- 06 Jun, 2014 37 commits
-
-
Boris BREZILLON authored
sam9x5 SoCs have the following errata: "RTC: Interrupt Mask Register cannot be used Interrupt Mask Register read always returns 0." Hence we should not rely on what IMR claims about already masked IRQs and just disable all IRQs. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by:
Bryan Evenson <bevenson@melinkcorp.com> Reviewed-by:
Johan Hovold <johan@hovold.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Roszko <mark.roszko@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Boris BREZILLON authored
The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by:
-
Heiko Stuebner authored
This enables the setting of a custom clock name for the clock provided by the hym8563 rtc. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Mike Frysinger authored
The RTC framework does not let you return an error once a call to devm_rtc_device_register has succeeded. Avoid doing that when the IRQ request fails as we can still support reading/writing the clock without the IRQ. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Reported-by:
Ales Novak <alnovak@suse.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Sekhar Nori authored
Newer versions of OMAP RTC IP such as those found in AM335x and DRA7x need an explicit enable of 32khz functional clock which ticks the RTC. AM335x support was working so far because of settings done in U-Boot. However, the DRA7x U-Boot does no such enable of 32khz clock and this patch is need to get the RTC to work on DRA7x at least. In general, it is better to not depend on settings done in U-Boot. Thanks to Lokesh Vutla for noticing this. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
-
Sekhar Nori authored
Use BIT() macro for RTC_HAS_<FEATURE> defines instead of hand-writing bit masks. Use BIT() macros for register bit field definitions. While at it, fix indentation done using spaces. No functional change in this patch. Signed-off-by:
-
Sekhar Nori authored
Remove multiple superfluous device id checks. Since an id_table is present in the driver probe() should never encounter an empty device id entry. In case of OF style match, of_match_device() returns an matching entry. For paranoia sake, check for device id entry once and fail probe() if none is found. This is much better than checking for it multiple times. Signed-off-by:
-
Opensource [Steve Twiss] authored
Add the RTC driver for DA9063. [akpm@linux-foundation.org: coding-style tweaks] Signed-off-by:
Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Dajun Chen <david.chen@diasemi.com> Signed-off-by:
-
Josef Gajdusek authored
Add driver for SPI RTC Microchip MCP795. Only supports saving/loading time from the chip (i. e. no alarms/power events/ID). Signed-off-by:
Josef Gajdusek <atx@atx.name> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Raghavendra Ganiga authored
Avoid the potential race condition by avoiding bailing out of driver in probe after registering with rtc subsystem Also the set_alarm , read_alarm and alarm_irq_enable returns error if irq registration fails in probe. Also the sysfs will not create entry for alarm if irq registration fails in probe. Signed-off-by:
Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Acked-by:
-
Raghavendra Ganiga authored
Fix the following build errors reported by kbuild test robot by selecting REGMAP_SPI in Kconfig file drivers/built-in.o: In function `ds1343_probe': rtc-ds1343.c:(.text+0x1baf8f): undefined reference to `devm_regmap_init_spi' Signed-off-by:
-
Raghavendra Ganiga authored
Signed-off-by:
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by:
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by:
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by:
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by:
-
Anthony Olech authored
Setting the alarm to a time not on a minute boundary results in repeated interrupts being generated by the DA9052/3 PMIC device until the kernel RTC core sees that the alarm has rung. Sometimes the number and frequency of interrupts can cause the kernel to disable the IRQ line used by the DA9052/3 PMIC with disasterous consequences. This patch fixes the problem. Even though the DA9052/3 PMIC is capable generating periodic interrupts, ie TICKS, the method used to distinguish RTC_AF from RTC_PF events was flawed and can not work in conjunction with the regmap_irq kernel core. Thus that flawed detection has also been removed by the DA9052/3 PMIC RTC driver's irq handler, so that it no longer reports the wrong type of event to the kernel RTC core. The internal static functions within the DA9052/3 PMIC RTC driver have been changed to pass the 'da9052_rtc' structure instead of the 'da9052' because there is no backwards pointer from the 'da9052' structure. This patch fixes the three issues described above. The first is serious because usiing the RTC alarm set to a non minute boundary will eventually cause all component drivers that depend on the interrupt line to fail. The solution adopted is to round up to alarm time to the next highest minute. The second bug, reporting a RTC_PF