- 18 Apr, 2024 3 commits
-
-
Jakub Kicinski authored
build bot points out that I forgot to add the PAGE_POOL config dependency when adding the support in netdevsim. Fixes: 1580cbcb ("net: netdevsim: add some fake page pool use") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404170348.thxrboF1-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404170527.LIAPSyMB-lkp@intel.com/ Link: https://lore.kernel.org/r/20240416232137.2022058-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Coia Prant authored
Update the net usb qmi_wwan driver to support Longsung U8300/U9300. Enabling DTR on this modem was necessary to ensure stable operation. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up, to rebind it to qmi_wwan driver. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up. The proper configuration is: Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully using qmicli on U9300. Signed-off-by:
Coia Prant <coiaprant@gmail.com> Link: https://lore.kernel.org/r/20240415142638.1756966-1-coiaprant@gmail.comSigned-off-by:
-
Jakub Kicinski authored
selftest build is fairly noisy, it's easy to miss warnings. It's standard practice to add alternative messages in the Makefile. I was grepping for existing solutions, and found that bpf already has the right knobs. Move them to lib.mk and adopt in net. Convert the basic rules in lib.mk. Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240411190534.444918-1-kuba@kernel.orgSigned-off-by:
-
- 17 Apr, 2024 13 commits
-
-
Eric Dumazet authored
Andrew Oates reported that some macOS hosts could repeatedly send FIN packets even if the remote peer drops them and send back DUP ACK RWIN 0 packets. <quoting Andrew> 20:27:16.968254 gif0 In IP macos > victim: Flags [SEW], seq 1950399762, win 65535, options [mss 1460,nop,wscale 6,nop,nop,TS val 501897188 ecr 0,sackOK,eol], length 0 20:27:16.968339 gif0 Out IP victim > macos: Flags [S.E], seq 2995489058, ack 1950399763, win 1448, options [mss 1460,sackOK,TS val 3829877593 ecr 501897188,nop,wscale 0], length 0 20:27:16.968833 gif0 In IP macos > victim: Flags [.], ack 1, win 2058, options [nop,nop,TS val 501897188 ecr 3829877593], length 0 20:27:16.968885 gif0 In IP macos > victim: Flags [P.], seq 1:1449, ack 1, win 2058, options [nop,nop,TS val 501897188 ecr 3829877593], length 1448 20:27:16.968896 gif0 Out IP victim > macos: Flags [.], ack 1449, win 0, options [nop,nop,TS val 3829877593 ecr 501897188], length 0 20:27:19.454593 gif0 In IP macos > victim: Flags [F.], seq 1449, ack 1, win 2058, options [nop,nop,TS val 501899674 ecr 3829877593], length 0 20:27:19.454675 gif0 Out IP victim > macos: Flags [.], ack 1449, win 0, options [nop,nop,TS val 3829880079 ecr 501899674], length 0 20:27:19.455116 gif0 In IP macos > victim: Flags [F.], seq 1449, ack 1, win 2058, options [nop,nop,TS val 501899674 ecr 3829880079], length 0 The retransmits/dup-ACKs then repeat in a tight loop. </quoting Andrew> RFC 9293 3.4. Sequence Numbers states : Note that when the receive window is zero no segments should be acceptable except ACK segments. Thus, it is be possible for a TCP to maintain a zero receive window while transmitting data and receiving ACKs. However, even when the receive window is zero, a TCP must process the RST and URG fields of all incoming segments. Even if we could consider a bare FIN.ACK packet to be an ACK in RFC terms, the retransmits should use exponential backoff. Accepting the FIN in linux does not add extra memory costs, because the FIN flag will simply be merged to the tail skb in the receive queue, and incoming packet is freed. Reported-by:
Andrew Oates <aoates@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Vidhi Goel <vidhi_goel@apple.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yujie Liu authored
Netfilter tests have been moved to a subdir under selftests/net by patch series [1]. Fix the path in selftests/Makefile accordingly. This helps fix the following error: tools/testing/selftests$ make ... make[1]: Entering directory 'tools/testing/selftests' make[1]: *** netfilter: No such file or directory. Stop. make[1]: Leaving directory 'tools/testing/selftests' [1] https://lore.kernel.org/all/20240411233624.8129-1-fw@strlen.de/Reported-by:Yujie Liu <yujie.liu@intel.com> Signed-off-by:
-
Arınç ÜNAL authored
The mediatek-ge PHY driver already disables EEE advertisement on the switch PHYs but my testing [1] shows that it is somehow enabled afterwards. Disabling EEE advertisement before the PHY driver initialises keeps it off. Therefore, remove disabling EEE advertisement here as it's useless. Link: https://lore.kernel.org/netdev/d286ea27-e911-4dcb-9037-b75f22b437b8@arinc9.com/ [1] Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
-
Kory Maincent (Dent Project) authored
In commit 18ff0bcd ("ethtool: add interface to interact with Ethernet Power Equipment"), the 'pse_control_config' structure was introduced, housing a single member labeled 'admin_cotrol' responsible for maintaining the operational state of the PoDL PSE functions. A noticeable typographical error exists in the naming of this field ('cotrol' should be corrected to 'control'), which this commit aims to rectify. Furthermore, with upcoming extensions of this structure to encompass PoE functionalities, the field is being renamed to 'podl_admin_state' to distinctly indicate that this state is tailored specifically for PoDL." Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.comSigned-off-by:
-
Kory Maincent (Dent Project) authored
