[ Upstream commit f6c8e432 ]

nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 31ffa563 ]

Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c5a94f43 ]

It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().

At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.

When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared.  This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared

There is some uncertainty in this analysis, but it seems to be fit the
observations.  Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.

Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.

The backtrace for the blocked process looked like:

PID: 29360  TASK: ffff881ff2ac0f80  CPU: 3   COMMAND: "zsh"
 #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1
 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed
 #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8
 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e
 #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache]
 #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache]
 #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs]
 #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs]
 #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73
 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs]
#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756
#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa
#12 [ffff881ff43eff18] sys_read at ffffffff811fda62
#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 89d328f6 ]

The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.

This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:

  [    2.790759] pstore: crypto_comp_decompress failed, ret = -22!

Backporting this depends on commit 70ad35db ("pstore: Convert console
write to use ->write_buf")
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a9 ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 12366410 ]

This reverts commit b3cf8528.

That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.

The original issue that commit has tried to workaround fa564ad9
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a55173 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 72791ac8 ]

Add a missing header otherwise compiler warns about missed prototype:

drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes]
  int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma,
      ^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Srikanth Boddepalli <boddepalli.srikanth@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 30062562 ]

v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ad97d9de ]

Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c7589401 ]

The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a8bf879a ]

Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.

This is done by the out-of-tree driver but the fix wasn't in mainline.

Fixes: e23f3336 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0c ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e4c39f79 ]

This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9a24ce5b ]

[Description]

In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend.  This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time.  This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree.  During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.

[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.

  [dhowells: Note that I've removed the clearance and put of newpage as
   they aren't attested in the commit message and don't appear to actually
   achieve anything since a new page is only allocated is newpage!=NULL and
   any residual new page is cleared before returning.]

[Testing]
I have tested the fix using following method for 12+ hrs.

1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
   (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   ..
   ..
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
   free -h , cat /proc/meminfo and page-types -r -b lru
   to ensure all pages are freed.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ca089878 ]

There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:

   %nft add table ip filter
   %nft add chain ip filter c1
   %nft add chain ip filter c1
   %nft add rule ip filter c1 jump c2
   %nft replace rule ip filter c1 handle 3 accept
   %nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().

Splat looks like:
[  214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Modules linked in: nf_tables nfnetlink
[  214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[  214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[  214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[  214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[  214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[  214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[  214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[  214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[  214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[  214.398983] FS:  0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[  214.398983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[  214.398983] Call Trace:
[  214.398983]  ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[  214.398983]  ? __kasan_slab_free+0x145/0x180
[  214.398983]  ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[  214.398983]  ? kfree+0xdb/0x280
[  214.398983]  nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]

Fixes: bb7b40ae ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c9287fa6 ]

list_for_each_entry_safe() is not safe for deleting entries from the
list if the spin lock, which protects it, is released and reacquired during
the list iteration. Fix this issue by replacing this construction with
a simple check if list is empty and removing the first entry in each
iteration. This is almost equivalent to a revert of the commit mentioned in
the Fixes: tag.

This patch fixes following issue:
--->8---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events eth_work
PC is at rx_fill+0x60/0xac
LR is at _raw_spin_lock_irqsave+0x50/0x5c
pc : [<c065fee0>]    lr : [<c0a056b8>]    psr: 80000093
sp : ee7fbee8  ip : 00000100  fp : 00000000
r10: 006000c0  r9 : c10b0ab0  r8 : ee7eb5c0
r7 : ee7eb614  r6 : ee7eb5ec  r5 : 000000dc  r4 : ee12ac00
r3 : ee12ac24  r2 : 00000200  r1 : 60000013  r0 : ee7eb5ec
Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 6d5dc04a  DAC: 00000051
Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval))
Stack: (0xee7fbee8 to 0xee7fc000)
...
[<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738)
[<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8)
[<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164)
[<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee7fbfb0 to 0xee7fbff8)
...
---[ end trace 64480bc835eba7d6 ]---

