- 09 Dec, 2016 1 commit
-
-
Thomas Gleixner authored
The clocksource delta to nanoseconds conversion is using signed math, but the delta is unsigned. This makes the conversion space smaller than necessary and in case of a multiplication overflow the conversion can become negative. The conversion is done with scaled math: s64 nsec_delta = ((s64)clkdelta * clk->mult) >> clk->shift; Shifting a signed integer right obvioulsy preserves the sign, which has interesting consequences: - Time jumps backwards - __iter_div_u64_rem() which is used in one of the calling code pathes will take forever to piecewise calculate the seconds/nanoseconds part. This has been reported by several people with different scenarios: David observed that when stopping a VM with a debugger: "It was essentially the stopped by debugger case. I forget exactly why, but the guest was being explicitly stopped from outside, it wasn't just scheduling lag. I think it was something in the vicinity of 10 minutes stopped." When lifting the stop the machine went dead. The stopped by debugger case is not really interesting, but nevertheless it would be a good thing not to die completely. But this was also observed on a live system by Liav: "When the OS is too overloaded, delta will get a high enough value for the msb of the sum delta * tkr->mult + tkr->xtime_nsec to be set, and so after the shift the nsec variable will gain a value similar to 0xffffffffff000000." Unfortunately this has been reintroduced recently with commit 6bd58f09 ("time: Add cycles to nanoseconds translation"). It had been fixed a year ago already in commit 35a4933a ("time: Avoid signed overflow in timekeeping_get_ns()"). Though it's not surprising that the issue has been reintroduced because the function itself and the whole call chain uses s64 for the result and the propagation of it. The change in this recent commit is subtle: s64 nsec; - nsec = (d * m + n) >> s: + nsec = d * m + n; + nsec >>= s; d being type of cycle_t adds another level of obfuscation. This wouldn't have happened if the previous change to unsigned computation would have made the 'nsec' variable u64 right away and a follow up patch had cleaned up the whole call chain. There have been patches submitted which basically did a revert of the above patch leaving everything else unchanged as signed. Back to square one. This spawned a admittedly pointless discussion about potential users which rely on the unsigned behaviour until someone pointed out that it had been fixed before. The changelogs of said patches added further confusion as they made finally false claims about the consequences for eventual users which expect signed results. Despite delta being cycle_t, aka. u64, it's very well possible to hand in a signed negative value and the signed computation will happily return the correct result. But nobody actually sat down and analyzed the code which was added as user after the propably unintended signed conversion. Though in sensitive code like this it's better to analyze it proper and make sure that nothing relies on this than hunting the subtle wreckage half a year later. After analyzing all call chains it stands that no caller can hand in a negative value (which actually would work due to the s64 cast) and rely on the signed math to do the right thing. Change the conversion function to unsigned math. The conversion of all call chains is done in a follow up patch. This solves the starvation issue, which was caused by the negative result, but it does not solve the underlying problem. It merily procrastinates it. When the timekeeper update is deferred long enough that the unsigned multiplication overflows, then time going backwards is observable again. It does neither solve the issue of clocksources with a small counter width which will wrap around possibly several times and cause random time stamps to be generated. But those are usually not found on systems used for virtualization, so this is likely a non issue. I took the liberty to claim authorship for this simply because analyzing all callsites and writing the changelog took substantially more time than just making the simple s/s64/u64/ change and ignore the rest. Fixes: 6bd58f09 ("time: Add cycles to nanoseconds translation") Reported-by:David Gibson <david@gibson.dropbear.id.au> Reported-by:
Liav Rehana <liavr@mellanox.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Parit Bhargava <prarit@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20161208204228.688545601@linutronix.deSigned-off-by:
-
- 01 Dec, 2016 1 commit
-
-
Baolin Wang authored
