- 19 Apr, 2013 4 commits
-
-
Olof Johansson authored
* at91/soc: ARM: at91: add defconfig for SAMA5 ARM: at91: dt: add device tree files for SAMA5D3 family ARM: at91: introduce SAMA5 support ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation ARM: at91: change name template in AT91_SOC_START macro ARM: at91: renamme rm9200 dt file ARM: at91: rename board-dt to more specific name board-dt-sam9 ARM: at91: move non DT Kconfig to Kconfig.non_dt
-
Olof Johansson authored
Merge tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup From Tony Lindgren: Display related clean-up from Tomi Valkeinen. These were separated from the DSS driver changes to leave out a dependency between the driver and arch/arm related code. * tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm: dss-common: don't use reset_gpio from omap4_panda_dvi_device arm: omap boards: Remove unnecessary platform_enable/disable callbacks for VENC devices arm: omap: dss-common: use picodlp panel's gpio handling arm: omap: board-omap3pandora: use tpo panel's gpio handling arm: omap: board-zoom: use NEC panel's gpio handling arm: omap: board-rx-51: use acx565akm panel's gpio handling arm: omap: board-sdp3430: use sharp panel's gpio handling arm: omap: board-omap3evm: use sharp panel's gpio handling arm: omap: board-overo: use lb035q02 dpi panel's gpio handling arm: omap: board-ldp: use generic dpi panel's gpio handling arm: omap: board-am3517: use generic dpi panel's gpio handling arm: omap: board-cm-t35: use generic dpi panel's gpio handling arm: omap: board-devkit8000: use generic dpi panel's gpio handling arm: omap: board-2430: use generic dpi panel's gpio handling ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight OMAPDSS: add fields to panels' platform data OMAPDSS: panels: keep platform data of all panels in a single header Conflicts: arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-zoom-display.c
-
Olof Johansson authored
* omap/boards: ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration
-
Olof Johansson authored
* omap/fixes-non-critical: ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0 ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry ARM: OMAP: fix typo "CONFIG_SMC91x_MODULE" ARM: OMAP5: clock: No Freqsel on OMAP5 devices too ARM: OMAP5: Make errata i688 workaround available ARM: OMAP5: Update SAR memory layout for WakeupGen ARM: OMAP5: Update SAR RAM base address ARM: OMAP5: Reuse prm read_inst/write_inst ARM: OMAP5: prm: Allow prm init to succeed ARM: OMAP5: timer: Update the clocksource name as per clock data ARM: OMAP5: Update SOC id detection code for ES2
-
- 18 Apr, 2013 2 commits
-
-
git://git.infradead.org/users/jcooper/linuxOlof Johansson authored
From Jason Cooper: mvebu driver irqchip for v3.10 - move the armada irqchip driver to drivers/irqchip/ * tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux: irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Tony Lindgren authored
Merge branch '3.10-lo/board-cleanup' of git://gitorious.org/linux-omap-dss2/linux into omap-for-v3.10/dss
-
- 15 Apr, 2013 4 commits
-
-
Thomas Petazzoni authored
In preparation for the introduction of MSI support in the IRQ controller driver, we clarify the implementation of IPI using additional defines for the manipulation of doorbells. Just like IPIs are implemented using doorbells, MSIs will also use doorbells, so it makes sense to do this preparatory cleanup first. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Thomas Petazzoni authored
If we move the IRQ handler function above the initialization function, we avoid a forward declaration. This wasn't done as part of the previous commit, in order to increase the readibility of the previous commit, who was also moving the IRQ controller driver from arch/arm to drivers/irqchip. Signed-off-by:
-
Thomas Petazzoni authored
When the Marvell Armada 370/XP support was included in the kernel, the drivers/irqchip/ directory didn't exist and the minimal infrastructure in it also didn't exist. Now that we have those things in place, we move the Armada 370/XP IRQ controller driver from arch/arm/mach-mvebu/irq-armada-370-xp.c to drivers/irqchip/irq-armada-370-xp.c. Note in order to reduce code movement and therefore ease the review of this patch, we intentionally introduce a forward declaration of armada_370_xp_handle_irq(). It is in fact not needed because this handler can now simply be implemented before armada_370_xp_mpic_of_init(). That will be done in the next commit. Signed-off-by:
-
Thomas Petazzoni authored
In preparation for moving the IRQ controller driver to drivers/irqchip/, we don't want the IRQ controller driver to be responsible for initializing the L2 cache. Instead, let's initialize the L2 cache at the init_early() level, like mach-exynos/common.c is doing. Signed-off-by:
-
- 08 Apr, 2013 8 commits
-
-
Andrew Chew authored
The pwm-backlight driver now takes a mandatory regulator that is gotten during driver probe. Initialize a dummy regulator to satisfy this requirement. Signed-off-by:
Andrew Chew <achew@nvidia.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated fixed regulator id to avoid errors] Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Use pwm_leds driver for the keyboard light and pwm-backlight for the lcd backlight control (instead of implementing the PWM driver part in the board file). Signed-off-by:
-
Ruslan Bilovol authored
This patch enables BMP085 pressure sensor that can be found on OMAP4 Blaze Tablet development platform Signed-off-by:
Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by:
-
Paul Bolle authored
Merge commit 95241450 ("Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc") added references to CONFIG_MACH_PCM049 and board-omap4pcm049.o to this Makefile. But there's no Kconfig symbol MACH_PCM049 and there's no file board-omap4pcm049.c. This line can safely be removed. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Paul Bolle authored
Commit f41caddb ("omap2+: Use Kconfig symbol in Makefile instead of obj-y") reorganized this Makefile. But, for some reason, it also added references to CONFIG_MACH_ENCORE and board-omap3encore.o. But there's no Kconfig symbol MACH_ENCORE and there's no file board-omap3encore.c. This line can safely be removed. Signed-off-by:
