- 07 Dec, 2020 11 commits
-
-
Simon Ser authored
Fix one missing letter, and one duplicate struct field reference. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/3gESG7rm6lCex6qBZnl3YXTfefKZODEvJ4DX4RoI1cY@cp4-web-040.plabs.ch
-
Neil Armstrong authored
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. The init values was taken from the vendor source tree, comments were added to the know values but most of the init table is undocumented. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
This add the bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. Signed-off-by:
-
Dave Stevenson authored
BCM2711 DSI1 doesn't have the issue with the ARM not being able to write to the registers, therefore remove the DMA workaround for that compatible string. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxime@cerno.tech
-
Dave Stevenson authored
DSI1 on BCM2711 doesn't require the DMA workaround that is used on BCM2835/6/7, therefore it needs a new compatible string. Signed-off-by:
-
Dave Stevenson authored
DSI0 was partially supported, but didn't register with the main driver, and the code was inconsistent as to whether it checked port == 0 or port == 1. Add compatible string and other support to make it consistent. Signed-off-by:
-
Maxime Ripard authored
Most of the differences between DSI0 and DSI1 are handled through the ID. However, the BCM2711 DSI is going to introduce one more variable to the mix and will break some expectations of the earlier, simpler, test. Let's add a variant structure that will address most of the differences between those three controllers. Reviewed-by:
-
Maxime Ripard authored
The DSI clocks setup function has been using an array to store the clock name of either the DSI0 or DSI1 blocks, using the port ID to choose the proper one. Let's switch to an snprintf call to do the same thing and simplify the array a bit. Reviewed-by:
-
Dave Stevenson authored
The DSI1_PHY_AFEC0_PD_DLANE1 and DSI1_PHY_AFEC0_PD_DLANE3 register definitions were swapped, so trying to use more than a single data lane failed as lane 1 would get powered down. (In theory a 4 lane device would work as all lanes would remain powered). Correct the definitions. Signed-off-by:
-
Maxime Ripard authored
That pointer isn't used anywhere, so there's no point in keeping it. Reviewed-by:
-
Maxime Ripard authored
The infoframes are sent at a regular interval as a data island packet, so we don't need to wait for them to be sent when we're setting them up. However, we do need to poll when we're enabling since the we can't update the packet RAM until it has been sent. Let's add a boolean flag to tell whether we want to poll or not to support both cases. Suggested-by:
-
- 05 Dec, 2020 10 commits
-
-
Linus Walleij authored
The DSI version of the panel behaved instable and close scrutiny of the vendor driver from the Samsung GT-S8190 shows a different initialization sequence for the DSI mode panel than the DPI mode panel. Make the initialization depend on whether we are in DSI or DPI mode and handle the differences. After this the panel on the GT-I8190 becomes much more stable. Also spell out some more custom DCS commands found in the vendor source code to cut down a bit on magic where we can. Fixes: f0aee45f ("drm/panel: s6e63m0: Fix init sequence") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Linus Walleij authored
This moves the MCDE bindings over to using the YAML schema to describe the ST-Ericsson MCDE display controller, making use of the generic DSI controller schema. In the process we correct an error in the old text bindings: the clocks for the SDI host controllers were specified as part of the main MCDE component while they should be specified in the DSI host controller subnodes. This was a leftover from an earlier iteration of the first patch series adding the MCDE. We also add the "port" node, we will use this when adding LCD panels using the direct parallel interface DPI instead of DSI. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201115185145.566772-1-linus.walleij@linaro.org
-
Sam Ravnborg authored
Fix warnings: - drop kernel-doc for the two debug functions to avoid the warnings - delete unused code v2: - Updated subject (Lee) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimemrmann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-28-sam@ravnborg.org
-
Sam Ravnborg authored
Two W=1 string related warnings. - Using strncpy to copy string without null-termination generates a warning. Use memcpy to copy only the relevant chars - Fix a potential bug with a very long string, subtract one from the length to make room for the termination null. Signed-off-by:
-
Sam Ravnborg authored
Fix several W=1 warnings - Updated kernel-doc as needed - Deleted unused local variable, it was assigned but never used v2: - Updated subject (Lee) Signed-off-by:
-
Sam Ravnborg authored
