Add support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes warnings reported on linux-next but marking one path
and adding an explicit return in the other.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Brauchli <a.brauchli@elementarea.net>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>

Convert the driver to SPDX license description which allow removing
several lines in the file.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The drivers has been moved out since
0097e20e ("staging:iio:adc:lpc32xx Move out of staging.") in v4.10,
so let's align the binding documentation.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is a spelling mistake in several dev_err messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property.  In such case the input device is
not registered so it should not be unregistered.

    $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind

    Unable to handle kernel NULL pointer dereference at virtual address 00000474
    ...
    (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80)
    (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40)
    (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
    (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4)
    (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0)
    (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c)
    (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184)
    (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac)
    (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The "while (tries--) {" loop is a postop so it exits with "tries" set
to -1.

Fixes: 232e0f6d ("iio: chemical: add support for Sensirion SPS30 sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Align broken line to match upper line parenthesis. Solves the
checkpatch.pl's message:

CHECK: Alignment should match open parenthesis
Signed-off-by: Luciana da Costa Marques <lucianadacostamarques@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Bindings for dac7612.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

It is a driver for Texas Instruments Dual, 12-Bit Serial Input
Digital-to-Analog Converter.

Datasheet of this chip:
http://www.ti.com/lit/ds/sbas106/sbas106.pdfSigned-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for Texas Instruments ADS7866, ADS7867 and ADS7868
8/10/12 bit Single channel ADC.

Datasheet: http://www.ti.com/lit/ds/symlink/ads7868.pdfSigned-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The AD7768-1 core ADC receives a master clock signal (MCLK). The MCLK
frequency combined with the MCLK division and the digital filter
decimation rates, determines the sampling frequency. Along with
MCLK_DIV, the power mode is also configured according to datasheet
recommendations.

From user space, available sampling frequencies can be read. However,
it is not required for an exact value to be entered, since the driver
will look for the closest available match.

When the device configuration changes (for example, if the filter
decimation rate changes), a SYNC_IN pulse is required.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Analog Devices drivers are typically GPL v2 only. This patch fixes the
inconsistencies between the module license and SPDX.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add an IIO driver for the ADC hardware present on Ingenic JZ47xx SoCs.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree bindings for the ADC controller on JZ47xx SoCs,
used by the ingenic-adc driver.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add documentation for the ADC controller on JZ47xx SoCs,
used by the ingenic-adc driver.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We are using "if (ret < 0)" in many places in which the function returns 0
on success. Use "if (ret)" instead for better clarity and correctness.
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, we snap the timestamp after reading from the buffer and
processing the event. When the IIO poll function is triggered by an
interrupt,  we can get a slightly more accurate timestamp by snapping it
prior to reading the data, since the data was already generated prior to
entering the trigger handler. This is not going to make a huge difference,
but we might as well improve slightly.

Do this by using iio_pollfunc_store_time as other drivers do.
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We have added an optional boolean property for configuring a BMI160
interrupt pin as open-drain, as opposed to the default push-pull, so
document this.
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The bmi160 bindings say that the BMI160 requires level-triggered,
active-low interrupts, but it actually supports all interrupt types, so fix
the note to reflect that.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add interrupt support for the data ready signal on the BMI160, which fires
an interrupt whenever new accelerometer/gyroscope data is ready to read.
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add SPDX identifiers (GPL 2) for the BMI160 driver. bmi160.h had an
identifier, but the other files did not.
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Resolve "Line over 80 characters" warning from checkpatch
Signed-off-by: K Hodges <khodges42@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolved "Line over 80 characters" warning from checkpatch
Signed-off-by: K Hodges <khodges42@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename following members of struct rtllib_device to fix checkpatch
warning: Avoid CamelCase
	pDot11dInfo -> dot11d_info
	bGlobalDomain -> global_domain
	IbssStartChnl -> bss_start_channel
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename following members of struct rt_dot11d_info to fix checkpatch
warning: Avoid Camelcase
	bEnabled -> enabled
	CountryIeLen -> country_len
	CountryIeBuf -> country_buffer
	CountryIeSrcAddr -> country_src_addr
	CountryIeWatchdog -> country_watchdog
	MaxTxPwrDbmList -> max_tx_power_list
	State -> state
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename following members of chnl_txpow_triple to fix checkpatch
warning: Avoid CamelCase
	FirstChnl -> first_channel
	NumChnls -> num_channels
	MaxTxPowerInDbm -> max_tx_power
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename linux_wlan.c and linux_mon.c to wilc_netdev.c and wilc_mon.c to
include 'wilc_' prefix.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove 'linux_' prefix and replace it with 'wilc_' namespace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename wilc_frmw_to_linux() to wilc_frmw_to_host() to be remove the _linux
suffix.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to have proper follow clear namespace in wilc_sdio.c file.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to avoid function forward declaration by reordering the
function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move data structure and function prototype from 'wilc_wlan_if.h file.
Now, this file contains constant specific to the firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to rename data structure and function name to have 'wilc_'
prefix.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Set correct value in '->vif_num' for the total number of interfaces and
set '->idx' value using 'i'.

Fixes: 735bb39c ("staging: wilc1000: simplify vif[i]->ndev accesses")
Fixes: 0e490657 ("staging: wilc1000: Fix problem with wrong vif index")
Cc: <stable@vger.kernel.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch corrects the style for SPDX license Identifier in mac.h
by using "/* */" in place of "//" as per Linux kernel licensing rules.
Issue found by checkpatch.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a null check on pointer dev which implies it may be null, however
dev can never be null as it is set in rtl8192_usb_probe via the call
to usb_set_intfdata.

Detected by CoverityScan, CID#143078 ("Dereference after null check")

Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl warning:
    CHECK: Avoid CamelCase: <setDisplayControl>
Signed-off-by: Jin Chen <nobijinc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"psecnetwork" is the address of &psecuritypriv->sec_bss.  Since
->sec_bss isn't the first member of the struct that means that
"psecnetwork" can't be NULL.

We can just remove this dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add constant qualifer for 'p2p_vendor_spec' & 'p2p_oui' static
variable because they are treated like constant values.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>