Pull ARM SoC fix from Arnd Bergmann:
 "One more last minute revert for a boot regression that was found on
  the popular colibri-imx7"

* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: dts: imx7: Fix NAND controller size-cells"

Pull drm fixes from Dave Airlie:
 "Last set of fixes for final, scattered bunch of fixes, two amdgpu, one
  vmwgfx, and some misc others.

  amdgpu:
   - S0ix fix
   - DCN 3.2 array out of bounds fix

  shmem:
   - Fixes to shmem-helper error paths

  bridge:
   - Fix polarity bug in bridge/ti-sn65dsi86

  dw-hdmi:
   - Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since
     some panels lie about YUV support

  vmwgfx:
   - Stop using screen objects when SEV is active"

* tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: fix array index out of bound error in DCN32 DML
  drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend
  drm/vmwgfx: Don't use screen objects when SEV is active
  drm/shmem-helper: Avoid vm_open error paths
  drm/shmem-helper: Remove errant put in error path
  drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420
  drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
  drm/vmwgfx: Fix race issue calling pin_user_pages

drm-misc-fixes for v6.1 final?:
- Fix polarity bug in bridge/ti-sn65dsi86.
- Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since some
  panels lie about YUV support.
- Fixes to shmem-helper error paths.
- Small vmwgfx to stop using screen objects when SEV is active.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8110f02d-d155-926e-8674-c88b806c3a3a@linux.intel.com

Merge tag 'amd-drm-fixes-6.1-2022-12-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-12-07:

amdgpu:
- S0ix fix
- DCN 3.2 array out of bounds fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207222751.9558-1-alexander.deucher@amd.com

Pull block fix from Jens Axboe:
 "A small fix for initializing the NVMe quirks before initializing the
  subsystem"

* tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux:
  nvme initialize core quirks before calling nvme_init_subsystem

Pull io_uring fix from Jens Axboe:
 "A single small fix for an issue related to ordering between
  cancelation and current->io_uring teardown"

* tag 'io_uring-6.1-2022-12-08' of git://git.kernel.dk/linux:
  io_uring: Fix a null-ptr-deref in io_tctx_exit_cb()

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, can and netfilter.

  Current release - new code bugs:

   - bonding: ipv6: correct address used in Neighbour Advertisement
     parsing (src vs dst typo)

   - fec: properly scope IRQ coalesce setup during link up to supported
     chips only

  Previous releases - regressions:

   - Bluetooth fixes for fake CSR clones (knockoffs):
       - re-add ERR_DATA_REPORTING quirk
       - fix crash when device is replugged

   - Bluetooth:
       - silence a user-triggerable dmesg error message
       - L2CAP: fix u8 overflow, oob access
       - correct vendor codec definition
       - fix support for Read Local Supported Codecs V2

   - ti: am65-cpsw: fix RGMII configuration at SPEED_10

   - mana: fix race on per-CQ variable NAPI work_done

  Previous releases - always broken:

   - af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
     avoid null-deref

   - af_can: fix NULL pointer dereference in can_rcv_filter

   - can: slcan: fix UAF with a freed work

   - can: can327: flush TX_work on ldisc .close()

   - macsec: add missing attribute validation for offload

   - ipv6: avoid use-after-free in ip6_fragment()

   - nft_set_pipapo: actually validate intervals in fields after the
     first one

   - mvneta: prevent oob access in mvneta_config_rss()

   - ipv4: fix incorrect route flushing when table ID 0 is used, or when
     source address is deleted

   - phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"

* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
  s390/qeth: fix use-after-free in hsci
  macsec: add missing attribute validation for offload
  net: mvneta: Fix an out of bounds check
  net: thunderbolt: fix memory leak in tbnet_open()
  ipv6: avoid use-after-free in ip6_fragment()
  net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
  net: phy: mxl-gpy: add MDINT workaround
  net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
  xen/netback: don't call kfree_skb() under spin_lock_irqsave()
  dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
  ethernet: aeroflex: fix potential skb leak in greth_init_rings()
  tipc: call tipc_lxc_xmit without holding node_read_lock
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
  net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
  ipv4: Fix incorrect route flushing when table ID 0 is used
  ipv4: Fix incorrect route flushing when source address is deleted
  ...

