- 16 Jan, 2013 29 commits
-
-
Timo Teräs authored
After commit 6f0333b8 ("r8169: use 50% less ram for RX ring") the rx ring buffers are always copied making dirty_rx useless. Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
v4: hold rtnl lock for the whole netpoll_setup() v3: remove the comment v2: use RCU read lock This patch fixes the following warning: [ 72.013864] RTNL: assertion failed at net/core/dev.c (4955) [ 72.017758] Pid: 668, comm: netpoll-prep-v6 Not tainted 3.8.0-rc1+ #474 [ 72.019582] Call Trace: [ 72.020295] [<ffffffff8176653d>] netdev_master_upper_dev_get+0x35/0x58 [ 72.022545] [<ffffffff81784edd>] netpoll_setup+0x61/0x340 [ 72.024846] [<ffffffff815d837e>] store_enabled+0x82/0xc3 [ 72.027466] [<ffffffff815d7e51>] netconsole_target_attr_store+0x35/0x37 [ 72.029348] [<ffffffff811c3479>] configfs_write_file+0xe2/0x10c [ 72.030959] [<ffffffff8115d239>] vfs_write+0xaf/0xf6 [ 72.032359] [<ffffffff81978a05>] ? sysret_check+0x22/0x5d [ 72.033824] [<ffffffff8115d453>] sys_write+0x5c/0x84 [ 72.035328] [<ffffffff819789d9>] system_call_fastpath+0x16/0x1b In case of other races, hold rtnl lock for the entire netpoll_setup() function. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Stephen Hemminger authored
The VMXNET3 device provides RSS hash value for received packets, but it is not being used. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Stephen Hemminger authored
Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device for more predictable testing. This is already done on most hardware drivers. Initial key value just some arbitrary bits extracted once from /dev/random. Signed-off-by:
-
Stephen Hemminger authored
This static variable is never set, it initializes to 0 which is VMXNET3_INTR_BUDDYSHARE, and never changes. Signed-off-by:
-
Stephen Hemminger authored
An atomic counter of devices present is maintained but never used. Signed-off-by:
-
Stephen Hemminger authored
Defined but never used. Signed-off-by:
-
Stephen Hemminger authored
Use the standard netdev_xxx() and dev_xxx() wrappers to format log messages. Signed-off-by:
-
Stephen Hemminger authored
Use netdev_dbg() rather than dev_dbg() because the former prints the device name which is more useful than the pci name. Signed-off-by:
-
Stephen Hemminger authored
This messages that occur during boot time from this device when netdev_err is called before calling register_netdevice(). Switch to using dev_XXX macros which correlate message with PCI info which is available. Rather than fixing the features message, just remove it since the information is redundant and available through ethtool. Signed-off-by:
-
Stephen Hemminger authored
The uncommitted[] array was set but never used except in a debug message. Remove it. Signed-off-by:
-
Stephen Hemminger authored
Use netdev_alloc_skb_align, rather than open code using dev_alloc_skb. Change allocation at startup to use GFP_KERNEL. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to e1000e only. v2- updates patch 09/15 "e1000e: resolve checkpatch PREFER_PR_LEVEL warning" based on feedback from Joe Perches. ==================== Signed-off-by: -
Bruce Allan authored
Cleanup a set of conditional tests. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
The removed code block is duplicated in e1000e_write_itr() so use that instead. Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Bruce Allan authored
rx_long_byte_count can be removed since it is duplicated in rx_bytes Signed-off-by:
-
Bruce Allan authored
WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... v2 - remove unnecessary "e1000e:" prefix as pointed out by Joe Perches since that produces a redundant "e1000e:" in the log message Cc: Joe Perches <joe@perches.com> Signed-off-by: -
Bruce Allan authored
...discovered during code inspection. Signed-off-by:
-
Bruce Allan authored
When there is heavy traffic and the cable is pulled, the driver must reset the adapter to flush the Tx queue in hardware. This causes the reset path to be scheduled and logs the message "Reset adapter" which could be mis- interpreted as an error by the user. Change how the reset path is invoked for this scenario by using the same method done in an existing work-around for 80003es2lan (i.e. set a flag and if the flag is set in the reset code do not log the "Reset adapter" message since the reset is expected). Re-name the FLAG_RX_RESTART_NOW to FLAG_RESTART_NOW since it is used for resets in both the Rx and Tx specific code. Signed-off-by:
-
Bruce Allan authored
