- 06 Dec, 2023 6 commits
-
-
Chester Lin authored
I am leaving SUSE so the current email address <clin@suse.com> will be disabled soon. <chester62515@gmail.com> will be my new address for handling emails, patches and pull requests from upstream and communities. Cc: Chester Lin <chester62515@gmail.com> Cc: NXP S32 Linux Team <s32@nxp.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Andreas Färber <afaerber@suse.de> Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Chester Lin <clin@suse.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Link: https://lore.kernel.org/r/20231115234508.11510-1-clin@suse.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 6.7, please pull the following: - Stefan corrects the disabling of the activity LED for the Raspberry Pi 400 * tag 'arm-soc/for-6.7/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act Link: https://lore.kernel.org/r/20231205225021.653045-1-florian.fainelli@broadcom.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'scmi-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fixes for v6.7 A fix for possible truncation/overflow in the frequency computations as both the performance value and the multiplier are 32bit values. * tag 'scmi-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode firmware: arm_scmi: Fix frequency truncation by promoting multiplier type Link: https://lore.kernel.org/r/20231204134724.30465-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'riscv-dt-fixes-for-v6.7-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.7-rc4 Two fixes, both rather minor. The first fixes some dtbs_check warnings introduced after an update to the bindings, that returns the architecture to being clean of dtbs_check issues. The second relocates a soc-specific property to the appropriate location in $soc.dtsi, and hopefully avoids the same mistake being copy-pasted into more devicetrees. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.7-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: move timebase-frequency to mpfs.dtsi riscv: dts: sophgo: remove address-cells from intc node Link: https://lore.kernel.org/r/20231130-maternity-majestic-dd29f0170050@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'mtk-dts64-fixes-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/fixes MediaTek ARM64 DeviceTree fixes for v6.7 Fixes for various MediaTek SoCs, including MT7986: - eMMC HS400 mode failures - Cooling trips for emergency system shutdown - BPI-R3 machine SFP power limit and active cooling MT8173: - EVB device tree unit_address_vs_reg warning MT8183: - unit_address_vs_reg and simple_bus_reg warnings - Kukui device tree nodes naming consistency and adhering to bindings - Jacuzzi device tree unnecessary cells removed as those were producing avoid_unnecessary_addr_size MT8186: - Power domains faults due to incorrect clocks - GPU speed bin nvmem cell name was wrong, producing issues with interpreting the speedbin with GPU OPPs MT8195: - Local Arbiter (and whole system) ability to suspend - Cherry device tree interrupts_property warning ...and another unit_address_vs_reg warning on MT7622. * tag 'mtk-dts64-fixes-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7 arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties arm64: dts: mediatek: mt7622: fix memory node warning check arm64: dts: mediatek: mt8186: fix clock names for power domains arm64: dts: mediatek: mt8186: Change gpu speedbin nvmem cell name arm64: dts: mt7986: change cooling trips arm64: dts: mt7986: define 3W max power to both SFP on BPI-R3 arm64: dts: mt7986: fix emmc hs400 mode without uboot initialization arm64: dts: mt8183: kukui: Fix underscores in node names arm64: dts: mediatek: mt8183: Move thermal-zones to the root node arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks Link: https://lore.kernel.org/r/20231129113905.134732-1-angelogioacchino.delregno@collabora.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'optee-supplicant-fix-for-v6.7' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes OP-TEE fix for supplicant based device enumeration Adds a sysfs attribute for devices depending on supplicant services so that the user-space service can detect and detach those devices before closing the supplicant * tag 'optee-supplicant-fix-for-v6.7' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix supplicant based device enumeration Link: https://lore.kernel.org/r/20231114153113.GA1310615@raydenSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 04 Dec, 2023 2 commits
-
-
Sudeep Holla authored
The multiplier is already promoted to unsigned long, however the frequency calculations done when using level indexing mode doesn't use the multiplier computed. It instead hardcodes the multiplier value of 1000 at all the usage sites. Clean that up by assigning the multiplier value of 1000 when using the perf level indexing mode and update the frequency calculations to use the multiplier instead. It should fix the possible frequency truncation for all the values greater than or equal to 4GHz on 64-bit machines. Fixes: 31c7c139 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.comReviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
Sudeep Holla authored
Fix the possible frequency truncation for all values equal to or greater 4GHz on 64bit machines by updating the multiplier 'mult_factor' to 'unsigned long' type. It is also possible that the multiplier itself can be greater than or equal to 2^32. So we need to also fix the equation computing the value of the multiplier. Fixes: a9e3fbfa ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.comSigned-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
- 29 Nov, 2023 15 commits
-
-
AngeloGioacchino Del Regno authored