Pull HID fixes from Jiri Kosina:
 "A regression fix for handling Logitech HID++ devices and memory
  corruption fixes:

   - regression fix (revert) for catch-all handling of Logitech HID++
     Bluetooth devices; there are devices that turn out not to work with
     this, and the root cause is yet to be properly understood. So we
     are dropping it for now, and it will be revisited for 6.2 or 6.3
     (Benjamin Tissoires)

   - memory corruption fix in HID core (ZhangPeng)

   - memory corruption fix in hid-lg4ff (Anastasia Belova)

   - Kconfig fix for I2C_HID (Benjamin Tissoires)

   - a few device-id specific quirks that piggy-back on top of the
     important fixes above"

* tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices"
  Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices"
  HID: usbhid: Add ALWAYS_POLL quirk for some mice
  HID: core: fix shift-out-of-bounds in hid_report_raw_event
  HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
  HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is
  HID: hid-lg4ff: Add check for empty lbuf
  HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10
  HID: uclogic: Fix frame templates for big endian architectures

Pull ARM SoC fix from Arnd Bergmann:
 "One last build fix came in, addressing a link failure when building
  without CONFIG_OUTER_CACHE"

* tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: at91: fix build for SAMA5D3 w/o L2 cache

This reverts commit 532223c8.

As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice,
but there are corner cases where hid-logitech-hidpp just gives up on
the mouse. This leads the end user with a dead mouse.

Given that we are at -rc8, we are definitively too late to find a proper
fix. We already identified 2 issues less than 24 hours after the bug
report. One in that ->match() was never designed to be used anywhere else
than in hid-generic, and the other that hid-logitech-hidpp has corner
cases where it gives up on devices it is not supposed to.

So we have no choice but postpone this patch to the next kernel release.

[0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit 8544c812.

We need to revert commit 532223c8 ("HID: logitech-hidpp: Enable HID++
for all the Logitech Bluetooth devices") because that commit might make
hid-logitech-hidpp bind on mice that are not well enough supported by
hid-logitech-hidpp, and the end result is that the probe of those mice
is now returning -ENODEV, leaving the end user with a dead mouse.

Given that commit 8544c812 ("HID: logitech-hidpp: Remove special-casing
of Bluetooth devices") is a direct dependency of 532223c8, revert it
too.

Note that this also adapt according to commit 908d325e ("HID:
logitech-hidpp: Detect hi-res scrolling support") to re-add support of
the devices that were removed from that commit too.

I have locally an MX Master and I tested this device with that revert,
ensuring we still have high-res scrolling.
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Export smp_send_reschedule() for modules use, fix a huge page entry
  update issue, and add documents for booting description"

* tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  docs/zh_CN: Add LoongArch booting description's translation
  docs/LoongArch: Add booting description
  LoongArch: mm: Fix huge page entry update for virtual machine
  LoongArch: Export symbol for function smp_send_reschedule()

Pull xen fix from Juergen Gross:
 "A single fix for the recent security issue XSA-423"

* tag 'for-linus-xsa-6.1-rc9b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/netback: fix build warning

Pull gpio fixes from Bartosz Golaszewski:

 - fix a memory leak in gpiolib core

 - fix reference leaks in gpio-amd8111 and gpio-rockchip

* tag 'gpio-fixes-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio/rockchip: fix refcount leak in rockchip_gpiolib_register()
  gpio: amd8111: Fix PCI device reference count leak
  gpiolib: fix memory leak in gpiochip_setup_dev()

Pull ATA fix from Damien Le Moal:

 - Avoid a NULL pointer dereference in the libahci platform code that
   can happen on initialization when a device tree does not specify
   names for the adapter clocks (from Anders)

* tag 'ata-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libahci_platform: ahci_platform_find_clk: oops, NULL pointer

memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call.  As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file.  Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.

Prior to 347c4a87 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses.  The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently
dropped the file type check with it allowing any file to slip through.
With the invarients broken, the d_name and parent accesses can now race
against renames and removals of arbitrary files and cause
use-after-free's.

Fix the bug by resurrecting the file type check in __file_cft().  Now
that cgroupfs is implemented through kernfs, checking the file
operations needs to go through a layer of indirection.  Instead, let's
check the superblock and dentry type.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 347c4a87 ("memcg: remove cgroup_event->cft")
Cc: stable@kernel.org # v3.14+
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The SJA1105 family has 45 L2 policing table entries
(SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110
(SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but
accounting for the difference in port count (5 in SJA1105 vs 10 in
SJA1110) does not fully explain the difference. Rather, the SJA1110 also
has L2 ingress policers for multicast traffic. If a packet is classified
as multicast, it will be processed by the policer index 99 + SRCPORT.

