- 09 Jul, 2022 4 commits
-
-
Baowen Zheng authored
TCP packets will be dropped if the segments number in the tx skb exceeds limitation when sending iperf3 traffic with --zerocopy option. we make the following changes: Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from outside because it will be changed after skb_linearize operation. Fill maximum dma_len in first tx descriptor to make sure the whole head is included in the first descriptor. Fixes: c10d12e3 ("nfp: add support for NFDK data path") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Martin Blumenstingl says: ==================== selftests: forwarding: Install two missing tests For some distributions (e.g. OpenWrt) we don't want to rely on rsync to copy the tests to the target as some extra dependencies need to be installed. The Makefile in tools/testing/selftests/net/forwarding already installs most of the tests. This series adds the two missing tests to the list of installed tests. That way a downstream distribution can build a package using this Makefile (and add dependencies there as needed). ==================== Link: https://lore.kernel.org/r/20220707135532.1783925-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Martin Blumenstingl authored
When using the Makefile from tools/testing/selftests/net/forwarding/ all tests should be installed. Add no_forwarding.sh to the list of "to be installed tests" where it has been missing so far. Fixes: 476a4f05 ("selftests: forwarding: add a no_forwarding.sh test") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Martin Blumenstingl authored
When using the Makefile from tools/testing/selftests/net/forwarding/ all tests should be installed. Add local_termination.sh to the list of "to be installed tests" where it has been missing so far. Fixes: 90b9566a ("selftests: forwarding: add a test for local_termination.sh") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 08 Jul, 2022 20 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== bpf 2022-07-08 We've added 3 non-merge commits during the last 2 day(s) which contain a total of 7 files changed, 40 insertions(+), 24 deletions(-). The main changes are: 1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet. 2) Fix spurious packet loss in generic XDP when pushing packets out (note that native XDP is not affected by the issue), from Johan Almbladh. 3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before its set in stone as UAPI, from Joanne Koong. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs bpf: Make sure mac_header was set before using it xdp: Fix spurious packet loss in generic XDP TX path ==================== Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_table. A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. The first half of this series changes some proc handlers used in ipv4_table to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. Then, the second half adds READ_ONCE() to the other readers of ipv4_table. Changes: v2: * Drop some changes that makes backporting difficult * First cleanup patch * Lockless helpers and .proc_handler changes * Drop the tracing part for .sysctl_mem * Steve already posted a fix * Drop int-to-bool change for cipso * Should be posted to net-next later * Drop proc_dobool() change * Can be included in another series v1: https://lore.kernel.org/netdev/20220706052130.16368-1-kuniyu@amazon.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading sysctl_fib_sync_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race. Fixes: 9ab948a9 ("ipv4: Allow amount of dirty memory from fib resizing to be controllable") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading icmp sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 4cdf507d ("icmp: add a global rate limitation") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading cipso sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading .sysctl_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading inetpeer sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_max_orphans, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dointvec_jiffies() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_jiffies() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_doulongvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_doulongvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 61d9b56a ("sysctl: add unsigned int range support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dointvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steven Rostedt (Google) authored
The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer and then dereferences it in the TP_printk() portion. This is unsafe as the TP_printk() portion is executed at the time the buffer is read. That is, it can be seconds, minutes, days, months, even years later. If the proto is freed, then this dereference will can also lead to a kernel crash. Instead, save the sysctl_mem array into the ring buffer and have the TP_printk() reference that instead. This is the proper and safe way to read pointers in trace events. Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/ Cc: stable@vger.kernel.org Fixes: 3847ce32 ("core: add tracepoints for queueing skb to rcvbuf") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joanne Koong authored
