- 03 Nov, 2020 28 commits
-
-
Vladimir Oltean authored
At the moment, taggers are left with the task of ensuring that the skb headers are writable (which they aren't, if the frames were cloned for TX timestamping, for flooding by the bridge, etc), and that there is enough space in the skb data area for the DSA tag to be pushed. Moreover, the life of tail taggers is even harder, because they need to ensure that short frames have enough padding, a problem that normal taggers don't have. The principle of the DSA framework is that everything except for the most intimate hardware specifics (like in this case, the actual packing of the DSA tag bits) should be done inside the core, to avoid having code paths that are very rarely tested. So provide a TX reallocation procedure that should cover the known needs of DSA today. Note that this patch also gives the network stack a good hint about the headroom/tailroom it's going to need. Up till now it wasn't doing that. So the reallocation procedure should really be there only for the exceptional cases, and for cloned packets which need to be unshared. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Christian Eggers <ceggers@arri.de> # For tail taggers only Tested-by:
Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
YueHaibing authored
Fix smatch warning: net/openvswitch/meter.c:427 ovs_meter_cmd_set() warn: passing zero to 'PTR_ERR' dp_meter_create() never returns NULL, use IS_ERR instead of IS_ERR_OR_NULL to fix this. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Link: https://lore.kernel.org/r/20201031060153.39912-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
-
Yuchung Cheng authored
During TCP fast recovery, the congestion control in charge is by default the Proportional Rate Reduction (PRR) unless the congestion control module specified otherwise (e.g. BBR). Previously when tcp_packets_in_flight() is below snd_ssthresh PRR would slow start upon receiving an ACK that 1) cumulatively acknowledges retransmitted data and 2) does not detect further lost retransmission Such conditions indicate the repair is in good steady progress after the first round trip of recovery. Otherwise PRR adopts the packet conservation principle to send only the amount that was newly delivered (indicated by this ACK). This patch generalizes the previous design principle to include also the newly sent data beside retransmission: as long as the delivery is making good progress, both retransmission and new data should be accounted to make PRR more cautious in slow starting. Suggested-by:
Matt Mathis <mattmathis@google.com> Suggested-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201031013412.1973112-1-ycheng@google.comSigned-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== VLAN improvements for Ocelot switch The main reason why I started this work is that deleting the bridge mdb entries fails when the bridge is deleted, as described here: https://lore.kernel.org/netdev/20201015173355.564934-1-vladimir.oltean@nxp.com/ In short, that happens because the bridge mdb entries are added with a vid of 1, but deletion is attempted with a vid of 0. So the deletion code fails to find the mdb entries. The solution is to make ocelot use a pvid of 0 when it is under a bridge with vlan_filtering 0. When vlan_filtering is 1, the pvid of the bridge is what is programmed into the hardware. The patch series also uncovers more bugs and does some more cleanup, but the above is the main idea behind it. ==================== Link: https://lore.kernel.org/r/20201031102916.667619-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
After the good discussion with Florian from here: https://lore.kernel.org/netdev/20200911000337.htwr366ng3nc3a7d@skbuf/ I realized that the VLAN settings on the NPI port (the hardware "CPU port", in DSA parlance) don't actually make any difference, because that port is hardcoded in hardware to use what mv88e6xxx would call "unmodified" egress policy for VLANs. So earlier patch 183be6f9 ("net: dsa: felix: send VLANs on CPU port as egress-tagged") was incorrect in the sense that it didn't actually make the VLANs be sent on the NPI port as egress-tagged. It only made ocelot_port_set_native_vlan shut up. Now that we have moved the check from ocelot_port_set_native_vlan to ocelot_vlan_prepare, we can simply shunt ocelot_vlan_prepare from DSA, and avoid calling it. This is the correct way to deal with things, because the NPI port configuration is DSA-specific, so the ocelot switch library should not have the check for multiple native VLANs refined in any way, it is correct the way it is. Signed-off-by:
