This switches the driver to gpiod API and drops uses of of_get_gpio() API.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently there are no users of auo_pixcir_ts_platdata in the mainline, and
having it (with legacy gpio numbers) prevents us from converting the driver
to gpiod API, so let's drop it.

If, in the future, someone wants to use this driver on non-device tree,
non-ACPI system, they should use static device properties instead of
platform data.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a compatible for the keys found on MT6331 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220914103021.43593-3-angelogioacchino.delregno@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the mtk-pmic-keys to DT schema format.

The old binding was missing documentation for key press/release
interrupts, even though it was supported in hardware and driver,
so support for the same was added during the conversion.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220914103021.43593-2-angelogioacchino.delregno@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Noticed this while trying to debug some unrelated issues: this laptop has
the ability to use rmi4 but doesn't by default. So let's fix that.

Tested locally, including mouse buttons, on my ThinkPad P1 G3. This might
also enable the X1 Extreme G3, but I don't have such a system to test
locally (presumably Mark can chime in if that's the case).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20220909202127.141761-1-lyude@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some devices expose an ultra-low-power (ULP) mode entry mask for
each channel. If the mask is set, the device cannot enter ULP so
long as the corresponding channel remains in an active state.

The vendor has advised setting the mask for any disabled channel.
To accommodate this suggestion, initially set all masks and then
clear them only if specified in the device tree.

Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-8-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a check to prevent sending undefined events, which ultimately
map to SYN_REPORT.

Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-7-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to the datasheets, writing only 0xFF is sufficient to
elicit a communication window. Remove the superfluous 0x00 from
the force communication command.

Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-6-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for PMIC Keys of the MT6331 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220913123941.385349-1-angelogioacchino.delregno@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Delete the redundant word 'to'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220908131043.37099-1-wangjianli@cdjrlc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

An effort has been made to support every official model and firmware
version I could track down info on. The following controllers _should_
have working paddles with this PR:
- Xbox Elite (**untested**)
- Xbox Elite Series 2 on early firmwares (**untested**)
- Xbox Elite Series 2 on v4 firmwares (Tested v4.8.1908.0)
- Xbox Elite Series 2 on v5 pre-BLE firmwares (**untested**)
- Xbox Elite Series 2 on v5 post-BLE firmwares (Tested v5.13.3143.0)

This patch also introduces correct handling for the Elite 1 controller
and properly suppresses paddle inputs when using a custom profile slot.

Starting with firmware v5.11, certain inputs for the Elite 2 were moved
to an extra packet that is not enabled by default.

We must first manually enable this extra packet in order to correctly
process paddle input data with these later firmwares.
Signed-off-by: Christopher Crockett <chaorace@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220818154411.510308-5-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Newer gamepads turn themselves off when the mode button is held down.
For XBOX360W gamepads we must do this in the driver.

Do not use BIT() macro for consistency within the file.
Signed-off-by: Santosh De Massari <s.demassari@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-4-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712163345.445811-6-francesco.dolcini@toradex.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-3-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add RT5120 PMIC power key support.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Clarify properties definition, drop unused pinctrl-2 state 'gpio'.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712101619.326120-3-francesco.dolcini@toradex.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Any IIO ADC can be used with the driver, so do not depend
on VF610_ADC.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20220712101619.326120-2-francesco.dolcini@toradex.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With the new PM macros (DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()), the
compiler has visibility to see that the functions are not used when
!CONFIG_PM and hence, remove the dead code. As such, there's no need
for '__maybe_unused'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-11-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Support feeding VCC through a regulator.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-10-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Optionally reset the device during probe.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-9-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Just some code cleanup regarding coding style. With the introduction of
the bits.h macros changes in the code are indeed introduced.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-8-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There's no need for an extra check for 'client-irq'. Just let it fail when
calling 'request_irq()'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-7-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add device tree bindings for the adp5588-keys driver.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220829131553.690063-6-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use firmware properties (eg: OF) to get the device specific
configuration. This change just replaces the platform data since there
was no platform using it and so, it makes no sense having both.

Special note to the PULL-UP disable setting that is now supported as
part of the gpio subsystem (using 'set_config()' callback).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-5-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Don't continue in code paths after some error is found. It makes no
sense to do any other device configuration if a previous one failed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-4-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With commit 9d2b2e83 ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This change replaces the support for GPIs as key event generators.
Instead of reporting the events directly, we add a gpio based irqchip
so that these events can be consumed by keys defined in the gpio-keys
driver (as it's goal is indeed for keys on GPIOs capable of generating
interrupts). With this, the gpio-adp5588 driver can also be dropped.

The basic idea is that all the pins that are not being used as part of
the keymap matrix can be possibly requested as GPIOs by gpio-keys
(it's also fine to use these pins as plain interrupts though that's not
really the point).

Since the gpiochip now also has irqchip capabilities, we should only
remove it after we free the device interrupt (otherwise we could, in
theory, be handling GPIs interrupts while the gpiochip is concurrently
removed). Thus the call 'adp5588_gpio_add()' is moved and since the
setup phase also needs to come before making the gpios visible, we also
need to move 'adp5588_setup()'.

While at it, always select GPIOLIB so that we don't need to use #ifdef
guards.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-2-nuno.sa@analog.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830183552.50695-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is no such dependency in the driver, but it's implicitly
used to have OF property APIs available. Replace that by device
property API and get rid of OF_GPIO dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830182839.47965-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210156.8143-1-wsa+renesas@sang-engineering.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220816210440.14260-3-macroalpha82@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220809204147.238132-2-eajames@linux.ibm.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.