  was adjusted with a boot offset, so that time 0 is closer to the point
  where the kernel starts.

  This broke the assumption in the tick code that when the tick setup
  happens early on ktime_get() will return a multiple of nanoseconds per
  tick. As a consequence applications which aligned their periodic
  execution so that it does not collide with the tick were not longer
  guaranteed that the tick period starts from time 0.

  The fix for this regression was to realign the tick when it is
  initially set up to a multiple of tick periods. That works as long as
  the underlying tick device supports periodic mode, but breaks under
  certain conditions when the tick device supports only one shot mode.

  Depending on the offset, the alignment delta to clock MONOTONIC can
  get in a range where the minimal programming delta of the underlying
  clock event device is larger than the calculated delta to the next
  tick. This results in a boot hang as the tick code tries to play catch
  up, but as the tick never fires jiffies are not advanced so it keeps
  trying for ever.

  Solve this by moving the tick alignement into the NOHZ / HIGHRES
  enablement code because at that point it is guaranteed that the
  underlying clocksource is high resolution capable and not longer
  depending on the tick.

  This is far before user space starts, so at the point where
  applications try to align their timers, the old behaviour of the tick
  happening at a multiple of nanoseconds per tick starting from clock
  MONOTONIC = 0 is restored"

* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/common: Align tick period during sched_timer setup

Pull virtio fix from Michael Tsirkin:
 "A last minute revert to fix a regression"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  Revert "virtio-blk: support completion batching for the IRQ path"

This reverts commit e7b813b3 (and the
subsequent fix for it: 41a15855 "efi: random: fix NULL-deref when
refreshing seed").

It turns otu to cause non-deterministic boot stalls on at least a HP
6730b laptop.
Reported-and-bisected-by: Sami Korkalainen <sami.korkalainen@proton.me>
Link: https://lore.kernel.org/all/GQUnKz2al3yke5mB2i1kp3SzNHjK8vi6KJEh7rnLrOQ24OrlljeCyeWveLW9pICEmB9Qc8PKdNt3w1t_g3-Uvxq1l8Wj67PpoMeWDoH8PKk=@proton.me/
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One last fix for SPI, just a simple fix for incorrect handling of
  probe deferral for DMA in the Qualcomm GENI driver"

* tag 'spi-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()

Merge tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple fix for v6.4, some incorrectly specified bitfield masks in
  the PCA9450 driver"

* tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK

Pull regmap fix from Mark Brown:
 "One more fix for v6.4

  The earlier fix to take account of the register data size when
  limiting raw register writes exposed the fact that the Intel AVMM bus
  was incorrectly specifying too low a limit on the maximum data
  transfer, it is only capable of transmitting one register so had set a
  transfer size limit that couldn't fit both the value and the the
  register address into a single message"

* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: spi-avmm: Fix regmap_bus max_raw_write

Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e441 ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.

Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.

Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.

Cc: stable@vger.kernel.org # 5.10+
Fixes: cac9e441 ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 07b679f7.

This change appears to have broken things...
We now see applications hanging during disk accesses.
e.g.
multi-port virtio-blk device running in h/w (FPGA)
Host running a simple 'fio' test.
[global]
thread=1
direct=1
ioengine=libaio
norandommap=1
group_reporting=1
bs=4K
rw=read
iodepth=128
runtime=1
numjobs=4
time_based
[job0]
filename=/dev/vda
[job1]
filename=/dev/vdb
[job2]
filename=/dev/vdc
...
[job15]
filename=/dev/vdp

i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads
This is repeatedly run in a loop.

After a few, normally <10 seconds, fio hangs.
With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging.
Last message:
fio-3.19
Starting 8 threads
Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s]
I think this means at the end of the run 1 queue was left incomplete.

'diskstats' (run while fio is hung) shows no outstanding transactions.
e.g.
$ cat /proc/diskstats
...
252       0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0
252      16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0
...

Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called.
e.g.
PF= 0                         vq=0           1           2           3
[a]request_count     -   839416590   813148916   105586179    84988123
[b]completion1_count -   839416590   813148916   105586179    84988123
[c]completion2_count -           0           0           0           0

PF= 1                         vq=0           1           2           3
[a]request_count     -   823335887   812516140   104582672    75856549
[b]completion1_count -   823335887   812516140   104582672    75856549
[c]completion2_count -           0           0           0           0

i.e. the issue is after the virtio-blk driver.