-
Vladimir Oltean authored
Put the preparation phase of switchdev VLAN objects to some good use, and move the check we already had, for preventing the existence of more than one egress-untagged VLAN per port, to the preparation phase of the addition. Signed-off-by:
-
Vladimir Oltean authored
Currently, the ocelot_port_set_native_vlan() function starts dropping untagged and prio-tagged traffic when the native VLAN is removed? What is the native VLAN? It is the only egress-untagged VLAN that ocelot supports on a port. If the port is a trunk with 100 VLANs, one of those VLANs can be transmitted as egress-untagged, and that's the native VLAN. Is it wrong to drop untagged and prio-tagged traffic if there's no native VLAN? Yes and no. In this case, which is more typical, it's ok to apply that drop configuration: $ bridge vlan add dev swp0 vid 1 pvid untagged <- this is the native VLAN $ bridge vlan add dev swp0 vid 100 $ bridge vlan add dev swp0 vid 101 $ bridge vlan del dev swp0 vid 1 <- delete the native VLAN But only because the pvid and the native VLAN have the same ID. In this case, it isn't: $ bridge vlan add dev swp0 vid 1 pvid $ bridge vlan add dev swp0 vid 100 untagged <- this is the native VLAN $ bridge vlan del dev swp0 vid 101 $ bridge vlan del dev swp0 vid 100 <- delete the native VLAN It's wrong, because the switch will drop untagged and prio-tagged traffic now, despite having a valid pvid of 1. The confusion seems to stem from the fact that the native VLAN is an egress setting, while the PVID is an ingress setting. It would be correct to drop untagged and prio-tagged traffic only if there was no pvid on the port. So let's do just that. Background: https://lore.kernel.org/netdev/CA+h21hrRMrLH-RjBGhEJSTZd6_QPRSd3RkVRQF-wNKkrgKcRSA@mail.gmail.com/#tSigned-off-by:
-
Vladimir Oltean authored
Currently we are checking in some places whether the port has a native VLAN on egress or not, by comparing the ocelot_port->vid value with zero. That works, because VID 0 can never be a native VLAN configured by the bridge, but now we want to make similar checks for the pvid. That won't work, because there are cases when we do have the pvid set to 0 (not by the bridge, by ourselves, but still.. it's confusing). And we can't encode a negative value into an u16, so add a bool to the structure. Signed-off-by:
-
Vladimir Oltean authored
This is a mechanical patch only. Signed-off-by:
-
Vladimir Oltean authored
I have no idea why this code is here, but I have 2 hypotheses: 1. A desperate attempt to keep untagged traffic working when the bridge deletes the pvid on a port. There was a fairly okay discussion here: https://lore.kernel.org/netdev/CA+h21hrRMrLH-RjBGhEJSTZd6_QPRSd3RkVRQF-wNKkrgKcRSA@mail.gmail.com/#t which established that in vlan_filtering=1 mode, the absence of a pvid should denote that the ingress port should drop untagged and priority tagged traffic. While in vlan_filtering=0 mode, nothing should change. So in vlan_filtering=1 mode, we should simply let things happen, and not attempt to save the day. And in vlan_filtering=0 mode, the pvid is 0 anyway, no need to do anything. 2. The driver encodes the native VLAN (ocelot_port->vid) value of 0 as special, meaning "not valid". There are checks based on that. But there are no such checks for the ocelot_port->pvid value of 0. In fact, that's a perfectly valid value, which is used in standalone mode. Maybe there was some confusion and the author thought that 0 means "invalid" here as well. In conclusion, delete the code*. *in fact we'll add it back later, in a slightly different form, but for an entirely different reason than the one for which this exists now. Signed-off-by:
-
Vladimir Oltean authored
Currently, mscc_ocelot ports configure pvid=0 in standalone mode, and inherit the pvid from the bridge when one is present. When the bridge has vlan_filtering=0, the software semantics are that packets should be received regardless of whether there's a pvid configured on the ingress port or not. However, ocelot does not observe those semantics today. Moreover, changing the PVID is also a problem with vlan_filtering=0. We are privately remapping the VID of FDB, MDB entries to the port's PVID when those are VLAN-unaware (i.e. when the VID of these entries comes to us as 0). But we have no logic of adjusting that remapping when the user changes the pvid and vlan_filtering is 0. So stale entries would be left behind, and untagged traffic will stop matching on them. And even if we were to solve that, there's an even bigger problem. If swp0 has pvid 1, and swp1 has pvid 2, and both are under a vlan_filtering=0 