- 18 May, 2018 8 commits
-
-
Anders Roxell authored
When running bpf's selftest test_xdp_meta.sh it fails: ./test_xdp_meta.sh Error: Specified qdisc not found. selftests: test_xdp_meta [FAILED] Need to enable CONFIG_NET_SCH_INGRESS and CONFIG_NET_CLS_ACT to get the test to pass. Fixes: 22c88526 ("bpf: improve selftests and add tests for meta pointer") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Rahul Lakkireddy authored
Correct the indirect register offsets in collecting TX rate limit info in UP CIM logs. Also, T5 doesn't support these indirect register offsets, so remove them from collection logic. Fixes: be6e36d9 ("cxgb4: collect TX rate limit info in UP CIM logs") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Hangbin reported an Oops triggered by the syzkaller qdisc rules: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: sch_red CPU: 0 PID: 28699 Comm: syz-executor5 Not tainted 4.17.0-rc4.kcov #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:qdisc_hash_add+0x26/0xa0 RSP: 0018:ffff8800589cf470 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff824ad971 RDX: 0000000000000007 RSI: ffffc9000ce9f000 RDI: 000000000000003c RBP: 0000000000000001 R08: ffffed000b139ea2 R09: ffff8800589cf4f0 R10: ffff8800589cf50f R11: ffffed000b139ea2 R12: ffff880054019fc0 R13: ffff880054019fb4 R14: ffff88005c0af600 R15: ffff880054019fb0 FS: 00007fa6edcb1700(0000) GS:ffff88005ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000740 CR3: 000000000fc16000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: red_change+0x2d2/0xed0 [sch_red] qdisc_create+0x57e/0xef0 tc_modify_qdisc+0x47f/0x14e0 rtnetlink_rcv_msg+0x6a8/0x920 netlink_rcv_skb+0x2a2/0x3c0 netlink_unicast+0x511/0x740 netlink_sendmsg+0x825/0xc30 sock_sendmsg+0xc5/0x100 ___sys_sendmsg+0x778/0x8e0 __sys_sendmsg+0xf5/0x1b0 do_syscall_64+0xbd/0x3b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x450869 RSP: 002b:00007fa6edcb0c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fa6edcb16b4 RCX: 0000000000450869 RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000008778 R14: 0000000000702838 R15: 00007fa6edcb1700 Code: e9 0b fe ff ff 0f 1f 44 00 00 55 53 48 89 fb 89 f5 e8 3f 07 f3 fe 48 8d 7b 3c 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 51 RIP: qdisc_hash_add+0x26/0xa0 RSP: ffff8800589cf470 When a red qdisc is updated with a 0 limit, the child qdisc is left unmodified, no additional scheduler is created in red_change(), the 'child' local variable is rightfully NULL and must not add it to the hash table. This change addresses the above issue moving qdisc_hash_add() right after the child qdisc creation. It additionally removes unneeded checks for noop_qdisc. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: 49b49971 ("net: sched: make default fifo qdiscs appear in the dump") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Eric Dumazet authored
We must not call sock_diag_has_destroy_listeners(sk) on a socket that has no reference on net structure. BUG: KASAN: use-after-free in sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline] BUG: KASAN: use-after-free in __sk_free+0x329/0x340 net/core/sock.c:1609 Read of size 8 at addr ffff88018a02e3a0 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.17.0-rc5+ #54 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline] __sk_free+0x329/0x340 net/core/sock.c:1609 sk_free+0x42/0x50 net/core/sock.c:1623 sock_put include/net/sock.h:1664 [inline] reqsk_free include/net/request_sock.h:116 [inline] reqsk_put include/net/request_sock.h:124 [inline] inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:672 [inline] reqsk_timer_handler+0xe27/0x10e0 net/ipv4/inet_connection_sock.c:739 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:525 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> RIP: 0010:native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:54 RSP: 0018:ffff8801d9ae7c38 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: 1ffff1003b35cf8a RCX: 0000000000000000 RDX: 1ffffffff11a30d0 RSI: 0000000000000001 RDI: ffffffff88d18680 RBP: ffff8801d9ae7c38 R08: ffffed003b5e46c3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff8801d9ae7cf0 R14: ffffffff897bef20 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0xc2/0x440 arch/x86/kernel/process.c:354 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:345 default_idle_call+0x6d/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x395/0x560 kernel/sched/idle.c:262 cpu_startup_entry+0x104/0x120 kernel/sched/idle.c:368 start_secondary+0x426/0x5b0 arch/x86/kernel/smpboot.c:269 secondary_startup_64+0xa5/0xb0 arch/x86/kernel/head_64.S:242 Allocated by task 4557: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 kmem_cache_zalloc include/linux/slab.h:691 [inline] net_alloc net/core/net_namespace.c:383 [inline] copy_net_ns+0x159/0x4c0 