- 11 Aug, 2017 35 commits
-
-
Gregory CLEMENT authored
commit d7a65c49 upstream. The number of pins in South Bridge is 30 and not 29. There is a fix for the driver for the pinctrl, but a fix is also need at device tree level for the GPIO. Fixes: afda007f ("ARM64: dts: marvell: Add pinctrl nodes for Armada 3700") Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suravee Suthikulpanit authored
commit efe6f241 upstream. IRTE[GALogIntr] bit should set when enabling guest_mode, which enables IOMMU to generate entry in GALog when IRTE[IsRun] is not set, and send an interrupt to notify IOMMU driver. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Fixes: d98de49a ('iommu/amd: Enable vAPIC interrupt remapping mode by default') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Nicholas Piggin authored
commit 3db40c31 upstream. If the decrementer wraps again and de-asserts the decrementer exception while hard-disabled, __check_irq_replay() has a test to notice the wrap when interrupts are re-enabled. The decrementer check must be done when clearing the PACA_IRQ_HARD_DIS flag, not when the PACA_IRQ_DEC flag is tested. Previously this worked because the decrementer interrupt was always the first one checked after clearing the hard disable flag, but HMI check was moved ahead of that, which introduced this bug. This can cause a missed decrementer interrupt if we soft-disable interrupts then take an HMI which is recorded in irq_happened, then hard-disable interrupts for > 4s to wrap the decrementer. Fixes: e0e0d6b7 ("powerpc/64: Replay hypervisor maintenance interrupt first") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Gustavo Romero authored
commit cd63f3cf upstream. Currently flush_tmregs_to_thread() does not save the TM SPRs (TFHAR, TFIAR, TEXASR) to the thread struct, unless the process is currently inside a suspended transaction. If the process is core dumping, and the TM SPRs have changed since the last time the process was context switched, then we will save stale values of the TM SPRs to the core dump. Fix it by saving the live register state to the thread struct in that case. Fixes: 08e1c01d ("powerpc/ptrace: Enable support for TM SPR state") Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Reviewed-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Matija Glavinic Pecotic authored
commit 34f41c03 upstream. For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit unsigned int, there is an overflow on unsigned int right-hand side of the expression which results with wrong values being returned. Type cast the multiplier to 64bit to avoid that issue. Fixes: 46c8f0b0 ("timers: Fix get_next_timer_interrupt() computation") Signed-off-by:
Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: khilman@baylibre.com Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.comSigned-off-by:
-
Wanpeng Li authored
commit 337c017c upstream. WARNING: CPU: 5 PID: 1242 at kernel/rcu/tree_plugin.h:323 rcu_note_context_switch+0x207/0x6b0 CPU: 5 PID: 1242 Comm: unity-settings- Not tainted 4.13.0-rc2+ #1 RIP: 0010:rcu_note_context_switch+0x207/0x6b0 Call Trace: __schedule+0xda/0xba0 ? kvm_async_pf_task_wait+0x1b2/0x270 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 RIP: 0010:__d_lookup_rcu+0x90/0x1e0 I encounter this when trying to stress the async page fault in L1 guest w/ L2 guests running. Commit 9b132fbe (Add rcu user eqs exception hooks for async page fault) adds rcu_irq_enter/exit() to kvm_async_pf_task_wait() to exit cpu idle eqs when needed, to protect the code that needs use rcu. However, we need to call the pair even if the function calls schedule(), as seen from the above backtrace. This patch fixes it by informing the RCU subsystem exit/enter the irq towards/away from idle for both n.halted and !n.halted. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Suzuki K Poulose authored
commit 7e5a6722 upstream. The mmu_notifier_release() callback of KVM triggers cleaning up the stage2 page table on kvm-arm. However there could be other notifier callbacks in parallel with the mmu_notifier_release(), which could cause the call backs ending up in an empty stage2 page table. Make sure we check it for all the notifier callbacks. Fixes: commit 293f2936 ("kvm-arm: Unmap shadow pagetables properly") Reported-by:
Alex Graf <agraf@suse.de> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Banajit Goswami authored