Alarm timers are one of the mechanisms to wake up a system from suspend, but there exist no tracepoints to analyse which process/thread armed an alarmtimer. Add tracepoints for start/cancel/expire of individual alarm timers and one for tracing the suspend time decision when to resume the system. The following trace excerpt illustrates the new mechanism: Binder:3292_2-3304 [000] d..2 149.981123: alarmtimer_cancel: alarmtimer:ffffffc1319a7800 type:REALTIME expires:1325463120000000000 now:1325376810370370245 Binder:3292_2-3304 [000] d..2 149.981136: alarmtimer_start: alarmtimer:ffffffc1319a7800 type:REALTIME expires:1325376840000000000 now:1325376810370384591 Binder:3292_9-3953 [000] d..2 150.212991: alarmtimer_cancel: alarmtimer:ffffffc1319a5a00 type:BOOTTIME expires:179552000000 now:150154008122 Binder:3292_9-3953 [000] d..2 150.213006: alarmtimer_start: alarmtimer:ffffffc1319a5a00 type:BOOTTIME expires:179551000000 now:150154025622 system_server-3000 [002] ...1 162.701940: alarmtimer_suspend: alarmtimer type:REALTIME expires:1325376840000000000 The wakeup time which is selected at suspend time allows to map it back to the task arming the timer: Binder:3292_2. [ tglx: Store alarm timer expiry time instead of some useless RTC relative information, add proper type information for wakeups which are handled via the clock_nanosleep/freezer and massage the changelog. ] Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Link: http://lkml.kernel.org/r/1480372524-15181-5-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
- 29 Nov, 2016 6 commits
-
-
Joel Fernandes authored
Documentation was missing for mono and mono_raw, add them and also for the boot clock introduced in this series. Signed-off-by:
Joel Fernandes <joelaf@google.com> Signed-off-by:
-
Joel Fernandes authored
Unlike monotonic clock, boot clock as a trace clock will account for time spent in suspend useful for tracing suspend/resume. This uses earlier introduced infrastructure for using the fast boot clock. Signed-off-by:
-
Joel Fernandes authored
This boot clock can be used as a tracing clock and will account for suspend time. To keep it NMI safe since we're accessing from tracing, we're not using a separate timekeeper with updates to monotonic clock and boot offset protected with seqlocks. This has the following minor side effects: (1) Its possible that a timestamp be taken after the boot offset is updated but before the timekeeper is updated. If this happens, the new boot offset is added to the old timekeeping making the clock appear to update slightly earlier: CPU 0 CPU 1 timekeeping_inject_sleeptime64() __timekeeping_inject_sleeptime(tk, delta); timestamp(); timekeeping_update(tk, TK_CLEAR_NTP...); (2) On 32-bit systems, the 64-bit boot offset (tk->offs_boot) may be partially updated. Since the tk->offs_boot update is a rare event, this should be a rare occurrence which postprocessing should be able to handle. Signed-off-by: -
Chris Metcalf authored
The "cycles" argument should not be an absolute clocksource cycle value, as the implementation's arithmetic will overflow relatively easily with wide (64 bit) clocksource counters. For performance, the implementation is simple and fast, since the function is intended for only relatively small delta values of clocksource cycles. [jstultz: Fixed up to merge against HEAD & commit message tweaks, also included rewording suggestion by Ingo] Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Chen Yu authored
Power management suspend/resume tracing (ab)uses the RTC to store suspend/resume information persistently. As a consequence the RTC value is clobbered when timekeeping is resumed and tries to inject the sleep time. Commit a4f8f666 ("timekeeping: Cap array access in timekeeping_debug") plugged a out of bounds array access in the timekeeping debug code which was caused by the clobbered RTC value, but we still use the clobbered RTC value for sleep time injection into kernel timekeeping, which will result in random adjustments depending on the stored "hash" value. To prevent this keep track of the RTC clobbering and ignore the invalid RTC timestamp at resume. If the system resumed successfully clear the flag, which marks the RTC as unusable, warn the user about the RTC clobber and recommend to adjust the RTC with 'ntpdate' or 'rdate'. [jstultz: Fixed up pr_warn formating, and implemented suggestions from Ingo] [ tglx: Rewrote changelog ] Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 22 Nov, 2016 1 commit
-
-
Arvind Yadav authored
Free memory mapping, if bcm2835_timer_init is not successful. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org>
-
- 21 Nov, 2016 3 commits
-
-
Stephen Boyd authored
Let's use the of_io_request_and_map() API so that the frame region is protected and shows up in /proc/iomem. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Brian Norris authored
The "arm,no-tick-in-suspend" property was introduced to note implementations where the system counter does not quite follow the ARM specification that it "must be implemented in an always-on power domain". Particularly, RK3399's counter stops ticking when we switch from the 24MHz clock to the 32KHz clock in low-power suspend, so let's mark it as such. Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Brian Norris authored
The ARM specifies that the system counter "must be implemented in an always-on power domain," and so we try to use the counter as a source of timekeeping across suspend/resume. Unfortunately, some SoCs (e.g., Rockchip's RK3399) do not keep the counter ticking properly when switched from their high-power clock to the lower-power clock used in system suspend. Support this quirk by adding a new device tree property. Signed-off-by:
-
- 16 Nov, 2016 6 commits
-
-
Nicolas Pitre authored
Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Acked-by:
Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.orgSigned-off-by:
-
Nicolas Pitre authored
There is no logical relation between add_device_randomness() and posix_cpu_timers_exit(). Let's move the former to where the later is called. This way, when posix-cpu-timers.c is compiled out, there is no need to worry about not losing a call to add_device_randomness(). Signed-off-by:
-
Nicolas Pitre authored
Move the only user of alarm_setitimer to itimer.c where it is defined. This allows for making alarm_setitimer static, and dropping it from the build when __ARCH_WANT_SYS_ALARM is not defined. Signed-off-by:
-
Nicolas Pitre authored
In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
-
Nicolas Pitre authored
Signed-off-by:
-
Nicolas Pitre authored
The "imply" keyword is a weak version of "select" where the target config symbol can still be turned off, avoiding those pitfalls that come with the "select" keyword. This is useful e.g. with multiple drivers that want to indicate their ability to hook into a secondary subsystem while allowing the user to configure that subsystem out without also having to unset these drivers. Currently, the same effect can almost be achieved with: config DRIVER_A tristate config DRIVER_B tristate config DRIVER_C tristate config DRIVER_D tristate [...] config SUBSYSTEM_X tristate default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...] This is unwieldy to maintain especially with a large number of drivers. Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X to y or n, excluding m, when some drivers are built-in. The "select" keyword allows for excluding m, but it excludes n as well. Hence this "imply" keyword. The above becomes: config DRIVER_A tristate imply SUBSYSTEM_X config DRIVER_B tristate imply SUBSYSTEM_X [...] config SUBSYSTEM_X tristate This is much cleaner, and way more flexible than "select". SUBSYSTEM_X can still be configured out, and it can be set as a module when none of the drivers are configured in or all of them are modular. Signed-off-by:
-
- 26 Oct, 2016 2 commits
-
-
Douglas Anderson authored
The documentation for schedule_timeout(), schedule_hrtimeout(), and schedule_hrtimeout_range() all claim that the routines couldn't possibly return early if the task state was TASK_UNINTERRUPTIBLE. This is simply not true since wake_up_process() will cause those routines to exit early. We cannot make schedule_[hr]timeout() loop until the timeout expires if the task state is uninterruptible because we have users which rely on the existing and designed behaviour. Make the documentation match the (correct) implementation. schedule_hrtimeout() returns -EINTR even when a uninterruptible task was woken up. This might look strange, but making the return code depend on the state is too much of an effort as it would affect all the call sites. There is no value in doing so, but we spell it out clearly in the documentation. Suggested-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Douglas Anderson authored
Users of usleep_range() expect that it will _never_ return in less time than the minimum passed parameter. However, nothing in the code ensures this, when the sleeping task is woken by wake_up_process() or any other mechanism which can wake a task from uninterruptible state. Neither usleep_range() nor schedule_hrtimeout_range*() have any protection against wakeups. schedule_hrtimeout_range*() is designed this way despite the fact that the API documentation does not mention it. msleep() already has code to handle this case since it will loop as long as there was still time left. usleep_range() has no such loop, add it. Presumably this problem was not detected before because usleep_range() is only used in a few places and the function is mostly used in contexts which are not exposed to wakeups of any form. An effort was made to look for users relying on the old behavior by looking for usleep_range() in the same file as wake_up_process(). No problems were found by this search, though it is conceivable that someone could have put the sleep and wakeup in two different files. An effort was made to ask several upstream maintainers if they were aware of people relying on wake_up_process() to wake up usleep_range(). No maintainers were aware of that but they were aware of many people relying on usleep_range() never returning before the minimum. Reported-by:
Tao Huang <huangtao@rock-chips.com> Signed-off-by:
-
- 24 Oct, 2016 1 commit
-
-
Linus Torvalds authored
-
- 23 Oct, 2016 5 commits
-
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI[FS] fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - Fallout from the merge window, refactoring UBI code introduced some issues. - Fixes for an UBIFS readdir bug which can cause getdents() to busy loop for ever and a bug in the UBIFS xattr code" * tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs: ubifs: Abort readdir upon error UBI: Fix crash in try_recover_peb() ubi: fix swapped arguments to call to ubi_alloc_aeb ubifs: Fix xattr_names length in exit paths ubifs: Rename ubifs_rename2 -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A few bug fixes and add some missing KERN_CONT annotations" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add missing KERN_CONT to a few more debugging uses fscrypto: lock inode while setting encryption policy ext4: correct endianness conversion in __xattr_check_inode() fscrypto: make XTS tweak initialization endian-independent ext4: do not advertise encryption support when disabled jbd2: fix incorrect unlock on j_list_lock ext4: super.c: Update logging style using KERN_CONT