This change was introduced in kernel 6.3.0.
I am seeing this using 6.3.3.
If I run with an earlier kernel (5.15), it does not occur.
If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail.
e.g.
kernel 5.15 - this is OK
virtio_blk.c,virtblk_done() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          blk_mq_complete_request(req);
                 }

kernel 6.3.3 - this fails
virtio_blk.c,virtblk_handle_req() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          if (!blk_mq_complete_request_remote(req)) {
                                  if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
                                           virtblk_request_done(req);    //this never gets called... so blk_mq_add_to_batch() must always succeed
                                   }
                          }
                 }

If I do, kernel 6.3.3 - this is OK
virtio_blk.c,virtblk_handle_req() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          if (!blk_mq_complete_request_remote(req)) {
                                   virtblk_request_done(req); //force this here...
                                  if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
                                           virtblk_request_done(req);    //this never gets called... so blk_mq_add_to_batch() must always succeed
                                   }
                          }
                 }

Perhaps you might like to fix/test/revert this change...
Martin
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/
Cc: Suwan Kim <suwan.kim027@gmail.com>
Tested-by: edliaw@google.com
Reported-by: "Roberts, Martin" <martin.roberts@intel.com>
Message-Id: <336455b4f630f329380a8f53ee8cad3868764d5c.1686295549.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "19 hotfixes.  8 of these are cc:stable.

  This includes a wholesale reversion of the post-6.4 series 'make slab
  shrink lockless'. After input from Dave Chinner it has been decided
  that we should go a different way [1]"

Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]

* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  selftests/mm: fix cross compilation with LLVM
  mailmap: add entries for Ben Dooks
  nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
  Revert "mm: vmscan: make global slab shrink lockless"
  Revert "mm: vmscan: make memcg slab shrink lockless"
  Revert "mm: vmscan: add shrinker_srcu_generation"
  Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
  Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
  Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
  Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
  nilfs2: fix buffer corruption due to concurrent device reads
  scripts/gdb: fix SB_* constants parsing
  scripts: fix the gfp flags header path in gfp-translate
  udmabuf: revert 'Add support for mapping hugepages (v4)'
  mm/khugepaged: fix iteration in collapse_file
  memfd: check for non-NULL file_seals in memfd_create() syscall
  mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
  mm/mprotect: fix do_mprotect_pkey() limit check
  writeback: fix dereferencing NULL mapping->host on writeback_page_template

Pull ACPI fix from Rafael Wysocki:
 "Fix a kernel crash during early resume from ACPI S3 that has been
  present since the 5.15 cycle when might_sleep() was added to
  down_timeout(), which in some configurations of the kernel caused an
  implicit preemption point to trigger at a wrong time"

* tag 'acpi-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()

Pull thermal control fix from Rafael Wysocki:
 "Fix a regression introduced during the 6.3 cycle causing
  intel_soc_dts_iosf to report incorrect temperature values
  due to a coding mistake (Hans de Goede)"

* tag 'thermal-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures

Pull tracing fixes from Steven Rostedt:

 - Fix MAINTAINERS file to point to proper mailing list for rtla and rv

   The mailing list pointed to linux-trace-devel instead of
   linux-trace-kernel. The former is for the tracing libraries and the
   latter is for anything in the Linux kernel tree. The wrong mailing
   list was used because linux-trace-kernel did not exist when rtla and
   rv were created.

 - User events:

    - Fix matching of dynamic events to their user events

      When user writes to dynamic_events file, a lookup of the
      registered dynamic events is made, but there were some cases that
      a match could be incorrectly made.

    - Add auto cleanup of user events

      Have the user events automatically get removed when the last
      reference (file descriptor) is closed. This was asked for to
      prevent leaks of user events hanging around needing admins to
      clean them up.

    - Add persistent logic (but not let user space use it yet)

      In some cases, having a persistent user event (one that does not
      get cleaned up automatically) is useful. But there's still debates
      about how to expose this to user space. The infrastructure is
      added, but the API is not.