commit b1cd2e34 upstream. Multiple frontend dailinks may be connected to a backend dailink at the same time. When one of frontend dailinks is closed, the associated backend dailink should not be closed if it is connected to other active frontend dailinks. Change ensures that backend dailink is closed only after all connected frontend dailinks are closed. Signed-off-by:
Gopikrishnaiah Anandan <agopik@codeaurora.org> Signed-off-by:
Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
Patrick Lai <plai@codeaurora.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 651e9268 upstream. This reverts commit f1013cde ("ASoC: ux500: drop platform DAI assignments"), which seems to have been based on a misunderstanding and prevents the platform driver callbacks from being made (e.g. to preallocate DMA memory). The real culprit for the warnings about attempts to create duplicate procfs entries was commit 99b04f4c ("ASoC: add Component level pcm_new/pcm_free" that broke PCM creation on systems that use more than one platform component. Fixes: f1013cde ("ASoC: ux500: drop platform DAI assignments") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
-
Johan Hovold authored
commit c641e5b2 upstream. This reverts commit 99b04f4c ("ASoC: add Component level pcm_new/pcm_free"), which started calling the pcm_new callback for every component in a *card* when creating a new pcm, something which does not seem to make any sense. This specifically led to memory leaks in systems with more than one platform component and where DMA memory is allocated in the platform-driver callback. For example, when both mcasp devices are being used on an am335x board, DMA memory would be allocated twice for every DAI link during probe. When CONFIG_SND_VERBOSE_PROCFS was set this fortunately also led to warnings such as: WARNING: CPU: 0 PID: 565 at ../fs/proc/generic.c:346 proc_register+0x110/0x154 proc_dir_entry 'sub0/prealloc' already registered Since there seems to be no users of the new component callbacks, and the current implementation introduced a regression, let's revert the offending commit for now. Fixes: 99b04f4c ("ASoC: add Component level pcm_new/pcm_free") Signed-off-by:
-
Jean Delvare authored
commit 5694785c upstream. As I was staring at the si_init_golden_registers code, I noticed that the Pitcairn initialization silently falls through the Cape Verde initialization, and the Oland initialization falls through the Hainan initialization. However there is no comment stating that this is intentional, and the radeon driver doesn't have any such fallthrough, so I suspect this is not supposed to happen. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 62a37553 ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Marek Olšák" <maraeo@gmail.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Flora Cui <Flora.Cui@amd.com> Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit c471e70b upstream. This got missed when we open sourced this. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Sergei A. Trusov authored
commit 3f3c3714 upstream. Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly. Tested-by:
Dmitriy <mexx400@yandex.ru> Signed-off-by:
Sergei A. Trusov <sergei.a.trusov@ya.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jan Kara authored
commit 19ec8e48 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of ocfs2_set_acl() into ocfs2_iop_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Also posix_acl_chmod() that is calling ocfs2_set_acl() takes care of updating mode itself. Fixes: 07393101 ("posix_acl: Clear SGID bit when setting file permissions") Link: http://lkml.kernel.org/r/20170801141252.19675-3-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dima Zavin authored
commit 89affbf5 upstream. In codepaths that use the begin/retry interface for reading mems_allowed_seq with irqs disabled, there exists a race condition that stalls the patch process after only modifying a subset of the static_branch call sites. This problem manifested itself as a deadlock in the slub allocator, inside get_any_partial. The loop reads mems_allowed_seq value (via read_mems_allowed_begin), performs the defrag operation, and then verifies the consistency of mem_allowed via the read_mems_allowed_retry and the cookie returned by xxx_begin. The issue here is that both begin and retry first check if cpusets are enabled via cpusets_enabled() static branch. This branch can be rewritted dynamically (via cpuset_inc) if