- 03 Jun, 2021 4 commits
-
-
Nuno Sa authored
Some supported devices support burst read function. This provides a method for reading a batch of data (status, temperature, gyroscopes, accelerometers, time stamp/data counter, and CRC code), which does not require a stall time between each 16-bit segment and only requires one command on the DIN line to initiate. Devices supporting this mode are: * adis16495-1 * adis16495-2 * adis16495-3 * adis16497-1 * adis16497-2 * adis16497-3 Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210422103735.136367-1-nuno.sa@analog.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jiapeng Chong authored
Variable in_loc is being assigned a value from a calculation however the assignment is never read, so this redundant assignment can be removed. Clean up the following clang-analyzer warning: drivers/iio/industrialio-buffer.c:929:3: warning: Value stored to 'in_loc' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1621246317-62725-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Jonathan Cameron authored
The call to pm_runtime_put_noidle() in remove() callback is not balanced by any gets Note this doesn't cause any problems beyond reader confusion as the runtime pm core protects against the reference counter going negative. Whilst here, use pm_runtiem_resume_and_get() to simplify code a little. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-9-jic23@kernel.org
-
Dan Carpenter authored
These variables are unsigned so the condition can't be less than zero and the warning message will never be printed. Fixes: 9374e8f5 ("iio: adc: add ADC driver for the TI TSC2046 controller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YJ+ZuO43TnguY5vq@mwandaSigned-off-by:
-
- 17 May, 2021 36 commits
-
-
Dan Carpenter authored
This return statement is indented one more tab than it should be. Signed-off-by:
-
Dan Carpenter authored
These variables need to be int for the error handling to work. Fixes: 2335f0d7 ("iio: light: Added AMS tsl2591 driver implementation") Signed-off-by:
-
Tang Bin authored
In the function ad7766_probe(), the return value of devm_iio_device_register() can be zero or ret, Thus it is unnecessary to repeated check here. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Co-developed-by:
-
Dan Carpenter authored
The devm_iio_device_alloc() function is supposed to return NULL and not error pointers. Returning an error pointer will lead to a crash in the callers. Fixes: cf5724e9 ("iio: core: simplify some devm functions") Signed-off-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/YJ+a1yaMu2QNATgt@mwandaSigned-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted. Here structure is not used, because this buffer is also used elsewhere in the driver. Fixes: 67e17300 ("iio: potentiostat: add LMP91000 support") Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210501171352.512953-8-jic23@kernel.org
-
Jonathan Cameron authored
The samples buffer is passed to iio_push_to_buffers_with_timestamp() which requires a buffer aligned to 8 bytes as it is assumed that the timestamp will be naturally aligned if present. Fixes tag is inaccurate but prior to that likely manual backporting needed (for anything before 4.18) Earlier than that the include file to fix is drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h: commit 974e6f02 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") present since kernel stable 4.10. (Thanks to Gwendal for tracking this down) Fixes: 5a0b8cb4 ("iio: cros_ec: Move cros_ec_sensors_core.h in /include") Signed-off-by:
-
Jonathan Cameron authored
Variable location for the timestamp, so just use __aligned(8) to ensure it is always possible to naturally align it. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes tag is not accurate, but it will need manual backporting beyond that point if anyone cares. Fixes: 0d15190f ("iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp(). Fixes tag is not strictly accurate as prior to that patch there was potentially an unaligned write. However, any backport past there will need to be done manually. Fixes: 0624bf84 ("iio:tcs3472: Use iio_push_to_buffers_with_timestamp()") Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210501170121.512209-20-jic23@kernel.org
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: a244e7b5 ("iio: Add driver for AMS/TAOS tcs3414 digital color sensor") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 6c25539c ("iio: Add Intersil isl29125 digital color light sensor driver") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: c91746a2 ("iio: magn: Add support for BMC150 magnetometer") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 7247645f ("iio: hmc5843: Move hmc5843 out of staging") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 37b1ba2c ("iio: proximity: as3935: fix buffer stack trashing") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: cb119d53 ("iio: proximity: add support for PulsedLight LIDAR") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 78f83902 ("iio: distance: srf08: add IIO driver for us ranger") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 0d96d5ea ("iio: humidity: Add triggered buffer support for AM2315") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 13426454 ("iio: bmg160: Separate i2c and core driver") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 0010d6b4 ("iio: adc: vf610: Add IIO buffer support for Vybrid ADC") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: ecc24e72 ("iio: adc: Add TI ADS1015 ADC driver support") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: db6a19b8 ("iio: accel: Add trigger support for STK8BA50") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 95c12bba ("iio: accel: Add buffer mode for Sensortek STK8312") Signed-off-by:
-
Jonathan Cameron authored
The bulk read size is based on the size of an array that also has space for the timestamp alongside the channels. Fix that and also fix alignment of the buffer passed to iio_push_to_buffers_with_timestamp. Found during an audit of all calls to this function. Fixes: 1ce0eda0 ("iio: mxc4005: add triggered buffer mode for mxc4005") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 1a4fbf6a ("iio: accel: kxcjk1013 3-axis accelerometer driver") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Note this matches what was done in all the other hid sensor drivers. This one was missed previously due to an extra level of indirection. Found during an audit of all calls of this function. Fixes: a96cd0f9 ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 194dc4c7 ("iio: accel: Add triggered buffer support for BMA220") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: b9a6a237 ("iio:bma180: Drop _update_scan_mode()") Signed-off-by:
-
Jonathan Cameron authored
Remove() callback calls pm_runtime_put_noidle() but there it is not balancing a get. No actual affect because the runtime pm core prevents the reference count going negative. Whilst here use pm_runtime_resume_and_get() rather than open coded version. Again, coccinelle script missed this one due to more complex code structure. Signed-off-by:
-
Jonathan Cameron authored
Calls to pm_runtime_put_noidle in probe() error path and remove() are not match to any get() calls. The runtime pm core protects against negative reference counts, so this doesn't have any visible impact beyond confusing the reader. Whilst here use pm_runtime_resume_and_get() to replace boilerplate. Signed-off-by:
-
Jonathan Cameron authored
probe() error paths after runtime pm is enabled, should disable it. remove() should not call pm_runtime_put_noidle() as there is no matching get() to have raised the reference count. This case has no affect a the runtime pm core protects against going negative. Whilst here use pm_runtime_resume_and_get() to tidy things up a little. coccicheck script didn't get this one due to complex code structure so found by inspection. Signed-off-by:
-
Jonathan Cameron authored
The call to pm_runtime_put_noidle() in remove() is not balanced by a get so drop it. Using pm_runtime_resume_and_get() allows for simple introduction of error handling to allow for runtime resume failing. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Previously this driver used pm_runtime_sync_get() and did not handle any errors that occurred. Moving to the new pm_runtime_resume_and_get() + handle errors. Signed-off-by:
-
Jonathan Cameron authored
1 instance found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ The other instance changed did not check for failure of the pm_runtime_get_sync() so that is added. Note the remaining pm_runtime_get_sync() call is left alone because it is not obvious what to do on failure to power up in remove() This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Converts from using pm_runtime_get_sync() with no error handling over to pm_runtime_resume_and_get() which will ensure we don't end up holding a reference. Ensure this error return is then handled at calls to mlx90614_power_get(). These are all direct returns. Signed-off-by:
-