The sja1105_init_l2_policing() function initializes all L2 policers such
that they don't interfere with normal packet reception by default. To have
a common code between SJA1105 and SJA1110, the index of the multicast
policer for the port is calculated because it's an index that is out of
bounds for SJA1105 but in bounds for SJA1110, and a bounds check is
performed.

The code fails to do the proper thing when determining what to do with the
multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast"
index will be equal to 45, which is also equal to
table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes
through the check. But at the same time, SJA1105 doesn't have multicast
policers. So the code programs the SHARINDX field of an out-of-bounds
element in the L2 Policing table of the static config.

The comparison between index 45 and 45 entries should have determined the
code to not access this policer index on SJA1105, since its memory wasn't
even allocated.

With enough bad luck, the out-of-bounds write could even overwrite other
valid kernel data, but in this case, the issue was detected using KASAN.

Kernel log:

sja1105 spi5.0: Probed switch chip: SJA1105Q
==================================================================
BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340
Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8
...
Workqueue: events_unbound deferred_probe_work_func
Call trace:
...
sja1105_setup+0x1cbc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...
Allocated by task 8:
...
sja1105_setup+0x1bcc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...

Fixes: 38fbe91f ("net: dsa: sja1105: configure the multicast policers, if present")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Radu Nicolae Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20221207132347.38698-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KASAN found that addr was dereferenced after br2dev_event_work was freed.

==================================================================
BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0
Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540
CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G            E      6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1
Hardware name: IBM 8561 T01 703 (LPAR)
Workqueue: 0.0.8000_event qeth_l2_br2dev_worker
Call Trace:
 [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8
 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0
 [<000000016942d118>] print_report+0x110/0x1f8
 [<0000000167a7bd04>] kasan_report+0xfc/0x128
 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0
 [<00000001673edd1e>] process_one_work+0x76e/0x1128
 [<00000001673ee85c>] worker_thread+0x184/0x1098
 [<000000016740718a>] kthread+0x26a/0x310
 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8
 [<00000001694711da>] ret_from_fork+0xa/0x40
Allocated by task 108338:
 kasan_save_stack+0x40/0x68
 kasan_set_track+0x36/0x48
 __kasan_kmalloc+0xa0/0xc0
 qeth_l2_switchdev_event+0x25a/0x738
 atomic_notifier_call_chain+0x9c/0xf8
 br_switchdev_fdb_notify+0xf4/0x110
 fdb_notify+0x122/0x180
 fdb_add_entry.constprop.0.isra.0+0x312/0x558
 br_fdb_add+0x59e/0x858
 rtnl_fdb_add+0x58a/0x928
 rtnetlink_rcv_msg+0x5f8/0x8d8
 netlink_rcv_skb+0x1f2/0x408
 netlink_unicast+0x570/0x790
 netlink_sendmsg+0x752/0xbe0
 sock_sendmsg+0xca/0x110
 ____sys_sendmsg+0x510/0x6a8
 ___sys_sendmsg+0x12a/0x180
 __sys_sendmsg+0xe6/0x168
 __do_sys_socketcall+0x3c8/0x468
 do_syscall+0x22c/0x328
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
Freed by task 540:
 kasan_save_stack+0x40/0x68
 kasan_set_track+0x36/0x48
 kasan_save_free_info+0x4c/0x68
 ____kasan_slab_free+0x14e/0x1a8
 __kasan_slab_free+0x24/0x30
 __kmem_cache_free+0x168/0x338
 qeth_l2_br2dev_worker+0x154/0x6b0
 process_one_work+0x76e/0x1128
 worker_thread+0x184/0x1098
 kthread+0x26a/0x310
 __ret_from_fork+0x8a/0xe8
 ret_from_fork+0xa/0x40
Last potentially related work creation:
 kasan_save_stack+0x40/0x68
 __kasan_record_aux_stack+0xbe/0xd0
 insert_work+0x56/0x2e8
 __queue_work+0x4ce/0xd10
 queue_work_on+0xf4/0x100
 qeth_l2_switchdev_event+0x520/0x738
 atomic_notifier_call_chain+0x9c/0xf8
 br_switchdev_fdb_notify+0xf4/0x110
 fdb_notify+0x122/0x180
 fdb_add_entry.constprop.0.isra.0+0x312/0x558
 br_fdb_add+0x59e/0x858
 rtnl_fdb_add+0x58a/0x928
 rtnetlink_rcv_msg+0x5f8/0x8d8
 netlink_rcv_skb+0x1f2/0x408
 netlink_unicast+0x570/0x790
 netlink_sendmsg+0x752/0xbe0
 sock_sendmsg+0xca/0x110
 ____sys_sendmsg+0x510/0x6a8
 ___sys_sendmsg+0x12a/0x180
 __sys_sendmsg+0xe6/0x168
 __do_sys_socketcall+0x3c8/0x468
 do_syscall+0x22c/0x328
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
Second to last potentially related work creation:
 kasan_save_stack+0x40/0x68
 __kasan_record_aux_stack+0xbe/0xd0
 kvfree_call_rcu+0xb2/0x760
 kernfs_unlink_open_file+0x348/0x430
 kernfs_fop_release+0xc2/0x320
 __fput+0x1ae/0x768
 task_work_run+0x1bc/0x298
 exit_to_user_mode_prepare+0x1a0/0x1a8
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
The buggy address belongs to the object at 00000000fdcea400
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 64 bytes inside of
 96-byte region [00000000fdcea400, 00000000fdcea460)
The buggy address belongs to the physical page:
page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea
flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff)
raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00
raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 00000000fdcea380: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>00000000fdcea400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                                           ^
 00000000fdcea480: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 00000000fdcea500: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================