a new cpuset is created. The x86 jump label code fully synchronizes across all CPUs for every entry it rewrites. If it rewrites only one of the callsites (specifically the one in read_mems_allowed_retry) and then waits for the smp_call_function(do_sync_core) to complete while a CPU is inside the begin/retry section with IRQs off and the mems_allowed value is changed, we can hang. This is because begin() will always return 0 (since it wasn't patched yet) while retry() will test the 0 against the actual value of the seq counter. The fix is to use two different static keys: one for begin (pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we first bump the pre_enable key to ensure that cpuset_mems_allowed_begin() always return a valid seqcount if are enabling cpusets. Similarly, when disabling cpusets via cpuset_dec(), we first ensure that callers of cpuset_mems_allowed_retry() will start ignoring the seqcount value before we let cpuset_mems_allowed_begin() return 0. The relevant stack traces of the two stuck threads: CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 #4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8817f9c28000 task.stack: ffffc9000ffa4000 RIP: smp_call_function_many+0x1f9/0x260 Call Trace: smp_call_function+0x3b/0x70 on_each_cpu+0x2f/0x90 text_poke_bp+0x87/0xd0 arch_jump_label_transform+0x93/0x100 __jump_label_update+0x77/0x90 jump_label_update+0xaa/0xc0 static_key_slow_inc+0x9e/0xb0 cpuset_css_online+0x70/0x2e0 online_css+0x2c/0xa0 cgroup_apply_control_enable+0x27f/0x3d0 cgroup_mkdir+0x2b7/0x420 kernfs_iop_mkdir+0x5a/0x80 vfs_mkdir+0xf6/0x1a0 SyS_mkdir+0xb7/0xe0 entry_SYSCALL_64_fastpath+0x18/0xad ... CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 #4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8818087c0000 task.stack: ffffc90000030000 RIP: int3+0x39/0x70 Call Trace: <#DB> ? ___slab_alloc+0x28b/0x5a0 <EOE> ? copy_process.part.40+0xf7/0x1de0 __slab_alloc.isra.80+0x54/0x90 copy_process.part.40+0xf7/0x1de0 copy_process.part.40+0xf7/0x1de0 kmem_cache_alloc_node+0x8a/0x280 copy_process.part.40+0xf7/0x1de0 _do_fork+0xe7/0x6c0 _raw_spin_unlock_irq+0x2d/0x60 trace_hardirqs_on_caller+0x136/0x1d0 entry_SYSCALL_64_fastpath+0x5/0xad do_syscall_64+0x27/0x350 SyS_clone+0x19/0x20 do_syscall_64+0x60/0x350 entry_SYSCALL64_slow_path+0x25/0x25 Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com Fixes: 46e700ab ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled") Signed-off-by:
Dima Zavin <dmitriyz@waymo.com> Reported-by:
Cliff Spradlin <cspradlin@waymo.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christopher Lameter <cl@linux.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Mike Rapoport authored
commit 5a18b64e upstream. There may still be threads waiting on event_wqh at the time the userfault file descriptor is closed. Flush the events wait-queue to prevent waiting threads from hanging. Link: http://lkml.kernel.org/r/1501398127-30419-1-git-send-email-rppt@linux.vnet.ibm.com Fixes: 9cd75c3c ("userfaultfd: non-cooperative: add ability to report non-PF events from uffd descriptor") Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Mike Rapoport authored
commit 9d95aa4b upstream. In the non-cooperative userfaultfd case, the process exit may race with outstanding mcopy_atomic called by the uffd monitor. Returning -ENOSPC instead of -EINVAL when mm is already gone will allow uffd monitor to distinguish this case from other error conditions. Unfortunately I overlooked userfaultfd_zeropage when updating userfaultd_copy(). Link: http://lkml.kernel.org/r/1501136819-21857-1-git-send-email-rppt@linux.vnet.ibm.com Fixes: 96333187 ("userfaultfd_copy: return -ENOSPC in case mm has gone") Signed-off-by:
-
Mike Rapoport authored
commit b2282371 upstream. When mremap is called with MREMAP_FIXED it unmaps memory at the destination address without notifying userfaultfd monitor. If the destination were registered with userfaultfd, the monitor has no way to distinguish between the old and new ranges and to properly relate the page faults that would occur in the destination region. Fixes: 897ab3e0 ("userfaultfd: non-cooperative: add event for memory unmaps") Link: http://lkml.kernel.org/r/1500276876-3350-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Daniel Jordan authored