bridge, they should be able to forward traffic between one another. However, with ocelot they wouldn't do that. The simplest way of fixing this is to never configure the pvid based on what the bridge is asking for, when vlan_filtering is 0. Only if there was a VLAN that the bridge couldn't mangle, that we could use as pvid.... So, turns out, there's 0 just for that. And for a reason: IEEE 802.1Q-2018, page 247, Table 9-2-Reserved VID values says: The null VID. Indicates that the tag header contains only priority information; no VID is present in the frame. This VID value shall not be configured as a PVID or a member ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ of a VID Set, or configured in any FDB entry, or used in any Management operation. So, aren't we doing exactly what 802.1Q says not to? Well, in a way, but what we're doing here is just driver-level bookkeeping, all for the better. The fact that we're using a pvid of 0 is not observable behavior from the outside world: the network stack does not see the classified VLAN that the switch uses, in vlan_filtering=0 mode. And we're also more consistent with the standalone mode now. And now that we use the pvid of 0 in this mode, there's another advantage: we don't need to perform any VID remapping for FDB and MDB entries either, we can just use the VID of 0 that the bridge is passing to us. The only gotcha is that every time we change the vlan_filtering setting, we need to reapply the pvid (either to 0, or to the value from the bridge). A small side-effect visible in the patch is that ocelot_port_set_pvid needs to be moved above ocelot_port_vlan_filtering, so that it can be called from there without forward-declarations. Signed-off-by:
-
Jakub Kicinski authored
Grygorii Strashko says: ==================== net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode This series adds multi-port support in mac-only mode (multi MAC mode) to TI AM65x CPSW driver in preparation for enabling support for multi-port devices, like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC. The multi MAC mode is implemented by configuring every enabled port in "mac-only" mode (all ingress packets are sent only to the Host port and egress packets directed to target Ext. Port) and creating separate net_device for every enabled Ext. port. This series does not affect on existing CPSW2g one Ext. Port devices and xmit path changes are done only for multi-port devices by splitting xmit path for one-port and multi-port devices. Patches 1-3: Preparation patches to improve K3 CPSW configuration depending on DT Patches 4-5: Fix VLAN offload for multi MAC mode Patch 6: Fixes CPTS context lose issue during PM runtime transition Patch 7: Fixes TX csum offload for multi MAC mode Patches 8-9: add multi-port support to TI AM65x CPSW Patch 10: handle deferred probe with new dev_err_probe() API changes in v3: - rebased - added Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> - added Patch 10 which is minor optimization changes in v2: - patch 8: xmit path split for one-port and multi-port devices to avoid performance losses - patch 9: fixed the case when Port 1 is disabled - Patch 7: added fix for TX csum offload v2: https://lore.kernel.org/patchwork/cover/1321608/ v1: https://lore.kernel.org/patchwork/cover/1315766/ ==================== Link: https://lore.kernel.org/r/20201030200707.24294-1-grygorii.strashko@ti.comSigned-off-by:
-
Grygorii Strashko authored
Use new dev_err_probe() API to handle deferred probe properly and simplify the code. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
This patch adds final multi-port support to TI AM65x CPSW driver path in preparation for adding support for multi-port devices, like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC. - the separate netdev is created for every enabled external Port; - DMA channels are common/shared for all external Ports and the RX/TX NAPI and DMA processing assigned to first available netdev; - external Ports are configured in mac-only mode, which is similar to TI "dual-mac" mode for legacy TI CPSW - packets are sent to the Host port only in ingress and directly to the Port on egress. No packet switching between external ports happens. - every port supports the same features as current AM65x CPSW on external device. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Grygorii Strashko authored