-
Aaro Koskinen authored
Add missing regulator definitions for lis3lv02d accelerometer. Fixes the following probe issue: [ 57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517 [ 57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral Reported-by:
Pali Rohár <pali.rohar@gmail.com> Reviewed-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Linus Torvalds authored
-
- 07 Apr, 2013 7 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Gleb Natapov: "Bugfix for the regression introduced by commit c300aa64" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Allow cross page reads and writes from cached translations.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Two quite small fixes: one a build problem, and the other fixes seccomp filters on x32." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix rebuild with EFI_STUB enabled x86: remove the x32 syscall bitmask from syscall_get_nr()
-
Will Deacon authored
Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Reviewed-by: -
Will Deacon authored
Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Thorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by:
-
Jay Estabrook authored
Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by:
Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by:
-
Andrew Honig authored
This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com>
-
- 06 Apr, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images
-
- 05 Apr, 2013 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ... -
Jan Beulich authored
eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by:
Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett <mjg@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com>
-
Patrick McHardy authored
Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull GFS2 fixes from Steven Whitehouse: "There are two patches which fix up a couple of minor issues in the DLM interface code, a missing error path in gfs2_rs_alloc(), one patch which fixes a problem during "withdraw" and a fix for discards/FITRIM when using 4k sector sized devices." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Issue discards in 512b sectors GFS2: Fix unlock of fcntl locks during withdrawn state GFS2: return error if malloc failed in gfs2_rs_alloc() GFS2: use memchr_inv GFS2: use kmalloc for lvb bitmap
-
Mike Marciniszyn authored
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/miscLinus Torvalds authored
Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
-
Bob Peterson authored
This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com>
-
Johan Hovold authored
This reverts commit 0ef1594c. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains slightly more volumes than usual at this stage, mostly because of my vacation in the last week. Nothing to scare, all small and/or trivial fixes: - Fix loop path handling in ASoC DAPM - Some memory handling fixes in ASoC core - Fix spear_pcm to adapt to the updated API - HD-audio HDMI ELD handling fixes - Fix for CM6331 USB-audio SRC change bugs - Revert power_save_controller option change due to user-space usage - A few other small ASoC and HD-audio fixes" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/generic - fix uninitialized variable Revert "ALSA: hda - Allow power_save_controller option override DCAPS" ALSA: hda - fix typo in proc output ALSA: hda - Enabling Realtek ALC 671 codec ALSA: usb: Work around CM6631 sample rate change bug ALSA: hda - bug fix on HDMI ELD debug message ALSA: hda - bug fix on return value when getting HDMI ELD info ASoC: dma-sh7760: Fix compile error ASoC: core: fix invalid free of devm_ allocated data ASoC: spear_pcm: Update to new pcm_new() API ASoC:: max98090: Remove executable bit ASoC: dapm: Fix pointer dereference in is_connected_output_ep() ASoC: pcm030 audio fabric: remove __init from probe ASoC: imx-ssi: Fix occasional AC97 reset failure ASoC: core: fix possible memory leak in snd_soc_bytes_put() ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff() ASoC: dapm: Fix handling of loops ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case
-
Mike Snitzer authored
A recent patch to fix the dm cache target's writethrough mode extended the bio's front_pad to include a 1056-byte struct dm_bio_details. Writeback mode doesn't need this, so this patch reduces the per_bio_data_size to 16 bytes in this case instead of 1096. The dm_bio_details structure was added in "dm cache: fix writes to cache device in writethrough mode" which fixed commit e2e74d61 ("dm cache: fix race in writethrough implementation"). In writeback mode we avoid allocating the writethrough-specific members of the per_bio_data structure (the dm_bio_details structure included). Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Darrick J. Wong authored
The dm-cache writethrough strategy introduced by commit e2e74d61 ("dm cache: fix race in writethrough implementation") issues a bio to the origin device, remaps and then issues the bio to the cache device. This more conservative in-series approach was selected to favor correctness over performance (of the previous parallel writethrough). However, this in-series implementation that reuses the same bio to write both the origin and cache device didn't take into account that the block layer's req_bio_endio() modifies a completing bio's bi_sector and bi_size. So the new writethrough strategy needs to preserve these bio fields, and restore them before submission to the cache device, otherwise nothing gets written to the cache (because bi_size is 0). This patch adds a struct dm_bio_details field to struct per_bio_data, and uses dm_bio_record() and dm_bio_restore() to ensure the bio is restored before reissuing to the cache device. Adding such a large structure to the per_bio_data is not ideal but we can improve this later, for now correctness is the important thing. This problem initially went unnoticed because the dm-cache test-suite uses a linear DM device for the dm-cache device's origin device. Writethrough worked as expected because DM submits a *clone* of the original bio, so the original bio which was reused for the cache was never touched. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
