- 15 Jan, 2006 9 commits
-
-
Patrick McHardy authored
When an inbound PPTP_IN_CALL_REQUEST packet is received the PPTP NAT helper uses a NULL pointer in pointer arithmentic to calculate the offset in the packet which needs to be mangled and corrupts random memory or crashes. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Kirill Korotaev authored
Fixed oops after failed netlink socket creation. Wrong parathenses in if() statement caused err to be 1, instead of negative value. Trivial fix, not trivial to find though. Signed-Off-By: Dmitry Mishin <dim@sw.ru> Signed-Off-By: Kirill Korotaev <dev@openvz.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Nathan Lynch authored
Use first_cpu(cpu_possible_map) for the single-thread workqueue case. We used to hardcode 0, but that broke on systems where !cpu_possible(0) when workqueue_struct->cpu_workqueue_struct was changed from a static array to alloc_percpu. Commit id bce61dd4 ("Fix hardcoded cpu=0 in workqueue for per_cpu_ptr() calls") fixed that for Ben's funky sparc64 system, but it regressed my Power5. Offlining cpu 0 oopses upon the next call to queue_work for a single-thread workqueue, because now we try to manipulate per_cpu_ptr(wq->cpu_wq, 1), which is uninitialized. So we need to establish an unchanging "slot" for single-thread workqueues which will have a valid percpu allocation. Since alloc_percpu keys off of cpu_possible_map, which must not change after initialization, make this slot == first_cpu(cpu_possible_map). Signed-off-by: Nathan Lynch <ntl@pobox.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Samuel Thibault authored
When doublescan mode is in use, scanlines must be doubled. Thanks to Jason Dravet <dravet@hotmail.com> for reporting and testing. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Peter Korsgaard authored
Commit 3e9e7c1d (ppc32: cleanup AMCC PPC40x eval boards to support U-Boot) broke the kernel for ML300 / EP405. It still compiles as there's a weak definition of the function in misc-embedded.c, but the kernel crashes as the bd_t fixup isn't performed. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Luis F. Ortiz authored
I have recently been switching from using 2.4.32 on my trusty old Sparc Blade 100 to using 2.6.15 . Some of the problems I ran into were distorted video when the console was active (missing first character, skipped dots) and when running X windows (colored snow, stripes, missing pixels). A quick examination of the 2.6 versus 2.4 source for the ATY driver revealed alot of changes. A closer look at the code/data for the 64GR/XL chip revealed two minor "typos" that the rewriter(s) of the code made. The first is a incorrect clock value (230 .vs. 235) and the second is a missing flag (M64F_SDRAM_MAGIC_PLL). Making both these changes seems to have fixed my problem. I tend to think the 235 value is the correct one, as there is a 29.4 Mhz clock crystal close to the video chip and 235.2 (29.4*8) is too close to 235 to make it a coincidence. The flag for M64F_SDRAM_MAGIC_PLL was dropped during the changes made by adaplas in file revision 1.72 on the old bitkeeper repository. The change relating to the clock rate has been there forever, at least in the 2.6 tree. I'm not sure where to look for the old 2.5 tree or if anyone cares when it happened. On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the clock crystal frequency is 235.2 Mhz, not 230 Mhz. The chipset also requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL properly for the DRAM. Signed-off-by: Luis F. Ortiz <lfo@Polyad.Org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
-
Stephen Hemminger authored
Please consider this for 2.6.15.1; it fixes several cases where the skge driver can get in a bad state and later crash; if an admin operation that causes a restart fails from out of memory. Such as changing the MTU or increasing the ring size. The fixes involve checking the return value and doing necessary unwinds. Or in some cases avoiding doing a full restart. The same code is the netdev-2.6 tree for 2.6.16 but as separate pieces Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Evgeniy Polyakov authored
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: <stable@kernel.org> akpm: obviously correct, OK for -stable immediately. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Stephen Hemminger authored
There is a regression in 2.6.15. One of the conversions from memcmp to compare_ether_addr is incorrect. We need to do relative comparison to determine min MAC address to use in bridge id. This will cause the wrong bridge id to be chosen which violates 802.1d Spanning Tree Protocol, and may create forwarding loops. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 03 Jan, 2006 2 commits
-
-
Linus Torvalds authored
Hey, it's fifteen years today since I bought the machine that got Linux started. January 2nd is a good date.
