- 11 May, 2016 38 commits
-
-
Johannes Weiner authored
commit 4550c4e1 upstream. Cgroup2 currently doesn't have a per-cgroup swappiness setting. We might want to add one later - that's a different discussion - but until we do, the cgroups should always follow the system setting. Otherwise it will be unchangeably set to whatever the ancestor inherited from the system setting at the time of cgroup creation. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 689de1d6 upstream. This is a fairly minimal fixup to the horribly bad behavior of hash_64() with certain input patterns. In particular, because the multiplicative value used for the 64-bit hash was intentionally bit-sparse (so that the multiply could be done with shifts and adds on architectures without hardware multipliers), some bits did not get spread out very much. In particular, certain fairly common bit ranges in the input (roughly bits 12-20: commonly with the most information in them when you hash things like byte offsets in files or memory that have block factors that mean that the low bits are often zero) would not necessarily show up much in the result. There's a bigger patch-series brewing to fix up things more completely, but this is the fairly minimal fix for the 64-bit hashing problem. It simply picks a much better constant multiplier, spreading the bits out a lot better. NOTE! For 32-bit architectures, the bad old hash_64() remains the same for now, since 64-bit multiplies are expensive. The bigger hashing cleanup will replace the 32-bit case with something better. The new constants were picked by George Spelvin who wrote that bigger cleanup series. I just picked out the constants and part of the comment from that series. Cc: George Spelvin <linux@horizon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Shaohua Li authored
commit 9c573de3 upstream. blk_queue_split marks bio unmergeable, which makes sense for normal bio. But if dispatching the bio to underlayer disk, the blk_queue_split checks are invalid, hence it's possible the bio becomes mergeable. In the reported bug, this bug causes trim against raid0 performance slash https://bugzilla.kernel.org/show_bug.cgi?id=117051Reported-and-tested-by:
Park Ju Hyung <qkrwngud825@gmail.com> Fixes: 6ac45aeb(block: avoid to merge splitted bio) Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Chunyu Hu authored
commit 854145e0 upstream. Currently register functions for events will be called through the 'reg' field of event class directly without any check when seting up triggers. Triggers for events that don't support register through debug fs (events under events/ftrace are for trace-cmd to read event format, and most of them don't have a register function except events/ftrace/functionx) can't be enabled at all, and an oops will be hit when setting up trigger for those events, so just not creating them is an easy way to avoid the oops. Link: http://lkml.kernel.org/r/1462275274-3911-1-git-send-email-chuhu@redhat.com Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Johannes Berg authored
commit e6436be2 upstream. In the case that dev_alloc_name() fails, e.g. because the name was given by the user and already exists, we need to clean up properly and free the per-CPU statistics. Fix that. Fixes: 5a490510 ("mac80211: use per-CPU TX/RX statistics") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Oleksij Rempel authored
commit de478a61 upstream. by moving common code to ar5008_hw_cmn_spur_mitigate i forgot to move mask_m & mask_p initialisation. This coused a performance regression on ar9281. Fixes: f911085f ("ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.") Reported-by:
Gustav Frederiksen <lkml2017@openmailbox.org> Tested-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ville Syrjälä authored
commit 7df89e92 upstream. Calling gpiod_get() from a module and then unloading the module leads to an oops due to acpi_can_fallback_to_crs() storing the pointer to the passed 'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then try to access the string but the memory may now be gone with the module. Make a copy of the passed string instead, and store the copy on the list. BUG: unable to handle kernel paging request at ffffffffa03e7855 IP: [<ffffffff81338322>] strcmp+0x12/0x30 PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm] CPU: 2 PID: 3064 Comm: modprobe Tainted: G U W 4.6.0-rc3-ffrd-ipvr+ #302 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8 _X64_R_2014_13_1_00 03/24/2014 task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000 RIP: 