Fixes: fea14e68 ("usb: gadget: u_ether: use better list accessors")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 24a6d2dd ]

Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:

$rmmod nicvf
$rmmod nicpf

[  521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[  521.422777] Mem abort info:
[  521.425561]   ESR = 0x96000004
[  521.428624]   Exception class = DABT (current EL), IL = 32 bits
[  521.434535]   SET = 0, FnV = 0
[  521.437579]   EA = 0, S1PTW = 0
[  521.440730] Data abort info:
[  521.443603]   ISV = 0, ISS = 0x00000004
[  521.447431]   CM = 0, WnR = 0
[  521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[  521.457022] [0000000000000014] pgd=0000000000000000
[  521.461916] Internal error: Oops: 96000004 [#1] SMP
[  521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[  521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[  521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[  521.527808] lr : pci_device_remove+0x48/0xd8
[  521.532066] sp : ffff000013433cc0
[  521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[  521.540672] x27: 0000000000000000 x26: 0000000000000000
[  521.545974] x25: 0000000056000000 x24: 0000000000000015
[  521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[  521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[  521.561877] x19: 0000000000000000 x18: 0000000000000025
[  521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[  521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[  521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[  521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[  521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[  521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[  521.621490] Call trace:
[  521.623928]  nic_remove+0x24/0x88 [nicpf]
[  521.627927]  pci_device_remove+0x48/0xd8
[  521.631847]  device_release_driver_internal+0x1b0/0x248
[  521.637062]  driver_detach+0x50/0xc0
[  521.640628]  bus_remove_driver+0x60/0x100
[  521.644627]  driver_unregister+0x34/0x60
[  521.648538]  pci_unregister_driver+0x24/0xd8
[  521.652798]  nic_cleanup_module+0x14/0x111c [nicpf]
[  521.657672]  __arm64_sys_delete_module+0x150/0x218
[  521.662460]  el0_svc_handler+0x94/0x110
[  521.666287]  el0_svc+0x8/0xc
[  521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1e4329ee ]

The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:

arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 354cb410 ]

We get the following warnings about empty statements when building
with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 75b7b86b ]

Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.

The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.

Fixes: db570d7d ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 508b0904 ]

When ip6_route_me_harder is invoked, it resets outgoing interface of:
  - link-local scoped packets sent by neighbor discovery
  - multicast packets sent by MLD host
  - multicast packets send by MLD proxy daemon that sets outgoing
    interface through IPV6_PKTINFO ipi6_ifindex

Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 31e1ab49 ]

This essential mode for PAL users is missing, so add it.

Fixes: 335e3713 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.comSigned-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 069caf59 ]

Commit 387f869d ("usb: gadget: u_ether: conditionally align
transfer size") started aligning transfer size only if requested,
breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore
the old behaviour.

Fixes: 387f869d ("usb: gadget: u_ether: conditionally align transfer size")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2c2322fb ]

On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ca6695f ]

On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 99f70036 ]

We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.

Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.

The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 286afdde ]

The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2a31e4bd ]

ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.

Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.

As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:

  unregister_netdevice: waiting for br0 to become free. Usage count = 3

To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.

Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.

Fixes: 7a4f0761 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1efb6ee3 ]

A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2084ac6c ]

The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.

Fixes: a056cc89("exportfs: stop retrying once we race with
rename/remove")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ffdcc363 ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 373a500e ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dd2f52d8 ]

The latency number is in usec for the pm_qos. Correct the calculation to
give us the time in usec
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4f32fb92 ]

rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.

Fix the signature so we are not calling a function pointer with a
mismatched signature.

Fixes: 477864c8 ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 074fca3a ]

Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.

Without this patch krping doesn't work on CX-5 devices and throws
following error:

The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32

Fixed the logic to set the correct fence type.

Fixes: 6e8484c5 ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a4390aee ]

When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().

An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.