    - Update the selftests

      Update the user event selftests to reflect the above changes"

* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/user_events: Document auto-cleanup and remove dyn_event refs
  selftests/user_events: Adapt dyn_test to non-persist events
  selftests/user_events: Ensure auto cleanup works as expected
  tracing/user_events: Add auto cleanup and future persist flag
  tracing/user_events: Track refcount consistently via put/get
  tracing/user_events: Store register flags on events
  tracing/user_events: Remove user_ns walk for groups
  selftests/user_events: Add perf self-test for empty arguments events
  selftests/user_events: Clear the events after perf self-test
  selftests/user_events: Add ftrace self-test for empty arguments events
  tracing/user_events: Fix the incorrect trace record for empty arguments events
  tracing: Modify print_fields() for fields output order
  tracing/user_events: Handle matching arguments that is null from dyn_events
  tracing/user_events: Prevent same name but different args event
  tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list

Pull btrfs fix from David Sterba:
 "One more regression fix for an assertion failure that uncovered a
  nasty problem with stripe calculations. This is caused by a u32
  overflow when there are enough devices. The fstests require 6 so this
  hasn't been caught, I was able to hit it with 8.

  The fix is minimal and only adds u64 casts, we'll clean that up later.
  I did various additional tests to be sure"

* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix u32 overflows when left shifting stripe_nr

The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
	.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT

SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:

commit 39815141 ("regmap: Account for register length when chunking")

Change max_raw_write to include space (4 additional bytes) for both the
register address and value:

	.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT

Fixes: 7f9fb673 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull smb server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix potential oops in parsing compounded requests

   - fix various paths (mkdir, create etc) where mnt_want_write was not
     checked first

   - fix slab out of bounds in check_message and write"

* tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: validate session id and tree id in the compound request
  ksmbd: fix out-of-bound read in smb2_write
  ksmbd: add mnt_want_write to ksmbd vfs functions
  ksmbd: validate command payload size

[BUG]
David reported an ASSERT() get triggered during fio load on 8 devices
with data/raid6 and metadata/raid1c3:

  fio --rw=randrw --randrepeat=1 --size=3000m \
	  --bsrange=512b-64k --bs_unaligned \
	  --ioengine=libaio --fsync=1024 \
	  --name=job0 --name=job1 \

The ASSERT() is from rbio_add_bio() of raid56.c:

	ASSERT(orig_logical >= full_stripe_start &&
	       orig_logical + orig_len <= full_stripe_start +
	       rbio->nr_data * BTRFS_STRIPE_LEN);

Which is checking if the target rbio is crossing the full stripe
boundary.