Fixes: f7936b7b ("s390/qeth: Update MACs of LEARNING_SYNC device")
Reported-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20221207105304.20494-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing attribute validation for IFLA_MACSEC_OFFLOAD
to the netlink policy.

Fixes: 791bb3fc ("net: macsec: add support for specifying offload upon link creation")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20221207101618.989-1-ehakim@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In an earlier commit, I added a bounds check to prevent an out of bounds
read and a WARN().  On further discussion and consideration that check
was probably too aggressive.  Instead of returning -EINVAL, a better fix
would be to just prevent the out of bounds read but continue the process.

Background: The value of "pp->rxq_def" is a number between 0-7 by default,
or even higher depending on the value of "rxq_number", which is a module
parameter. If the value is more than the number of available CPUs then
it will trigger the WARN() in cpu_max_bits_warn().

Fixes: e8b4fc13 ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadamSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When tb_ring_alloc_rx() failed in tbnet_open(), ida that allocated in
tb_xdomain_alloc_out_hopid() is not released. Add
tb_xdomain_release_out_hopid() to the error path to release ida.

Fixes: 180b0689 ("thunderbolt: Allow multiple DMA tunnels over a single XDomain connection")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20221207015001.1755826-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 753395ea.

It introduced a boot regression on colibri-imx7, and potentially any
other i.MX7 boards with MTD partition list generated into the fdt by
U-Boot.

While the commit we are reverting here is not obviously wrong, it fixes
only a dt binding checker warning that is non-functional, while it
introduces a boot regression and there is no obvious fix ready.

Fixes: 753395ea ("ARM: dts: imx7: Fix NAND controller size-cells")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/
Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Translate ../loongarch/booting.rst into Chinese.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, Describe the information passed from BootLoader to kernel.
2, Describe the meaning and values of the kernel image header field.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In virtual machine (guest mode), the tlbwr instruction can not write the
last entry of MTLB, so we need to make it non-present by invtlb and then
write it by tlbfill. This also simplify the whole logic.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Function smp_send_reschedule() is standard kernel API, which is defined
in header file include/linux/smp.h. However, on LoongArch it is defined
as an inline function, this is confusing and kernel modules can not use
this function.

Now we define smp_send_reschedule() as a general function, and add a
EXPORT_SYMBOL_GPL on this function, so that kernel modules can use it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers.