Fix several W=1 warnings. This removes unused code and avoids an assignment by moving the use inside the conditional block. The register read FLD_GET(r, 15, 8) could be dropped as it was done a few lines before too. v2: - Updated subject (Lee) Signed-off-by:
-
Arnd Bergmann authored
gcc warns about an out-of-bounds access when the using nonzero values for 'plane_id' on kmb->plane_status: drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable': drivers/gpu/drm/kmb/kmb_plane.c:128:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] 128 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:125:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] 125 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:122:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] 122 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE; Having the array truncated to one entry seems intentional, so add a range check before indexing it to make it clearer what is going on and shut up the warning. I received the warning from the kernel test robot after a private patch that turns on Warray-bounds unconditionally. Fixes: 7f7b96a8 ("drm/kmb: Add support for KeemBay Display") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Signed-off-by:
-
Douglas Anderson authored
I forgot to add these when posting up the support for BOE NV110WTM-N61. Add them now. Fixes: a96ee0f6 ("drm: panel: simple: Add BOE NV110WTM-N61") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Douglas Anderson authored
In commit 131f909a ("drm: panel: simple: Fixup the struct panel_desc kernel doc") I transitioned the more deeply nested kerneldoc comments into the inline style. Apparently it is desirable to continue the job and move _everything_ in this struct to inline. Let's do it. While doing this, we also add a short summary for the whole struct to fix a warning when we run with extra warnings, AKA: scripts/kernel-doc -v -rst drivers/gpu/drm/panel/panel-simple.c The warning was: drivers/gpu/drm/panel/panel-simple.c:42: warning: missing initial short description on line: * struct panel_desc Suggested-by:
-
Laurent Pinchart authored
The drmm_add_final_kfree() function is declared in the include/drm/drm_managed.h public header, but has become an internal API not exposed to drivers. Drop it from drm_managed.h as it's already declared in drm_internal.h. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
-
- 04 Dec, 2020 3 commits
-
-
Tian Tao authored
Delete the entire file hibmc_ttm.c. drmm_vram_helper_init() can be called directly from hibmc_load(). hibmc_dumb_create() and hibmc_mode_funcs can go to hibmc_drm_drv.c v2: change Deletted to Delete Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
-
Tian Tao authored
updated to use drmm_vram_helper_init() Signed-off-by:
-
Krzysztof Kozlowski authored
The Ingenic DRM uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with RALINK and SOC_RT305X): /usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/ingenic/ingenic-drm-drv.o: in function `ingenic_drm_bind.isra.0': ingenic-drm-drv.c:(.text+0x1600): undefined reference to `clk_get_parent' /usr/bin/mips-linux-gnu-ld: ingenic-drm-drv.c:(.text+0x16b0): undefined reference to `clk_get_parent' Reported-by:Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201116175301.402787-2-krzk@kernel.org
-
- 03 Dec, 2020 5 commits
-
-
Chuhong Yuan authored
setcmap_legacy() does not call drm_modeset_unlock_all() in some exits, add the missed unlocks with goto to fix it. Fixes: 964c6006 ("drm/fb-helper: separate the fb_setcmap helper into atomic and legacy paths") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201203144248.418281-1-hslester96@gmail.com
-
Dan Carpenter authored
The main problem with this error handling was that it didn't clean up if i2c_add_numbered_adapter() failed. This code is pretty old, and doesn't match with today's checkpatch.pl standards so I took the opportunity to tidy it up a bit. I changed the NULL comparison, and removed the WARNING message if kzalloc() fails and updated the label names. Fixes: 1b082ccf ("gma500: Add Oaktrail support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/X8ikkAqZfnDO2lu6@mwanda
-
Tian Tao authored
Use devm_drm_irq_install to register interrupts so that drm_irq_uninstall is not called when hibmc is removed. Signed-off-by:
-
Tian Tao authored
Add new api devm_drm_irq_install() to register interrupts, no need to call drm_irq_uninstall() when the drm module is removed. Signed-off-by:
-
Tian Tao authored
Use the devm_drm_dev_alloc provided by the drm framework to alloc a structure hibmc_drm_private. Signed-off-by:
-
- 02 Dec, 2020 4 commits
-
-
Simon Ser authored
It seems like we can't have nice things, so let's just document the disappointing behaviour instead. The previous version assumed the kernel would perform the probing work when appropriate, however this is not the case today. Update the documentation to reflect reality. v2: - Improve commit message to explain why this change is made (Pekka) - Keep the bit about flickering (Daniel) - Explain when user-space should force-probe, and when it shouldn't (Daniel) Signed-off-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/AxqLnTAsFCRishOVB5CLsqIesmrMrm7oytnOVB7oPA@cp7-web-043.plabs.ch
