1. 23 Jul, 2013 3 commits
    • Linus Torvalds's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · a582e5f5
      Linus Torvalds authored
      Pull thermal management fixes from Zhang Rui:
       "These are fixes collected over the last week, they fixes several
        problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1.
      
        Specifics:
      
         - the x86_pkg_temp_thermal driver causes crash on systems with no
           package MSR support as there is a bug in the logic to check
           presence of DTHERM and PTS feature together.  Added a change so
           that when there is no PTS support, module doesn't get loaded.
      
         - fix krealloc() misuse in pkg_temp_thermal_device_add().
      
           If krealloc() returns NULL, it doesn't free the original.  Thus if
           we want to exit because of the krealloc() failure, we must make
           sure the original one is freed.
      
         - The error code path of the x86 package temperature thermal driver's
           initialization routine makes an unbalanced call to
           get_online_cpus(), which causes subsequent CPU offline operations,
           and consequently system suspend, to permanently block in
           cpu_hotplug_begin() on systems where get_core_online() returns an
           error code.
      
           Remove the extra get_online_cpus() to fix the problem"
      
      * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        Thermal: Fix lockup of cpu_down()
        Thermal: x86_pkg_temp: Limit number of pkg temp zones
        Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add()
        Thermal: x86 package temp thermal crash
      a582e5f5
    • Linus Torvalds's avatar
      Merge tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · b7371e31
      Linus Torvalds authored
      Pull gpio fixes from Linus Walleij:
       "A first round of GPIO fixes for the v3.11 series:
         - OMAP device tree boot fix
         - Handle an error condition in the MSM driver
      
        The OMAP patches have been around since around the merge window, but
        since they first caused more breakage I let them boil in -next for a
        while.  These should be fine now"
      
      * tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        drivers: gpio: msm: Fix the error condition for reading ngpio
        gpio/omap: fix build error when OF_GPIO is not defined.
        gpio/omap: auto request GPIO as input if used as IRQ via DT
        gpio/omap: don't create an IRQ mapping for every GPIO on DT
      b7371e31
    • Linus Torvalds's avatar
      Merge branch 'for-3.11/drivers' of git://git.kernel.dk/linux-block · d4c90b1b
      Linus Torvalds authored
      Pull block IO driver bits from Jens Axboe:
       "As I mentioned in the core block pull request, due to real life
        circumstances the driver pull request would be late.  Now it looks
        like -rc2 late...  On the plus side, apart form the rsxx update, these
        are all things that I could argue could go in later in the cycle as
        they are fixes and not features.  So even though things are late, it's
        not ALL bad.
      
        The pull request contains:
      
         - Updates to bcache, all bug fixes, from Kent.
      
         - A pile of drbd bug fixes (no big features this time!).
      
         - xen blk front/back fixes.
      
         - rsxx driver updates, some of them deferred form 3.10.  So should be
           well cooked by now"
      
      * 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits)
        bcache: Allocation kthread fixes
        bcache: Fix GC_SECTORS_USED() calculation
        bcache: Journal replay fix
        bcache: Shutdown fix
        bcache: Fix a sysfs splat on shutdown
        bcache: Advertise that flushes are supported
        bcache: check for allocation failures
        bcache: Fix a dumb race
        bcache: Use standard utility code
        bcache: Update email address
        bcache: Delete fuzz tester
        bcache: Document shrinker reserve better
        bcache: FUA fixes
        drbd: Allow online change of al-stripes and al-stripe-size
        drbd: Constants should be UPPERCASE
        drbd: Ignore the exit code of a fence-peer handler if it returns too late
        drbd: Fix rcu_read_lock balance on error path
        drbd: fix error return code in drbd_init()
        drbd: Do not sleep inside rcu
        bcache: Refresh usage docs
        ...
      d4c90b1b
  2. 22 Jul, 2013 1 commit
    • Steven Rostedt's avatar
      Thermal: Fix lockup of cpu_down() · ace120dc
      Steven Rostedt authored
      Commit f1a18a10 "Thermal: CPU Package temperature thermal" had code
      that did a get_online_cpus(), run a loop and then do a
      put_online_cpus(). The problem is that the loop had an error exit that
      would skip the put_online_cpus() part.
      
      In the error exit part of the function, it also did a get_online_cpus(),
      run a loop and then put_online_cpus(). The only way to get to the error
      exit part is with get_online_cpus() already performed. If this error
      condition is hit, the system will be prevented from taking CPUs offline.
      The process taking the CPU offline will lock up hard.
      