It seems to not be always true, at least for UDP stack.

syzbot reported:

BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline]
BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618

CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:284 [inline]
 print_report+0x15e/0x45d mm/kasan/report.c:395
 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
 ip6_dst_idev include/net/ip6_fib.h:245 [inline]
 ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
 ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 sock_write_iter+0x295/0x3d0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2191 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x9ed/0xdd0 fs/read_write.c:584
 ksys_write+0x1ec/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fde3588c0d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9
RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a
RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000
 </TASK>

Allocated by task 7618:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3398 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422
 dst_alloc+0x14a/0x1f0 net/core/dst.c:92
 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline]
 rt6_make_pcpu_route net/ipv6/route.c:1417 [inline]
 ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254
 pol_lookup_func include/net/ip6_fib.h:582 [inline]
 fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121
 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625
 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638
 ip6_route_output include/net/ip6_route.h:98 [inline]
 ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092
 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222
 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260
 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 __sys_sendto+0x23a/0x340 net/socket.c:2117
 __do_sys_sendto net/socket.c:2129 [inline]
 __se_sys_sendto net/socket.c:2125 [inline]
 __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 7599:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1724 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750
 slab_free mm/slub.c:3661 [inline]
 kmem_cache_free+0xee/0x5c0 mm/slub.c:3683
 dst_destroy+0x2ea/0x400 net/core/dst.c:127
 rcu_do_batch kernel/rcu/tree.c:2250 [inline]
 rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510
 __do_softirq+0x1fb/0xadc kernel/softirq.c:571

Last potentially related work creation:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x7d/0xe0 net/core/dst.c:167
 refdst_drop include/net/dst.h:256 [inline]
 skb_dst_drop include/net/dst.h:268 [inline]
 skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838
 skb_release_all net/core/skbuff.c:852 [inline]
 __kfree_skb net/core/skbuff.c:868 [inline]
 kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891
 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901
 kfree_skb_list include/linux/skbuff.h:1227 [inline]
 ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949
 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
 ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 sock_write_iter+0x295/0x3d0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2191 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x9ed/0xdd0 fs/read_write.c:584
 ksys_write+0x1ec/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x7d/0xe0 net/core/dst.c:167
 refdst_drop include/net/dst.h:256 [inline]
 skb_dst_drop include/net/dst.h:268 [inline]
 __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211
 dev_queue_xmit include/linux/netdevice.h:3008 [inline]
 neigh_resolve_output net/core/neighbour.c:1552 [inline]
 neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532
 neigh_output include/net/neighbour.h:546 [inline]
 ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134
 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
 ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206
 NF_HOOK_COND include/linux/netfilter.h:291 [inline]
 ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
 dst_output include/net/dst.h:445 [inline]
 NF_HOOK include/linux/netfilter.h:302 [inline]
 NF_HOOK include/linux/netfilter.h:296 [inline]
 mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
 mld_send_cr net/ipv6/mcast.c:2121 [inline]
 mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The buggy address belongs to the object at ffff88801d403dc0
 which belongs to the cache ip6_dst_cache of size 240
The buggy address is located 192 bytes inside of
 240-byte region [ffff88801d403dc0, ffff88801d403eb0)

The buggy address belongs to the physical page:
page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403
memcg:ffff888022f49c81
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640
raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441
 prep_new_page mm/page_alloc.c:2539 [inline]
 get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288
 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555
 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285
 alloc_slab_page mm/slub.c:1794 [inline]
 allocate_slab+0x213/0x300 mm/slub.c:1939
 new_slab mm/slub.c:1992 [inline]
 ___slab_alloc+0xa91/0x1400 mm/slub.c:3180
 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279
 slab_alloc_node mm/slub.c:3364 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422
 dst_alloc+0x14a/0x1f0 net/core/dst.c:92
 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261
 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809
 mld_send_cr net/ipv6/mcast.c:2121 [inline]
 mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1459 [inline]
 free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509
 free_unref_page_prepare mm/page_alloc.c:3387 [inline]
 free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483
 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586
 qlink_free mm/kasan/quarantine.c:168 [inline]
 qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294
 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3398 [inline]
 kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443
 __alloc_skb+0x214/0x300 net/core/skbuff.c:497
 alloc_skb include/linux/skbuff.h:1267 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline]
 netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xd3/0x120 net/socket.c:734
 __sys_sendto+0x23a/0x340 net/socket.c:2117
 __do_sys_sendto net/socket.c:2129 [inline]
 __se_sys_sendto net/socket.c:2125 [inline]
 __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1758fd46 ("ipv6: remove unnecessary dst_hold() in ip6_fragment()")
Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It is not allowed to call kfree_skb() or consume_skb() from
hardware interrupt context or with interrupts being disabled.
So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq()
and dev_consume_skb_irq() under spin_lock_irq().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

At least the GPY215B and GPY215C has a bug where it is still driving the
interrupt line (MDINT) even after the interrupt status register is read
and its bits are cleared. This will cause an interrupt storm.