-
Gurchetan Singh authored
This an incremental refactor towards multiple dma-fence contexts in virtio-gpu. Since all fences are still allocated using &virtio_gpu_fence_driver.context, nothing should break and every processed fence will be signaled. The overall idea is every 3D context can allocate a number of dma-fence contexts. Each dma-fence context refers to it's own timeline. For example, consider the following case where virgl submits commands to the GPU (fence ids 1, 3) and does a metadata query with the CPU (fence id 5). In a different process, gfxstream submits commands to the GPU (fence ids 2, 4). fence_id (&dma_fence.seqno) | 1 2 3 4 5 ----------------------------------|----------- fence_ctx 0 (virgl gpu) | 1 3 fence_ctx 1 (virgl metadata query)| 5 fence_ctx 2 (gfxstream gpu) | 2 4 With multiple fence contexts, we can wait for the metadata query to finish without waiting for the virgl gpu to finish. virgl gpu does not have to wait for gfxstream gpu. The fence id still is the monotonically increasing sequence number, but it's only revelant to the specific dma-fence context. To fully enable this feature, we'll need to: - have each 3d context allocate a number of fence contexts. Not too hard with explicit context initialization on the horizon. - have guest userspace specify fence context when performing ioctls. - tag each fence emitted to the host with the fence context information. virtio_gpu_ctrl_hdr has padding + flags available, so that should be easy. This change goes in the direction specified above, by: - looking up the virtgpu_fence given a fence_id - signalling all prior fences in a given context - signalling current fence v2: fix grammar in comment v3: add r-b tags Reviewed-by:Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-3-gurchetansingh@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gurchetan Singh authored
virtio_gpu_fence_event_process sets the last_fence_id and subsequently calls dma_fence_signal_locked(..). dma_fence_signal_locked(..) sets DMA_FENCE_FLAG_SIGNALED_BIT, which is actually checked before &dma_fence_ops.(*signaled) is called. The check for last_fence_id is therefore a bit redundant, and it will not be sufficient to check the last_fence_id for multiple synchronization timelines. Remove it. v3: add r-b tags Signed-off-by:
-
Gurchetan Singh authored
virtio_gpu typically uses the prefix virtio_gpu, but there are a few places where the virtio prefix is used. Modify this for consistency. v3: add r-b tags Signed-off-by:
-
- 01 Dec, 2020 4 commits
-
-
Christian König authored
Daniel added a warning for this, but we were abusing that behavior here. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: 57fcd550 ("drm/ttm: Warn on pinning without holding a reference") Acked-by:
-
Daniel Vetter authored
Purely conjecture, but I think the original locking inversion with the legacy page flip code between flipping and ttm's bo move function shoudn't exist anymore with atomic: With atomic the bo pinning and actual modeset commit is completely separated in the code patsh. This annotation was originally added in commit 060810d7 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Jul 8 14:15:51 2013 +1000 drm/nouveau: fix locking issues in page flipping paths due to commit b580c9e2 Author: Maarten Lankhorst <m.b.lankhorst@gmail.com> Date: Thu Jun 27 13:48:18 2013 +0200 drm/nouveau: make flipping lockdep safe Acked-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Dave Airlie <airlied@gmail.com> Cc: nouveau@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20201127163528.2221671-1-daniel.vetter@ffwll.ch
-
Jialin Zhang authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5c49fd3a ("gma500: Add the core DRM files and headers") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jialin Zhang <zhangjialin11@huawei.com> Signed-off-by:
-
Christian König authored
ttm_module.h deals with internals of TTM and should never be include outside of it. v2: also move the file around Signed-off-by:
-
- 30 Nov, 2020 3 commits
-
-
Sam Ravnborg authored
Fix warnings by deleting unused code. The register reads are kept as it is unknown if there are any hidden side-effects. v2: - Update subject (Lee) Signed-off-by:
-
Sam Ravnborg authored
Fix W=1 warnings by removing unused code v2: - Updated subject (Lee) Signed-off-by:
-
Sam Ravnborg authored
Fix set but not used warnings by introducing no_printk variants for the internal logging system for this driver. Fix a new warning that popped up now that logging was checked for correct printf format strings. A more invasive fix had been to replace all the internal logging with standard logging primitives - thats for another day. v2: - Update subject (Lee) Signed-off-by:
-