This patch adds multi-port support to TI AM65x CPSW driver xmit/rx path in preparation for adding support for multi-port devices, like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC. Hence DMA channels are common/shared for all ext Ports and the RX/TX NAPI and DMA processing going to be assigned to first available netdev this patch: - ensures all RX descriptors fields are initialized; - adds synchronization for TX DMA push/pop operation (locking) as Networking core locks are not enough any more; - updates TX bql processing for every packet in am65_cpsw_nuss_tx_compl_packets() as every completed TX skb can have different ndev assigned (come from different netdevs). To avoid performance issues for existing one-port CPSW2g devices the above changes are done only for multi-port devices by splitting xmit path for one-port and multi-port devices. Signed-off-by:
-
Grygorii Strashko authored
The current implementation uses .ndo_set_features() callback to track NETIF_F_HW_CSUM feature changes and update generic CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option accordingly. It's not going to work in case of multi-port devices as TX csum offload can be changed per netdev. On K3 CPSWxG devices TX csum offload enabled in the following way: - the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option enables TX csum offload in generic and affects all TX DMA channels and packets; - corresponding fields in TX DMA descriptor have to be filed properly when upper layer wants to offload TX csum (skb->ip_summed == CHECKSUM_PARTIAL) and it's per-packet option. The Linux Network core is expected to never request TX csum offload if netdev NETIF_F_HW_CSUM feature is disabled, and, as result, TX DMA descriptors should not be modified, and per-packet TX csum offload will be disabled (or enabled) on per-netdev basis. Which, in turn, makes it safe to enable the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option unconditionally. Hence, fix TX csum offload for multi-port devices by: - enabling the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option in am65_cpsw_nuss_common_open() unconditionally - and removing .ndo_set_features() callback implementation, which was used only NETIF_F_HW_CSUM feature update purposes Signed-off-by:
-
Grygorii Strashko authored
Some K3 CPSW NUSS instances can lose context after PM runtime ON->OFF->ON transition depending on integration (including all submodules: CPTS, MDIO, etc), like J721E Main CPSW (CPSW9G). In case CPTS is enabled it's initialized during probe and does not expect to be reset. Hence, keep K3 CPSW active by forbidding PM runtime if CPTS is enabled. Signed-off-by:
-
Grygorii Strashko authored
The VLAN offload for AM65x CPSW2G is implemented using existing ALE APIs, which are also used by legacy CPSW drivers. So, now it always adds current Ext. Port and Host as VLAN members when VLAN is added by 8021Q core (.ndo_vlan_rx_add_vid) and forcibly removes VLAN from ALE table in .ndo_vlan_rx_kill_vid(). This works as for AM65x CPSW2G (which has only one Ext. Port) as for legacy CPSW devices (which can't support same VLAN on more then one Port in multi mac (dual-mac) mode). But it doesn't work for the new J721E and AM64x multi port CPSWxG versions doesn't have such restrictions and allow to offload the same VLAN on any number of ports. Now the attempt to add same VLAN on two (or more) K3 CPSWxG Ports will cause: - VLAN members mask overwrite when VLAN is added - VLAN removal from ALE table when any Port removes VLAN This patch fixes an issue by: - switching to use cpsw_ale_vlan_add_modify() instead of cpsw_ale_add_vlan() when VLAN is added to ALE table, so VLAN members mask will not be overwritten; - Updates cpsw_ale_del_vlan() as: if more than one ext. Port is in VLAN member mask then remove only current port from VLAN member mask else remove VLAN ALE entry Example: add: P1 | P0 (Host) -> members mask: P1 | P0 add: P2 | P0 -> members mask: P2 | P1 | P0 rem: P1 | P0 -> members mask: P2 | P0 rem: P2 | P0 -> members mask: - The VLAN is forcibly removed if port_mask=0 passed to cpsw_ale_del_vlan() to preserve existing legacy CPSW drivers functionality. Signed-off-by: -
Grygorii Strashko authored
Add/export cpsw_ale_vlan_del_modify() and use it in cpsw_switchdev instead of generic cpsw_ale_del_vlan() to avoid mixing 8021Q and switchdev VLAN offload. This is preparation patch equired by follow up changes. Signed-off-by:
-
Grygorii Strashko authored
Use cppi5_desc_is_tdcm() helper for teardown indicator detection instead of hard-coded value. Signed-off-by:
-
Grygorii Strashko authored
In preparation of adding more multi-port K3 CPSW versions move free descriptor queue mode selection in am65_cpsw_pdata, so it can be selected basing on DT compatibility property. Signed-off-by:
-
Grygorii Strashko authored