net/core/net_namespace.c:423 create_new_namespaces+0x69d/0x8f0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc3/0x1f0 kernel/nsproxy.c:206 ksys_unshare+0x708/0xf90 kernel/fork.c:2408 __do_sys_unshare kernel/fork.c:2476 [inline] __se_sys_unshare kernel/fork.c:2474 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2474 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 69: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 net_free net/core/net_namespace.c:399 [inline] net_drop_ns.part.14+0x11a/0x130 net/core/net_namespace.c:406 net_drop_ns net/core/net_namespace.c:405 [inline] cleanup_net+0x6a1/0xb20 net/core/net_namespace.c:541 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 The buggy address belongs to the object at ffff88018a02c140 which belongs to the cache net_namespace of size 8832 The buggy address is located 8800 bytes inside of 8832-byte region [ffff88018a02c140, ffff88018a02e3c0) The buggy address belongs to the page: page:ffffea0006280b00 count:1 mapcount:0 mapping:ffff88018a02c140 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000008100(slab|head) raw: 02fffc0000008100 ffff88018a02c140 0000000000000000 0000000100000001 raw: ffffea00062a1320 ffffea0006268020 ffff8801d9bdde40 0000000000000000 page dumped because: kasan: bad access detected Fixes: b922622e ("sock_diag: don't broadcast kernel sockets") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Craig Gallek <kraig@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since commit 9b5ba0df ("ARM: shmobile: Introduce ARCH_RENESAS") is CONFIG_ARCH_RENESAS a more appropriate platform check than the legacy CONFIG_ARCH_SHMOBILE, hence use the former. Renesas SuperH SH-Mobile SoCs are still covered by the CONFIG_CPU_SH4 check. This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Florian Fainelli authored
Even if commit 1d27732f ("net: dsa: setup and teardown ports") indicated that registering a devlink instance for unused ports is not a problem, and this is true, this can be confusing nonetheless, so let's not do it. Fixes: 1d27732f ("net: dsa: setup and teardown ports") Reported-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Amritha Nambiar authored
While removing queues from the XPS map, the individual CPU ID alone was used to index the CPUs map, this should be changed to also factor in the traffic class mapping for the CPU-to-queue lookup. Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes") Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix two bugs in sockmap, a use after free in sockmap's error path from sock_map_ctx_update_elem() where we mistakenly drop a reference we didn't take prior to that, and in the same function fix a race in bpf_prog_inc_not_zero() where we didn't use the progs from prior READ_ONCE(), from John. 2) Reject program expansions once we figure out that their jump target which crosses patchlet boundaries could otherwise get truncated in insn->off space, from Daniel. 3) Check the return value of fopen() in BPF selftest's test_verifier where we determine whether unpriv BPF is disabled, and iff we do fail there then just assume it is disabled. This fixes a segfault when used with older kernels, from Jesper. ==================== Signed-off-by:
-
- 17 May, 2018 20 commits
-
-
Daniel Borkmann authored
Recently during testing, I ran into the following panic: [ 207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP [ 207.901637] Modules linked in: binfmt_misc [...] [ 207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G W 4.17.0-rc3+ #7 [ 207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017 [ 207.982428] pstate: 60400005 (nZCv daif +PAN -UAO) [ 207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0 [ 207.992603] lr : 0xffff000000bdb754 [ 207.996080] sp : ffff000013703ca0 [ 207.999384] x29: ffff000013703ca0 x28: 0000000000000001 [ 208.004688] x27: 0000000000000001 x26: 0000000000000000 [ 208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00 [ 208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000 [ 208.020599] x21: fffffffffeff2a6f x20: 000000000000000a [ 208.025903] x19: ffff000009578000 x18: 0000000000000a03 [ 208.031206] x17: 0000000000000000 x16: 0000000000000000 [ 208.036510] x15: 0000ffff9de83000 x14: 0000000000000000 [ 208.041813] x13: 0000000000000000 x12: 0000000000000000 [ 208.047116] x11: 0000000000000001 x10: ffff0000089e7f18 [ 208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000 [ 208.057723] x7 : 000000000000000a x6 : 00280c6160000000 [ 208.063026] x5 : 0000000000000018 x4 : 0000000000007db6 [ 208.068329] x3 : 000000000008647a x2 : 19868179b1484500 [ 208.073632] x1 : 0000000000000000 x0 : ffff000009578c08 [ 208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974) [ 208.086235] Call trace: [ 208.088672] bpf_skb_load_helper_8_no_cache+0x34/0xc0 [ 