Although the MDINT is multiplexed with a GPIO pin and theoretically we
could switch the pinmux to GPIO input mode, this isn't possible because
the access to this register will stall exactly as long as the interrupt
line is asserted. We exploit this very fact and just read a random
internal register in our interrupt handler. This way, it will be delayed
until the external interrupt line is released and an interrupt storm is
avoided.

The internal register access via the mailbox was deduced by looking at
the downstream PHY API because the datasheet doesn't mention any of
this.

Fixes: 7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-07

The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.

The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.

The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.

* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
====================

Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "A single fix for 6.1 for suspend/resume issues on some AMD systems"

* tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd: pmc: Add a workaround for an s0i3 issue on Cezanne

If a cookie expires from the LRU and the LRU_DISCARD flag is set, but
the state machine has not run yet, it's possible another thread can call
fscache_use_cookie and begin to use it.

When the cookie_worker finally runs, it will see the LRU_DISCARD flag
set, transition the cookie->state to LRU_DISCARDING, which will then
withdraw the cookie.  Once the cookie is withdrawn the object is removed
the below oops will occur because the object associated with the cookie
is now NULL.

Fix the oops by clearing the LRU_DISCARD bit if another thread uses the
cookie before the cookie_worker runs.

  BUG: kernel NULL pointer dereference, address: 0000000000000008
  ...
  CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G     E    6.0.0-5.dneg.x86_64 #1
  Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
  Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs]
  RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles]
  ...
  Call Trace:
    netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs]
    process_one_work+0x217/0x3e0
    worker_thread+0x4a/0x3b0
    kthread+0xd6/0x100

Fixes: 12bb21a2 ("fscache: Implement cookie user counting and resource pinning")
Reported-by: Daire Byrne <daire.byrne@gmail.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Link: https://lore.kernel.org/r/20221117115023.1350181-1-dwysocha@redhat.com/ # v1
Link: https://lore.kernel.org/r/20221117142915.1366990-1-dwysocha@redhat.com/ # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While vb2_mmap took the mmap_lock mutex, vb2_get_unmapped_area didn't.
Add this.

Also take this opportunity to move the 'q->memory != VB2_MEMORY_MMAP'
check and vb2_fileio_is_active() check into __find_plane_by_offset() so
both vb2_mmap and vb2_get_unmapped_area do the same checks.

Since q->memory is checked while mmap_lock is held, also take that lock
in reqbufs and create_bufs when it is set, and set it back to
MEMORY_UNKNOWN on error.

Fixes: f035eb4e ("[media] videobuf2: fix lockdep warning")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[Why&How]
LinkCapacitySupport array is indexed with the number of voltage states and
not the number of max DPPs. Fix the error by changing the array
declaration to use the correct (larger) array size of total number of
voltage states.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

In the SDMA s0ix save process requires to turn off SDMA ring buffer for
avoiding the SDMA in-flight request, otherwise will suffer from SDMA page
fault which causes by page request from in-flight SDMA ring accessing at
SDMA restore phase.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2248
Cc: stable@vger.kernel.org # 6.0,5.15+
Fixes: f8f4e2a5 ("drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull NVMe fix from Christoph:

"nvme fixes for Linux 6.1

 - initialize core quirks before calling nvme_init_subsystem
   (Pankaj Raghav)"

* tag 'nvme-6.1-2022-12-07' of git://git.infradead.org/nvme:
  nvme initialize core quirks before calling nvme_init_subsystem

The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.

U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.

It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.

Fixes: d4ebf12b ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts
Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit ad7f402a ("xen/netback: Ensure protocol headers don't fall in
the non-linear area") introduced a (valid) build warning. There have
even been reports of this problem breaking networking of Xen guests.

Fixes: ad7f402a ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: be81992f ("xen/netback: don't queue unlimited number of packages")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20221205141333.3974565-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Cezanne platforms under the right circumstances have a synchronization
problem where attempting to enter s2idle may fail if the x86 cores are
put into HLT before hardware resume from the previous attempt has
completed.

To avoid this issue add a 10-20ms delay before entering s2idle another
time. This workaround will only be applied on interrupts that wake the
hardware but don't break the s2idle loop.

Cc: stable@vger.kernel.org # 6.1
Cc: "Mahapatra, Rajib" <Rajib.Mahapatra@amd.com>
Cc: "Raul Rangel" <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221116154341.13382-1-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>