- 18 Mar, 2014 1 commit
-
-
git://git.stlinux.com/devel/kernel/linux-stiArnd Bergmann authored
Merge "STi DT changes part 1 v2" from Srinivas Kandagatla: Patches : 01-02 are DT patches, adding interrupt support to pin controller driver, Driver changes are already going via Linus W's pinctrl tree. Patches: 03 - 06 are DT patches for reset/softreset controller. Reset controller driver is Acked by Philipp Zabel. Patches: 07, 08 are DT patches, adding Ethernet controller support patches, actual driver changes are already in v3.14-rc4 via Dave Millers net tree. Patches: 09, 10 are DT patches for IR driver support, actual IR driver is already available since v3.12. Reason for the delay is due to dependency on reset controller driver/headers. * tag 'DT-for-v3.15-part-1-v2' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: STIH416: Add IR support. ARM: STi: STIH415: Add IR support. ARM: STi: STiH416: Add ethernet support. ARM: STi: STiH415: Add ethernet support. ARM: STi: STiH416: Add soft reset controller support. ARM: STi: STiH416: Add reset controller support. ARM: STi: STiH415: Add soft reset controller support. ARM: STi: STiH415: Add reset controller support. ARM: STi: STiH415: Add interrupt support for pin controller ARM: STi: STiH416: Add interrupt support for pin controller Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- 17 Mar, 2014 13 commits
-
-
git://github.com/broadcom/mach-bcmArnd Bergmann authored
Merge "ARM: mach-bcm: dt updates for 3.15 - part 2" from Matt Porter: - BCM21664 SoC support - BCM59056 PMU support - BCM281xx reboot fix * tag 'armsoc/for-3.15/dt-2' of git://github.com/broadcom/mach-bcm: ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Updates to the .dts files to support more Gumstix boards. These are sent separately from the rest of the .dts changes as these depend on the fixes merged into v3.14-rc4, and needed a bit more time to get updated on the fixes. * tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add support for the Overo Summit ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Palo43 ARM: dts: overo: Add LIS33DE accelerometer ARM: dts: overo: Create a file for common Gumstix peripherals ARM: dts: overo: Push uart3 pinmux down to expansion board ARM: dts: omap3-tobi: Add AT24C01 EEPROM ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221 ARM: dts: omap: Add common file for SMSC9221 ARM: dts: omap3-overo: Add HSUSB PHY ARM: dts: omap3-overo: Enable WiFi/BT combo ARM: dts: omap3-overo: Add missing pinctrl ARM: dts: omap3-tobi: Add missing pinctrl ARM: dts: overo: reorganize include files Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "omap device tree changes for v3.15, part 3" from Tony Lindgren: Device tree related changes to the omap iommu driver as that is finally getting updated. Also few trivial board related .dts updates to add more devices. * tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530 ARM: dts: am335x-evmsk: enable DMA controller for USB ARM: dts: OMAP5: Add IOMMU nodes ARM: dts: OMAP4: Add IOMMU nodes ARM: dts: OMAP3: Add IVA IOMMU node ARM: dts: OMAP3: Update ISP IOMMU node ARM: OMAP2+: extend iommu pdata-quirks to OMAP5 ARM: OMAP5: hwmod data: add mmu data for ipu & dsp ARM: OMAP2+: use pdata quirks for iommu reset lines ARM: OMAP2+: change the ISP device archdata MMU name for DT ARM: OMAP3: fix iva mmu programming issues ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2 Signed-off-by:
-
https://github.com/mripard/linuxArnd Bergmann authored
Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard: - Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME - Addition of the I2C for the A31 - Addition USB Host mode for the A10, A10s, A13 and A20 - Addition of SATA support for the A10 and A20 - Change of compatible for the watchdog * tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits) ARM: sunxi: dt: Update the watchdog compatibles ARM: sun6i: colombus: Enable the I2C controllers ARM: sun6i: Enable the I2C muxing options ARM: sun6i: Enable the I2C controllers ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts ARM: sun7i: dt: Add USB host nodes to cubietruck dts ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino ARM: sun4i: dt: Add USB host nodes to pcduino.dts ARM: sun4i: dt: Add USB host nodes to mini-xplus dts ARM: sun4i: dt: Add USB host nodes to hackberry dts ARM: sun4i: dt: Add USB host nodes to cubieboard dts ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts ARM: sun7i: dt: Add USB host bindings ARM: sun5i: dt: Add USB host bindings ARM: sun4i: dt: Add USB host bindings ... Signed-off-by:
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
