- 16 Jan, 2017 24 commits
-
-
Heiko Carstens authored
Yet another trivial patch to reduce the noise that coccinelle generates. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Remove a couple of unneeded semicolons. This is just to reduce the noise that the coccinelle static code checker generates. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Merge the seven printks within topology_init_early to a single one. With an early boot console this avoids printing six lines each containing only a single character. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Fix a long-standing but currently irrelevant bug: the memory detection code performs a tprot instruction on address zero to figure out if the first memory chunk is readable or writable. Due to low address protection the result is "read-only". If the memory detection code would actually care, it would have to ignore the first memory increment, but it adds the memory increment to writable memory anyway. If memblock debugging is enabled this leads to an extra rather surprising call which registers memory. To avoid this get rid of the first misleading tprot call and simply assume that the first memory increment is writable. Otherwise we wouldn't have reached the memory detection code anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
The s390 specific memory detection code does not call memblock_add, which would generate debug output if memblock=debug is specified on the kernel command line. Instead it directly calls memblock_add_range, which doesn't generate any debug output. To have a chance to debug early memblock related bugs add an s390 specific memblock_dbg call and a (missing) memblock_dump_all call. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
reserve_initrd currently calls memblock_reserve even if the to be reserved size is zero. Even though the memblock core code can handle this correctly, it still yields confusing debug messages if memblock debugging is enabled. Therefore make sure to not call memblock_reserve with a size of zero. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Add proper annotation to the bar definition and use casts within the bus accessors. Also change the sequence in the accessors to do the shifts in the native byte order. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Keep sparse and other static code checkers from emitting warnings like: arch/s390/kernel/ipl.c:1549:14: warning: incorrect type in assignment (different base types) arch/s390/kernel/ipl.c:1549:14: expected unsigned int [unsigned] csum arch/s390/kernel/ipl.c:1549:14: got restricted __wsum All usages in s390 code are ok. Therefore add proper casts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Corentin Labbe authored
drivers/s390/char/zcore.c does not contain any miscdevice so the inclusion of linux/miscdevice.h is uncessary. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Remove an unused member of struct channel subsystem. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Simplify error handling during css initialization by moving the error handling code to setup_css (which now cleans up after itself). Also remove the odd special cleanup handling of the pseudo_subchannel. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Cleanup the code to handle the css device attribute. Move everything to an attribute group to let the driver core handle attribute creation and removal. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Obtain the real channel subsystem id and use that for the generation of a unique path group id. Note that this change does not affect the channel subsystem id as used in the user-visible naming of subchannels and friends. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshik@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Currently the cssid in various structures is used as the id of the respective channel subsystem. Sometimes however we call the index in the channel_subsystems array cssid. In some places the id is even used as the index. Provide a new define MAX_CSS_IDX and use it where appropriate. In addition to that provide a dummy function to find a channel subsystem by its id and a macro to iterate over the channel subsystems. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
The variable length arrays used to specify clobbered memory within ap_nqap and ap_dqap would only work if the length would be known at compile time. This is not the case for both usages. Therefore simply use a full memory clobber and get rid of the old construct. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Get rid of these: drivers/s390/crypto/ap_card.c:140:20: warning: symbol 'ap_card_type' was not declared. Should it be static? drivers/s390/crypto/ap_queue.c:567:20: warning: symbol 'ap_queue_type' was not declared. Should it be static? Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Use a flexible array instead. The size of the structure is not used within chsc_sstpi, therefore no change in semantics but one less sparse warning: drivers/s390/cio/chsc.c:1219:27: warning: Variable length array is used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Improve the memmove implementation to save one instruction and use better label names. Also use better label names for the memset and memcpy implementations so everything looks consistent. Suggested-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