commit 2be7cfed upstream. Commit 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") causes __get_user_pages to ignore certain errors from follow_hugetlb_page. After such error, __get_user_pages subsequently calls faultin_page on the same VMA and start address that follow_hugetlb_page failed on instead of returning the error immediately as it should. In follow_hugetlb_page, when hugetlb_fault returns a value covered under VM_FAULT_ERROR, follow_hugetlb_page returns it without setting nr_pages to 0 as __get_user_pages expects in this case, which causes the following to happen in __get_user_pages: the "while (nr_pages)" check succeeds, we skip the "if (!vma..." check because we got a VMA the last time around, we find no page with follow_page_mask, and we call faultin_page, which calls hugetlb_fault for the second time. This issue also slightly changes how __get_user_pages works. Before, it only returned error if it had made no progress (i = 0). But now, follow_hugetlb_page can clobber "i" with an error code since its new return path doesn't check for progress. So if "i" is nonzero before a failing call to follow_hugetlb_page, that indication of progress is lost and __get_user_pages can return error even if some pages were successfully pinned. To fix this, change follow_hugetlb_page so that it updates nr_pages, allowing __get_user_pages to fail immediately and restoring the "error only if no progress" behavior to __get_user_pages. Tested that __get_user_pages returns when expected on error from hugetlb_fault in follow_hugetlb_page. Fixes: 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") Link: http://lkml.kernel.org/r/1500406795-58462-1-git-send-email-daniel.m.jordan@oracle.comSigned-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by:
Punit Agrawal <punit.agrawal@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: James Morse <james.morse@arm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Mel Gorman authored
commit 3ea27719 upstream. Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
David Woods authored
commit 852ff5fe upstream. Using the device_property interfaces allows the dw_mmc driver to work on platforms which run on either device tree or ACPI. Signed-off-by:
David Woods <dwoods@mellanox.com> Reviewed-by:
Chris Metcalf <cmetcalf@mellanox.com> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
David Woods authored
commit 73a47a9b upstream. Using the device_property interfaces allows mmc drivers to work on platforms which run on either device tree or ACPI. Signed-off-by:
-
Ludovic Desroches authored
commit 7a1e3f14 upstream. When the device is non removable, the card detect signal is often used for another purpose i.e. muxed to another SoC peripheral or used as a GPIO. It could lead to wrong behaviors depending the default value of this signal if not muxed to the SDHCI controller. Fixes: bb5f8ea4 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit fd40559c upstream. The verifier is allocated on the stack, but the EXCHANGE_ID RPC call was changed to be asynchronous by commit 8d89bd70. If we interrrupt the call to rpc_wait_for_completion_task(), we can therefore end up transmitting random stack contents in lieu of the verifier. Fixes: 8d89bd70 ("NFS setup async exchange_id") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Arend Van Spriel authored
commit 5f5d0314 upstream. Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Fixes: 4d792895 ("brcmfmac: switch to new platform data") Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Tested-by:
Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Emmanuel Grumbach authored
commit 0b0f934e upstream. iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Reported-by:
Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 5c0338c6 upstream. The combination of WQ_UNBOUND and max_active == 1 used to imply ordered execution. After NUMA affinity 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues"), this is no longer true due to per-node worker pools. While the right way to create an ordered workqueue is alloc_ordered_workqueue(), the documentation has been misleading for a long time and people do use WQ_UNBOUND and max_active == 1 for ordered workqueues which can lead to subtle bugs which are very difficult to trigger. It's unlikely that we'd see noticeable performance impact by enforcing ordering on WQ_UNBOUND / max_active == 1 workqueues. Let's automatically set __WQ_ORDERED for those workqueues. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Christoph Hellwig <hch@infradead.org> Reported-by:
Alexei Potashnik <alexei@purestorage.com> Fixes: 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues") Signed-off-by:
-
Dan Carpenter authored
commit 59a5e266 upstream. My static checker complains that "devno" can be negative, meaning that we read before the start of the loop. I've looked at the code, and I think the warning is right. This come from /proc so it's root only or it would be quite a quite a serious bug. The call tree looks like this: proc_scsi_write() <- gets id and channel from simple_strtoul() -> scsi_add_single_device() <- calls shost->transportt->user_scan() -> ata_scsi_user_scan() -> ata_find_dev() Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Tejun Heo authored
commit 3c745417 upstream. While refactoring, f7b2814b ("cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()") broke error return value from the function. The return value from the last operation is always overridden to zero. Fix it. Signed-off-by:
-
Tejun Heo authored
commit 7af608e4 upstream. On subsystem registration, css_populate_dir() is not called on the new root css, so the interface files for the subsystem on cgrp_dfl_root aren't created on registration. This is a residue from the days when cgrp_dfl_root was used only as the parking spot for unused subsystems, which no longer is true as it's used as the root for cgroup2. This is often fine as later operations tend to create them as a part of mount (cgroup1) or subtree_control operations (cgroup2); however, it's not difficult to mount cgroup2 with the controller interface files missing as Waiman found out. Fix it by invoking css_populate_dir() on the root css on subsys registration. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit 61046727 upstream. Subsystem migration methods shouldn't be called for empty migrations. cgroup_migrate_execute() implements this guarantee by bailing early if there are no source css_sets. This used to be correct before a79a908f ("cgroup: introduce cgroup namespaces"), but no longer since the commit because css_sets can stay pinned without tasks in them. This caused cgroup_migrate_execute() call into cpuset migration methods with an empty cgroup_taskset. cpuset migration methods correctly assume that cgroup_taskset_first() never returns NULL; however, due to the bug, it can, leading to the following oops. Unable to handle kernel paging request for data at address 0x00000960 Faulting instruction address: 0xc0000000001d6868 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 14 PID: 16947 Comm: kworker/14:0 Tainted: G W 4.12.0-rc4-next-20170609 #2 Workqueue: events cpuset_hotplug_workfn task: c00000000ca60580 task.stack: c00000000c728000 NIP: c0000000001d6868 LR: c0000000001d6858 CTR: c0000000001d6810 REGS: c00000000c72b720 TRAP: 0300 Tainted: GW (4.12.0-rc4-next-20170609) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 44722422 XER: 20000000 CFAR: c000000000008710 DAR: 0000000000000960 DSISR: 40000000 SOFTE: 1 GPR00: c0000000001d6858 c00000000c72b9a0 c000000001536e00 0000000000000000 GPR04: c00000000c72b9c0 0000000000000000 c00000000c72bad0 c000000766367678 GPR08: c000000766366d10 c00000000c72b958 c000000001736e00 0000000000000000 GPR12: c0000000001d6810 c00000000e749300 c000000000123ef8 c000000775af4180 GPR16: 0000000000000000 0000000000000000 c00000075480e9c0 c00000075480e9e0 GPR20: c00000075480e8c0 0000000000000001 0000000000000000 c00000000c72ba20 GPR24: c00000000c72baa0 c00000000c72bac0 c000000001407248 c00000000c72ba20 GPR28: c00000000141fc80 c00000000c72bac0 c00000000c6bc790 0000000000000000 NIP [c0000000001d6868] cpuset_can_attach+0x58/0x1b0 LR [c0000000001d6858] cpuset_can_attach+0x48/0x1b0 Call Trace: [c00000000c72b9a0] [c0000000001d6858] cpuset_can_attach+0x48/0x1b0 (unreliable) [c00000000c72ba00] [c0000000001cbe80] cgroup_migrate_execute+0xb0/0x450 [c00000000c72ba80] [c0000000001d3754] cgroup_transfer_tasks+0x1c4/0x360 [c00000000c72bba0] [c0000000001d923c] cpuset_hotplug_workfn+0x86c/0xa20 [c00000000c72bca0] [c00000000011aa44] process_one_work+0x1e4/0x580 [c00000000c72bd30] [c00000000011ae78] worker_thread+0x98/0x5c0 [c00000000c72bdc0] [c000000000124058] kthread+0x168/0x1b0 [c00000000c72be30] [c00000000000b2e8] ret_from_kernel_thread+0x5c/0x74 Instruction dump: f821ffa1 7c7d1b78 60000000 60000000 38810020 7fa3eb78 3f42ffed 4bff4c25 60000000 3b5a0448 3d420020 eb610020 <e9230960> 7f43d378 e9290000 f92af200 ---[ end trace dcaaf98fb36d9e64 ]--- This patch fixes the bug by adding an explicit nr_tasks counter to cgroup_taskset and skipping calling the migration methods if the counter is zero. While at it, remove the now spurious check on no source css_sets. Signed-off-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Roman Gushchin <guro@fb.com> Fixes: a79a908f ("cgroup: introduce cgroup namespaces") Link: http://lkml.kernel.org/r/1497266622.15415.39.camel@abdul.in.ibm.comSigned-off-by:
-
Hans de Goede authored
commit dd242a08 upstream. At least on the UP board SBC both PWMs are enabled leading to us trying to add the same pwm_lookup twice, which leads to the following: [ 0.902224] list_add double add: new=ffffffffb8efd400, prev=ffffffffb8efd400, next=ffffffffb8eeede0. [ 0.912466] ------------[ cut here ]------------ [ 0.917624] kernel BUG at lib/list_debug.c:31! [ 0.922588] invalid opcode: 0000 [#1] SMP ... [ 1.027450] Call Trace: [ 1.030185] pwm_add_table+0x4c/0x90 [ 1.034181] bsw_pwm_setup+0x1a/0x20 [ 1.038175] acpi_lpss_create_device+0xfe/0x420 ... This commit fixes this by only calling pwm_add_table() for the first PWM controller (which is the one used for the backlight). Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458599 Fixes: bf7696a1 (acpi: lpss: call pwm_add_table() for BSW...) Fixes: 04434ab5 (ACPI / LPSS: Call pwm_add_table() for Bay Trail...) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit cd069bb9 upstream. When LPFC is built-in but NVMe is a loadable module, we fail to link the kernel: drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport': (.text+0x156a82): undefined reference to `nvme_fc_register_localport' drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport': (.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport' We can avoid this either by forcing lpfc to be a module, or by disabling NVMe support in this case. This implements the former. Fixes: 7d708033 ("scsi: lpfc: Finalize Kconfig options for nvme") Link: https://patchwork.kernel.org/patch/9636569/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
John David Anglin authored
commit 13d57093 upstream. In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG statement in flush_cache_range() during a system shutdown: kernel BUG at arch/parisc/kernel/cache.c:595! CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x144/0x148 IAOQ[1]: flush_cache_page+0x0/0x1a8 RP(r2): flush_cache_range+0xec/0x148 Backtrace: [<00000000402910ac>] unmap_page_range+0x84/0x880 [<00000000402918f4>] unmap_single_vma+0x4c/0x60 [<0000000040291a18>] zap_page_range_single+0x110/0x160 [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8 [<000000004026ccd8>] truncate_pagecache+0x50/0xa8 [<000000004026cd84>] truncate_setsize+0x54/0x70 [<000000004033d534>] put_aio_ring_file+0x44/0xb0 [<000000004033d5d8>] aio_free_ring+0x38/0x140 [<000000004033d714>] free_ioctx+0x34/0xa8 [<00000000401b0028>] process_one_work+0x1b8/0x4d0 [<00000000401b04f4>] worker_thread+0x1b4/0x648 [<00000000401b9128>] kthread+0x1b0/0x208 [<0000000040150020>] end_fault_vector+0x20/0x28 [<0000000040639518>] nf_ip_reroute+0x50/0xa8 [<0000000040638ed0>] nf_ip_route+0x10/0x78 [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8 CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx Backtrace: [<0000000040163bf0>] show_stack+0x20/0x38 [<0000000040688480>] dump_stack+0xa8/0x120 [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0 [<0000000040164d0c>] handle_interruption+0xa24/0xa48 This patch modifies flush_cache_range() to handle non current contexts. In as much as this occurs infrequently, the simplest approach is to flush the entire cache when this happens. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 8f8201df upstream. Since kernel 4.11 the thread and irq stacks on parisc randomly overflow the default size of 16k. The reason why stack usage suddenly grew is yet unknown. Signed-off-by:
-
- 06 Aug, 2017 5 commits
-
-
Greg Kroah-Hartman authored
-
Chris Brandt authored
commit 9c284c41 upstream. The existing code gives an incorrect pointer value. The buffer pointer 'buf' was of type unsigned short *, and 'count' was a number in bytes. A cast of buf should have been used. However, instead of casting, just change the code to use u32 pointers. Reported-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
commit 49d31c2f upstream. take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
commit 860f01e9 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