Merge "First batch of AT91 DT material for 3.15" from Nicolas Ferre: - activate DMA for NAND flash controller - some binding documentation update for usba and ADC (iio) drivers - removal of some deprecated ADC (iio) properties * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91/dt: at91-cosino: remove useless adc properties ARM: at91/dt: sama5d3: remove useless adc properties ARM: at91/dt: at91sam9x5: remove useless adc properties ARM: at91/dt: at91sam9g45: remove useless adc properties ARM: at91/dt: at91sam9260: remove useless adc properties ARM: at91/dt: at91-ariag25: remove useless adc properties Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt Documentation: dt: iio: improve atmel-adc documentation ARM: at91: sama5d3: get rid of atmel_tsadcc driver ARM: at91/DT: atmel_usba correct atmel,vbus-gpio meaning ARM: at91/DT: add NAND + DMA property Signed-off-by:
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper: - mvebu - 38x - add 2GHz fixed clock, core divider clock, and nand controller - 385 - add nand controller and partitions to 385-DB board * tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs Signed-off-by: -
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper: - dove - add system controller node - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI - mvebu - XP/370 - change default PCIe apertures - switch GP and DB boards internal registers to 0xf1000000 - correct RAM size on Matrix board - 385 - correct phy connection type for DB board - add RD board * tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu: ARM: dove: drop pinctrl PMU reg property ARM: mvebu: add Device Tree for the Armada 385 RD board ARM: mvebu: use the correct phy connection mode on Armada 385 DB ARM: mvebu: the Armada XP Matrix board has 4 GB ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000 ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000 ARM: mvebu: change the default PCIe apertures for Armada 370/XP ARM: dove: add system controller node Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: -
Arnd Bergmann authored
The dts Makefile has a bunch of nasty conflicts, attempt to resolve these now to avoid trouble later. Conflicts: arch/arm/boot/dts/Makefile Signed-off-by: -
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper: - mvebu - merge armada 375, 380, 385 boards (mvebu/dt-3xx) - kirkwood - Add many Synology NAS boards - add board HP T5325 - add L2 cache node - add system-controller node - add audio node - dove - add pinctrl and global-config register Depends: - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes) - removed dove PMU interrupt controller Conflicts: - mvebu/soc (arch/arm/boot/dts/Makefile) - add/add conflict. - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD) * tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add dts file describing HP T5325 thin client ARM: kirkwood: Add i2c alias so setting bus number ARM: kirkwood: Add audio node to kirkwood.dtsi ARM: mvebu: select dtbs from MACH_ARMADA_* ARM: dove: add global-config register node ARM: dove: add additional pinctrl registers ARM: mvebu: Instantiate system controller in kirkwood.dtsi ARM: kirkwood: Instantiate L2 cache from DT. ARM: mvebu: use macros for interrupt flags on Armada 375/38x ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs ARM: mvebu: use C preprocessor include for Armada 375/38x DTs ARM: Kirkwood: Add support for many Synology NAS devices DT: i2c: Trivial: Add sii,s35390a DT: Vendor prefixes: Add ricoh, qnap, sii and synology ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: add Device Tree for the Armada 385 DB board ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs ARM: mvebu: add Device Tree for the Armada 375 DB board ARM: mvebu: add Device Tree description of the Armada 375 SoC ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt arch/arm/boot/dts/Makefile Signed-off-by: -
git://git.pengutronix.de/git/ukl/linuxArnd Bergmann authored
Merge "Two more dt related efm32 fixes" from Uwe Kleine-König: * tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux: ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names Signed-off-by:
-
Arnd Bergmann authored
Dependency for efm32/dt branch. Signed-off-by: -
Olof Johansson authored
Merge tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r8a7791 (R-Car M2) based koelsch board - Add SDHI devices - Add ethernet * r8a7791 (R-Car M2) SoC - Correct clock index for i2c5 * r8a7790 (R-Car H2) based lager board - Add ethernet * tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add SDHI devices for Koelsch DTS ARM: shmobile: Add SDHI devices to r8a7791 DTSI ARM: shmobile: r8a7791: fix clock index for i2c5 ARM: shmobile: koelsch: add Ether DT support ARM: shmobile: r8a7791: add Ether DT support ARM: shmobile: lager: add Ether DT support ARM: shmobile: r8a7790: add Ether DT support Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r7s72100 SoC (RZ/A1H) - Add nodes for i2c controllers to DT * r7s72100 (RZ/A1H) based Genmai board - genmai: adapt dts to use native i2c driver * r8a7791 SoC (R-Car M2) - Remove superfluous interrupt-parents * r8a7791 (R-Car M2) based Koelsch board - Add i2c2 bus to DT - Add DU device to DT * r8a7790 SoC (R-Car H2) - Add i2c aliases - Remove superfluous interrupt-parents - Add QSPI node * r8a7790 SoC (R-Car M2) based Lager - Add DU, SDHI0/1 and QSPI to DT * r8a7778 SoC (R-Car M1) - Remove duplicate i2c nodes * tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: genmai: adapt dts to use native i2c driver ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt ARM: shmobile: r8a7791: add i2c master nodes to dtsi ARM: shmobile: r8a7790: add i2c aliases to dtsi ARM: shmobile: r8a7790: remove superfluous interrupt-parents ARM: shmobile: r8a7791: remove superfluous interrupt-parents ARM: shmobile: koelsch-reference: Add DU device to DTS ARM: shmobile: lager: Add DU device to DTS ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes ARM: shmobile: lager: add SDHI0/2 support on DTS ARM: shmobile: lager dts: Add QSPI nodes ARM: shmobile: r8a7790 dtsi: Add QSPI node Signed-off-by:
-
- 14 Mar, 2014 6 commits
-
-
Matt Porter authored
The BCM28155-AP board has a bootloader that expects the camldo1 regulator to be enabled on entry. Currently, the camldo1 regulator is disabled when no longer in use as is the case during a reboot / warm reset. This causes the early bootloader to hang upon entry. Add regulator-always-on to the camldo1 constraint to fix reboot. Reported-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Matt Porter <mporter@linaro.org> Tested-by:
-
Matt Porter authored
Add a dtsi to support the BCM590xx PMUs used by the BCM281xx family of SoCs. Enable regulators for use with the dwc2 and sdhci on bcm28155-ap. Signed-off-by:
Tim Kryger <tim.kryger@linaro.org> Signed-off-by:
Markus Mayer <markus.mayer@linaro.org>
-
Markus Mayer authored
Add device tree files for the Broadcom BCM21664 SoC. Signed-off-by:
-
Markus Mayer authored
Add binding documents for the Broadcom BCM21664 SoC. Signed-off-by:
-
Uwe Kleine-König authored
Wolfram Sang pointed out during review of an efm32-i2c driver that the property to specify the set of pins has a too general name. As several other efm32 peripherals also have a similar register bit field, add an "efm32" namespace. Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
Uwe Kleine-König authored
While removing the 0x prefixes in the unit addresses in reply to a review comment, I must somehow have messed up these two. Uups. Signed-off-by:
-
- 13 Mar, 2014 5 commits
-
-
Ezequiel Garcia authored
The Armada 385-DB board has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-6-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Ezequiel Garcia authored
The Armada 38x SoC family has a NAND controller, compatible with the controller in Armada 370/375/XP SoCs. Add support for it in the devicetree file. Signed-off-by:
-
Ezequiel Garcia authored
The Armada 38x SoC family has a clock provider called "Core Divider", derived from the fixed 2 GHz main PLL clock. This is similar to the one on A370, A375 and AXP. Signed-off-by:
-
Ezequiel Garcia authored
Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed other clocks. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by:
-
Maxime Ripard authored
The watchdog compatibles were following a different pattern than the one found in the other devices. Now that the driver supports the right pattern, switch to it in the DT. Signed-off-by:Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 12 Mar, 2014 15 commits
-
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver. Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by:
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by:
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by:
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by:
-
Alexandre Belloni authored
Remove the properties that are not used anymore by the at91_adc driver. Signed-off-by:
-
Alexandre Belloni authored
Signed-off-by:
-
Alexandre Belloni authored
This corrects the example by adding #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR, as suggested by Mark Rutland in http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html Also, it removes the properties that are not used anymore, to stop propagating them. Also fixes atmel,adc-use-external-triggers property name. Finally, fixes a few typos. Signed-off-by:
-
Stefan Roese authored
Add support for the MMC2/SDIO WiFi Libertas (Marvell) module available on the CM-T3530 SOM. Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Yegor Yefremov authored
Enable DMA controller for USB Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
-
Florian Vaussard authored
Summit is an expansion board for Gumstix Overo products. Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
-
Florian Vaussard authored
Chestnut43 is an expansion board for Gumstix Overo products. Signed-off-by:
-
Florian Vaussard authored
Alto35 is an expansion board for Gumstix Overo products. Signed-off-by:
-
Florian Vaussard authored
Gallop43 is an expansion board for Gumstix Overo products. Signed-off-by:
-
Florian Vaussard authored
Palo43 is an expansion board for Gumstix Overo products. Signed-off-by:
-