      Removing the get_online_cpus() removes the lockup as the hotplug CPU
      refcount is back to zero.
      
      This was bisected with ktest.
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
      ace120dc
  3. 21 Jul, 2013 5 commits
    • Linus Torvalds's avatar
      Linux 3.11-rc2 · 3b2f64d0
      Linus Torvalds authored
      3b2f64d0
    • Linus Torvalds's avatar
      Merge tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · ea45ea70
      Linus Torvalds authored
      Pull ACPI video support fixes from Rafael Wysocki:
       "I'm sending a separate pull request for this as it may be somewhat
        controversial.  The breakage addressed here is not really new and the
        fixes may not satisfy all users of the affected systems, but we've had
        so much back and forth dance in this area over the last several weeks
        that I think it's time to actually make some progress.
      
        The source of the problem is that about a year ago we started to tell
        BIOSes that we're compatible with Windows 8, which we really need to
        do, because some systems shipping with Windows 8 are tested with it
        and nothing else, so if we tell their BIOSes that we aren't compatible
        with Windows 8, we expose our users to untested BIOS/AML code paths.
      
        However, as it turns out, some Windows 8-specific AML code paths are
        not tested either, because Windows 8 actually doesn't use the ACPI
        methods containing them, so if we declare Windows 8 compatibility and
        attempt to use those ACPI methods, things break.  That occurs mostly
        in the backlight support area where in particular the _BCM and _BQC
        methods are plain unusable on some systems if the OS declares Windows
        8 compatibility.
      
        [ The additional twist is that they actually become usable if the OS
          says it is not compatible with Windows 8, but that may cause
          problems to show up elsewhere ]
      
        Investigation carried out by Matthew Garrett indicates that what
        Windows 8 does about backlight is to leave backlight control up to
        individual graphics drivers.  At least there's evidence that it does
        that if the Intel graphics driver is used, so we've decided to follow
        Windows 8 in that respect and allow i915 to control backlight (Daniel
        likes that part).
      
        The first commit from Aaron Lu makes ACPICA export the variable from
        which we can infer whether or not the BIOS believes that we are
        compatible with Windows 8.
      
        The second commit from Matthew Garrett prepares the ACPI video driver
        by making it initialize the ACPI backlight even if it is not going to
        be used afterward (that is needed for backlight control to work on
        Thinkpads).
      
        The third commit implements the actual workaround making i915 take
        over backlight control if the firmware thinks it's dealing with
        Windows 8 and is based on the work of multiple developers, including
        Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.
      
        The final commit from Aaron Lu makes us follow Windows 8 by informing
        the firmware through the _DOS method that it should not carry out
        automatic brightness changes, so that brightness can be controlled by
        GUI.
      
        Hopefully, this approach will allow us to avoid using blacklists of
        systems that should not declare Windows 8 compatibility just to avoid
        backlight control problems in the future.
      
         - Change from Aaron Lu makes ACPICA export a variable which can be
           used by driver code to determine whether or not the BIOS believes
           that we are compatible with Windows 8.
      
         - Change from Matthew Garrett makes the ACPI video driver initialize
           the ACPI backlight even if it is not going to be used afterward
           (that is needed for backlight control to work on Thinkpads).
      
         - Fix from Rafael J Wysocki implements Windows 8 backlight support
           workaround making i915 take over bakclight control if the firmware
           thinks it's dealing with Windows 8.  Based on the work of multiple
           developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
           and Aaron Lu.
      
         - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
           the firmware through the _DOS method that it should not carry out
           automatic brightness changes, so that brightness can be controlled
           by GUI"
      
      * tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI / video: no automatic brightness changes by win8-compatible firmware
        ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
        ACPI / video: Always call acpi_video_init_brightness() on init
        ACPICA: expose OSI version
      ea45ea70
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 90db76e8
      Linus Torvalds authored
      Pull ext[34] tmpfile bugfix from Ted Ts'o:
       "Fix regression caused by commit af51a2ac which added ->tmpfile()
        support (along with a similar fix for ext3)"
      
      * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
        ext3: fix a BUG when opening a file with O_TMPFILE flag
        ext4: fix a BUG when opening a file with O_TMPFILE flag
      90db76e8
    • Zheng Liu's avatar
      ext3: fix a BUG when opening a file with O_TMPFILE flag · dda5690d
      Zheng Liu authored
      When we try to open a file with O_TMPFILE flag, we will trigger a bug.
      The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
      this check always fails because we set ->i_nlink = 1 in
      inode_init_always().  We can use the following program to trigger it:
      
      int main(int argc, char *argv[])
      {
      	int fd;
      
      	fd = open(argv[1], O_TMPFILE, 0666);
      	if (fd < 0) {
      		perror("open ");
      		return -1;
      	}
      	close(fd);
      	return 0;
      }
      