This allows fw_devlink to create device links between consumers of a PSE and the supplier of the PSE. Reviewed-by:
-
Kory Maincent (Dent Project) authored
Oleksij was the first to add support for pse-pd net subsystem. Add himself to the maintainers seems logical. Acked-by:
-
Jakub Kicinski authored
Real driver testing will obviously require enabling more options, but will require more manual setup in the first place. For CIs running purely software tests we need to enable netdevsim. Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240416004556.1618804-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
ping prints all the info to stdout. To make debug easier capture stdout in the Exception raised when command unexpectedly fails. Reviewed-by:
-
Florian Westphal authored
kmemleak reports net_device resources are no longer released, restore needs_free_netdev toggle. Sample backtrace: unreferenced object 0xffff88810874f000 (size 4096): [..] [<00000000a2b8af8b>] __kmalloc_node+0x209/0x290 [<0000000040b0a1a9>] alloc_netdev_mqs+0x58/0x470 [<00000000b4be1e78>] vti6_init_net+0x94/0x230 [<000000008830c1ea>] ops_init+0x32/0xc0 [<000000006a26fa8f>] setup_net+0x134/0x2e0 [..] Cc: Breno Leitao <leitao@debian.org> Fixes: a9b2d55a ("ip6_vti: Do not use custom stat allocator") Signed-off-by:Florian Westphal <fw@strlen.de> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240415122346.26503-1-fw@strlen.deSigned-off-by:
-
Peng Fan authored
Allow nvmem-cells and nvmem-cell-names to get mac_address from onchip fuse. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Frank Li <Frank.Li@nxp.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240415103621.1644735-1-peng.fan@oss.nxp.comSigned-off-by:
-
Jiapeng Chong authored
The print function dev_err() is redundant because platform_get_irq_byname() already prints an error. ./drivers/net/ipa/ipa_interrupt.c:300:2-9: line 300 is redundant because platform_get_irq() already prints an error. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8756Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
-
Colin Ian King authored
The variable is being assigned an value and then is being re-assigned a new value in the next statement. The assignment is redundant and can be removed. Cleans up clang scan build warning: net/handshake/tlshd.c:216:2: warning: Value stored to 'ret' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Acked-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20240415100713.483399-1-colin.i.king@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
The ID table already has respective entry and MODULE_DEVICE_TABLE and creates proper alias for SPI driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240414154929.127045-1-krzk@kernel.orgSigned-off-by:
-
- 16 Apr, 2024 18 commits
-
-
Kuniyuki Iwashima authored
Commit dcf70df2 ("af_unix: Fix up unix_edge.successor for embryo socket.") added spin_lock(&unix_gc_lock) in accept() path, and it caused regression in a stress test as reported by kernel test robot. If the embryo socket is not part of the inflight graph, we need not hold the lock. To decide that in O(1) time and avoid the regression in the normal use case, 1. add a new stat unix_sk(sk)->scm_stat.nr_unix_fds 2. count the number of inflight AF_UNIX sockets in the receive queue under unix_state_lock() 3. move unix_update_edges() call under unix_state_lock() 4. avoid locking if nr_unix_fds is 0 in unix_update_edges() Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404101427.92a08551-oliver.sang@intel.comSigned-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240413021928.20946-1-kuniyu@amazon.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queuePaolo Abeni authored
Tony Nguyen says: ==================== This series contains updates to ice driver only. Lukasz removes unnecessary argument from ice_fdir_comp_rules(). Jakub adds support for ethtool 'ether' flow-type rules. Jake moves setting of VF MSI-X value to initialization function and adds tracking of VF relative MSI-X index. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: store VF relative MSI-X index in q_vector->vf_reg_idx ice: set vf->num_msix in ice_initialize_vf_entry() ice: Implement 'flow-type ether' rules ice: Remove unnecessary argument from ice_fdir_comp_rules() ==================== Link: https://lore.kernel.org/r/20240412210534.916756-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Paolo Abeni authored
Petr Machata says: ==================== selftests: Assortment of fixes This is a loose follow-up to the Kernel CI patchset posted recently. It contains various fixes that were supposed to be part of said patchset, but didn't fit due to its size. The latter 4 patches were written independently of the CI effort, but again didn't fit in their intended patchsets. - Patch #1 unifies code of two very similar looking functions, busywait() and slowwait(). - Patch #2 adds sanity checks around the setting of NETIFS, which carries list of interfaces to run on. - Patch #3 changes bail_on_lldpad() to SKIP instead of FAILing. - Patches #4 to #7 fix issues in selftests. - Patches #8 to #10 add topology diagrams to several selftests. This should have been part of the mlxsw leg of NH group stats patches, but again, it did not fit in due to size. ==================== Link: https://lore.kernel.org/r/cover.1712940759.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
This test lacks a topology diagram, making the setup not obvious. Add one. Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Petr Machata authored
