From: Jakub Bogusz <qboosh@pld-linux.org>

This patch removes using of floating point operations in tdfxfb - they
are really not needed here (these consts are used only in substitutions
and comparisons with integers) are cause unresolved symbols on some
archs - e.g. on alpha:

*** Warning: "__ltdf2" [drivers/video/tdfxfb.ko] undefined!
*** Warning: "__adddf3" [drivers/video/tdfxfb.ko] undefined!
*** Warning: "__floatsidf" [drivers/video/tdfxfb.ko] undefined!

From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>

The callout code has been removed long ago from 2.6.  I believe it is safe
to remove some of its unused defines.

From: Herbert Xu <herbert@gondor.apana.org.au>

RADEON is selecting I2C_ALGOBIT but as kconfig currently does not propagate
selects up the dependency chain (that is according to Roman), this can
leave I2C as m while I2C_ALGOBIT is y.

early printk documentation fix

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Don't remove attributes, they should be gone automatically.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Refactor fw_setup_class_device for readability and maintainability.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

- Remove races related to the handling and release of 'struct firmware'

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- release 'struct firmware_priv' from class_dev->release.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Make an status bitmap instead of using independent boolean variables.  It
  will make things nicer later when new issues need to be tracked.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Take advantage of strlcpy.

- Extra error logging.

- Use struct coping instead of memcpy.

- Put all aborting code in a single place, and fully abort if
  fw_realloc_buffer fails.

- Abort on unexpected 'loading' values.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- use vfree to free vmalloc memory.

- Make sure fw_setup_class_device sets *class_dev_p to NULL in all case of
  error.

- Fix error handling in firmware_class_init.

From: Geert Uytterhoeven <geert@linux-m68k.org>

Update Macintosh driver config logic:
  - Move remaining Mac/m68k-specific logic from arch/m68k/Kconfig to
    drivers/macintosh/Kconfig
  - Fixup Mac/m68k conflicts

From: James Simmons <jsimmons@infradead.org>

Remove kd.h.  We don't need this header.  Use the inline functions to set
the current process state.

From: Michael Hunold <hunold@linuxtv.org>

- dvb-ttusb-budget: Fixed i2c code to detect nearly all errors

- dvb-ttusb-budget: Added "V 2.1" to prevent warning message on driver load

- dvb-ttusb-budget: Some printks turned into dprintks

- dvb-ttusb-budget: Removed __initdata.  It is now possible in kernel 2.6
  to compile the DVB drivers into a monolithic kernel.

- dvb-ttusb-budget: Fix for failing urb submission under 2.6 kernels

From: Michael Hunold <hunold@linuxtv.org>

- av7110: check result of saa7146_wait_for_debi_done() in av7110_bootarm()
  and bail out early if booting the ARM failed

- av7110: correct voffset for analog standard

- av7110: replace usage of sleep_on_interruptible_timeout() with
  wait_event_interruptible_timeout()

From: Michael Hunold <hunold@linuxtv.org>

- tda1004x: standardised where the firmware should be.

- tda1004x: need to re-invert inversion for tda10046 in get_fe()

- tda1004x: reset chip before uploading firmware

- tda1004x: split firmware upload off from frontend init.  the initial tune
  attempt was taking too long.  provide explanation of tuner frequency
  calculations

- tda1004x: Fixed signal strength reading for tda10046h

From: Michael Hunold <hunold@linuxtv.org>

stv0299: Added seperate settings for SU1278 on Technotrend hardware

From: Michael Hunold <hunold@linuxtv.org>

- alps_tdlb7 + alps_tdmb7: Changed to use full i2c reads in probing instead
  of i2c pings to be compatable with ttusb

- nxt6000: bugfix by Robert Cook: FE_RESET did the same as FE_INIT, thus
  invalidating current channel settings on FE_RESET

- sp887x: fixed typo

- Makefile: add nxt6000 frontend driver to Makefiles

- Kconfig: DVB_TDA1004X and DVB_NXT6000 do not depend on !STANDALONE (i.e.
  no compile-time firmware image necessary)

- ves1820: turn off ves1820 test output pins

- ves1820: verbose-print AFC only if carrier has been recovered

- ves1820: change AFC handling as suggested by Robert Schlabbach, use bit 1
  of the SYNC register for FE_HAS_SIGNAL

From: Michael Hunold <hunold@linuxtv.org>

- dvb-core: replace usage of sleep_on_...() with
  wait_event_interruptible_timeout()

- dvb-core: fix dvb_ringbuffer_read/write() buffer pointer bug

- video: added VIDEO_EVENT_FRAME_RATE_CHANGED and VIDEO_GET_FRAME_RATE
  ioctl

From: Michael Hunold <hunold@linuxtv.org>

skystar2: renamed two functions, deleted spurious spaces.

From: Michael Hunold <hunold@linuxtv.org>

- saa7146: fix timeout bug on AMD64 in saa7146_wait_for_debi_done()

- saa7146: release resources for video overlay properly, don't
  (incorrectly) rely on VIDIOC_OVERLAY(0)

From: Michael Hunold <hunold@linuxtv.org>

- dvb docs: added a nice howto on how to get Avermedia DVB-T running - nice
  tutorial for DVB newbie, too

- dvb docs: fix various incorrect informations in cards.txt, faq.txt,
  firmware.txt

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add z/VM discontiguos saved segments (DCSS) block device driver.