  [100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622
  [100.795] ------------[ cut here ]------------
  [100.796] kernel BUG at fs/btrfs/raid56.c:1622!
  [100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  [100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124
  [100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
  [100.802] Workqueue: writeback wb_workfn (flush-btrfs-1)
  [100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs]
  [100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246
  [100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01
  [100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001
  [100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f
  [100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400
  [100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000
  [100.817] FS:  0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
  [100.821] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0
  [100.824] Call Trace:
  [100.825]  <TASK>
  [100.825]  ? die+0x32/0x80
  [100.826]  ? do_trap+0x12d/0x160
  [100.827]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.827]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.829]  ? do_error_trap+0x90/0x130
  [100.830]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.831]  ? handle_invalid_op+0x2c/0x30
  [100.833]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.835]  ? exc_invalid_op+0x29/0x40
  [100.836]  ? asm_exc_invalid_op+0x16/0x20
  [100.837]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.837]  raid56_parity_write+0x64/0x270 [btrfs]
  [100.838]  btrfs_submit_chunk+0x26e/0x800 [btrfs]
  [100.840]  ? btrfs_bio_init+0x80/0x80 [btrfs]
  [100.841]  ? release_pages+0x503/0x6d0
  [100.842]  ? folio_unlock+0x2f/0x60
  [100.844]  ? __folio_put+0x60/0x60
  [100.845]  ? btrfs_do_readpage+0xae0/0xae0 [btrfs]
  [100.847]  btrfs_submit_bio+0x21/0x60 [btrfs]
  [100.847]  submit_one_bio+0x6a/0xb0 [btrfs]
  [100.849]  extent_write_cache_pages+0x395/0x680 [btrfs]
  [100.850]  ? __extent_writepage+0x520/0x520 [btrfs]
  [100.851]  ? mark_usage+0x190/0x190
  [100.852]  extent_writepages+0xdb/0x130 [btrfs]
  [100.853]  ? extent_write_locked_range+0x480/0x480 [btrfs]
  [100.854]  ? mark_usage+0x190/0x190
  [100.854]  ? attach_extent_buffer_page+0x220/0x220 [btrfs]
  [100.855]  ? reacquire_held_locks+0x178/0x280
  [100.856]  ? writeback_sb_inodes+0x245/0x7f0
  [100.857]  do_writepages+0x102/0x2e0
  [100.858]  ? page_writeback_cpu_online+0x10/0x10
  [100.859]  ? __lock_release.isra.0+0x14a/0x4d0
  [100.860]  ? reacquire_held_locks+0x280/0x280
  [100.861]  ? __lock_acquired+0x1e9/0x3d0
  [100.862]  ? do_raw_spin_lock+0x1b0/0x1b0
  [100.863]  __writeback_single_inode+0x94/0x450
  [100.864]  writeback_sb_inodes+0x372/0x7f0
  [100.864]  ? lock_sync+0xd0/0xd0
  [100.865]  ? do_raw_spin_unlock+0x93/0xf0
  [100.866]  ? sync_inode_metadata+0xc0/0xc0
  [100.867]  ? rwsem_optimistic_spin+0x340/0x340
  [100.868]  __writeback_inodes_wb+0x70/0x130
  [100.869]  wb_writeback+0x2d1/0x530
  [100.869]  ? __writeback_inodes_wb+0x130/0x130
  [100.870]  ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0
  [100.870]  wb_do_writeback+0x3eb/0x480
  [100.871]  ? wb_writeback+0x530/0x530
  [100.871]  ? mark_lock_irq+0xcd0/0xcd0
  [100.872]  wb_workfn+0xe0/0x3f0<

[CAUSE]
Commit a97699d1 ("btrfs: replace map_lookup->stripe_len by
BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce
u64 division.

Function btrfs_max_io_len() is to get the length to the stripe boundary.

It calculates the full stripe start offset (inside the chunk) by the
following code:

		*full_stripe_start =
			rounddown(*stripe_nr, nr_data_stripes(map)) <<
			BTRFS_STRIPE_LEN_SHIFT;

The calculation itself is fine, but the value returned by rounddown() is
dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which
returned int).

Thus the result is also u32, then we do the left shift, which can
overflow u32.

If such overflow happens, @full_stripe_start will be a value way smaller
than @offset, causing later "full_stripe_len - (offset -
*full_stripe_start)" to underflow, thus make later length calculation to
have no stripe boundary limit, resulting a write bio to exceed stripe
boundary.

There are some other locations like this, with a u32 @stripe_nr got left
shift, which can lead to a similar overflow.

[FIX]
Fix all @stripe_nr with left shift with a type cast to u64 before the
left shift.

Those involved @stripe_nr or similar variables are recording the stripe
number inside the chunk, which is small enough to be contained by u32,
but their offset inside the chunk can not fit into u32.

Thus for those specific left shifts, a type cast to u64 is necessary so
this patch does not touch them and the code will be cleaned up in the
future to keep the fix minimal.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: a97699d1 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN")
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Fix races in Hyper-V PCI controller (Dexuan Cui)

 - Fix handling of hyperv_pcpu_input_arg (Michael Kelley)

 - Fix vmbus_wait_for_unload to scan present CPUs (Michael Kelley)

 - Call hv_synic_free in the failure path of hv_synic_alloc (Dexuan Cui)

 - Add noop for real mode handlers for virtual trust level code (Saurabh
   Sengar)

* tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  PCI: hv: Add a per-bus mutex state_lock
  Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
  PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
  PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
  PCI: hv: Fix a race condition bug in hv_pci_query_relations()
  arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing
  x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline
  Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
  Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
  x86/hyperv/vtl: Add noop for realmode pointers

Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.

When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture.  Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.

Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I am going to be losing my sifive.com address soon and I also realised my
old Simtec address (from >10 years ago) is also not been updates so update
.mailmap for both.