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target-pending fixes for v4.9-rc2. This includes: - Fix v4.1.y+ reference leak regression with concurrent TMR ABORT_TASK + session shutdown. (Vaibhav Tandon) - Enable tcm_fc w/ SCF_USE_CPUID to avoid host exchange timeouts (Hannes) - target/user error sense handling fixes. (Andy + MNC + HCH) - Fix iscsi-target NOP_OUT error path iscsi_cmd descriptor leak (Varun) - Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni + Nixon Vincent) - Revert a v4.8 residual overflow change, that breaks sg_inq with small allocation lengths. There are a number of folks stress testing the v4.1.y regression fix in their environments, and more folks doing iser-target I/O stress testing atop recent v4.x.y code. There is also one v4.2.y+ RCU conversion regression related to explicit NodeACL configfs changes, that is still being tracked down" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/tcm_fc: use CPU affinity for responses target/tcm_fc: Update debugging statements to match libfc usage target/tcm_fc: return detailed error in ft_sess_create() target/tcm_fc: print command pointer in debug message target: fix potential race window in target_sess_cmd_list_waiting() Revert "target: Fix residual overflow handling in target_complete_cmd_with_length" target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE target: Re-add missing SCF_ACK_KREF assignment in v4.1.y iscsi-target: fix iscsi cmd leak iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited" target/user: Fix comments to not refer to data ring target/user: Return an error if cmd data size is too large target/user: Use sense_reason_t in tcmu_queue_cmd_ring -
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Couple of hwmon fixes: Fix a potential ERR_PTR dereference in max31790 driver, and handle temperature readings below 0 in adm9240 driver" * tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max31790) potential ERR_PTR dereference hwmon: (adm9240) handle temperature readings below 0
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver
-
- 22 Oct, 2016 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "This updates contains: - A revert which addresses a boot failure on ARM Sun5i platforms - A new clocksource driver, which has been delayed beyond rc1 due to an interrupt driver issue which was unearthed by this driver. The debugging of that issue and the discussion about the proper solution made this driver miss the merge window. There is no point in delaying it for a full cycle as it completes the basic mainline support for the new JCore platform and does not create any risk outside of that platform" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init" clocksource: Add J-Core timer/clocksource driver of: Add J-Core timer bindings -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Three fixes, a hw-enablement and a cross-arch fix/enablement change: - SGI/UV fix for older platforms - x32 signal handling fix - older x86 platform bootup APIC fix - AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS (Multiply Accumulation Single precision instructions) enablement. - move thread_info back into x86 specific code, to make life easier for other architectures trying to make use of CONFIG_THREAD_INFO_IN_TASK_STRUCT=y" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/smp: Don't try to poke disabled/non-existent APIC sched/core, x86: Make struct thread_info arch specific again x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi() x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features x86/vmware: Skip timer_irq_works() check on VMware -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull vmap stack fixes from Ingo Molnar: "This is fallout from CONFIG_HAVE_ARCH_VMAP_STACK=y on x86: stack accesses that used to be just somewhat questionable are now totally buggy. These changes try to do it without breaking the ABI: the fields are left there, they are just reporting zero, or reporting narrower information (the maps file change)" * 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm: Change vm_is_stack_for_task() to vm_is_stack_for_current() fs/proc: Stop trying to report thread stacks fs/proc: Stop reporting eip and esp in /proc/PID/stat mm/numa: Remove duplicated include from mprotect.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Mostly irqchip driver fixes, plus a symbol export" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/irq: Export irq_set_parent() irqchip/gic: Add missing \n to CPU IF adjustment message irqchip/jcore: Don't show Kconfig menu item for driver irqchip/eznps: Drop pointless static qualifier in nps400_of_init() irqchip/gic-v3-its: Fix entry size mask for GITS_BASER irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accesses