208.093713] 0xffff000000bdb754 [ 208.096845] bpf_test_run+0x78/0xf8 [ 208.100324] bpf_prog_test_run_skb+0x148/0x230 [ 208.104758] sys_bpf+0x314/0x1198 [ 208.108064] el0_svc_naked+0x30/0x34 [ 208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680) [ 208.117717] ---[ end trace 263cb8a59b5bf29f ]--- The program itself which caused this had a long jump over the whole instruction sequence where all of the inner instructions required heavy expansions into multiple BPF instructions. Additionally, I also had BPF hardening enabled which requires once more rewrites of all constant values in order to blind them. Each time we rewrite insns, bpf_adj_branches() would need to potentially adjust branch targets which cross the patchlet boundary to accommodate for the additional delta. Eventually that lead to the case where the target offset could not fit into insn->off's upper 0x7fff limit anymore where then offset wraps around becoming negative (in s16 universe), or vice versa depending on the jump direction. Therefore it becomes necessary to detect and reject any such occasions in a generic way for native eBPF and cBPF to eBPF migrations. For the latter we can simply check bounds in the bpf_convert_filter()'s BPF_EMIT_JMP helper macro and bail out once we surpass limits. The bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case of subsequent hardening) is a bit more complex in that we need to detect such truncations before hitting the bpf_prog_realloc(). Thus the latter is split into an extra pass to probe problematic offsets on the original program in order to fail early. With that in place and carefully tested I no longer hit the panic and the rewrites are rejected properly. The above example panic I've seen on bpf-next, though the issue itself is generic in that a guard against this issue in bpf seems more appropriate in this case. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
In the sockmap design BPF programs (SK_SKB_STREAM_PARSER, SK_SKB_STREAM_VERDICT and SK_MSG_VERDICT) are attached to the sockmap map type and when a sock is added to the map the programs are used by the socket. However, sockmap updates from both userspace and BPF programs can happen concurrently with the attach and detach of these programs. To resolve this we use the bpf_prog_inc_not_zero and a READ_ONCE() primitive to ensure the program pointer is not refeched and possibly NULL'd before the refcnt increment. This happens inside a RCU critical section so although the pointer reference in the map object may be NULL (by a concurrent detach operation) the reference from READ_ONCE will not be free'd until after grace period. This ensures the object returned by READ_ONCE() is valid through the RCU criticl section and safe to use as long as we "know" it may be free'd shortly. Daniel spotted a case in the sock update API where instead of using the READ_ONCE() program reference we used the pointer from the original map, stab->bpf_{verdict|parse|txmsg}. The problem with this is the logic checks the object returned from the READ_ONCE() is not NULL and then tries to reference the object again but using the above map pointer, which may have already been NULL'd by a parallel detach operation. If this happened bpf_porg_inc_not_zero could dereference a NULL pointer. Fix this by using variable returned by READ_ONCE() that is checked for NULL. Fixes: 2f857d04 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Reported-by:John Fastabend <john.fastabend@gmail.com> Acked-by:
-
John Fastabend authored
If the user were to only attach one of the parse or verdict programs then it is possible a subsequent sockmap update could incorrectly decrement the refcnt on the program. This happens because in the rollback logic, after an error, we have to decrement the program reference count when its been incremented. However, we only increment the program reference count if the user has both a verdict and a parse program. The reason for this is because, at least at the moment, both are required for any one to be meaningful. The problem fixed here is in the rollback path we decrement the program refcnt even if only one existing. But we never incremented the refcnt in the first place creating an imbalance. This patch fixes the error path to handle this case. Fixes: 2f857d04 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Reported-by:
-
Willem de Bruijn authored
Device features may change during transmission. In particular with corking, a device may toggle scatter-gather in between allocating and writing to an skb. Do not unconditionally assume that !NETIF_F_SG at write time implies that the same held at alloc time and thus the skb has sufficient tailroom. This issue predates git history. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
David S. Miller authored
