- 03 Sep, 2013 26 commits
-
-
Jan Vesely authored
Signed-off-by:
Jan Vesely <jvesely@redhat.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jan Vesely authored
Signed-off-by:
-
Rasesh Mody authored
This patch updates the firmware to address the thermal notification issue Signed-off-by:
Rasesh Mody <rmody@brocade.com> Signed-off-by:
-
Bradley Grove authored
This is a new driver for ATTO Technology's ExpressSAS series of hardware RAID adapters. It supports the following adapters: - ExpressSAS R60F - ExpressSAS R680 - ExpressSAS R608 - ExpressSAS R644 Signed-off-by:Bradley Grove <bgrove@attotech.com> Signed-off-by:
-
Dan Carpenter authored
Smatch complains that the reg_IRQ[] array only has MAXIRQ (16) elements so we are one space beyond the end of the array here. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
Return error from function qla4_8xxx_collect_md_data() if minidump data collection fails. Signed-off-by:
-
Santosh Vernekar authored
Signed-off-by:
Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by:
-
Santosh Vernekar authored
Add pex-dma support for ISP8324 and ISP8042 to improve the minidump capture time. Signed-off-by:
-
Steffen Maier authored
Enabling the data router support by default can increase performance in certain situations. It is safe to do so and tolerated in LPAR and under z/VM in case there is no data router support in that environment. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
-
Martin Peschke authored
Get rid of unused function zfcp_fsf_get_req and corresponding prototype definition. Commit a54ca0f6 in v2.6.28 "[SCSI] zfcp: Redesign of the debug tracing for HBA records." accidentally introduced this code which was dead in the first place. Signed-off-by:
-
Martin Peschke authored
strict_strtoul and friends are obsolete. Use kstrtoul functions instead. Signed-off-by:
-
Martin Peschke authored
minor cleanup for status read request Signed-off-by:
-
Sreekanth Reddy authored
Added a driver module parameter max_msix_vectors. Using this module parameter the maximum number of MSI-X vectors could be set. The number of MSI-X vectors used would be the minimum of MSI-X vectors supported by the HBA, the number of CPU cores and the value set to max_msix_vectors module parameter. The default value of this module parameter is set to 8. The default value of this parameter is set to 8 inorder to reduce the amount of memory required for Reply Descriptor Post queue. This is because with the higher MSI-X vectors, some times kernel is not able to allocate the requested amount of memory and crash is observed. To overcome this problem, the default value is set to 8. Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Nilesh Javali authored
While loopback diagnostic is in progress, disable the ACB which resets all the active connections to target. Disable ACB would filter out all the DHCP multicast and broadcast packets which otherwise cause the diagnostic test to take longer time to complete or failures in some other cases. Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Sreekanth Reddy authored
Signed-off-by:
-
Sreekanth Reddy authored
[SCSI] mpt2sas: Fix for kernel panic when driver loads with HBA connected to non LUN 0 configured expander With some enclosures when LUN 0 is not created but LUN 1 or LUN X is created then SCSI scan procedure calls target_alloc, slave_alloc call back functions for LUN 0 and slave_destory() for same LUN 0. In these kind of cases within slave_destroy, pointer to scsi_target in _sas_device structure is set to NULL, following which when slave_alloc for LUN 1 is called then starget would not be set properly for this LUN. So, scsi_target pointer pointing to NULL value would lead to a crash later in the discovery procedure. To solve this issue set the sas_device's scsi_target pointer to scsi_device's scsi_target if it is NULL earlier in slave_alloc callback function. Signed-off-by:
-
Sreekanth Reddy authored
[SCSI] mpt2sas: when Async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed When Async scanning mode is enabled and device scanning is in progress then devices should not be removed. But in actuality, devices are removed but their transport layer entries are not removed. This causes error to add the same device to the transport layer after host reset or diagnostic reset. So, in this patch, modified the code in such a way that device is not removed when Async scanning mode is enabled and device scanning is in progress. Signed-off-by:
-
Sreekanth Reddy authored
Infinite loop can occur if IOCStatus is not equal to MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions _scsih_search_responding_sas_devices, _scsih_search_responding_raid_devices and _scsih_search_responding_expanders So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value, in this patch code is modified to check for IOCStatus not equals to MPI2_IOCSTATUS_SUCCESS to break the while loop. Signed-off-by:
-
Sreekanth Reddy authored
The copyright in driver sources is updated for the year 2013. Signed-off-by:
-
Sreekanth Reddy authored
Change set in MPI2 Rev x specification and 2.00.26 header files 1. Added two new AbortType values for TargetModeAbort Request: one to abort all IOs from a single initiator and other to abort only Command IUs. 2. Added Use Slot Information during Port Enable Event Reply flag to the Flags field of Manufacturing Page 7. 3. Added OEM Identifier to BiosOptions bits of BIOS Page 1. Signed-off-by:
-
Sreekanth Reddy authored
The intent of this patch is to perform a graceful shutdown of target drives even if volume doesn't exits. Changes done in this patch 1. Removed the check for the presence of volumes before sending down MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED. Therefore, this RAID action would be sent if the card is IR Firmware. 2. The MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED is sent even when the system undergoes suspend (in addition to remove/shutdown which was already present) Signed-off-by:
-
Sreekanth Reddy authored
Added a check to identify if mpi_reply is NULL in mpt2sas_ctl_event_callback() and return without proceeding if it is the case. Also modified the following functions to return void instead of 0 or 1 as returning those values from events perspective doesn't make sense. * _base_async_event() * mpt2sas_ctl_event_callback() * mpt2sas_scsih_event_callback() Signed-off-by:
-
- 26 Aug, 2013 14 commits
-
-
John Kacur authored
section Signed-off-by: John Kacur <jkacur@redhat.com> On a 3.6-rt (real-time patch) kernel we are seeing the following BUG However, it appears to be relevant for non-realtime (mainline) as well. [ 49.688847] hpsa 0000:03:00.0: hpsa0: <0x323a> at IRQ 67 using DAC [ 49.749928] scsi0 : hpsa [ 49.784437] BUG: using smp_processor_id() in preemptible [00000000 00000000] code: kworker/u:0/6 [ 49.784465] caller is enqueue_cmd_and_start_io+0x5a/0x100 [hpsa] [ 49.784468] Pid: 6, comm: kworker/u:0 Not tainted 3.6.11.5-rt37.52.el6rt.x86_64.debug #1 [ 49.784471] Call Trace: [ 49.784512] [<ffffffff812abe83>] debug_smp_processor_id+0x123/0x150 [ 49.784520] [<ffffffffa009043a>] enqueue_cmd_and_start_io+0x5a/0x100 [hpsa] [ 49.784529] [<ffffffffa00905cb>] hpsa_scsi_do_simple_cmd_core+0xeb/0x110 [hpsa] [ 49.784537] [<ffffffff812b09c8>] ? swiotlb_dma_mapping_error+0x18/0x30 [ 49.784544] [<ffffffff812b09c8>] ? swiotlb_dma_mapping_error+0x18/0x30 [ 49.784553] [<ffffffffa0090701>] hpsa_scsi_do_simple_cmd_with_retry+0x91/0x280 [hpsa] [ 49.784562] [<ffffffffa0093558>] hpsa_scsi_do_report_luns.clone.2+0xd8/0x130 [hpsa] [ 49.784571] [<ffffffffa00935ea>] hpsa_gather_lun_info.clone.3+0x3a/0x1a0 [hpsa] [ 49.784580] [<ffffffffa00963df>] hpsa_update_scsi_devices+0x11f/0x4f0 [hpsa] [ 49.784592] [<ffffffff81592019>] ? sub_preempt_count+0xa9/0xe0 [ 49.784601] [<ffffffffa00968ad>] hpsa_scan_start+0xfd/0x150 [hpsa] [ 49.784613] [<ffffffff8158cba8>] ? rt_spin_lock_slowunlock+0x78/0x90 [ 49.784626] [<ffffffff813b04d7>] do_scsi_scan_host+0x37/0xa0 [ 49.784632] [<ffffffff813b05da>] do_scan_async+0x1a/0x30 [ 49.784643] [<ffffffff8107c4ab>] async_run_entry_fn+0x9b/0x1d0 [ 49.784655] [<ffffffff8106ae92>] process_one_work+0x1f2/0x620 [ 49.784661] [<ffffffff8106ae20>] ? process_one_work+0x180/0x620 [ 49.784668] [<ffffffff8106d4fe>] ? worker_thread+0x5e/0x3a0 [ 49.784674] [<ffffffff8107c410>] ? async_schedule+0x20/0x20 [ 49.784681] [<ffffffff8106d5d3>] worker_thread+0x133/0x3a0 [ 49.784688] [<ffffffff8106d4a0>] ? manage_workers+0x190/0x190 [ 49.784696] [<ffffffff81073236>] kthread+0xa6/0xb0 [ 49.784707] [<ffffffff815970a4>] kernel_thread_helper+0x4/0x10 [ 49.784715] [<ffffffff81082a7c>] ? finish_task_switch+0x8c/0x110 [ 49.784721] [<ffffffff8158e44b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 49.784727] [<ffffffff8158e85d>] ? retint_restore_args+0xe/0xe [ 49.784734] [<ffffffff81073190>] ? kthreadd+0x1e0/0x1e0 [ 49.784739] [<ffffffff815970a0>] ? gs_change+0xb/0xb ------------------- This is caused by enqueue_cmd_and_start_io()-> set_performant_mode()-> smp_processor_id() Which if you have debugging enabled calls debug_processor_id() and triggers the warning. The code here is c->Header.ReplyQueue = smp_processor_id() % h->nreply_queues; Since it is not critical that the code complete on the same processor, but the cpu is a hint used in generating the ReplyQueue and will still work if the cpu migrates or is preempted, it is safe to use the raw_smp_processor_id() to surpress the false positve warning. Signed-off-by:John Kacur <jkacur@redhat.com> Acked-by:
Stephen Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Or Gerlitz authored
To run discovery over iSER we need to advertize the CAP_TEXT_NEGO capability towards user space. Also need to make sure the login RX buffer is posted when SendTargets TEXT PDUs are sent. For that end, we use a setting of the ISCSI_PARAM_DISCOVERY_SESS iscsi param as an indication that this is discovery session. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Acked-by:
lindar_liu <lindar_liu@usish.com> Signed-off-by:
-
Anand Kumar Santhanam authored
Signed-off-by: Anandkumar.Santhanam@pmcs.com Signed-off-by: -
Joe Lawrence authored
If mpt3sas_base_map_resources takes an early error path then its counterpart, mpt3sas_base_free_resources needs to be careful about cleaning up: 1 - _base_mask_interrupts and _base_make_ioc_ready require memory mapped I/O registers, make sure that this is true. 2 - _base_free_irq iterates over the adapter's reply_queue_list, so move this list head initialization out of _base_enable_msix to _scsih_probe so this will always be safe. 3 - check that the controller PCI device and its BARs have been enabled before disabling them. Signed-off-by:Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
-
Joe Lawrence authored
If mpt2sas_base_map_resources takes an early error path then its counterpart, mpt2sas_base_free_resources needs to be careful about cleaning up: 1 - _base_mask_interrupts and _base_make_ioc_ready require memory mapped I/O registers, make sure that this is true. 2 - _base_free_irq iterates over the adapter's reply_queue_list, so move this list head initialization out of _base_enable_msix to _scsih_probe so this will always be safe. 3 - check that the controller PCI device and its BARs have been enabled before disabling them. Signed-off-by: -
Ewan D. Milne authored
Generate a uevent when the following Unit Attention ASC/ASCQ codes are received: 2A/01 MODE PARAMETERS CHANGED 2A/09 CAPACITY DATA HAS CHANGED 38/07 THIN PROVISIONING SOFT THRESHOLD REACHED 3F/03 INQUIRY DATA HAS CHANGED 3F/0E REPORTED LUNS DATA HAS CHANGED Log kernel messages when the following Unit Attention ASC/ASCQ codes are received that are not as specific as those above: 2A/xx PARAMETERS CHANGED 3F/xx TARGET OPERATING CONDITIONS HAVE CHANGED Added logic to set expecting_lun_change for other LUNs on the target after REPORTED LUNS DATA HAS CHANGED is received, so that duplicate uevents are not generated, and clear expecting_lun_change when a REPORT LUNS command completes, in accordance with the SPC-3 specification regarding reporting of the 3F 0E ASC/ASCQ UA. [jejb: remove SPC3 test in scsi_report_lun_change and some docbook fixes and unused variable fix, both reported by Fengguang Wu] Signed-off-by:Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
wenxiong@linux.vnet.ibm.com authored
Add the appropriate definitions and table entries for new adapter support. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
Tomas Henzl authored
Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Acked-by:
-
Tomas Henzl authored
When the driver calls scsi_done and after that frees it's internal preallocated memory it can happen that a new job is enqueud before the memory is freed. The allocation fails and the message "cmd_alloc returned NULL" is shown. Patch below fixes it by moving cmd->scsi_done after cmd_free. Signed-off-by:
-
Xinghai Yu authored
It seems the "phy_index++;" have been placed in wrong place, without it the while circle up will do a infinite loop. Signed-off-by:
Xinghai Yu <yuxinghai@cn.fujitsu.com> Acked-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
-
Wolfram Sang authored
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Santosh Y <santoshsy@gmail.com> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