Change interrupt cells to 2 to suppress interrupts_property warning. Cc: stable@vger.kernel.org Fixes: 0de0fe95 ("arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7") Link: https://lore.kernel.org/r/20231127132026.165027-1-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Eugen Hristev authored
dtbs_check throws a warning at the dsi node: Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Other DTS have a panel child node with a reg, so the parent dtsi must have the address-cells and size-cells, however this specific DT has the panel removed, but not the cells, hence the warning above. If panel is deleted then the cells must also be deleted since they are tied together, as the child node in this DT does not have a reg. Cc: stable@vger.kernel.org Fixes: cabc71b0 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Eugen Hristev authored
dtbs_check throws a warning at the memory node: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name fix by adding the address into the node name. Cc: stable@vger.kernel.org Fixes: 0b6286dd ("arm64: dts: mt7622: add bananapi BPI-R64 board") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Eugen Hristev authored
Clocks for each power domain are split into big categories: pd clocks and subsys clocks. According to the binding, all clocks which have a dash '-' in their name are treated as subsys clocks, and must be placed at the end of the list. The other clocks which are pd clocks must come first. Fixed the naming and the placing of all clocks in the power domains. For the avoidance of doubt, prefixed all subsys clocks with the 'subsys' prefix. The binding does not enforce strict clock names, the driver uses them in bulk, only making a difference for pd clocks vs subsys clocks. The above problem appears to be trivial, however, it leads to incorrect power up and power down sequence of the power domains, because some clocks will be mistakenly taken for subsys clocks and viceversa. One consequence is the fact that if the DIS power domain goes power down and power back up during the boot process, when it comes back up, there are still transactions left on the bus which makes the display inoperable. Some of the clocks for the DIS power domain were wrongly using '_' instead of '-', which again made these clocks being treated as pd clocks instead of subsys clocks. Cc: stable@vger.kernel.org Fixes: d9e43c1e ("arm64: dts: mt8186: Add power domains controller") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
MT8186's GPU speedbin value must be interpreted, or the value will not be meaningful. Use the correct "gpu-speedbin" nvmem cell name for the GPU speedbin to allow triggering the cell info fixup handler, hence feeding the right speedbin number to the users. Cc: stable@vger.kernel.org Fixes: 263d2fd0 ("arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells") Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20231005151150.355536-1-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Frank Wunderlich authored
Add Critical and hot trips for emergency system shutdown and limiting system load. Change passive trip to active to make sure fan is activated on the lowest trip. Cc: stable@vger.kernel.org Fixes: 1f5be051 ("arm64: dts: mt7986: add thermal-zones") Fixes: c26f779a ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts") Suggested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231025170832.78727-4-linux@fw-web.deSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Frank Wunderlich authored
All SFP power supplies are connected to the system VDD33 which is 3v3/8A. Set 3A per SFP slot to allow SFPs work which need more power than the default 1W. Cc: stable@vger.kernel.org Fixes: 8e01fb15 ("arm64: dts: mt7986: add Bananapi R3") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231025170832.78727-3-linux@fw-web.deSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Eric Woudstra authored
Eric reports errors on emmc with hs400 mode when booting linux on bpi-r3 without uboot [1]. Booting with uboot does not show this because clocks seem to be initialized by uboot. Fix this by adding assigned-clocks and assigned-clock-parents like it's done in uboot [2]. [1] https://forum.banana-pi.org/t/bpi-r3-kernel-fails-setting-emmc-clock-to-416m-depends-on-u-boot/15170 [2] https://github.com/u-boot/u-boot/blob/master/arch/arm/dts/mt7986.dtsi#L287 Cc: stable@vger.kernel.org Fixes: 513b49d1 ("arm64: dts: mt7986: add mmc related device nodes") Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231025170832.78727-2-linux@fw-web.deSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Hsin-Yi Wang authored
Replace underscores with hyphens in pinctrl node names both for consistency and to adhere to the bindings. Cc: stable@vger.kernel.org Fixes: cd894e27 ("arm64: dts: mt8183: Add krane-sku176 board") Fixes: 1652dbf7 ("arm64: dts: mt8183: add scp node") Fixes: 27eaf34d ("arm64: dts: mt8183: config dsi node") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.orgSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
The thermal zones are not a soc bus device: move it to the root node to solve simple_bus_reg warnings. Cc: stable@vger.kernel.org Fixes: b325ce39 ("arm64: dts: mt8183: add thermal zone node") Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0 and regulator-usb-p1. Cc: stable@vger.kernel.org Fixes: c0891284 ("arm64: dts: mediatek: add USB3 DRD driver") Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
The NTC is defined as ntc@0 but it doesn't need any address at all. Fix the unit_address_vs_reg warning by dropping the unit address: since the node name has to be generic also fully rename it from ntc@0 to thermal-sensor. Cc: stable@vger.kernel.org Fixes: ff9ea5c6 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor") Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
The reserved memory for scp had node name "scp_mem_region" and also without unit-address: change the name to "memory@(address)". This fixes a unit_address_vs_reg warning. Cc: stable@vger.kernel.org Fixes: 1652dbf7 ("arm64: dts: mt8183: add scp node") Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
