- 07 Oct, 2019 32 commits
-
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: misc cleanup This patch set consists of some cleanup patches ranging from removing dead code to fixing a minor issue in ethtool stats. Also, unbounded while loops are removed from the driver by adding a maximum number of retries for DPIO portal commands. Changes in v2: - return -ETIMEDOUT where possible if the number of retries is hit ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
Throughout the driver there are several places where we wait indefinitely for DPIO portal commands to be executed, while the portal returns a busy response code. Even though in theory we are guaranteed the portals become available eventually, in practice the QBMan hardware module may become unresponsive in various corner cases. Make sure we can never get stuck in an infinite while loop by adding a retry counter for all portal commands. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Radulescu authored
Don't print error message for a successful return value. Fixes: d84c3a4d ("dpaa2-eth: Add new DPNI statistics counters") Signed-off-by:
-
Ioana Radulescu authored
Remove one function call whose result was not used anywhere. Signed-off-by:
-
Colin Ian King authored
Don't populate the array tick_array on the stack but instead make it static. Makes the object code smaller by 29 bytes. Before: text data bss dec hex filename 19191 432 0 19623 4ca7 hisilicon/hns3/hns3pf/hclge_tm.o After: text data bss dec hex filename 19098 496 0 19594 4c8a hisilicon/hns3/hns3pf/hclge_tm.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays port_map and sl_map on the stack but instead make them static. Makes the object code smaller by 64 bytes. Before: text data bss dec hex filename 49575 6872 64 56511 dcbf hisilicon/hns/hns_dsaf_main.o After: text data bss dec hex filename 49350 7032 64 56446 dc7e hisilicon/hns/hns_dsaf_main.o (gcc version 9.2.1, amd64) Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: minor micro optimizations This set brings a number of minor code changes from my tree which don't have a noticeable impact on performance but seem reasonable nonetheless. First sk_msg_sg copy array is converted to a bitmap, zeroing that structure takes a lot of time, hence we should try to keep it small. Next two conditions are marked as unlikely, GCC seemed to had little trouble correctly reasoning about those. Patch 4 adds parameters to tls_device_decrypted() to avoid walking structures, as all callers already have the relevant pointers. Lastly two boolean members of TLS context structures are converted to a bitfield. ==================== Signed-off-by: -
Jakub Kicinski authored
Use a single bit instead of boolean to remember if packet was already decrypted. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Store async_capable on a single bit instead of a full integer to save space. Signed-off-by:
-
Jakub Kicinski authored
Avoid unnecessary pointer chasing and calculations, callers already have most of the state tls_device_decrypted() needs. Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Make sure GCC realizes it's unlikely that allocations will fail. Signed-off-by:
-
Jakub Kicinski authored
Tell GCC sk->err is not likely to be set. Signed-off-by:
-
Jakub Kicinski authored
Don't use bool array in struct sk_msg_sg, save 12 bytes. Signed-off-by:
-
Heiner Kallweit authored
Use helper skb_ensure_writable in two more places to simplify the code. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Consistent with how pskb_may_pull() also now does so. Signed-off-by: -
Heiner Kallweit authored
This function de-facto returns a bool, so let's change the return type accordingly. Signed-off-by:
-
David S. Miller authored
Sameeh Jubran says: ==================== ena: Support ethtool set_channels Difference from v2: * ethtool's set/get channels: Switched to using combined instead of separate rx/tx * Fixed error handling in set_channels * Fixed indentation and cosmetic issues as requested by Jakub Kicinski Difference from v1: * Dropped the print from patch 0002 - "net: ena: multiple queue creation related cleanups" as requested by David Miller ==================== Signed-off-by: -
Sameeh Jubran authored
Set channels callback enables the user to change the count of queues used by the driver using ethtool. We decided to currently support only equal number of rx and tx queues, this might change in the future. Also rename dev_up to dev_was_up in ena_update_queue_count() to make it clearer. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
The number of queues can be derived using ethtool, no need to print it in ena_probe() Signed-off-by:
-
Sameeh Jubran authored
- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues so that ethtool -l returns the correct maximum queue number. - Change the name of ena_calc_io_queue_num() to ena_calc_max_io_queue_num() as it returns the maximum number of io queues and actual number of queues can be smaller if changed by ethtool -L which is implemented in a later commit. - Change variable name from io_queue_num to max_num_io_queues in ena_calc_max_io_queue_num() and ena_probe(). - Make all types of variables that convey the number and sizeof queues to be u32, for consistency with the API between the driver and the device. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
Since we use the same IRQ and NAPI to service RX and TX then we need to use a combined channel instead of rx and tx channels. Signed-off-by:
-
Sameeh Jubran authored
- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity and consistency - Remove redundant number of io queues parameter in functions ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(), which already get adapter parameter, so use adapter->num_io_queues in the function instead. - Use the local variable ena_dev instead of ctx->ena_dev in ena_calc_io_queue_size - Fix multi row comment alignments Signed-off-by:
-
Sameeh Jubran authored
Most places in the code refer to the IO queues as io_queues and not simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES, ena_destroy_all_io_queues() etc.. We are also adding the new max_num_io_queues field to struct ena_adapter in the following commit. The changes included in this commit are: struct ena_adapter->num_queues => struct ena_adapter->num_io_queues Signed-off-by:
-
David S. Miller authored
Daniel T. Lee says: ==================== samples: pktgen: allow to specify destination IP range Currently, pktgen script supports specify destination port range. To further extend the capabilities, this commit allows to specify destination IP range with CIDR when running pktgen script. Specifying destination IP range will be useful on various situation such as testing RSS/RPS with randomizing n-tuple. This patchset fixes the problem with checking the command result on proc_cmd, and add feature to allow destination IP range. ==================== Signed-off-by: -
Daniel T. Lee authored
Currently, kernel pktgen has the feature to specify destination address range for sending packet. (e.g. pgset "dst_min/dst_max") But on samples, each pktgen script doesn't have any option to achieve this. This commit adds the feature to specify the destination address range with CIDR. -d : ($DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed # ./pktgen_sample01_simple.sh -6 -d fe80::20/126 -p 3000 -n 4 # tcpdump ip6 and udp 05:14:18.082285 IP6 fe80::99.71 > fe80::23.3000: UDP, length 16 05:14:18.082564 IP6 fe80::99.43 > fe80::23.3000: UDP, length 16 05:14:18.083366 IP6 fe80::99.107 > fe80::22.3000: UDP, length 16 05:14:18.083585 IP6 fe80::99.97 > fe80::21.3000: UDP, length 16 Signed-off-by:Daniel T. Lee <danieltimlee@gmail.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Daniel T. Lee authored
This commit adds CIDR parsing and IP validate helper function to parse single IP or range of IP with CIDR. (e.g. 198.18.0.0/15) Validating the address should be preceded prior to the parsing. Helpers will be used in prior to set target address in samples/pktgen. Signed-off-by:
-
Daniel T. Lee authored
Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread', 'pg_set'. proc_cmd is designed to check command result with grep the "Result:", but this might fail since this string is only shown in 'pg_thread' and 'pg_set'. This commit fixes this logic by grep-ing the "Result:" string only when the command is not for 'pg_ctrl'. For clarity of an execution flow, 'errexit' flag has been set. To cleanup pktgen on exit, trap has been added for EXIT signal. Signed-off-by:
-
Daniel T. Lee authored
This commit changes variable names that can cause confusion. For example, variable DST_MIN is quite confusing since the keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl. On the following commit, 'dst_min' will be used to set destination IP, and the existing variable name DST_MIN should be changed. Variable names are matched to the exact keyword used with pg_ctrl. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== netdevsim: implement devlink dev_info op Initial implementation of devlink dev_info op - just driver name is filled up and sent to user. Bundled with selftest. ==================== Signed-off-by: -
Jiri Pirko authored
Add test to verify netdevsim driver name returned by devlink dev info. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Do simple dev_info devlink operation implementation which only fills up the driver name. Signed-off-by:
-
Jiri Pirko authored
In order for attrs to be prepared for reporter dump dumpit callback, set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP. Fixes: ee85da53 ("devlink: have genetlink code to parse the attrs during dumpit" Signed-off-by:
-
- 06 Oct, 2019 8 commits
-
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Improvements for -next Improvements for -next. More info in commit logs. ==================== Signed-off-by: -
Jose Abreu authored
GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the corresponding callbacks in these cores. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
Add two new tests for VLAN Perfect Filtering. While at it, increase a little bit the tests strings lenght so that we can have more descriptive test names. Signed-off-by:
-
Jose Abreu authored
If VLAN Hash Filtering is not available we can fallback to perfect filtering instead. Let's implement this in XGMAC and GMAC cores and let the user use this filter. VLAN VID=0 always passes filter so we check if more than 2 VLANs are created and return proper error code if so because perfect filtering only supports 1 VID at a time. Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
YueHaibing authored
Fix build error: net/rds/ib_cm.c: In function rds_dma_hdrs_alloc: net/rds/ib_cm.c:475:13: error: implicit declaration of function dma_pool_zalloc; did you mean mempool_alloc? [-Werror=implicit-function-declaration] hdrs[i] = dma_pool_zalloc(pool, GFP_KERNEL, &hdr_daddrs[i]); ^~~~~~~~~~~~~~~ mempool_alloc net/rds/ib.c: In function rds_ib_dev_free: net/rds/ib.c:111:3: error: implicit declaration of function dma_pool_destroy; did you mean mempool_destroy? [-Werror=implicit-function-declaration] dma_pool_destroy(rds_ibdev->rid_hdrs_pool); ^~~~~~~~~~~~~~~~ mempool_destroy Reported-by:Hulk Robot <hulkci@huawei.com> Fixes: 9b17f588 ("net/rds: Use DMA memory pool allocation for rds_header") Signed-off-by:
-