      The oops message looks like this:
      
      kernel: kernel BUG at fs/ext3/namei.c:1992!
      kernel: invalid opcode: 0000 [#1] SMP
      kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd
      kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4
      kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010
      kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000
      kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
      kernel: RSP: 0018:ffff8801124d5cc8  EFLAGS: 00010202
      kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0
      kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8
      kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f
      kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000
      kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8
      kernel: FS:  00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000
      kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0
      kernel: Stack:
      kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7
      kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000
      kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1
      kernel: Call Trace:
      kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd]
      kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3]
      kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7
      kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30
      kernel: [<ffffffff82065fa2>] ?  __dequeue_entity+0x33/0x38
      kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d
      kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102
      kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd
      kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20
      kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b
      kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0
      kernel: RIP  [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
      kernel: RSP <ffff8801124d5cc8>
      
      Here we couldn't call clear_nlink() directly because in d_tmpfile() we
      will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
      tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
      Signed-off-by: default avatarZheng Liu <wenqing.lz@taobao.com>
      Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      dda5690d
    • Zheng Liu's avatar
      ext4: fix a BUG when opening a file with O_TMPFILE flag · e94bd349
      Zheng Liu authored
      When we try to open a file with O_TMPFILE flag, we will trigger a bug.
      The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
      this check always fails because we set ->i_nlink = 1 in
      inode_init_always().  We can use the following program to trigger it:
      
      int main(int argc, char *argv[])
      {
      	int fd;
      
      	fd = open(argv[1], O_TMPFILE, 0666);
      	if (fd < 0) {
      		perror("open ");
      		return -1;
      	}
      	close(fd);
      	return 0;
      }
      
      The oops message looks like this:
      
      kernel BUG at fs/ext4/namei.c:2572!
      invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli
      nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir
      da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp
      kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
      CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12
      Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
      task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000
      RIP: 0010:[<ffffffff8125ce69>]  [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0
      RSP: 0018:ffff88010f7b7cf8  EFLAGS: 00010202
      RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000
      RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001
      RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0
      R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668
      R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0
      FS:  00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0
      DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
      Stack:
       0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00
       ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c
       ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004
      Call Trace:
       [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180
       [<ffffffff811cba78>] path_openat+0x238/0x700
       [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80
       [<ffffffff811cc647>] do_filp_open+0x47/0xa0
       [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200
       [<ffffffff811ba2e4>] do_sys_open+0x124/0x210
       [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290
       [<ffffffff811ba3ee>] SyS_open+0x1e/0x20
       [<ffffffff816ca8d4>] tracesys+0xdd/0xe2
       [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0
      Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00
      
      Here we couldn't call clear_nlink() directly because in d_tmpfile() we
      will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
      tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
      Reported-by: default avatarDave Jones <davej@redhat.com>
      Signed-off-by: default avatarZheng Liu <wenqing.lz@taobao.com>
      Tested-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Tested-by: default avatarDave Jones <davej@redhat.com>
      Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      Acked-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      e94bd349
  4. 20 Jul, 2013 11 commits
    • Linus Torvalds's avatar
      Merge tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · f6a0d9d5
      Linus Torvalds authored
      Pull staging tree fixes from Greg KH:
       "Here are a few iio driver fixes for 3.11-rc2.  They are still spread
        across drivers/iio and drivers/staging/iio so they are coming in
        through this tree.
      
        I've also removed the drivers/staging/csr/ driver as the developers
        who originally sent it to me have moved on to other companies, and CSR
        still will not send us the specs for the device, making the driver
        pretty much obsolete and impossible to fix up.  Deleting it now
        prevents people from sending in lots of tiny codingsyle fixes that
        will never go anywhere.
      