In preparation of adding more multi-port K3 CPSW versions move ALE selection in am65_cpsw_pdata, so it can be selected basing on DT compatibility property. Signed-off-by:
-
Xin Long authored
net/ipv6/addrconf.c:2005: warning: Function parameter or member 'dev' not described in 'ipv6_dev_find' net/ipv6/ip6_vti.c:138: warning: Function parameter or member 'ip6n' not described in 'vti6_tnl_bucket' net/ipv6/ip6_tunnel.c:218: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_bucket' net/ipv6/ip6_tunnel.c:238: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_link' net/ipv6/ip6_tunnel.c:254: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_unlink' net/ipv6/ip6_tunnel.c:427: warning: Function parameter or member 'raw' not described in 'ip6_tnl_parse_tlv_enc_lim' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'skb' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'ipproto' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'opt' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'type' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'code' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'msg' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'info' not described in 'ip6_tnl_err' net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'offset' not described in 'ip6_tnl_err' ip6_tnl_err() is an internal function, so remove the kerneldoc. For the others, add the missing parameters. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201031183044.1082193-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
With W=1 the following error is reported: In function ‘strncpy’, inlined from ‘hdlcdrv_ioctl’ at drivers/net/hamradio/hdlcdrv.c:600:4: ./include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ ./include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); Replace strncpy with strlcpy to guarantee the string is terminated. Signed-off-by: -
Andrew Lunn authored
drivers/net/wan/lmc/lmc_main.c: In function ‘lmc_ioctl’: drivers/net/wan/lmc/lmc_main.c:356:25: warning: variable ‘mii’ set but not used [-Wunused-but-set-variable] 356 | u16 mii; | ^~~ drivers/net/wan/lmc/lmc_main.c:427:25: warning: variable ‘mii’ set but not used [-Wunused-but-set-variable] 427 | u16 mii; | ^~~ drivers/net/wan/lmc/lmc_main.c: In function ‘lmc_interrupt’: drivers/net/wan/lmc/lmc_main.c:1188:9: warning: variable ‘firstcsr’ set but not used [-Wunused-but-set-variable] 1188 | u32 firstcsr; This file has funky indentation, and makes little use of tabs. Keep with this style in the patch, but that makes checkpatch unhappy. Signed-off-by: -
Andrew Lunn authored
drivers/net/xen-netfront.c:2416:16: warning: variable ‘target’ set but not used [-Wunused-but-set-variable] 2416 | unsigned long target; Remove target and just discard the return value from simple_strtoul(). This patch does give a checkpatch warning, but the warning was there before anyway, as this file has lots of checkpatch warnings. Signed-off-by:
-
- 02 Nov, 2020 11 commits
-
-
Jakub Kicinski authored
Andrew Lunn says: ==================== davicom W=1 fixes Fixup various W=1 warnings, and then add COMPILE_TEST support, which explains why these where missed on the previous pass. ==================== Link: https://lore.kernel.org/r/20201031005833.1060316-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
Improve the build testing of this davicom driver by enabling it when COMPILE_TEST is selected. Signed-off-by:
-
Andrew Lunn authored
drivers/net/ethernet/davicom//dm9000.c: In function ‘dm9000_dumpblk_8bit’: drivers/net/ethernet/davicom//dm9000.c:235:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] The driver needs to read packet data from the device even when the packet is known bad. There is no need to assign the data to a variable during this discard operation. Signed-off-by:
-
Andrew Lunn authored
When compiled for platforms other than __i386__ or __x86_64__: drivers/net/ethernet/dec/tulip/tulip_core.c: In function ‘tulip_init_one’: drivers/net/ethernet/dec/tulip/tulip_core.c:1296:13: warning: variable ‘last_irq’ set but not used [-Wunused-but-set-variable] 1296 | static int last_irq; Add more #if defined() to totally remove the code when not needed. Signed-off-by:
-
Guillaume Nault authored