The stcctm5 inline assembly uses a variable length array to specify the memory that is written to. According to the gcc manual this trick only works if the length is known at compile time. This is not the the case for the stccm5 inline assembly. Therefore simply use a full memory clobber. As requested by Martin also move the output Q constraint operand to the input operands list, since all we want is that the compiler generates an instruction that may use the displacement field: in other words we only need the address of *val. That the inline assembly actually writes to an array starting at val is taken care of with the memory clobber. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-
Heiko Carstens authored
We have quite a lot of code that depends on the order of the __ctl_load inline assemby and subsequent memory accesses, like e.g. disabling lowcore protection and the writing to lowcore. Since the __ctl_load macro does not have memory barrier semantics, nor any other dependencies the compiler is, theoretically, free to shuffle code around. Or in other words: storing to lowcore could happen before lowcore protection is disabled. In order to avoid this class of potential bugs simply add a full memory barrier to the __ctl_load macro. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace fixes from Eric Biederman: "This tree contains 4 fixes. The first is a fix for a race that can causes oopses under the right circumstances, and that someone just recently encountered. Past that are several small trivial correct fixes. A real issue that was blocking development of an out of tree driver, but does not appear to have caused any actual problems for in-tree code. A potential deadlock that was reported by lockdep. And a deadlock people have experienced and took the time to track down caused by a cleanup that removed the code to drop a reference count" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Drop reference added by grab_header in proc_sys_readdir pid: fix lockdep deadlock warning due to ucount_lock libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount mnt: Protect the mountpoint hashtable with mount_lock
-
- 15 Jan, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 4.10-rc4 that resolve some reported issues. The MEI driver issue resolves a lot of problems that people have been having, as does the mem driver fix. The other minor fixes resolve other reported issues. All of these have been in linux-next for a while" * tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: vme: Fix wrong pointer utilization in ca91cx42_slave_get auxdisplay: fix new ht16k33 build errors ppdev: don't print a free'd string extcon: return error code on failure drivers: char: mem: Fix thinkos in kmem address checks mei: bus: enable OS version only for SPT and newer
-
Linus Torvalds authored
Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single patch being reverted to remove a feature that was added in 4.10-rc1 that isn't quite ready for release. It will be redone as a debugfs file instead of a sysfs file in the future" * tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver core: Add deferred_probe attribute to devices in sysfs"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a number of reported issues. Nothing major here at all, one revert of a problematic patch, and some other tiny bugfixes. Full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: sysrq: attach sysrq handler correctly for 32-bit kernel Revert "tty: serial: 8250: add CON_CONSDEV to flags" Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break 8250_pci: Fix potential use-after-free in error path tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 4.10-rc4 to resolve some reported issues. The "largest" here is a number of bugs being fixed in the ch341 usb-serial driver, to hopefully resolve the mess of different devices floating around that use this driver that have been having problems with the 4.10-rc1 release. There's also a tiny musb fix that I missed in the last pull request, as well as the traditional xhci fix rounding out the batch. All have been in linux-next with no reported issues" * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: fix deadlock at host remove by running watchdog correctly USB: serial: ch341: fix control-message error handling usb: musb: fix runtime PM in debugfs wusbcore: Fix one more crypto-on-the-stack bug USB: serial: kl5kusb105: fix line-state error handling USB: serial: ch341: fix baud rate and line-control handling USB: serial: ch341: fix line settings after reset-resume USB: serial: ch341: fix resume after reset USB: serial: ch341: fix open error handling USB: serial: ch341: fix modem-control and B0 handling USB: serial: ch341: fix open and resume after B0 USB: serial: ch341: fix initial modem-control state