Petr Machata says: ==================== net: ip6_gre: Fixes in headroom handling This series mends some problems in headroom management in ip6_gre module. The current code base has the following three closely-related problems: - ip6gretap tunnels neglect to ensure there's enough writable headroom before pushing GRE headers. - ip6erspan does this, but assumes that dev->needed_headroom is primed. But that doesn't happen until ip6_tnl_xmit() is called later. Thus for the first packet, ip6erspan actually behaves like ip6gretap above. - ip6erspan shares some of the code with ip6gretap, including calculations of needed header length. While there is custom ERSPAN-specific code for calculating the headroom, the computed values are overwritten by the ip6gretap code. The first two issues lead to a kernel panic in situations where a packet is mirrored from a veth device to the device in question. They are fixed, respectively, in patches #1 and #2, which include the full panic trace and a reproducer. The rest of the patchset deals with the last issue. In patches #3 to #6, several functions are split up into reusable parts. Finally in patch #7 these blocks are used to compose ERSPAN-specific callbacks where necessary to fix the hlen calculation. ==================== Signed-off-by: -
Petr Machata authored
Even though ip6erspan_tap_init() sets up hlen and tun_hlen according to what ERSPAN needs, it goes ahead to call ip6gre_tnl_link_config() which overwrites these settings with GRE-specific ones. Similarly for changelink callbacks, which are handled by ip6gre_changelink() calls ip6gre_tnl_change() calls ip6gre_tnl_link_config() as well. The difference ends up being 12 vs. 20 bytes, and this is generally not a problem, because a 12-byte request likely ends up allocating more and the extra 8 bytes are thus available. However correct it is not. So replace the newlink and changelink callbacks with an ERSPAN-specific ones, reusing the newly-introduced _common() functions. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Petr Machata authored
Extract from ip6gre_changelink() a reusable function ip6gre_changelink_common(). This will allow introduction of ERSPAN-specific _changelink() function with not a lot of code duplication. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Petr Machata authored
Extract from ip6gre_newlink() a reusable function ip6gre_newlink_common(). The ip6gre_tnl_link_config() call needs to be made customizable for ERSPAN, thus reorder it with calls to ip6_tnl_change_mtu() and dev_hold(), and extract the whole tail to the caller, ip6gre_newlink(). Thus enable an ERSPAN-specific _newlink() function without a lot of duplicity. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Petr Machata authored
Split a reusable function ip6gre_tnl_copy_tnl_parm() from ip6gre_tnl_change(). This will allow ERSPAN-specific code to reuse the common parts while customizing the behavior for ERSPAN. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Petr Machata authored
The function ip6gre_tnl_link_config() is used for setting up configuration of both ip6gretap and ip6erspan tunnels. Split the function into the common part and the route-lookup part. The latter then takes the calculated header length as an argument. This split will allow the patches down the line to sneak in a custom header length computation for the ERSPAN tunnel. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Petr Machata authored
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts out zero. Thus the call to skb_cow_head() fails to actually make sure there's enough headroom to push the ERSPAN headers to. That can lead to the panic cited below. (Reproducer below that). Fix by requesting either needed_headroom if already primed, or just the bare minimum needed for the header otherwise. [ 190.703567] kernel BUG at net/core/skbuff.c:104! [ 190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld [ 190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10 [ 190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 190.747006] Workqueue: ipv6_addrconf addrconf_dad_work [ 190.752222] RIP: 0010:skb_panic+0xc3/0x100 [ 190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282 [ 190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000 [ 190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54 [ 190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19 [ 190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe [ 190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8 [ 190.797621] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000 [ 190.805786] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0 [ 190.818790] Call Trace: [ 190.821264] <IRQ> [ 190.823314] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.828940] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.834562] skb_push+0x78/0x90 [ 190.837749] ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.843219] ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre] [ 190.848577] ? debug_check_no_locks_freed+0x210/0x210 [ 190.853679] ? debug_check_no_locks_freed+0x210/0x210 [ 190.858783] ? print_irqtrace_events+0x120/0x120 [ 190.863451] ? sched_clock_cpu+0x18/0x210 [ 190.867496] ? cyc2ns_read_end+0x10/0x10 [ 190.871474] ? skb_network_protocol+0x76/0x200 [ 190.875977] dev_hard_start_xmit+0x137/0x770 [ 190.880317] ? do_raw_spin_trylock+0x6d/0xa0 [ 190.884624] sch_direct_xmit+0x2ef/0x5d0 [ 190.888589] ? pfifo_fast_dequeue+0x3fa/0x670 [ 190.892994] ? pfifo_fast_change_tx_queue_len+0x810/0x810 [ 190.898455] ? __lock_is_held+0xa0/0x160 [ 190.902422] __qdisc_run+0x39e/0xfc0 [ 190.906041] ? _raw_spin_unlock+0x29/0x40 [ 190.910090] ? pfifo_fast_enqueue+0x24b/0x3e0 [ 190.914501] ? sch_direct_xmit+0x5d0/0x5d0 [ 190.918658] ? pfifo_fast_dequeue+0x670/0x670 [ 190.923047] ? __dev_queue_xmit+0x172/0x1770 [ 190.927365] ? preempt_count_sub+0xf/0xd0 [ 190.931421] __dev_queue_xmit+0x410/0x1770 [ 190.935553] ? ___slab_alloc+0x605/0x930 [ 190.939524] ? print_irqtrace_events+0x120/0x120 [ 190.944186] ? memcpy+0x34/0x50 [ 190.947364] ? netdev_pick_tx+0x1c0/0x1c0 [ 190.951428] ? __skb_clone+0x2fd/0x3d0 [ 190.955218] ? __copy_skb_header+0x270/0x270 [ 190.959537] ? rcu_read_lock_sched_held+0x93/0xa0 [ 190.964282] ? kmem_cache_alloc+0x344/0x4d0 [ 190.968520] ? cyc2ns_read_end+0x10/0x10 [ 190.972495] ? skb_clone+0x123/0x230 [ 190.976112] ? skb_split+0x820/0x820 [ 190.979747] ? tcf_mirred+0x554/0x930 [act_mirred] [ 190.984582] tcf_mirred+0x554/0x930 [act_mirred] [ 190.989252] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred] [ 190.996109] ? __lock_acquire+0x706/0x26e0 [ 191.000239] ? sched_clock_cpu+0x18/0x210 [ 191.004294] tcf_action_exec+0xcf/0x2a0 [ 191.008179] tcf_classify+0xfa/0x340 [ 191.011794] __netif_receive_skb_core+0x8e1/0x1c60 [ 191.016630] ? debug_check_no_locks_freed+0x210/0x210 [ 191.021732] ? nf_ingress+0x500/0x500 [ 191.025458] ? process_backlog+0x347/0x4b0 [ 191.029619] ? print_irqtrace_events+0x120/0x120 [ 191.034302] ? lock_acquire+0xd8/0x320 [ 191.038089] ? process_backlog+0x1b6/0x4b0 [ 191.042246] ? process_backlog+0xc2/0x4b0 [ 191.046303] process_backlog+0xc2/0x4b0 [ 191.050189] net_rx_action+0x5cc/0x980 [ 191.053991] ? napi_complete_done+0x2c0/0x2c0 [ 191.058386] ? mark_lock+0x13d/0xb40 [ 191.062001] ? clockevents_program_event+0x6b/0x1d0 [ 191.066922] ? print_irqtrace_events+0x120/0x120 [ 191.071593] ? __lock_is_held+0xa0/0x160 [ 191.075566] __do_softirq+0x1d4/0x9d2 [ 191.079282] ? ip6_finish_output2+0x524/0x1460 [ 191.083771] do_softirq_own_stack+0x2a/0x40 [ 191.087994] </IRQ> [ 191.090130] do_softirq.part.13+0x38/0x40 [ 191.094178] __local_bh_enable_ip+0x135/0x190 [ 191.098591] ip6_finish_output2+0x54d/0x1460 [ 191.102916] ? ip6_forward_finish+0x2f0/0x2f0 [ 191.107314] ? ip6_mtu+0x3c/0x2c0 [ 191.110674] ? ip6_finish_output+0x2f8/0x650 [ 191.114992] ? ip6_output+0x12a/0x500 [ 191.118696] ip6_output+0x12a/0x500 [ 191.122223] ? ip6_route_dev_notify+0x5b0/0x5b0 [ 191.126807] ? ip6_finish_output+0x650/0x650 [ 191.131120] ? ip6_fragment+0x1a60/0x1a60 [ 191.135182] ? icmp6_dst_alloc+0x26e/0x470 [ 191.139317] mld_sendpack+0x672/0x830 [ 191.143021] ? igmp6_mcf_seq_next+0x2f0/0x2f0 [ 191.147429] ? __local_bh_enable_ip+0x77/0x190 [ 191.151913] ipv6_mc_dad_complete+0x47/0x90 [ 191.156144] addrconf_dad_completed+0x561/0x720 [ 191.160731] ? addrconf_rs_timer+0x3a0/0x3a0 [ 191.165036] ? mark_held_locks+0xc9/0x140 [ 191.169095] ? __local_bh_enable_ip+0x77/0x190 [ 191.173570] ? addrconf_dad_work+0x50d/0xa20 [ 191.177886] ? addrconf_dad_work+0x529/0xa20 [ 191.182194] addrconf_dad_work+0x529/0xa20 [ 191.186342] ? addrconf_dad_completed+0x720/0x720 [ 191.191088] ? __lock_is_held+0xa0/0x160 [ 191.195059] ? process_one_work+0x45d/0xe20 [ 191.199302] ? process_one_work+0x51e/0xe20 [ 191.203531] ? rcu_read_lock_sched_held+0x93/0xa0 [ 191.208279] process_one_work+0x51e/0xe20 [ 191.212340] ? pwq_dec_nr_in_flight+0x200/0x200 [ 191.216912] ? get_lock_stats+0x4b/0xf0 [ 191.220788] ? preempt_count_sub+0xf/0xd0 [ 191.224844] ? worker_thread+0x219/0x860 [ 191.228823] ? do_raw_spin_trylock+0x6d/0xa0 [ 191.233142] worker_thread+0xeb/0x860 [ 191.236848] ? process_one_work+0xe20/0xe20 [ 191.241095] kthread+0x206/0x300 [ 191.244352] ? process_one_work+0xe20/0xe20 [ 191.248587] ? kthread_stop+0x570/0x570 [ 191.252459] ret_from_fork+0x3a/0x50 [ 191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24 [ 191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0 [ 191.281024] ---[ end trace 7ea51094e099e006 ]--- [ 191.285724] Kernel panic - not syncing: Fatal exception in interrupt [ 191.292168] Kernel Offset: disabled [ 191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reproducer: ip link add h1 type veth peer name swp1 ip link add h3 type veth peer name swp3 ip link set dev h1 up ip address add 192.0.2.1/28 dev h1 ip link add dev vh3 type vrf table 20 ip link set dev h3 master vh3 ip link set dev vh3 up ip link set dev h3 up ip link set dev swp3 up ip address add dev swp3 2001:db8:2::1/64 ip link set dev swp1 up tc qdisc add dev swp1 clsact ip link add name gt6 type ip6erspan \ local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123 ip link set dev gt6 up sleep 1 tc filter add dev swp1 ingress pref 1000 matchall skip_hw \ action mirred egress mirror dev gt6 ping -I h1 192.0.2.2 Fixes: e41c7c68 ("ip6erspan: make sure enough headroom at xmit.") Signed-off-by:
-
Petr Machata authored
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit() for generic IP-in-IP processing. However it doesn't make sure that there is enough headroom to push the header to. That can lead to the panic cited below. (Reproducer below that). Fix by requesting either needed_headroom if already primed, or just the bare minimum needed for the header otherwise. [ 158.576725] kernel BUG at net/core/skbuff.c:104! [ 158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld [ 158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10 [ 158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 158.620426] RIP: 0010:skb_panic+0xc3/0x100 [ 158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286 [ 158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000 [ 158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18 [ 158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19 [ 158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66 [ 158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68 [ 158.666007] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000 [ 158.674212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0 [ 158.687228] Call Trace: [ 158.689752] ? __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.694475] ? __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.699141] skb_push+0x78/0x90 [ 158.702344] __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.706872] ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre] [ 158.711992] ? __gre6_xmit+0xd80/0xd80 [ip6_gre] [ 158.716668] ? debug_check_no_locks_freed+0x210/0x210 [ 158.721761] ? print_irqtrace_events+0x120/0x120 [ 158.726461] ? sched_clock_cpu+0x18/0x210 [ 158.730572] ? sched_clock_cpu+0x18/0x210 [ 158.734692] ? cyc2ns_read_end+0x10/0x10 [ 158.738705] ? skb_network_protocol+0x76/0x200 [ 158.743216] ? netif_skb_features+0x1b2/0x550 [ 158.747648] dev_hard_start_xmit+0x137/0x770 [ 158.752010] sch_direct_xmit+0x2ef/0x5d0 [ 158.755992] ? pfifo_fast_dequeue+0x3fa/0x670 [ 158.760460] ? pfifo_fast_change_tx_queue_len+0x810/0x810 [ 158.765975] ? __lock_is_held+0xa0/0x160 [ 158.770002] __qdisc_run+0x39e/0xfc0 [ 158.773673] ? _raw_spin_unlock+0x29/0x40 [ 158.777781] ? pfifo_fast_enqueue+0x24b/0x3e0 [ 158.782191] ? sch_direct_xmit+0x5d0/0x5d0 [ 158.786372] ? pfifo_fast_dequeue+0x670/0x670 [ 158.790818] ? __dev_queue_xmit+0x172/0x1770 [ 158.795195] ? preempt_count_sub+0xf/0xd0 [ 158.799313] __dev_queue_xmit+0x410/0x1770 [ 158.803512] ? ___slab_alloc+0x605/0x930 [ 158.807525] ? ___slab_alloc+0x605/0x930 [ 158.811540] ? memcpy+0x34/0x50 [ 158.814768] ? netdev_pick_tx+0x1c0/0x1c0 [ 158.818895] ? __skb_clone+0x2fd/0x3d0 [ 158.822712] ? __copy_skb_header+0x270/0x270 [ 158.827079] ? rcu_read_lock_sched_held+0x93/0xa0 [ 158.831903] ? kmem_cache_alloc+0x344/0x4d0 [ 158.836199] ? skb_clone+0x123/0x230 [ 158.839869] ? skb_split+0x820/0x820 [ 158.843521] ? tcf_mirred+0x554/0x930 [act_mirred] [ 158.848407] tcf_mirred+0x554/0x930 [act_mirred] [ 158.853104] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred] [ 158.860005] ? __lock_acquire+0x706/0x26e0 [ 158.864162] ? mark_lock+0x13d/0xb40 [ 158.867832] tcf_action_exec+0xcf/0x2a0 [ 158.871736] tcf_classify+0xfa/0x340 [ 158.875402] __netif_receive_skb_core+0x8e1/0x1c60 [ 158.880334] ? nf_ingress+0x500/0x500 [ 158.884059] ? process_backlog+0x347/0x4b0 [ 158.888241] ? lock_acquire+0xd8/0x320 [ 158.892050] ? process_backlog+0x1b6/0x4b0 [ 158.896228] ? process_backlog+0xc2/0x4b0 [ 158.900291] process_backlog+0xc2/0x4b0 [ 158.904210] net_rx_action+0x5cc/0x980 [ 158.908047] ? napi_complete_done+0x2c0/0x2c0 [ 158.912525] ? rcu_read_unlock+0x80/0x80 [ 158.916534] ? __lock_is_held+0x34/0x160 [ 158.920541] __do_softirq+0x1d4/0x9d2 [ 158.924308] ? trace_event_raw_event_irq_handler_exit+0x140/0x140 [ 158.930515] run_ksoftirqd+0x1d/0x40 [ 158.934152] smpboot_thread_fn+0x32b/0x690 [ 158.938299] ? sort_range+0x20/0x20 [ 158.941842] ? preempt_count_sub+0xf/0xd0 [ 158.945940] ? schedule+0x5b/0x140 [ 158.949412] kthread+0x206/0x300 [ 158.952689] ? sort_range+0x20/0x20 [ 158.956249] ? kthread_stop+0x570/0x570 [ 158.960164] ret_from_fork+0x3a/0x50 [ 158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24 [ 158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110 [ 158.988935] ---[ end trace 5af56ee845aa6cc8 ]--- [ 158.993641] Kernel panic - not syncing: Fatal exception in interrupt [ 159.000176] Kernel Offset: disabled [ 159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reproducer: ip link add h1 type veth peer name swp1 ip link add h3 type veth peer name swp3 ip link set dev h1 up ip address add 192.0.2.1/28 dev h1 ip link add dev vh3 type vrf table 20 ip link set dev h3 master vh3 ip link set dev vh3 up ip link set dev h3 up ip link set dev swp3 up ip address add dev swp3 2001:db8:2::1/64 ip link set dev swp1 up tc qdisc add dev swp1 clsact ip link add name gt6 type ip6gretap \ local 2001:db8:2::1 remote 2001:db8:2::2 ip link set dev gt6 up sleep 1 tc filter add dev swp1 ingress pref 1000 matchall skip_hw \ action mirred egress mirror dev gt6 ping -I h1 192.0.2.2 Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
-
Jesper Dangaard Brouer authored
Commit 0a674874 ("selftests/bpf: Only run tests if !bpf_disabled") forgot to check return value of fopen. This caused some confusion, when running test_verifier (from tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will simply seqfault. This fix avoids the segfault and prints an error, but allow program to continue. Given the sysctl was introduced in 1be7f75d ("bpf: enable non-root eBPF programs"), we know that the running kernel cannot support unpriv, thus continue with unpriv_disabled = true. Fixes: 0a674874 ("selftests/bpf: Only run tests if !bpf_disabled") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
William Tu authored
ERSPAN only support version 1 and 2. When packets send to an erspan device which does not have proper version number set, drop the packet. In real case, we observe multicast packets sent to the erspan pernet device, erspan0, which does not have erspan version configured. Reported-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Fix bugs and memory leaks This is a small patch series fixing up some bugs and memory leaks in the ibmvnic driver. The first fix frees up previously allocated memory that should be freed in case of an error. The second fixes a reset case that was failing due to TX/RX queue IRQ's being erroneously disabled without being enabled again. The final patch fixes incorrect reallocated of statistics buffers during a device reset, resulting in loss of statistics information and a memory leak. ==================== Signed-off-by: -
Thomas Falcon authored
Move initialization of statistics buffers from ibmvnic_init function into ibmvnic_probe. In the current state, ibmvnic_init will be called again during a device reset, resulting in the allocation of new buffers without freeing the old ones. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
It is not necessary to disable interrupt lines here during a reset to handle a non-fatal firmware error. Move that call within the code block that handles the other cases that do require interrupts to be disabled and re-enabled. Signed-off-by:
-
Thomas Falcon authored
If the firmware map fails for whatever reason, remember to free up the memory after. Signed-off-by:
-
David Ahern authored
Updating the FIB tracepoint for the recent change to allow rules using the protocol and ports exposed a few places where the entries in the flow struct are not initialized. For __fib_validate_source add the call to fib4_rules_early_flow_dissect since it is invoked for the input path. For netfilter, add the memset on the flow struct to avoid future problems like this. In ip_route_input_slow need to set the fields if the skb dissection does not happen. Fixes: bfff4862 ("net: fib_rules: support for match on ip_proto, sport and dport") Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Matt Mullins authored
scatterlist code expects virt_to_page() to work, which fails with CONFIG_VMAP_STACK=y. Fixes: c46234eb ("tls: RX path for ktls") Signed-off-by:
Matt Mullins <mmullins@fb.com> Signed-off-by:
-
- 16 May, 2018 12 commits
-
-
Jason Wang authored
After commit b196d88a ("tun: fix use after free for ptr_ring") we need clean up tx ring during release(). But unfortunately, it tries to do the cleanup blindly after socket were destroyed which will lead another use-after-free. Fix this by doing the cleanup before dropping the last reference of the socket in __tun_detach(). Reported-by:
Andrei Vagin <avagin@virtuozzo.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed: LL2 fixes This series fixes some issues in ll2 related to synchronization and resource freeing ==================== Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Michal Kalderon authored