Test different encapsulation modes of the bareudp module: * Unicast MPLS, * IPv4 only, * IPv4 in multiproto mode (that is, IPv4 and IPv6), * IPv6. Each mode is tested with both an IPv4 and an IPv6 underlay. v2: * Add build dependencies in config file (Willem de Bruijn). * The MPLS test now uses its own IP addresses. This minimises the amount of cleanup between tests and simplifies the script. * Verify that iproute2 supports bareudp tunnels before running the script (and other minor usability improvements). Signed-off-by:Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/8abc0e58f8a7eeb404f82466505a73110bc43ab8.1604088587.git.gnault@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Ivan Mikhaylov says: ==================== add ast2400/2500 phy-handle support This patch introduces ast2400/2500 phy-handle support with an embedded MDIO controller. At the current moment it is not possible to set options with this format on ast2400/2500: mac { phy-handle = <&phy>; phy-mode = "rgmii"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@0 { compatible = "ethernet-phy-idxxxx.yyyy"; reg = <0>; }; }; }; The patch fixes it and gets possible PHYs and register them with of_mdiobus_register. Changes from v3: 1. add dt-bindings description of MDIO node and phy-handle option with example. Changes from v2: 1. change manual phy interface type check on phy_interface_mode_is_rgmii function. 2. add err_phy_connect label. 3. split ftgmac100_destroy_mdio into ftgmac100_phy_disconnect and ftgmac100_destroy_mdio. 4. remove unneeded mdio_np checks. Changes from v1: 1. split one patch into two. ==================== Link: https://lore.kernel.org/r/20201030133707.12099-1-i.mikhaylov@yadro.comSigned-off-by: -
Ivan Mikhaylov authored
Add the phy-handle and MDIO description and add the example with PHY and MDIO nodes. Signed-off-by:
Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by:
-
Ivan Mikhaylov authored
phy-handle can't be handled well for ast2400/2500 which has an embedded MDIO controller. Add ftgmac100_mdio_setup for ast2400/2500 and initialize PHYs from mdio child node with of_mdiobus_register. Signed-off-by:
-
Ivan Mikhaylov authored
Split MDIO registration and PHY connect into ftgmac100_setup_mdio and ftgmac100_mii_probe. Signed-off-by:
-
Grygorii Strashko authored
The timestamping tool is supporting now only PTPv1 (IEEE-1588 2002) while modern HW often supports also/only PTPv2. Hence timestamping tool is still useful for sanity testing of PTP drivers HW timestamping capabilities it's reasonable to upstate it to support PTPv2. This patch adds corresponding support which can be enabled by using new parameter "PTPV2". Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201029190931.30883-1-grygorii.strashko@ti.comSigned-off-by:
-
Andrew Lunn authored
net/9p/client.c:420: warning: Function parameter or member 'c' not described in 'p9_client_cb' net/9p/client.c:420: warning: Function parameter or member 'req' not described in 'p9_client_cb' net/9p/client.c:420: warning: Function parameter or member 'status' not described in 'p9_client_cb' net/9p/client.c:568: warning: Function parameter or member 'uidata' not described in 'p9_check_zc_errors' net/9p/trans_common.c:23: warning: Function parameter or member 'nr_pages' not described in 'p9_release_pages' net/9p/trans_common.c:23: warning: Function parameter or member 'pages' not described in 'p9_release_pages' net/9p/trans_fd.c:132: warning: Function parameter or member 'rreq' not described in 'p9_conn' net/9p/trans_fd.c:132: warning: Function parameter or member 'wreq' not described in 'p9_conn' net/9p/trans_fd.c:56: warning: Function parameter or member 'privport' not described in 'p9_fd_opts' net/9p/trans_rdma.c:113: warning: Function parameter or member 'cqe' not described in 'p9_rdma_context' net/9p/trans_rdma.c:129: warning: Function parameter or member 'privport' not described in 'p9_rdma_opts' net/9p/trans_virtio.c:215: warning: Function parameter or member 'limit' not described in 'pack_sg_list_p' net/9p/trans_virtio.c:83: warning: Function parameter or member 'chan_list' not described in 'virtio_chan' net/9p/trans_virtio.c:83: warning: Function parameter or member 'p9_max_pages' not described in 'virtio_chan' net/9p/trans_virtio.c:83: warning: Function parameter or member 'ring_bufs_avail' not described in 'virtio_chan' net/9p/trans_virtio.c:83: warning: Function parameter or member 'tag' not described in 'virtio_chan' net/9p/trans_virtio.c:83: warning: Function parameter or member 'vc_wq' not described in 'virtio_chan' Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Link: https://lore.kernel.org/r/20201031182655.1082065-1-andrew@lunn.chSigned-off-by:
-
- 01 Nov, 2020 1 commit
-
-
Vladimir Oltean authored
The commit cited below has changed only the functional prototype of br_multicast_querier_exists, but forgot to do that for the stub prototype (the one where CONFIG_BRIDGE_IGMP_SNOOPING is disabled). Fixes: 955062b0 ("net: bridge: mcast: add support for raw L2 multicast groups") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