Commit 13bbbfbe ("bpf: Add bpf_dynptr_read and bpf_dynptr_write") added the bpf_dynptr_write() and bpf_dynptr_read() APIs. However, it will be needed for some dynptr types to pass in flags as well (e.g. when writing to a skb, the user may like to invalidate the hash or recompute the checksum). This patch adds a "u64 flags" arg to the bpf_dynptr_read() and bpf_dynptr_write() APIs before their UAPI signature freezes where we then cannot change them anymore with a 5.19.x released kernel. Fixes: 13bbbfbe ("bpf: Add bpf_dynptr_read and bpf_dynptr_write") Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20220706232547.4016651-1-joannelkoong@gmail.com
-
Pavel Skripkin authored
Accidentally noticed, that this driver is the only user of while (time_after(jiffies...)). It looks like typo, because likely this while loop will finish after 1st iteration, because time_after() returns true when 1st argument _is after_ 2nd one. There is one possible problem with this poll loop: the scheduler could put the thread to sleep, and it does not get woken up for OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done its thing, but you exit the while loop and return -ETIMEDOUT. Fix it by using sane poll API that avoids all problems described above Fixes: 753a026c ("net: ocelot: add FDMA support") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-07-06 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Ring the TX doorbell on DMA errors net/mlx5e: Fix capability check for updating vnic env counters net/mlx5e: CT: Use own workqueue instead of mlx5e priv net/mlx5: Lag, correct get the port select mode str net/mlx5e: Fix enabling sriov while tc nic rules are offloaded net/mlx5e: kTLS, Fix build time constant test in RX net/mlx5e: kTLS, Fix build time constant test in TX net/mlx5: Lag, decouple FDB selection and shared FDB net/mlx5: TC, allow offload from uplink to other PF's VF ==================== Link: https://lore.kernel.org/r/20220706231309.38579-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Siddharth Vadapalli authored
Renaming interfaces using udevd depends on the interface being registered before its netdev is registered. Otherwise, udevd reads an empty phys_port_name value, resulting in the interface not being renamed. Fix this by registering the interface before registering its netdev by invoking am65_cpsw_nuss_register_devlink() before invoking register_netdev() for the interface. Move the function call to devlink_port_type_eth_set(), invoking it after register_netdev() is invoked, to ensure that netlink notification for the port state change is generated after the netdev is completely initialized. Fixes: 58356eb3 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jon Hunter authored
There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 07 Jul, 2022 14 commits
-
-
Eric Dumazet authored
Classic BPF has a way to load bytes starting from the mac header. Some skbs do not have a mac header, and skb_mac_header() in this case is returning a pointer that 65535 bytes after skb->head. Existing range check in bpf_internal_load_pointer_neg_helper() was properly kicking and no illegal access was happening. New sanity check in skb_mac_header() is firing, so we need to avoid it. WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 skb_mac_header include/linux/skbuff.h:2785 [inline] WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Modules linked in: CPU: 1 PID: 28990 Comm: syz-executor.0 Not tainted 5.19.0-rc4-syzkaller-00865-g4874fb94 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022 RIP: 0010:skb_mac_header include/linux/skbuff.h:2785 [inline] RIP: 0010:bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Code: ff ff 45 31 f6 e9 5a ff ff ff e8 aa 27 40 00 e9 3b ff ff ff e8 90 27 40 00 e9 df fe ff ff e8 86 27 40 00 eb 9e e8 2f 2c f3 ff <0f> 0b eb b1 e8 96 27 40 00 e9 79 fe ff ff 90 41 57 41 56 41 55 41 RSP: 0018:ffffc9000309f668 EFLAGS: 00010216 RAX: 0000000000000118 RBX: ffffffffffeff00c RCX: ffffc9000e417000 RDX: 0000000000040000 RSI: ffffffff81873f21 RDI: 0000000000000003 RBP: ffff8880842878c0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000001 R12: 0000000000000004 R13: ffff88803ac56c00 R14: 000000000000ffff R15: dffffc0000000000 FS: 00007f5c88a16700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdaa9f6c058 CR3: 000000003a82c000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_skb_load_helper_32 net/core/filter.c:276 [inline] bpf_skb_load_helper_32+0x191/0x220 net/core/filter.c:264 Fixes: f9aefd6b ("net: warn if mac header was not set") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220707123900.945305-1-edumazet@google.