Before suspending the LARBs we're making sure that any operation is done: this never happens because we are unexpectedly unclocking the LARB20 before executing the suspend handler for the MediaTek Smart Multimedia Interface (SMI) and the cause of this is incorrect clocks on this LARB. Fix this issue by changing the Local Arbiter 20 (used by the video encoder secondary core) apb clock to CLK_VENC_CORE1_VENC; furthermore, in order to make sure that both the PM resume and video encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to the VENC (main core) and VENC_CORE1 power domains, as this IP cannot communicate with the rest of the system (the AP) without local arbiter clocks being operational. Cc: stable@vger.kernel.org Fixes: 3b5838d1 ("arm64: dts: mt8195: Add iommu and smi nodes") Fixes: 2b515194 ("arm64: dts: mt8195: Add power domains controller") Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
Stefan Wahren authored
The LED ACT which is included from bcm2711-rpi-4-b doesn't exists on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to use the delete-node directive in order to remove the complete node. Unfortunately the usage get broken in commit 1156e3a7 ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") and now ACT and PWR LED using the same GPIO and this prevent probing of led-gpios on Raspberry Pi 400: leds-gpio: probe of leds failed with error -16 So fix the delete-node directive. Fixes: 1156e3a7 ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231118124252.14838-3-wahrenst@gmx.netSigned-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
-
- 27 Nov, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt:: "Eventfs fixes: - With the usage of simple_recursive_remove() recommended by Al Viro, the code should not be calling "d_invalidate()" itself. Doing so is causing crashes. The code was calling d_invalidate() on the race of trying to look up a file while the parent was being deleted. This was detected, and the added dentry was having d_invalidate() called on it, but the deletion of the directory was also calling d_invalidate() on that same dentry. - A fix to not free the eventfs_inode (ei) until the last dput() was called on its ei->dentry made the ei->dentry exist even after it was marked for free by setting the ei->is_freed. But code elsewhere still was checking if ei->dentry was NULL if ei->is_freed is set and would trigger WARN_ON if that was the case. That's no longer true and there should not be any warnings when it is true. - Use GFP_NOFS for allocations done under eventfs_mutex. The eventfs_mutex can be taken on file system reclaim, make sure that allocations done under that mutex do not trigger file system reclaim. - Clean up code by moving the taking of inode_lock out of the helper functions and into where they are needed, and not use the parameter to know to take it or not. It must always be held but some callers of the helper function have it taken when they were called. - Warn if the inode_lock is not held in the helper functions. - Warn if eventfs_start_creating() is called without a parent. As eventfs is underneath tracefs, all files created will have a parent (the top one will have a tracefs parent). Tracing update: - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem" * tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer eventfs: Make sure that parent->d_inode is locked in creating files/dirs eventfs: Do not allow NULL parent to eventfs_start_creating() eventfs: Move taking of inode_lock into dcache_dir_open_wrapper() eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held eventfs: Do not invalidate dentry in create_file/dir_dentry() eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
-
- 26 Nov, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: "This patchset fixes and enforces correct section alignments for the ex_table, altinstructions, parisc_unwind, jump_table and bug_table which are created by inline assembly. Due to not being correctly aligned at link & load time they can trigger unnecessarily the kernel unaligned exception handler at runtime. While at it, I switched the bug table to use relative addresses which reduces the size of the table by half on 64-bit. We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs from HP-UX, which now trigger build-issues with glibc. We can simply remove them. Most of the patches are tagged for stable kernel series. Summary: - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc build issues - Fix section alignments for ex_table, altinstructions, parisc unwind table, jump_table and bug_table - Reduce size of bug_table on 64-bit kernel by using relative pointers" * tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce size of the bug_table on 64-bit kernel by half parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes parisc: Use natural CPU alignment for bug_table parisc: Ensure 32-bit alignment on parisc unwind section parisc: Mark lock_aligned variables 16-byte aligned on SMP parisc: Mark jump_table naturally aligned parisc: Mark altinstructions read-only and 32-bit aligned parisc: Mark ex_table entries 32-bit aligned in uaccess.h parisc: Mark ex_table entries 32-bit aligned in assembly.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode fixes from Ingo Molnar: "Fix/enhance x86 microcode version reporting: fix the bootup log spam, and remove the driver version announcement to avoid version confusion when distros backport fixes" * tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Rework early revisions reporting x86/microcode: Remove the driver announcement and version