From: Arnd Bergmann <arnd@arndb.de>

With the s390 updates in -mm3, you also need this patchlet.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add new features to the zfcp host adapater driver:
  - Add support for FCP access control.
  - Error recovery enhancements.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add channel measurement block interface.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add collaborative memory management interface.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add Linux - z/VM monitor stream.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add virtual timer interface.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

DASD driver fixes:
 - Fix generic_set_online if diag discipline is not availab.e
 - Fix reserve on already reserved device.
 - Use default-erp for unit check without sence information.
 - Revert dasd naming scheme change from dasd<xyz> to dasd_<busid>_. This
   breaks too many user space packages.
 - Extend dasd naming scheme to four letters dasd<aaaa>-dasd<zzzz>.
 - Fix formatting of dasds.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

IUCV interface fixes:
 - VM workaround: redirect setmask call to cpu 0.
 - Disable message interrupts during connection setup.
 - Honor incoming connection severed during connection setup.
 - Add connect retry when remote severed connection.
 - Add symlinks between net device and iucv device.
 - More fixes for proper net device allocation/deallocation.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

LCS network driver fixes:
 - Fix ccwgroup behaviour, remove should offline cards still online.
 - Better not write to the debug feature before it is registers.
 - Don't free card structure on offline but on remove.
 - Check for deferred condition code 1 in lcs_irq for halt requests.
 - Call free_netdev only if there is a net device.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

CTC network driver fixes:
 - Fixed some debug messages (did not compile with DEBUG defined).
 - Added sanity checks in ctc_proto_store() & ctc_shutdown_device().
 - Added some bugfixes from 2.4.
 - Tweaked logging.
 - Removed syntax error in pr_debug call.
 - Changed do_IO (not existing any more) to ccw_device in messages.
 - Corrected format failure in pr_debug of channel_get.
 - Add symlinks between net device and ctc device.
 - Add tiocmset/tiocmget API change patch from Russell King
 - Fix locking problem in ctc_tty_cleanup.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

sys_timer_settime returns EINVAL if *new is NULL, compat_timer_settime
returns EFAULT.  Add a check to compat_timer_settime to return EINVAL
if *new is NULL.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Console driver fixes:
 - Fix ^n at end-of-line check in 3215 and sclp driver.
 - Fix copy_from_user/might_sleep/spinlock problem in sclp.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Common i/o layer fixes:
 - Add atomic onoff variable to ccw devices and ccw-group devices to
   avoid races during online/offline.
 - Fix pr_debug calls.
 - A lot of path fixes:
   + Set device to disconnected state after no path event.
   + Fix chpid vary on/off for single path devices.
   + Make logical vary on/off consistent with physical vary on/off.
   + Don't update subchannel schib if the device is gone (dnv not set).
   + Add code to recover lost chpids after machine checks.
   + Avoid processing link incidents, resource accessability events and
     chpid machine checks for logically offline chpids.
   + Recover disconnected devices after chsc machine checks.
   + Delay de-registering of no path devices to avoid deadlocks.
   + Don't redo ssd for known subchannels - the info is static.
   + Introduce a second, "slow" machine check handler thread for new devices.
     The "fast" machine check handler only recovers disconnected devices.
 - Deregister subchannel rather than ccw device on not oper events.
 - Fix calling sequence of notify function vs. path verification.
 - Reset timeout for disconnected devices.
 - Fix problem with debug feature and %s arguments.
 - Fix __get_subchannel_by_stsch to deal with "zombie" subchannels.
 - Avoid "zombie" subchannels if device is not operational during sense id.
 - Handle call to the io_subchannel remove function if the ccw device
   is not registered yet.
 - Add availability attribute for ccw devices: "good", "no device",
   "no path", "boxed".
 - Export ccw_device_work for qdio as module.
 - Retry sense id for tape devices which present intervention required.
 - Don't check the activity control to decide if the device driver interrupt
   handler needs to be called but use the bits in status control.
 - Fix race in ccw_device_stlck.
 - Accumulate deferred condition code.
 - Fix setting_up_sema locking.
 - Call qdio_shutdown instead of qdio_cleanup on failed establish.
 - Fix problem when 64 FCP adapters are initialized simultaneously.
 - Fix problem with >64 adapter interrupt capable devices.
 - Reduce stack usage in qdio.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Core s/390 changes:
 - Add -mbackchain to CFLAGS to prepare for gcc 3.4 with comes with a
   default setting of -mno-backchain
 - Add implementation of strcpy.
 - Pad bytes after string end in strncpy.
 - Fix __sem_update_count inline assembly for gcc 3.4.
 - Export smp_ptlb_all for tlb flushing in module code.
 - Fix sched_clock.
 - Remove the last KERNEL_VERSION #if in s390 code.
 - Add dummy implementation for missing dma_{alloc,free}_coherent.
 - Avoid cast of lvalue in idal_buffer_{from,to}_user.
 - Remove _exit definition from unistd.h.

From: Christoph Hellwig <hch@lst.de>

Take a reference before calling into the module and release it after we're
done.  Also remove the useless (and wrong) refcounting in videocodec -
symbols from this module are used by other modules if we call into those
functions so it can't be unloaded anyway.

We really need to add a debug check to tip all those
try_module_get(THIS_MODULE) callers..

From: <fabian.frederick@gmx.fr>

- Avoid sync_fs with clean fs & wait mode = 0

- mark_files_ro overrides pending deletes (doc)

- some trivial doc fixes

From: Roman Zippel <zippel@linux-m68k.org>

This driver adds full read/write support for HFS+ and is based on the
readonly driver by Brad Broyer.

Thanks to Ethan Benson <erbenson@alaska.net> for a number of patches to
make the driver more compliant with the spec.