Link: https://lkml.kernel.org/r/20230615081820.79485-1-ben.dooks@codethink.co.ukSigned-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.

In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others).  It is necessary to check this
after locking the page/folio.

So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.

Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000da4f6b05eb9bf593@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit f95bdb70.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-8-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit caa05325.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-7-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 475733dd.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So revert the
shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-6-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 20cd1892.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So revert the
shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-5-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit b3cabea3.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be careful
to not frequently check for SRCU read-side critical section exits. Therefore,
even if no one is currently in the SRCU read-side critical section,
synchronize_srcu() cannot return quickly. That's why unregister_shrinker()
has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner
to continue to re-implement the lockless slab shrink. Because there will
be other readers after reverting the shrinker_srcu related changes, so
it is better to restore to hold read lock to reparent shrinker nr_deferred.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-4-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 1643db98.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So we still need
shrinker_rwsem in synchronize_shrinkers() after reverting the
shrinker_srcu related changes.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-3-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "revert shrinker_srcu related changes".


This patch (of 7):

This reverts commit cf2e309e.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_mutex back to shrinker_rwsem first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.

Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.

In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write.  This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.

Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.

When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others.  As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.

Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB.  In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying.  So fix these potential
issues as well.

Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

--0000000000009a0c9905fd9173ad
Content-Transfer-Encoding: 8bit

After f15afbd3 ("fs: fix undefined behavior in bit shift for
SB_NOUSER") the constants were changed from plain integers which
LX_VALUE() can parse to constants using the BIT() macro which causes the
following:

Reading symbols from build/linux-custom/vmlinux...done.
Traceback (most recent call last):
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
    import linux.constants
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5
    LX_SB_RDONLY = ((((1UL))) << (0))

Use LX_GDBPARSED() which does not suffer from that issue.

f15afbd3 ("fs: fix undefined behavior in bit shift for SB_NOUSER")
Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.comSigned-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since gfp flags have been shifted to gfp_types.h so update the path in
the gfp-translate script.

Link: https://lkml.kernel.org/r/20230608154450.21758-1-prathubaronia2011@gmail.com
Fixes: cb5a065b ("headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>")
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This effectively reverts commit 16c243e9 ("udmabuf: Add support for
mapping hugepages (v4)").  Recently, Junxiao Chang found a BUG with page
map counting as described here [1].  This issue pointed out that the
udmabuf driver was making direct use of subpages of hugetlb pages.  This
is not a good idea, and no other mm code attempts such use.  In addition
to the mapcount issue, this also causes issues with hugetlb vmemmap
optimization and page poisoning.

For now, remove hugetlb support.

If udmabuf wants to be used on hugetlb mappings, it should be changed to
only use complete hugetlb pages.  This will require different alignment
and size requirements on the UDMABUF_CREATE API.

[1] https://lore.kernel.org/linux-mm/20230512072036.1027784-1-junxiao.chang@intel.com/

Link: https://lkml.kernel.org/r/20230608204927.88711-1-mike.kravetz@oracle.com
Fixes: 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Junxiao Chang <junxiao.chang@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove an unnecessary call to xas_set(index) when iterating over the
target range in collapse_file.  The extra call to xas_set reset the xas
cursor to the top of the tree, causing the xas_next call on the next
iteration to walk the tree to index instead of advancing to index+1.  This
returned the same page again, which would cause collapse_file to fail
because the page is already locked.

This bug was hidden when CONFIG_DEBUG_VM was set.  When that config was
used, the xas_load in a subsequent VM_BUG_ON assert would walk xas from
the top of the tree to index, causing the xas_next call on the next loop
iteration to advance the cursor as expected.

Link: https://lkml.kernel.org/r/20230607053135.2087354-1-stevensd@google.com
Fixes: a2e17cc2 ("mm/khugepaged: maintain page cache uptodate flag")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Ensure that file_seals is non-NULL before using it in the memfd_create()
syscall.  One situation in which memfd_file_seals_ptr() could return a
NULL pointer when CONFIG_SHMEM=n, oopsing the kernel.

Link: https://lkml.kernel.org/r/20230607132427.2867435-1-roberto.sassu@huaweicloud.com
Fixes: 47b9012e ("shmem: add sealing support to hugetlb-backed memfd")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>