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Bugfixes for I2C. Mostly core this time which is a bit unusual but nothing really scary in there" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Avoid race conditions with IMC i2c: fix spelling mistake: "insufficent" -> "insufficient" i2c: print correct device invalid address i2c: do not enable fall back to Host Notify by default i2c: fix kernel memory disclosure in dev interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - unwinder fixes - AMD CPU topology enumeration fixes - microcode loader fixes - x86 embedded platform fixes - fix for a bootup crash that may trigger when clearcpuid= is used with invalid values" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Use compatible types in comparison to fix sparse error x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() x86/entry: Fix the end of the stack for newly forked tasks x86/unwind: Include __schedule() in stack traces x86/unwind: Disable KASAN checks for non-current tasks x86/unwind: Silence warnings for non-current tasks x86/microcode/intel: Use correct buffer size for saving microcode data x86/microcode/intel: Fix allocation size of struct ucode_patch x86/microcode/intel: Add a helper which gives the microcode revision x86/microcode: Use native CPUID to tickle out microcode revision x86/CPU: Add native CPUID variants returning a single datum x86/boot: Add missing declaration of string functions x86/CPU/AMD: Fix Bulldozer topology x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' x86/cpu: Fix typo in the comment for Anniedale x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull NOHZ fix from Ingo Molnar: "This fixes an old NOHZ race where we incorrectly calculate the next timer interrupt in certain circumstances where hrtimers are pending, that can cause hard to reproduce stalled-values artifacts in /proc/stat" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Fix collision between tick and other hrtimers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "A number of regression fixes: - Fix a boot hang on machines that have somewhat unusual memory map entries of phys_addr=0x0 num_pages=0, which broke due to a recent commit. This commit got cherry-picked from the v4.11 queue because the bug is affecting real machines. - Fix a boot hang also reported by KASAN, caused by incorrect init ordering introduced by a recent optimization. - Fix a recent robustification fix to allocate_new_fdt_and_exit_boot() that introduced an invalid assumption. Neither bugs were seen in the wild AFAIK" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Prune invalid memory map entries and fix boot regression x86/efi: Don't allocate memmap through memblock after mm_init() efi/libstub/arm*: Pass latest memory map to the kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro. The most notable fix here is probably the fix for a splice regression ("fix a fencepost error in pipe_advance()") noticed by Alan Wylie. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a fencepost error in pipe_advance() coredump: Ensure proper size of sparse core files aio: fix lock dep warning tmpfs: clear S_ISGID when setting posix ACLs
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - the virtio_blk stack DMA corruption fix from Christoph, fixing and issue with VMAP stacks. - O_DIRECT blkbits calculation fix from Chandan. - discard regression fix from Christoph. - queue init error handling fixes for nbd and virtio_blk, from Omar and Jeff. - two small nvme fixes, from Christoph and Guilherme. - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead, to more closely follow what we do in other places in the block layer. This interface is new for this series, so let's get the naming right before releasing a kernel with this feature. From Damien. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't try to discard from __blkdev_issue_zeroout sd: remove __data_len hack for WRITE SAME nvme: use blk_rq_payload_bytes scsi: use blk_rq_payload_bytes block: add blk_rq_payload_bytes block: Rename blk_queue_zone_size and bdev_zone_size nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too nvme-rdma: fix nvme_rdma_queue_is_ready virtio_blk: fix panic in initialization error path nbd: blk_mq_init_queue returns an error code on failure, not NULL virtio_blk: avoid DMA to stack for the sense buffer do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned
-
Al Viro authored
The logics in pipe_advance() used to release all buffers past the new position failed in cases when the number of buffers to release was equal to pipe->buffers. If that happened, none of them had been released, leaving pipe full. Worse, it was trivial to trigger and we end up with pipe full of uninitialized pages. IOW, it's an infoleak. Cc: stable@vger.kernel.org # v4.9 Reported-by: "Alan J. Wylie" <alan@wylie.me.uk> Tested-by: "Alan J. Wylie" <alan@wylie.me.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Dave Kleikamp authored
