[Why]
Need to get current DMUB time.

[How]
Add get_current_time interface to dmub_srv.

v2: drop whitespace changes (Alex)
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Previous patch caused crash and had been reverted. This patch
addresses the issue without regression.

[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.

[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating.
Add additional delay time for single rank dimm.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When determinism mode is disabled on aldebaran, max GFX clock will
be reset to default max frequency value.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: Use the current and custom pstate frequencies to track the current and
user-set min/max values in manual and determinism mode. Previously, only
actual_* value was used to track the currrent and user requested value.
The value will get reassigned whenever user requests a new value with
pp_od_clk_voltage node. Hence it will show incorrect values when user
requests an invalid value or tries a partial request without committing
the values. Separating out to custom and current variable fixes such
issues.

v2: Remove redundant if-else check
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add custom member for user requested custom frequency, level mask
or min/max frequencies. Add curr member to keep track of the current
active values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only clear RAS error counters if perestent EDC harvesting is not supported
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

there are 2 hubs to flush in the gmc, to make it easier
to debug when hub flush failed, refine the logs.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

KMD should not the program these registers,
so skip them in the SRIOV environment.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB
entries which need to update in amdgpu_map_buffer() should be multiplied
by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yi Li <liyi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need do a heavy-weight TLB flush to make sure we have no more dirty data
in the cache for the unmapped pages.

Define enum TLB_FLUSH_TYPE, add flush_type parameter to
amdgpu_amdkfd_flush_gpu_tlb_pasid.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 1704ac8e.

After "drm/amdgpu: flush TLB if valid PDE turns into PTE" is checked
in, this workaround is not needed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize unique_id from PF2VF under virtualization.

V2: skip smu_get_unique_id() under virtualization
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mapping huge page, 2MB aligned address with 2MB size, uses PDE0 as PTE.
If previously valid PDE0, PDE0.V=1 and PDE0.P=0 turns into PTE, this
requires TLB flush, otherwise page table walker will not read updated
PDE0.

Change page table update mapping to return table_freed flag to indicate
the previously valid PDE may have turned into a PTE if page table is
freed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Imported BOs don't have a pagelist any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 0575ff3d ("drm/radeon: stop using pages with drm_prime_sg_to_page_addr_arrays v2")

Not used outside of that file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop the last user of drm_mm_node.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This avoids reallocating scanout BOs on first pin in a lot of cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

One of the last remaining uses of drm_mm_node.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now that we found the underlying problem we can re-apply this patch.

This reverts commit 6b44b667.

v2: rebase on KFD changes
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only send boot_config cmd to ASICs that support dynamic
boot config. Otherwise, the boot_config cmd will fail.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check firmware flags to determine whether dynmaic
boot config is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check cached firmware_flags to determin whether
two stage mem training is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check cached firmware_flags to determine whether
sram ecc is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check cached firmware_flags to determine if gpu
virtualization is supported in vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fimware capability was changed from 16 bits to 32 bits
for atomfirmware. add helper funciton to query firmware
capability and cache the value at early stage.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Update SRIOV PF2VF header with latest revision

- Extend existing function in amdgpu_virt.c to read MM bandwidth config
  from PF2VF message

- Add SRIOV Sienna Cichlid codec array and update the bandwidth with
  PF2VF message

v2: squash in removal of unused variable (Alex)
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Monk liu <monk.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MTYPE UC was used for a specific use case that ended up not being
implemented. Use NC for better performance for coarse-grained memory where
cache coherence during shader execution is not required.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MTYPE UC was used for a specific use case that ended up not being
implemented. Use NC for better performance for coarse-grained memory where
cache coherence during shader execution is not required.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add compile flag CONFIG_DEBUG_FS to clear the warning:
unused variable 'amdgpu_securedisplay_debugfs_ops'
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The user applications maybe register the KFD_EVENT_TYPE_HW_EXCEPTION and
KFD_EVENT_TYPE_MEMORY events, driver could notify them when poison data
consumed. Beside that, some applications maybe register SIGBUS signal
hander. These applications will handle poison data by themselves, exit
or re-create context to re-dispatch works.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).

The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.

So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).

v2:
 - Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If xnack is on, new range is created to recover retry vm fault or
created by SVM API calls, set all GPUs have access to the range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update aldebaran driver-PMFW interface to version 0x07
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move the process of cancelling hrtimer to sw_fini
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since ASPM function has been stable, we don't need to add the modprobe
parameter and we can enable ASPM by default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update the method of disabling VCN IP for specific SKU for navi1x ASIC,
it will judge whether should add the related IP at the function of
amdgpu_device_ip_block_add().
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Judgement whether to add an sw ip according to the harvest info.

v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is possible that the previous waves have exited before others are
created, so the other waves maybe reuse pyhsical resouces left by
previous ones. Therefore add barrier instruction to synchronize waves within
the same threadgroup.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add missing structure elements.

Fixes: 0dd79532 ("drm/amdgpu/display: Implement functions to let DC allocate GPU memory")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>