0010:[<ffffffff81338322>] [<ffffffff81338322>] strcmp+0x12/0x30 RSP: 0000:ffff880070037748 EFLAGS: 00010286 RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856 RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855 R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea FS: 00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0 Stack: ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000 ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800 00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170 Call Trace: [<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100 [<ffffffff8136852e>] gpiod_get_index+0x25e/0x310 [<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30 [<ffffffff813685f2>] gpiod_get+0x12/0x20 [<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915] [<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915] [<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915] [<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm] [<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915] [<ffffffff81379751>] pci_device_probe+0x91/0x100 [<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0 [<ffffffff8141a8be>] __driver_attach+0x9e/0xb0 [<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0 [<ffffffff81418439>] bus_for_each_dev+0x69/0xa0 [<ffffffff8141a04e>] driver_attach+0x1e/0x20 [<ffffffff81419c20>] bus_add_driver+0x1c0/0x240 [<ffffffff8141b6d0>] driver_register+0x60/0xe0 [<ffffffff81377d20>] __pci_register_driver+0x60/0x70 [<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm] [<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10 [<ffffffffa02f1000>] ? 0xffffffffa02f1000 [<ffffffffa02f1094>] i915_init+0x94/0x9b [i915] [<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0 [<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90 [<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270 [<ffffffff81183826>] do_init_module+0x60/0x1dc [<ffffffff81115a8d>] load_module+0x1d0d/0x2390 [<ffffffff811120b0>] ? __symbol_put+0x70/0x70 [<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120 [<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0 [<ffffffff8111631e>] SyS_finit_module+0xe/0x10 [<ffffffff81001ff3>] do_syscall_64+0x63/0x350 [<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25 Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66 RIP [<ffffffff81338322>] strcmp+0x12/0x30 RSP <ffff880070037748> CR2: ffffffffa03e7855 v2: Make the copied con_id const Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Alexandre Courbot <gnurou@gmail.com> Fixes: 10cf4899 ("gpiolib: tighten up ACPI legacy gpio lookups") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit aeb6641f upstream. gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
David Rivshin authored
commit 7b0883f3 upstream. When converting period and duty_cycle from nanoseconds to fclk cycles, the error introduced by the integer division can be appreciable, especially in the case of slow fclk or short period. Use DIV_ROUND_CLOSEST_ULL() so that the error is kept to +/- 0.5 clock cycles. Fixes: 6604c655 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by:
David Rivshin <drivshin@allworx.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
David Rivshin authored
commit cd378881 upstream. Add sanity checking to ensure that we do not program load or match values that are out of range if a user requests period or duty_cycle values which are not achievable. The match value cannot be less than the load value (but can be equal), and neither can be 0xffffffff. This means that there must be at least one fclk cycle between load and match, and another between match and overflow. Fixes: 6604c655 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by:
-
David Rivshin authored
commit f8caa792 upstream. Fix the calculation of load_value and match_value. Currently they are slightly too low, which produces a noticeably wrong PWM rate with sufficiently short periods (i.e. when 1/period approaches clk_rate/2). Example: clk_rate=32768Hz, period=122070ns, duty_cycle=61035ns (8192Hz/50% PWM) Correct values: load = 0xfffffffc, match = 0xfffffffd Current values: load = 0xfffffffa, match = 0xfffffffc effective PWM: period=183105ns, duty_cycle=91553ns (5461Hz/50% PWM) Fixes: 6604c655 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 4d3ac666 upstream. The change fixes potential oops while accessing iomem on invalid address, if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Fixes: 5e63dcc7 ("clk: bcm2835: Add a driver for the auxiliary peripheral clock gates") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Loc Ho authored