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf event fix from Ingo Molnar: "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration code resulting in non-working events on those platforms" * tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fix lockdep block chain corruption resulting in KASAN warnings" * tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix block chain corruption
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - use after free fix in releasing multichannel interfaces - fixes for special file types (report char, block, FIFOs properly when created e.g. by NFS to Windows) - fixes for reporting various special file types and symlinks properly when using SMB1 * tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: introduce cifs_sfu_make_node() smb: client: set correct file type from NFS reparse points smb: client: introduce ->parse_reparse_point() smb: client: implement ->query_reparse_point() for SMB1 cifs: fix use after free for iface while disabling secondary channels
-
Conor Dooley authored
The timebase-frequency on PolarFire SoC is not set by an oscillator on the board, but rather by an internal divider, so move the property to mpfs.dtsi. This looks to be copy-pasta from the SiFive Unleashed as the comments in both places were almost identical. In the Unleashed's case this looks to actually be valid, as the clock is provided by a crystal on the PCB. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- CC: Conor Dooley <conor.dooley@microchip.com> CC: Daire McNamara <daire.mcnamara@microchip.com> CC: Rob Herring <robh+dt@kernel.org> CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> CC: Paul Walmsley <paul.walmsley@sifive.com> CC: Palmer Dabbelt <palmer@dabbelt.com> CC: linux-riscv@lists.infradead.org CC: devicetree@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / PHY / Thunderbolt fixes from Greg KH: "Here are a number of reverts, fixes, and new device ids for 6.7-rc3 for the USB, PHY, and Thunderbolt driver subsystems. Include in here are: - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't have been merged yet, the author is reworking them based on review comments as they were using older apis that shouldn't be used anymore for newer drivers - small thunderbolt driver fixes for reported issues - USB driver fixes for a variety of small issues in dwc3, typec, xhci, and other smaller drivers. - new device ids for usb-serial and onboard_usb_hub drivers. All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: serial: option: add Luat Air72*U series products USB: dwc3: qcom: fix ACPI platform device leak USB: dwc3: qcom: fix software node leak on probe errors USB: dwc3: qcom: fix resource leaks on probe deferral USB: dwc3: qcom: simplify wakeup interrupt setup USB: dwc3: qcom: fix wakeup after probe deferral dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types usb: misc: onboard-hub: add support for Microchip USB5744 dt-bindings: usb: microchip,usb5744: Add second supply usb: misc: ljca: Fix enumeration error on Dell Latitude 9420 USB: serial: option: add Fibocom L7xx modules USB: xhci-plat: fix legacy PHY double init usb: typec: tipd: Supply also I2C driver data usb: xhci-mtk: fix in-ep's start-split check failure usb: dwc3: set the dma max_seg_size usb: config: fix iteration issue in 'usb_get_bos_descriptor()' usb: dwc3: add missing of_node_put and platform_device_put USB: dwc2: write HCINT with INTMASK applied usb: misc: ljca: Drop _ADR support to get ljca children devices usb: cdnsp: Fix deadlock issue during using NCM gadget ...
-
- 25 Nov, 2023 8 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Chandan Babu: - Validate quota records recovered from the log before writing them to the disk. * tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: dquot recovery does not validate the recovered dquot xfs: clean up dqblk extraction
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix "rodata=on" not disabling "rodata=full" on arm64 - Add arm64 make dependency between vmlinuz.efi and Image, leading to occasional build failures previously (with parallel building) - Add newline to the output formatting of the za-fork kselftest * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: add dependency between vmlinuz.efi and Image kselftest/arm64: Fix output formatting for za-fork arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - A small cleanup patch for the Xen privcmd driver - A fix for the swiotlb-xen driver which was missing the advertising of the maximum mapping length - A fix for Xen on Arm for a longstanding bug, which happened to occur only recently: a structure in percpu memory crossed a page boundary, which was rejected by the hypervisor * tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: fix xen_vcpu_info allocation alignment xen: privcmd: Replace zero-length array with flex-array member and use __counted_by swiotlb-xen: provide the "max_mapping_size" method
-
Helge Deller authored
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative offsets to the bug address and the source file name instead of 64-bit absolute addresses. This effectively reduces the size of the bug_table[] array by half on 64-bit kernels. Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org
-
Helge Deller authored
Make sure that the __bug_table section gets 32- or 64-bit aligned, depending if a 32- or 64-bit kernel is being built. Mark it non-writeable and use .blockz instead of the .org assembler directive to pad the struct. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
-
Helge Deller authored
Make sure the .PARISC.unwind section will be 32-bit aligned. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
-
Helge Deller authored
On parisc we need 16-byte alignment for variables which are used for locking. Mark the __lock_aligned attribute acordingly so that the .data..lock_aligned section will get that alignment in the generated object files. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
-