Energy Efficient Ethernet on 82579 and I217 should only be enabled if not disabled by the user, if the link is full duplex and the link partner has similar EEE capabilities (stored in different EMI registers on the two different parts). After enabling EEE, read the IEEE MMD register 3.1 (which is also stored in different EMI registers on the two different parts) to clear the count of received Tx/Rx LPI indications. Also, rename I217_EEE_100_SUPPORTED to I82579_EEE_100_SUPPORTED to indicate the bit is valid starting with I82579 (released before I217). Signed-off-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Bruce Allan authored
When connected to certain switches, the 82577 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by:
-
Bruce Allan authored
The Extended Management Interface (EMI) registers are accessed by first writing the EMI register offset to the EMI_ADDR regiter and then either reading or writing the data to/from the EMI_DATA register. Add helper functions for performing these steps and convert existing EMI register accesses accordingly. Signed-off-by:
-
Eric Dumazet authored
commit 1def9238 (net_sched: more precise pkt_len computation) does a wrong computation of mac + network headers length, as it includes the padding before the frame. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
-
Bruce Allan authored
On I217, the bit that indicates an invalid EEPROM (NVM) image checksum has changed from previous ICH/PCH LOMs. When validating the EEPROM checksum, check the appropriate bit on different devices. Signed-off-by:
-
Bruce Allan authored
When data blocks are written to the EEPROM, the HW/SW/FW semaphore must be held for the duration. With large data blocks on 80003es2lan, 82571 and 82572, this can take too long and cause the firmware to take ownership of the semaphore and consequently ownership of writes to the EEPROM. Instead, acquire and release the semaphore for each page of the block written. Signed-off-by:
-
Bruce Allan authored
Enables flow control to be set in SerDes autoneg mode. This is what is done for copper, but relies on a different set of register/bit checks since this is all done within the Mac registers. Remove inapplicable comment in defines.h Signed-off-by:
-
- 15 Jan, 2013 11 commits
-
-
Yuval Mintz authored
Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yuval Mintz authored
Since submit 621b4d66 the bnx2x driver support FW GRO. However, when using the device with GRO enabled in bridging scenarios throughput is very low, as the bridge expects all incoming packets to be passed with CHECKSUM_PARTIAL - a demand which is satisfied by the SW GRO implementation, but was missed in the bnx2x driver implementation (which returned CHECKSUM_UNNECESSARY). Now, given that the traffic is supported by FW GRO (TCP/IP), the bnx2x driver calculates the pseudo checksum by itself, passing skbs with CHECKSUM_PARTIAL and giving a much better throughput when receiving GRO traffic. Signed-off-by:
-
Yuval Mintz authored
When enabling interrupts, acknowledge the interrupt only after configuring the IGU to the correct interrupt mode (otherwise it would dirty selftests) Signed-off-by:
-
Yuval Mintz authored
Get better control over interrupts during panic, and allow FW to test outgoing Tx packets when stop-on-error is allowed. Signed-off-by:
-
Miriam Shitrit authored
This revises and enhances the bnx2x register dump facilities, adding support for `ethtool -w' on top of `ethtool -d'. Signed-off-by:
Miriam Shitrit <miris@broadcom.com> Signed-off-by:
-
Yuval Mintz authored
When a device is configured to act as either iscsi or fcoe device in its nvram, prevent the other from being misused by preventing its activation in the driver. Signed-off-by:
-
Yaniv Rosner authored
On rare occasions, self test link may fail since the link is being sampled while it's still being stabilized. To correct this behaviour, try to sample the link for 2 seconds prior to declaring a failure. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Current logic causes chips running in switch dependent multi-function FCoE mode not to configure their MAC, leading to an all 0s MAC. This patch configures the interface with the SAN Mac instead. Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Yuval Mintz authored
Self-tests following boot from SAN have failed as the UNDI driver might leave some NIG interrupt indications. This patch does the clean-up, clearing those indications and allowing the test to pass. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by:
-