        It also helps to offset the large lustre filesystem merge that
        happened in 3.11-rc1 in the overall 3.11.0 diffstat.  :)"
      
      * tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: csr: remove driver
        iio: lps331ap: Fix wrong in_pressure_scale output value
        iio staging: fix lis3l02dq, read error handling
        staging:iio:ad7291: add missing .driver_module to struct iio_info
        iio: ti_am335x_adc: add missing .driver_module to struct iio_info
        iio: mxs-lradc: Remove useless check in read_raw
        iio: mxs-lradc: Fix misuse of iio->trig
        iio: inkern: fix iio_convert_raw_to_processed_unlocked
        iio: Fix iio_channel_has_info
        iio:trigger: device_unregister->device_del to avoid double free
        iio: dac: ad7303: fix error return code in ad7303_probe()
      f6a0d9d5
    • Rohit Vaswani's avatar
      drivers: gpio: msm: Fix the error condition for reading ngpio · afe8ce9b
      Rohit Vaswani authored
      of_property_read_u32 return 0 on success. The check was using a ! to
      return error. Fix the if condition.
      Signed-off-by: default avatarRohit Vaswani <rvaswani@codeaurora.org>
      Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Reviewed-by: default avatarPankaj Jangra  <jangra.pankaj9@gmail.com>
      Cc: "Bird, Tim" <Tim.Bird@sonymobile.com>
      Signed-off-by: default avatarDavid Brown <davidb@codeaurora.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      afe8ce9b
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 36231d25
      Linus Torvalds authored
      Pull vfs fixes from Al Viro:
       "The sget() one is a long-standing bug and will need to go into -stable
        (in fact, it had been originally caught in RHEL6), the other two are
        3.11-only"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        vfs: constify dentry parameter in d_count()
        livelock avoidance in sget()
        allow O_TMPFILE to work with O_WRONLY
      36231d25
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 19bf1c2c
      Linus Torvalds authored
      Pull ext4 bugfixes from Ted Ts'o:
       "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style.  :-)"
      
      I'm not sure I like this new level of "professionalism".
      9-5, people, 9-5.
      
      * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
        ext4: call ext4_es_lru_add() after handling cache miss
        ext4: yield during large unlinks
        ext4: make the extent_status code more robust against ENOMEM failures
        ext4: simplify calculation of blocks to free on error
        ext4: fix error handling in ext4_ext_truncate()
      19bf1c2c
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 3be542d4
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
       - Fix a regression against NFSv4 FreeBSD servers when creating a new
         file
       - Fix another regression in rpc_client_register()
      
      * tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4: Fix a regression against the FreeBSD server
        SUNRPC: Fix another issue with rpc_client_register()
      3be542d4
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next · 90290c4e
      Linus Torvalds authored
      Pull btrfs fixes from Josef Bacik:
       "I'm playing the role of Chris Mason this week while he's on vacation.
        There are a few critical fixes for btrfs here, all regressions and
        have been tested well"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next:
        Btrfs: fix wrong write offset when replacing a device
        Btrfs: re-add root to dead root list if we stop dropping it
        Btrfs: fix lock leak when resuming snapshot deletion
        Btrfs: update drop progress before stopping snapshot dropping
      90290c4e
    • Javier Martinez Canillas's avatar
      gpio/omap: fix build error when OF_GPIO is not defined. · 949eb1a4
      Javier Martinez Canillas authored
      The OMAP GPIO driver check if the chip has an associated
      Device Tree node using the struct gpio_chip of_node member.
      
      But this is only build if CONFIG_OF_GPIO is defined which
      leads to the following error when using omap1_defconfig:
      
      linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_chip_init':
      linux/drivers/gpio/gpio-omap.c:1080:17: error: 'struct gpio_chip' has no member named 'of_node'
      linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_map':
      linux/drivers/gpio/gpio-omap.c:1116:16: error: 'struct gpio_chip' has no member named 'of_node'
      Reported-by: default avatarKevin Hilman <khilman@linaro.org>
      Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      949eb1a4
    • Javier Martinez Canillas's avatar
      gpio/omap: auto request GPIO as input if used as IRQ via DT · b4419e1a
      Javier Martinez Canillas authored
      When an OMAP GPIO is used as an IRQ line, a call to gpio_request()
      has to be made to initialize the OMAP GPIO bank before a driver
      request the IRQ. Otherwise the call to request_irq() fails.
      
      Drives should not be aware of this neither care wether an IRQ line
      is a GPIO or not. They should just request the IRQ and this has to
      be handled by the irq_chip driver.
      
      With the current OMAP GPIO DT binding, if we define:
      
          gpio6: gpio@49058000 {
          	   compatible = "ti,omap3-gpio";
      	   reg = <0x49058000 0x200>;
      	   interrupts = <34>;
      	   ti,hwmods = "gpio6";
      	   gpio-controller;
      	   #gpio-cells = <2>;
      	   interrupt-controller;
      	   #interrupt-cells = <2>;
          };
      
      	   interrupt-parent = <&gpio6>;
                 interrupts = <16 8>;
      
      The GPIO is correctly mapped as an IRQ but a call to gpio_request()
      is never made. Since a call to the custom IRQ domain .map function
      handler is made for each GPIO used as an IRQ, the GPIO can be setup
      and configured as input there automatically.
      