This test lacks a topology diagram, making the setup not obvious. Add one. Signed-off-by:
-
Petr Machata authored
This test lacks a topology diagram, making the setup not obvious. Add one. Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Danielle Ratson authored
The ethtool dump includes the lanes parameter only when the port is up. Therefore, the ethtool_lanes.sh test waits for ports to come before testing the lanes parameter. In some cases, the test considers the port as up, but the lanes parameter is not yet dumped although assumed to be, resulting in ethtool_lanes.sh test failure. To avoid that, ensure that the lanes parameter is indeed dumped by waiting for it explicitly, before preforming the test cases. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
-
Petr Machata authored
The tests use the constant TC_HIT_TIMEOUT when waiting on the counter values. However it does not include tc_common.sh where the counter is specified. The test has been robust in our testing, which means the counter is bumped quickly enough that the updated value is available already on the first iteration. Nevertheless it's not correct. Include tc_common.sh as appropriate. Signed-off-by:
-
Petr Machata authored
Some log_test calls are done in a loop, and lead to the same log output. This might prove tricky to deduplicate for automated tools. Instead, roll the unique information from log_info to log_test, and drop the log_info. This also leads to more compact and clearer output. This change prompts rewording the messages so that they are not excessively long. Some check_err messages do not indicate what the issue actually is, so reword them to say it's a "ping with", like is the case in some other instances in this test. Signed-off-by:
-
Petr Machata authored
When rx-pktsNtoM reports a range that involves very low-valued range, such as 0-64, the calculated length of the packet will be -4, because FCS is subtracted from the value. mausezahn then confuses the value for an option and bails out. As a result, the test dumps many mausezahn error messages. Instead, cap the value at 0. mausezahn will use an appropriate minimum packet length. Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
-
Petr Machata authored
$ksft_skip is used to mark selftests that have tooling issues. The fact that LLDPad is running, but shouldn't, is one such issue. Therefore have bail_on_lldpad() bail with $ksft_skip. Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by:
-
Petr Machata authored
The variable should contain at least NUM_NETIFS interfaces, stored as keys named "p$i", for i in `seq $NUM_NETIFS`. Signed-off-by:
-
Petr Machata authored
Bodies of busywait() and slowwait() functions are almost identical. Extract the common code into a helper, loopy_wait, and convert busywait() and slowwait() into trivial wrappers. Moreover, the fact that slowwait() uses seconds for units is really not intuitive, and the comment does not help much. Instead make the unit part of the name of the argument to further clarify what units are expected. Cc: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Russell King (Oracle) authored
Convert mt753x to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by:
-
Russell King (Oracle) authored
Convert lantiq_gswip to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. For lantiq_gswip, it means we end up with a common instance of phylink MAC operations that are shared between the different variants, rather than having duplicated initialisers in dsa_switch_ops. Signed-off-by:
-
Russell King (Oracle) authored
Convert qca8k to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/E1rvIce-006bQi-58@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Convert ar9331 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. Signed-off-by:
-
Russell King (Oracle) authored
Convert sja1105 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c Signed-off-by:
-
- 15 Apr, 2024 6 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== selftests: net: exercise page pool reporting via netlink Add a basic test for page pool netlink reporting. v1: https://lore.kernel.org/all/20240411012815.174400-1-kuba@kernel.org/ ==================== Link: https://lore.kernel.org/r/20240412141436.828666-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Add a Python test for the basic ops. # ./net/nl_netdev.py KTAP version 1 1..3 ok 1 nl_netdev.empty_check ok 2 nl_netdev.lo_check ok 3 nl_netdev.page_pool_check # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Reviewed-by:
-
Jakub Kicinski authored
Using "with" on an entire driver test env is supported already, but it's also useful to use "with" on an individual nsim. Reviewed-by:
-
Jakub Kicinski authored
Instead of a summary line print the full exception. This makes debugging Python tests much easier. Reviewed-by:
-
Jakub Kicinski authored
Developing Python tests is a bit annoying because when test fails we only print the fail message and no info about which exact check led to it. Print the location (the first line of this example is new): # At /root/ksft-net-drv/./net/nl_netdev.py line 38: # Check failed 0 != 10 not ok 3 nl_netdev.page_pool_check Reviewed-by:
-
Jakub Kicinski authored
YNL currently reports None for empty dump: $ cli.py ...netdev.yaml --dump page-pool-get None This doesn't matter for the CLI but when writing YNL based tests having to deal with either list or None is annoying. Limit the None conversion to non-dump ops: $ cli.py ...netdev.yaml --dump page-pool-get [] Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.orgSigned-off-by:
-