If the last section of a core file ends with an unmapped or zero page, the size of the file does not correspond with the last dump_skip() call. gdb complains that the file is truncated and can be confusing to users. After all of the vma sections are written, make sure that the file size is no smaller than the current file position. This problem can be demonstrated with gdb's bigcore testcase on the sparc architecture. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Shaohua Li authored
lockdep reports a warnning. file_start_write/file_end_write only acquire/release the lock for regular files. So checking the files in aio side too. [ 453.532141] ------------[ cut here ]------------ [ 453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670 [ 453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0) [ 453.533011] Modules linked in: [ 453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964 [ 453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 453.533011] ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000 [ 453.533011] ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008 [ 453.533011] ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef [ 453.533011] Call Trace: [ 453.533011] [<ffffffff8196cffb>] dump_stack+0x67/0x9c [ 453.533011] [<ffffffff81091ee1>] __warn+0x111/0x130 [ 453.533011] [<ffffffff81091f97>] warn_slowpath_fmt+0x97/0xb0 [ 453.533011] [<ffffffff81091f00>] ? __warn+0x130/0x130 [ 453.533011] [<ffffffff8191b789>] ? blk_finish_plug+0x29/0x60 [ 453.533011] [<ffffffff811205d4>] lock_release+0x434/0x670 [ 453.533011] [<ffffffff8198af94>] ? import_single_range+0xd4/0x110 [ 453.533011] [<ffffffff81322195>] ? rw_verify_area+0x65/0x140 [ 453.533011] [<ffffffff813aa696>] ? aio_write+0x1f6/0x280 [ 453.533011] [<ffffffff813aa6c9>] aio_write+0x229/0x280 [ 453.533011] [<ffffffff813aa4a0>] ? aio_complete+0x640/0x640 [ 453.533011] [<ffffffff8111df20>] ? debug_check_no_locks_freed+0x1a0/0x1a0 [ 453.533011] [<ffffffff8114793a>] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30 [ 453.533011] [<ffffffff81147985>] ? debug_lockdep_rcu_enabled+0x35/0x40 [ 453.533011] [<ffffffff812a92be>] ? __might_fault+0x7e/0xf0 [ 453.533011] [<ffffffff813ac9bc>] do_io_submit+0x94c/0xb10 [ 453.533011] [<ffffffff813ac2ae>] ? do_io_submit+0x23e/0xb10 [ 453.533011] [<ffffffff813ac070>] ? SyS_io_destroy+0x270/0x270 [ 453.533011] [<ffffffff8111d7b3>] ? mark_held_locks+0x23/0xc0 [ 453.533011] [<ffffffff8100201a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 453.533011] [<ffffffff813acb90>] SyS_io_submit+0x10/0x20 [ 453.533011] [<ffffffff824f96aa>] entry_SYSCALL_64_fastpath+0x18/0xad [ 453.533011] [<ffffffff81119190>] ? trace_hardirqs_off_caller+0xc0/0x110 [ 453.533011] ---[ end trace b2fbe664d1cc0082 ]--- Cc: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 14 Jan, 2017 2 commits
-
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "The fixes this time around are spread over drivers, pretty normal update: - PCI ID for SKL ioatdma, workaround for SKX and ioat_alloc_chan_resources sleepy allocation fix - dw kconfig typo fix - null pointer deref for stm32 - MAINTAINERS Update for at_hdmac - pl330 runtime pm fixes - omap-dma port window fix - rcar-dmac unmap slave resource fix" * tag 'dmaengine-fix-4.10-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: unmap slave resource when channel is freed dmaengine: omap-dma: Fix the port_window support dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations. dmaengine: pl330: Fix runtime PM support for terminated transfers MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic dmaengine: omap-dma: Fix dynamic lch_map allocation dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path. dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status dmaengine: stm32-dma: Set correct args number for DMA request from DT dmaengine: dw: fix typo in Kconfig dmaengine: ioatdma: workaround SKX ioatdma version dmaengine: ioatdma: Add Skylake PCI Dev ID
-
Peter Jones authored
Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW (2.28), include memory map entries with phys_addr=0x0 and num_pages=0. These machines fail to boot after the following commit, commit 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Fix this by removing such bogus entries from the memory map. Furthermore, currently the log output for this case (with efi=debug) looks like: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0xffffffffffffffff] (0MB) This is clearly wrong, and also not as informative as it could be. This patch changes it so that if we find obviously invalid memory map entries, we print an error and skip those entries. It also detects the display of the address range calculation overflow, so the new output is: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) It also detects memory map sizes that would overflow the physical address, for example phys_addr=0xfffffffffffff000 and num_pages=0x0200000000000001, and prints: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid) It then removes these entries from the memory map. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT] Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> [Matt: Include bugzilla info in commit log] Cc: <stable@vger.kernel.org> # v4.9+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121Signed-off-by: Ingo Molnar <mingo@kernel.org>
-