Parent snapshot:

 .
 |--- 261/
       |--- 271/
             |--- 266/
                   |--- 259/
                   |--- 260/
                   |     |--- 267
                   |
                   |--- 264/
                   |     |--- 258/
                   |           |--- 257/
                   |
                   |--- 265/
                   |--- 268/
                   |--- 269/
                   |     |--- 262/
                   |
                   |--- 270/
                   |--- 272/
                   |     |--- 263/
                   |     |--- 275/
                   |
                   |--- 274/
                         |--- 273/

Send snapshot:

 .
 |-- 275/
      |-- 274/
           |-- 273/
                |-- 262/
                     |-- 269/
                          |-- 258/
                               |-- 271/
                                    |-- 268/
                                         |-- 267/
                                              |-- 270/
                                                   |-- 259/
                                                   |    |-- 265/
                                                   |
                                                   |-- 272/
                                                        |-- 257/
                                                             |-- 260/
                                                             |-- 264/
                                                                  |-- 263/
                                                                       |-- 261/
                                                                            |-- 266/

When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.

When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:

1) We issue the move operation for inode 274;

2) Because inode 262 depended on the move operation of inode 274 (it was
   delayed because 274 is its ancestor in the send snapshot), we issue the
   move operation for inode 262;

3) We issue the move operation for inode 272, because it was delayed by
   inode 274 too (ancestor of 272 in the send snapshot);

4) We issue the move operation for inode 269 (it was delayed by 262);

5) We issue the move operation for inode 257 (it was delayed by 272);

6) We issue the move operation for inode 260 (it was delayed by 272);

7) We issue the move operation for inode 258 (it was delayed by 269);

8) We issue the move operation for inode 264 (it was delayed by 257);

9) We issue the move operation for inode 271 (it was delayed by 258);

10) We issue the move operation for inode 263 (it was delayed by 264);

11) We issue the move operation for inode 268 (it was delayed by 271);

12) We verify if we can issue the move operation for inode 270 (it was
    delayed by 271). We detect a path loop in the current state, because
    inode 267 needs to be moved first before we can issue the move
    operation for inode 270. So we delay again the move operation for
    inode 270, this time we will attempt to do it after inode 267 is
    moved;

13) We issue the move operation for inode 261 (it was delayed by 263);

14) We verify if we can issue the move operation for inode 266 (it was
    delayed by 263). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12);

15) We issue the move operation for inode 267 (it was delayed by 268);

16) We verify if we can issue the move operation for inode 266 (it was
    delayed by 270). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12). So here we added
    again the same delayed move operation that we added in step 14;

17) We attempt again to see if we can issue the move operation for inode
    266, and as in step 16, we realize we can not due to a path loop in
    the current state due to a dependency on inode 270. Again we delay
    inode's 266 rename to happen after inode's 270 move operation, adding
    the same dependency to the empty stack that we did in steps 14 and 16.
    The next iteration will pick the same move dependency on the stack
    (the only entry) and realize again there is still a path loop and then
    again the same dependency to the stack, over and over, resulting in
    an infinite loop.

So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.

A test case for fstests, with this reproducer, follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4ab7ca09 ]

The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.

Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.

Fix the device tree, and the performance of Flash access is improved.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 22566c16 ]

Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name().  In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table().  The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.

Fix by copying the search string instead of modifying it in place.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0b9301fb ]

If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 68bc10bf ]

This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8 ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ce ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ce was kept, which eliminated
the link training check placed there by 4d107d3b. However, the
version of imx6_pcie_link_up() from 4d107d3b was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8 ("Merge branch 'pci/host-designware' into next")
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b01c1f69 ]

When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:

  nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
    setns(newns, 0);
  ...
  new ns related open..
  ...
  nsinfo__mountns_exit(struct nscookie *nc)
    setns(nc->oldns)

Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.

This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':

  # perf diff
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  ...

Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 843ff37b ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 09aaf681 ]

Both datasheet and comments of store_temp_mode() tell us that temp1~4_type
is writable, so fix it.
Signed-off-by: Yao Wang <wangyao@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Fixes: 39deb699 (" hwmon: (w83795) Simplify temperature sensor type handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>