event instead of an RTC_AF event turns out to not matter with the current implementation of the kernel RTC core as it seems to ignore the event type. However, should that change in the future it is better to fix the issue now and not have 'problems waiting to happen' The third set of changes are to make the da9052_rtc structure available to all the local internal functions in the driver. This was done during testing so that diagnostic data could be stored there. Should the solution to the first issue be found not acceptable, then the alternative of using the TICKS interrupt at the fixed one second interval in order to step to the exact second of the requested alarm requires an extra (alarm time) piece of data to be stored. In devices that use the alarm function to wake up from sleep, accuracy to the second will result in the device being awake for up to nearly a minute longer than expected. Signed-off-by:
Anthony Olech <anthony.olech.opensource@diasemi.com> Cc: David Dajun Chen <dchen@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Krzysztof Kozlowski authored
Add missing of_node_put() to decrement the reference count. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
-
Krzysztof Kozlowski authored
Use of_get_child_by_name() to obtain reference to charger node instead of of_find_node_by_name() which can walk outside of the parent node. Signed-off-by:
-
Maciej W. Rozycki authored
This adds an RTC platform device for DECstation systems so that they can use the rtc-cmos driver for their RTC device. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
This brings in drivers/char/rtc.c functionality required for DECstation and, should the maintainers decide to switch, Alpha systems to use rtc-cmos. Specifically these features are made available: * RTC iomem rather than x86/PCI port I/O mapping, controlled with the RTC_IOMAPPED macro as with the original driver. The DS1287A chip in all DECstation systems is mapped in the host bus address space as a contiguous block of 64 32-bit words of which the least significant byte accesses the RTC chip for both reads and writes. All the address and data window register accesses are made transparently by the chipset glue logic so that the device appears directly mapped on the host bus. * A way to set the size of the address space explicitly with the newly-added `address_space' member of the platform part of the RTC device structure. This avoids the unreliable heuristics that does not work in a setup where the RTC is not explicitly accessed with the usual address and data window register pair. * The ability to use the RTC periodic interrupt as a system clock device, which is implemented by arch/mips/kernel/cevt-ds1287.c for DECstation systems and takes the RTC interrupt away from the RTC driver. Eventually hooking back to the clock device's interrupt handler should be possible for the purpose of the alarm clock and possibly also update-in-progress interrupt, but this is not done by this change. o To avoid interfering with the clock interrupt all the places where the RTC interrupt mask is fiddled with are only executed if and IRQ has been assigned to the RTC driver. o To avoid changing the clock setup Register A is not fiddled with if CMOS_RTC_FLAGS_NOFREQ is set in the newly-added `flags' member of the platform part of the RTC device structure. Originally, in drivers/char/rtc.c, this was keyed with the absence of the RTC interrupt, just like the interrupt mask, but there only the periodic interrupt frequency is set, whereas rtc-cmos also sets the divider bits. Therefore a new flag is introduced so that systems where the RTC interrupt is not usable rather than used as a system clock device can fully initialise the RTC. * A small clean-up is made to the IRQ assignment code that makes the IRQ number hardcoded to -1 rather than arbitrary -ENXIO (or whatever error happens to be returned by platform_get_irq) where no IRQ has been assigned to the RTC driver (NO_IRQ might be another candidate, but it looks like this macro has inconsistent or missing definitions and limited use and might therefore be unsafe). Verified to work correctly with a DECstation 5000/240 system. [akpm@linux-foundation.org: fix weird code layout] Signed-off-by: -
Lee, Chun-Yi authored
Compared source code of rtc-lib.c::rtc_year_days() with efirtc.c::rtc_year_days(), found the code in rtc-efi decreases value of day twice when it computing year days. rtc-lib.c::rtc_year_days() has already decrease days and return the year days from 0 to 365. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa@sang-engineering.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Wolfram Sang authored
Don't replace the value we got from the I2C layer, just pass it on. Signed-off-by:
-
Wolfram Sang authored
There is no cleanup needed when something fails in probe, so no need for goto. Directly return when something fails. Signed-off-by:
-
Wolfram Sang authored
History is in git, no need for sperate versioning. Also remove the success printout, RTC core does it, too. Signed-off-by:
-
Loc Ho authored