Stress on qedi/qedr load unload lead to list_del corruption. This is due to ll2 connection terminate freeing resources without verifying that no more ll2 processing will occur. This patch unregisters the ll2 status block before terminating the connection to assure this race does not occur. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by:
-
Michal Kalderon authored
The ll2 flows of flushing the txq/rxq need to be synchronized with the regular fp processing. Caused list corruption during load/unload stress tests. Fixes: 0a7fb11c ("qed: Add Light L2 support") Signed-off-by:
-
Michal Kalderon authored
Driver should free all pending isles once it gets a FLUSH cqe from FW. Part of iSCSI out of order flow. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by:
-
Davide Caratti authored
Similarly to what was done with commit a52956df ("net sched actions: fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given. Fixes: 5026c9b1 ("net sched: vlan action fix late binding") CC: Roman Mashak <mrv@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Geert Uytterhoeven authored
The configuration settings for RBTX4927 were accidentally removed, leading to a silently broken network interface. Re-add the missing settings to fix this. Fixes: 8eb97ff5 ("net: 8390: remove m32r specific bits") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: CFP fixes This patch series fixes a number of usability issues with the SF2 Compact Field Processor code: - we would not be properly bound checking the location when we let the kernel automatically place rules with RX_CLS_LOC_ANY - when using IPv6 rules and user space specifies a location identifier we would be off by one in what the chain ID (within the Broadcom tag) indicates - it would be possible to delete one of the two slices of an IPv6 while leaving the other one programming leading to various problems ==================== Signed-off-by: -
Florian Fainelli authored
It was possible to delete only one half of an IPv6, which would leave the second half still programmed and possibly in use. Instead of checking for the unused bitmap, we need to check the unique bitmap, and refuse any deletion that does not match that criteria. We also need to move that check from bcm_sf2_cfp_rule_del_one() into its caller: bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second halves anymore that would not pass the first test. Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by:
-
Florian Fainelli authored
We had several issues that would make the programming of IPv6 rules both inconsistent and error prone: - the chain ID that we would be asking the hardware to put in the packet's Broadcom tag would be off by one, it would return one of the two indexes, but not the one user-space specified - when an user specified a particular location to insert a CFP rule at, we would not be returning the same index, which would be confusing if nothing else - finally, like IPv4, it would be possible to overflow the last entry by re-programming it Fix this by swapping the usage of rule_index[0] and rule_index[1] where relevant in order to return a consistent and correct user-space experience. Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by:
-
Florian Fainelli authored
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we would be able to overwrite the last rules because of a number of issues. The IPv4 code path would not be checking that rule_index is within bounds, and it would also only be allowed to pick up rules from range 0..126 instead of the full 0..127 range. This would lead us to allow overwriting the last rule when we let the kernel pick-up the location. Fixes: 33061458 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions") Signed-off-by:
-
Markus Niebel authored
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be used as reference clock for the MAC unit. The clock signal must meet the RGMII requirements to ensure the correct data transmission between the MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle requirement if the phy is configured as slave. For a complete describtion look at the errata sheets: DS80000691D or DS80000692D. The errata sheet recommends to force the phy into master mode whenever there is a 1000Base-T link-up as work around. Only set the "micrel,force-master" property if you use the phy reference clock provided by CLK125_NDO pin as MAC reference clock in your application. Attenation, this workaround is only usable if the link partner can be configured to slave mode for 1000Base-T. Signed-off-by:
Markus Niebel <Markus.Niebel@tqs.de> [m.felsch@pengutronix.de: fix dt-binding documentation] [m.felsch@pengutronix.de: use already existing result var for read/write] [m.felsch@pengutronix.de: add error handling] [m.felsch@pengutronix.de: add more comments] Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