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter, can, and bluetooth. Current release - regressions: - bluetooth: fix deadlock on hci_power_on_sync Previous releases - regressions: - sched: act_police: allow 'continue' action offload - eth: usbnet: fix memory leak in error case - eth: ibmvnic: properly dispose of all skbs during a failover Previous releases - always broken: - bpf: - fix insufficient bounds propagation from adjust_scalar_min_max_vals - clear page contiguity bit when unmapping pool - netfilter: nft_set_pipapo: release elements in clone from abort path - mptcp: netlink: issue MP_PRIO signals from userspace PMs - can: - rcar_canfd: fix data transmission failed on R-Car V3U - gs_usb: gs_usb_open/close(): fix memory leak Misc: - add Wenjia as SMC maintainer" * tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) wireguard: Kconfig: select CRYPTO_CHACHA_S390 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations wireguard: selftests: use microvm on x86 wireguard: selftests: always call kernel makefile wireguard: selftests: use virt machine on m68k wireguard: selftests: set fake real time in init r8169: fix accessing unset transport header net: rose: fix UAF bug caused by rose_t0timer_expiry usbnet: fix memory leak in error case Revert "tls: rx: move counting TlsDecryptErrors for sync" mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy mptcp: fix local endpoint accounting selftests: mptcp: userspace PM support for MP_PRIO signals mptcp: netlink: issue MP_PRIO signals from userspace PMs mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags mptcp: Avoid acquiring PM lock for subflow priority changes mptcp: fix locking in mptcp_nl_cmd_sf_destroy() net/mlx5e: Fix matchall police parameters validation net/sched: act_police: allow 'continue' action offload net: lan966x: hardcode the number of external ports ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Tag Intel pin control as supported in MAINTAINERS - Fix a NULL pointer exception in the Aspeed driver - Correct some NAND functions in the Sunxi A83T driver - Use the right offset for some Sunxi pins - Fix a zero base offset in the Freescale (NXP) i.MX93 - Fix the IRQ support in the STM32 driver * tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stm32: fix optional IRQ support to gpios pinctrl: imx: Add the zero base flag for imx93 pinctrl: sunxi: sunxi_pconf_set: use correct offset pinctrl: sunxi: a83t: Fix NAND function name for some pins pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() MAINTAINERS: Update Intel pin control to Supported
-
Linus Torvalds authored
These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard patches for 5.19-rc6 1) A few small fixups to the selftests, per usual. Of particular note is a fix for a test flake that occurred on especially fast systems that boot in less than a second. 2) An addition during this cycle of some s390 crypto interacted with the way wireguard selects dependencies, resulting in linker errors reported by the kernel test robot. So Vladis sent in a patch for that, which also required a small preparatory fix moving some Kconfig symbols around. ==================== Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladis Dronov authored
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere. This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Heiner Kallweit authored
66e4c8d9 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed6 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug") Reported-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Duoming Zhou authored
There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Oliver Neukum authored
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 06 Jul, 2022 2 commits
-
-
Maxim Mikityanskiy authored
TX doorbells may be postponed, because sometimes the driver knows that another packet follows (for example, when xmit_more is true, or when a MPWQE session is closed before transmitting a packet). However, the DMA mapping may fail for the next packet, in which case a new WQE is not posted, the doorbell isn't updated either, and the transmission of the previous packet will be delayed indefinitely. This commit fixes the described rare error flow by posting a NOP and ringing the doorbell on errors to flush all the previous packets. The MPWQE session is closed before that. DMA mapping in the MPWQE flow is moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions are not allowed. Stop room always has enough space for a NOP, because the actual TX WQE is not posted. Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Gal Pressman authored
The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported. Fix that by checking whether any counter is supported instead of only the steering counter capability. Fixes: 0cfafd4b ("net/mlx5e: Add device out of buffer counter") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-