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "Add Ard Biesheuvel as EFI co-maintainer, plus fix an ARM build bug with older toolchains" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm: Fix absolute relocation detection for older toolchains MAINTAINERS: Add myself as EFI maintainer
-
Ville Syrjälä authored
Apparently trying to poke a disabled or non-existent APIC leads to a box that doesn't even boot. Let's not do that. No real clue if this is the right fix, but at least my P3 machine boots again. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: dyoung@redhat.com Cc: kexec@lists.infradead.org Cc: stable@vger.kernel.org Fixes: 2a51fe08 ("arch/x86: Handle non enumerated CPU after physical hotplug") Link: http://lkml.kernel.org/r/1477102684-5092-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Prevent unlikely crash in copro_calculate_slb() (Frederic Barrat) - cxl: Prevent adapter reset if an active context exists (Vaibhav Jain) Fixes for code merged this cycle: - Fix boot on systems with uncompressed kernel image (Heiner Kallweit) - Drop dump_numa_memory_topology() (Michael Ellerman) - Fix numa topology console print (Aneesh Kumar K.V) - Ignore the pkey system calls for now (Stephen Rothwell)" * tag 'powerpc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Ignore the pkey system calls for now powerpc: Fix numa topology console print powerpc/mm: Drop dump_numa_memory_topology() cxl: Prevent adapter reset if an active context exists powerpc/boot: Fix boot on systems with uncompressed kernel image powerpc/mm: Prevent unlikely crash in copro_calculate_slb()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - avoid livelock when walking guest page tables - fix HYP mode static keys without CC_HAVE_ASM_GOTO MIPS: - fix a build error without TRACEPOINTS_ENABLED s390: - reject a malformed userspace configuration x86: - suppress a warning without CONFIG_CPU_FREQ - initialize whole irq_eoi array" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Map the BSS at HYP arm64: KVM: Take S1 walks into account when determining S2 write faults KVM: s390: reject invalid modes for runtime instrumentation kvm: x86: memset whole irq_eoi kvm/x86: Fix unused variable warning in kvm_timer_init() KVM: MIPS: Add missing uaccess.h include
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "Just two bugfixes this time: Stable bugfix: - Fix last_write_offset incorrectly set to page boundary Other bugfix: - Fix missing-braces warning" * tag 'nfs-for-4.9-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: nfs4: fix missing-braces warning pnfs/blocklayout: fix last_write_offset incorrectly set to page boundary
-
- 21 Oct, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix an issue related to system resume in the new WDAT-based watchdog driver and a return value of a stub function in the ACPI CPPC framework. Specifics: - Update the ACPI WDAT-based watchdog driver to ping the hardware during system resume to prevent a reset from occurring after the resume is complete (Mika Westerberg). - Fix the return value of the pcc_mbox_request_channel() stub for CONFIG_PCC unset (Hoan Tran)" * tag 'acpi-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: watchdog: wdat_wdt: Ping the watchdog on resume mailbox: PCC: Fix return value of pcc_mbox_request_channel() -
Rafael J. Wysocki authored
* acpi-wdat: watchdog: wdat_wdt: Ping the watchdog on resume * acpi-cppc: mailbox: PCC: Fix return value of pcc_mbox_request_channel()
-
Thomas Gleixner authored
Merge tag 'gic-fixes-for-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull GIC updates from Marc Zyngier: - Fix for 32bit accesses that should be 64bit on 64bit machines - Fix for a field decoding macro - Beautify a warning message
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Five small fixes. Some of these, like the nested spinlock overwriting saved flags and the Kasan use after free look serious, but they seem not to have been picked up in testing or seen in the field. The biggest user visible issue is probably the wrong device handler for Clariion, which means that alua doesn't bind to the array like it should" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: Fix async error WARN_ON scsi: zfcp: spin_lock_irqsave() is not nestable scsi: Remove one useless stack variable scsi: Fix use-after-free scsi: Replace wrong device handler name for CLARiiON arrays
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A set of fixes that missed the merge window, mostly due to me being away around that time. Nothing major here, a mix of nvme cleanups and fixes, and one fix for the badblocks handling" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: use symbolic constants for CNS values nvme: use symbolic constants for CNS values nvme.h: add an enum for cns values nvme.h: don't use uuid_be nvme.h: resync with nvme-cli nvme: Add tertiary number to NVME_VS nvme : Add sysfs entry for NVMe CMBs when appropriate nvme: don't schedule multiple resets nvme: Delete created IO queues on reset nvme: Stop probing a removed device badblocks: fix overlapping check for clearing
-