This patch adds APM X-Gene SoC RTC DTS entry Signed-off-by:
Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by:
Loc Ho <lho@apm.com> Cc: Jon Masters <jcm@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Loc Ho authored
Add support for the APM X-Gene SoC RTC driver. Signed-off-by:
-
Loc Ho authored
Signed-off-by:
-
Ales Novak authored
In __rtc_read_alarm(), if the alarm time retrieved by rtc_read_alarm_internal() from the device contains invalid values (e.g. month=2,mday=31) and the year not set (=-1), the initialization will loop infinitely because the year-fixing loop expects the time being invalid due to leap year. Fix reduces the loop to the leap years and adds final validity check. Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
-
Fabian Frederick authored
Replace seq_printf where possible. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Sage Weil <sage@inktank.com> Signed-off-by:
-
Fabian Frederick authored
Update the last pr_warning callsites in fs branch Signed-off-by:
-
Joonsoo Kim authored
Currently, if allocation constraint to node is NUMA_NO_NODE, we search a partial slab on numa_node_id() node. This doesn't work properly on a system having memoryless nodes, since it can have no memory on that node so there must be no partial slab on that node. On that node, page allocation always falls back to numa_mem_id() first. So searching a partial slab on numa_node_id() in that case is the proper solution for the memoryless node case. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Han Pingtian <hanpt@linux.vnet.ibm.com> Signed-off-by:
-
Johannes Weiner authored
When kswapd exits, it can end up taking locks that were previously held by allocating tasks while they waited for reclaim. Lockdep currently warns about this: On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote: > inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage. > kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130 > {RECLAIM_FS-ON-W} state was registered at: > mark_held_locks+0xb9/0x140 > lockdep_trace_alloc+0x7a/0xe0 > kmem_cache_alloc_trace+0x37/0x240 > flex_array_alloc+0x99/0x1a0 > cgroup_attach_task+0x63/0x430 > attach_task_by_pid+0x210/0x280 > cgroup_procs_write+0x16/0x20 > cgroup_file_write+0x120/0x2c0 > vfs_write+0xc0/0x1f0 > SyS_write+0x4c/0xa0 > tracesys+0xdd/0xe2 > irq event stamp: 49 > hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70 > hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0 > softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0 > softirqs last disabled at (0): (null) > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(&sig->group_rwsem); > <Interrupt> > lock(&sig->group_rwsem); > > *** DEADLOCK *** > > no locks held by kswapd2/1151. > > stack backtrace: > CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4 > Call Trace: > dump_stack+0x19/0x1b > print_usage_bug+0x1f7/0x208 > mark_lock+0x21d/0x2a0 > __lock_acquire+0x52a/0xb60 > lock_acquire+0xa2/0x140 > down_read+0x51/0xa0 > exit_signals+0x24/0x130 > do_exit+0xb5/0xa50 > kthread+0xdb/0x100 > ret_from_fork+0x7c/0xb0 This is because the kswapd thread is still marked as a reclaimer at the time of exit. But because it is exiting, nobody is actually waiting on it to make reclaim progress anymore, and it's nothing but a regular thread at this point. Be tidy and strip it of all its powers (PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state) before returning from the thread function. Signed-off-by:Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: - Optimised assembly string/memory routines (based on the AArch64 Cortex Strings library contributed to glibc but re-licensed under GPLv2) - Optimised crypto algorithms making use of the ARMv8 crypto extensions (together with kernel API for using FPSIMD instructions in interrupt context) - Ftrace support - CPU topology parsing from DT - ESR_EL1 (Exception Syndrome Register) exposed to user space signal handlers for SIGSEGV/SIGBUS (useful to emulation tools like Qemu) - 1GB section linear mapping if applicable - Barriers usage clean-up - Default pgprot clean-up Conflicts as per Catalin. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (57 commits) arm64: kernel: initialize broadcast hrtimer based clock event device arm64: ftrace: Add system call tracepoint arm64: ftrace: Add CALLER_ADDRx macros arm64: ftrace: Add dynamic ftrace support arm64: Add ftrace support ftrace: Add arm64 support to recordmcount arm64: Add 'notrace' attribute to unwind_frame() for ftrace arm64: add __ASSEMBLY__ in asm/insn.h arm64: Fix linker script entry point arm64: lib: Implement optimized string length routines arm64: lib: Implement optimized string compare routines arm64: lib: Implement optimized memcmp routine arm64: lib: Implement optimized memset routine arm64: lib: Implement optimized memmove routine arm64: lib: Implement optimized memcpy routine arm64: defconfig: enable a few more common/useful options in defconfig ftrace: Make CALLER_ADDRx macros more generic arm64: Fix deadlock scenario with smp_send_stop() arm64: Fix machine_shutdown() definition arm64: Support arch_irq_work_raise() via self IPIs ...