commit 0f4c7a13 upstream. In the initial fix for non-zero divider shift value, the parenthesis was missing after the negate operation. This patch adds the required parenthesis. Otherwise, lower bits may be cleared unintentionally. Signed-off-by:
Loc Ho <lho@apm.com> Acked-by:
Toan Le <toanle@apm.com> Fixes: 1382ea63 ("clk: xgene: Fix divider with non-zero shift value") Signed-off-by:
-
Chen-Yu Tsai authored
commit 33f60d02 upstream. The APB0 clock on A23 is a zero-based divider, not a power-of-two based divider. Note that this patch does not apply cleanly to kernels before 4.5-rc1, which added CLK_OF_DECLARE support to this driver. Fixes: 57a1fbf2 ("clk: sunxi: Add A23 APB0 divider clock support") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Stephen Boyd authored
commit 0f75e1a3 upstream. The offset seems to have been copied from the sata clk. Fix it so that enabling the crypto engine source clk works. Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 5f775498 ("clk: qcom: Fully support apq8064 global clock control") Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
-
Srinivas Kandagatla authored
commit 732d6913 upstream. This patch corrects the enable register offset which is actually 0x36cc instead of 0x36c4 Signed-off-by:
-
Andreas Färber authored
commit bb473593 upstream. As preparation for arm64 based mesongxbb, which pulls in this code once enabling ARCH_MESON, fix a size_t vs. unsigned int type mismatch. The loop uses a local unsigned int variable, so adopt that type, matching the header. Fixes: 7a29a869 ("clk: meson: Add support for Meson clock controller") Signed-off-by:
Andreas Färber <afaerber@suse.de> Acked-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
-
Shawn Lin authored
commit 2467b674 upstream. Add free memeory if rockchip_clk_register_branch fails. Fixes: a245fecb ("clk: rockchip: add basic infrastructure...") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Shawn Lin authored
commit bb07698f upstream. mmc sample shift is 0 for rk3228 refer to user manaul. So it's broken if we enable mmc tuning for rk3228. Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228") Signed-off-by:
Xing Zheng <zhengxing@rock-chips.com> Signed-off-by:
-
Shawn Lin authored
commit 1d961f11 upstream. If we fail to probe the driver, we should not directly break from the for_each_available_child_of_node since it calls of_node_get while iterating. This patch add of_node_put to fix the unbalanced call pair. Fixes: 7c696693 ("soc: rockchip: power-domain: Add power domain driver") Signed-off-by:
-
Heiko Stuebner authored
commit 50359819 upstream. Commit e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") removed the special ops struct for read-only clocks and instead opted to handle them inside the regular ops. On the rk3368 this results in breakage as aclkm now gets set a value. While it is the same divider value, the A53 core still doesn't like it, which can result in the cpu ending up in a hang. The reason being that "ACLKENMasserts one clock cycle before the rising edge of ACLKM" and the clock should only be touched when STANDBYWFIL2 is asserted. To fix this, reintroduce the read-only ops but do include the round_rate callback. That way no writes that may be unsafe are done to the divider register in any case. The Rockchip use of the clk_divider_ops is adapted to this split again, as is the nxp, lpc18xx-ccu driver that was included since the original commit. On lpc18xx-ccu the divider seems to always be read-only so only uses the new ops now. Fixes: e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") Reported-by:
Zhang Qing <zhangqing@rock-chips.com> Signed-off-by:
-
Krzysztof Halasa authored
commit 88e9da9a upstream. The "where" offset was added twice, fix it. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Fixes: 498a92d4 ("ARM: cns3xxx: pci: avoid potential stack overflow") Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Amitkumar Karwar authored
commit a6139b62 upstream. This patch corrects the error case in association path by returning -1. Earlier "media_connected" used to remain on in this error case causing failure for further association attempts. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Fixes: b887664d ('mwifiex: channel switch handling for station') Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Ashok Raj Nagarajan authored
commit 53a5c9bc upstream. Currently, we are providing wrong payload data of pktlog to trace points. Data we receive from FW through copy engine 8 contains pktlog data alone. We don't need to parse anything in driver before handing it to trace points. Fixes: afb0bf7f ("ath10k: add support for pktlog in QCA99X0") Signed-off-by:
Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Andrzej Hajda authored
commit 68f37e5d upstream. wlcore_read/wlcore_write can return negative values so it should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120705 Fixes: 3719c17e ("wlcore/wl18xx: fw logger over sdio") Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Dan Carpenter authored
commit 8134233e upstream. If the call to acpi_get_object_info() fails then "info" hasn't been initialized. In that situation, we already know that "version" should be XGENE_AHCI_V1 so we don't actually need to dereference "info". Fixes: c9802a4b ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wenwei Tao authored
commit 3681c85d upstream. After register null_blk devices into lightnvm, we forget to add these devices to the the nullb_list, makes them invisible to the null_blk driver. Signed-off-by:
Wenwei Tao <ww.tao0320@gmail.com> Fixes: a514379b ("null_blk: oops when initializing without lightnvm") Signed-off-by:
-
Javier González authored
commit 6adb03de upstream. When an I/O finishes, full blocks are moved from the open to the closed list - a lock is taken to protect the list. This happens at the moment in the interrupt context, which is not correct. This patch moves this logic to the block workqueue instead, avoiding holding a spinlock without interrupt save in an interrupt context. Signed-off-by:
Javier González <javier@cnexlabs.com> Fixes: ff0e498b ("lightnvm: manage open and closed blocks sepa...") Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Andy Shevchenko authored
commit 84cb36ca upstream. We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe8 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Larry Finger authored
commit 73fb2705 upstream. Smatch reports the following warning: CHECK drivers/net/wireless/realtek/rtlwifi/rc.c drivers/net/wireless/realtek/rtlwifi/rc.c:144 _rtl_rc_rate_set_series() warn: impossible condition '(wireless_mode == 256) => (0-255 == 256)' This warning arises because commit acc6907b87a9 ("rtlwifi: Fix warning from ieee80211_get_tx_rates() when using 5G") now checks the wireless mode for WIRELESS_MODE_AC_ONLY (BIT(8)) in _rtl_rc_rate_set_series(). As a result, all quantities used to store the wireless mode must be u16. This patch also reorders struct rtl_sta_info to save a little space. Fixes: d76d65fd ("rtlwifi: fix broken VHT support") Reported-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Julian Anastasov authored
commit f719e375 upstream. Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead") Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
-
Arnd Bergmann authored
commit 3f20efba upstream. ip_vs_fill_iph_skb_off() may not find an IP header, and gcc has determined that ip_vs_sip_fill_param() then incorrectly accesses the protocol fields: net/netfilter/ipvs/ip_vs_pe_sip.c: In function 'ip_vs_sip_fill_param': net/netfilter/ipvs/ip_vs_pe_sip.c:76:5: error: 'iph.protocol' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (iph.protocol != IPPROTO_UDP) ^ net/netfilter/ipvs/ip_vs_pe_sip.c:81:10: error: 'iph.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] dataoff = iph.len + sizeof(struct udphdr); ^ This adds a check for the ip_vs_fill_iph_skb_off() return code before looking at the ip header data returned from it. Signed-off-by:
-
Leon Romanovsky authored
commit 91d9ed84 upstream. Add caching of maximum device capability of ATOMIC endian mode. Fixes: f91e6d89 ('net/mlx5_core: Add setting ATOMIC endian mode') Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Hariprasad S authored
commit 32cc92c7 upstream. For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
-
Daniel Lezcano authored
commit 16eeed7e upstream. Commit 0881841f introduced a regression by inverting a test check after calling clocksource_mmio_init(). That results on the system to hang at boot time. Fix it by inverting the test again. Fixes: 0881841f ("Replace code by clocksource_mmio_init") Reported-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
- 04 May, 2016 2 commits
-
-
Greg Kroah-Hartman authored
-
Robert Jarzmik authored
commit c283e41e upstream. The DMA chip has a fixed number of requestor lines used for flow control. This number is platform dependent. The pxa_dma dma driver will use this value to activate or not the flow control. There won't be any impact on mmp_pdma driver. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