      Changes since v3:
        - Use bank->chip.of_node instead of_have_populated_dt() to check
          DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD
        - Add a comment that this is just a temporary solution until and
          that it has to be removed once is handled by the IRQ core.
      
      Changes since v2:
       - Only make the call to gpio_request_one() conditional in the DT
         case as suggested by Grant Likely.
      
      Changes since v1:
        - Split the irq domain mapping function handler and the GPIO
          request in two different patches.
      Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
      Tested-by: default avatarEnric Balletbo i Serra <eballetbo@gmail.com>
      Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
      Acked-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      b4419e1a
    • Javier Martinez Canillas's avatar
      gpio/omap: don't create an IRQ mapping for every GPIO on DT · 0e970cec
      Javier Martinez Canillas authored
      When a GPIO is defined as an interrupt line using Device
      Tree, a call to irq_create_of_mapping() is made that calls
      irq_create_mapping(). So, is not necessary to do the mapping
      for all OMAP GPIO lines and explicitly call irq_create_mapping()
      on the driver probe() when booting with Device Tree.
      
      Add a custom IRQ domain .map function handler that will be
      called by irq_create_mapping() to map the GPIO lines used as IRQ.
      This also allows to execute needed setup code such as configuring
      a GPIO as input and enabling the GPIO bank.
      
      Changes since v3:
        - Use bank->chip.of_node instead of_have_populated_dt() to check
          DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD
      
      Changes since v2:
        - Unconditionally do the IRQ setup in the .map() function and
          only call irq_create_mapping() in the gpio chip init to avoid
          code duplication as suggested by Grant Likely.
      
      Changes since v1:
        - Split the addition of the .map function handler and the
          automatic gpio request in two different patches.
        - Add GPIO IRQ setup logic to the irq domain mapping function.
        - Only call irq_create_mapping for every GPIO on legacy boot.
        - Only setup a GPIO IRQ on the .map function for DeviceTree boot.
      Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
      Tested-by: default avatarEnric Balletbo i Serra <eballetbo@gmail.com>
      Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
      Acked-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      0e970cec
    • Peng Tao's avatar
      vfs: constify dentry parameter in d_count() · 24924a20
      Peng Tao authored
      so that it can be used in places like d_compare/d_hash
      without causing a compiler warning.
      Signed-off-by: default avatarPeng Tao <tao.peng@emc.com>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      24924a20
    • Al Viro's avatar
      livelock avoidance in sget() · acfec9a5
      Al Viro authored
      Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about
      to fail.  The superblock is on ->fs_supers, ->s_umount is held exclusive,
      ->s_active is 1.  Along comes two more processes, trying to mount the same
      thing; sget() in each is picking that superblock, bumping ->s_count and
      trying to grab ->s_umount.  ->s_active is 3 now.  Original mount(2)
      finally gets to deactivate_locked_super() on failure; ->s_active is 2,
      superblock is still ->fs_supers because shutdown will *not* happen until
      ->s_active hits 0.  ->s_umount is dropped and now we have two processes
      chasing each other:
      s_active = 2, A acquired ->s_umount, B blocked
      A sees that the damn thing is stillborn, does deactivate_locked_super()
      s_active = 1, A drops ->s_umount, B gets it
      A restarts the search and finds the same superblock.  And bumps it ->s_active.
      s_active = 2, B holds ->s_umount, A blocked on trying to get it
      ... and we are in the earlier situation with A and B switched places.
      
      The root cause, of course, is that ->s_active should not grow until we'd
      got MS_BORN.  Then failing ->mount() will have deactivate_locked_super()
      shut the damn thing down.  Fortunately, it's easy to do - the key point
      is that grab_super() is called only for superblocks currently on ->fs_supers,
      so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and
      bump ->s_active; we must never increment ->s_count for superblocks past
      ->kill_sb(), but grab_super() is never called for those.
      
      The bug is pretty old; we would've caught it by now, if not for accidental
      exclusion between sget() for block filesystems; the things like cgroup or
      e.g. mtd-based filesystems don't have anything of that sort, so they get
      bitten.  The right way to deal with that is obviously to fix sget()...
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      acfec9a5
  5. 19 Jul, 2013 20 commits