-
Linus Torvalds authored
Russell King points out that my ARM merge (commit eb3d3ec5) was broken wrt the arch/arm/mach-mvebu/board-v7.c file, leaving in a stale l2x0_of_init() call (it's now handled by the DT description). Which is kind of embarrassing, since I knew about it as it wasn't the only file that had similar merge issues. At least I got the other ones right. Reported-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
- 05 Jun, 2014 3 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze updates from Michal Simek: - cleanup PCI and DMA handling - use generic device.h - some cleanups * tag 'microblaze-3.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix typo in head.S s/substract/subtract/ microblaze: remove check for CONFIG_XILINX_CONSOLE microblaze: Use generic device.h microblaze: Do not setup empty unmap_sg function microblaze: Remove device_to_mask microblaze: Clean device dma_ops structure microblaze: Cleanup PCI_DRAM_OFFSET handling microblaze: Do not setup pci_dma_ops microblaze: Return default dma operations microblaze: Enable SERIAL_OF_PLATFORM
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King: - Major clean-up of the L2 cache support code. The existing mess was becoming rather unmaintainable through all the additions that others have done over time. This turns it into a much nicer structure, and implements a few performance improvements as well. - Clean up some of the CP15 control register tweaks for alignment support, moving some code and data into alignment.c - DMA properties for ARM, from Santosh and reviewed by DT people. This adds DT properties to specify bus translations we can't discover automatically, and to indicate whether devices are coherent. - Hibernation support for ARM - Make ftrace work with read-only text in modules - add suspend support for PJ4B CPUs - rework interrupt masking for undefined instruction handling, which allows us to enable interrupts earlier in the handling of these exceptions. - support for big endian page tables - fix stacktrace support to exclude stacktrace functions from the trace, and add save_stack_trace_regs() implementation so that kprobes can record stack traces. - Add support for the Cortex-A17 CPU. - Remove last vestiges of ARM710 support. - Removal of ARM "meminfo" structure, finally converting us solely to memblock to handle the early memory initialisation. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits) ARM: ensure C page table setup code follows assembly code (part II) ARM: ensure C page table setup code follows assembly code ARM: consolidate last remaining open-coded alignment trap enable ARM: remove global cr_no_alignment ARM: remove CPU_CP15 conditional from alignment.c ARM: remove unused adjust_cr() function ARM: move "noalign" command line option to alignment.c ARM: provide common method to clear bits in CPU control register ARM: 8025/1: Get rid of meminfo ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type ARM: 8066/1: correction for ARM patch 8031/2 ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction ARM: 8047/1: rwsem: use asm-generic rwsem implementation ARM: l2c: trial at enabling some Cortex-A9 optimisations ARM: l2c: add warnings for stuff modifying aux_ctrl register values ARM: l2c: print a warning with L2C-310 caches if the cache size is modified ARM: l2c: remove old .set_debug method ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this ...
-
Linus Torvalds authored
Merge branch 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull ARM64 EFI update from Peter Anvin: "By agreement with the ARM64 EFI maintainers, we have agreed to make -tip the upstream for all EFI patches. That is why this patchset comes from me :) This patchset enables EFI stub support for ARM64, like we already have on x86" * 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: efi: only attempt efi map setup if booting via EFI efi/arm64: ignore dtb= when UEFI SecureBoot is enabled doc: arm64: add description of EFI stub support arm64: efi: add EFI stub doc: arm: add UEFI support documentation arm64: add EFI runtime services efi: Add shared FDT related functions for ARM/ARM64 arm64: Add function to create identity mappings efi: add helper function to get UEFI params from FDT doc: efi-stub.txt updates for ARM lib: add fdt_empty_tree.c
-
![Opensource [Steve Twiss]'s avatar](https://secure.gravatar.com/avatar/8bfdd5af09bcb6e4ec372c6dcf8f4491?s=80&d=identicon "Opensource [Steve Twiss]")