-
Andi Kleen authored
Otherwise a bad mem policy system call can confuse the interleaving code into referencing undefined nodes. Originally reported by Doug Chapman I was told it's CVE-2005-3358 (one has to love these security people - they make everything sound important) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Jan, 2006 2 commits
-
-
Dag-Erling Smrgrav authored
In commit 3D59121003721a8fad11ee72e646fd9d3076b5679c, the x86 and x86-64 <asm/param.h> was changed to include <linux/config.h> for the configurable timer frequency. However, asm/param.h is sometimes used in userland (it is included indirectly from <sys/param.h>), so your commit pollutes the userland namespace with tons of CONFIG_FOO macros. This greatly confuses software packages (such as BusyBox) which use CONFIG_FOO macros themselves to control the inclusion of optional features. After a short exchange, Christoph approved this patch Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
Some G5s still occasionally experience shutdowns due to overtemp conditions despite the recent fix. After analyzing logs from such machines, it appears that the overtemp code is a bit too quick at shutting the machine down when reaching the critical temperature (tmax + 8) and doesn't leave the fan enough time to actually cool it down. This happens if the temperature of a CPU suddenly rises too high in a very short period of time, or occasionally on boot (that is the CPUs are already overtemp by the time the driver loads). This patches makes the code a bit more relaxed, leaving a few seconds to the fans to do their job before kicking the machine shutown. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 01 Jan, 2006 2 commits
-
-
Stas Sergeev authored
This should fix multi-threaded core-files Signed-off-by: stsp@aknet.ru Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 31 Dec, 2005 3 commits
-
-
Linus Torvalds authored
-
Yi Yang authored
For the sysctl syscall, if the user wants to get the old value of a sysctl entry and set a new value for it in the same syscall, the old value is always overwritten by the new value if the sysctl entry is of string type and if the user sets its strategy to sysctl_string. This issue lies in the strategy being run twice if the strategy is set to sysctl_string, the general strategy sysctl_string always returns 0 if success. Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1 because they do read and write for the sysctl entry. The strategy routine sysctl_string return 0 although it actually read and write the sysctl entry. According to my analysis, if a strategy routine do read and write, it should return 1, if it just does some necessary check but not read and write, it should return 0, for example sysctl_intvec. Signed-off-by: Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
If the string was too long to fit in the user-supplied buffer, the sysctl layer would zero-terminate it by writing past the end of the buffer. Don't do that. Noticed by Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 Dec, 2005 5 commits
-
-
Linus Torvalds authored
The old /proc interfaces were never updated to use loff_t, and are just generally broken. Now, we should be using the seq_file interface for all of the proc files, but converting the legacy functions is more work than most people care for and has little upside.. But at least we can make the non-LFS rules explicit, rather than just insanely wrapping the offset or something. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Denny Priebe authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Erik Hovland authored
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 29 Dec, 2005 14 commits
-
-
Jean Delvare authored
Thanks to Roman Zippel for the suggestion. Signed-off-by: Jean Delvare <khali@linux-fr.org> [ Short explanation: Kconfig uses ternary math: n/m/y, and !m is m ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This reverts the series of commits 67dbb4ea 281ab031 47807ce3 that changed the GART VM start offset. It fixed some machines, but seems to continually interact badly with some X versions. Quoth Ben Herrenschmidt: "So I think at this point, the best is that we keep the old bogus code that at least is consistent with the bug in the server. I'm working on a big patch to X that reworks the memory map stuff completely and fixes those issues on the server side, I'll do a DRM patch matching this X fix as well so that the memory map is only ever set in one place and with what I hope is a correct algorithm..." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Jean Delvare authored
Fix the cyclic dependency issue between CONFIG_SAA7134_ALSA and CONFIG_SAA7134_OSS (credits to Mauro Carvalho Chehab.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the problems is that htab_initialize_secondary is called when a cpu is being brought up, but it is marked __init. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Currently, we do not pass the correct start_pfn to e820_hole_size, to calculate holes. Following patch fixes that. The bug results in incorrect number of node_present_pages for each pgdat and causes ugly output in /sys and probably VM inbalances. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Sighed-off-by: Shair Fultheim <shai@scalex86.org> Sighed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Riccardo Magliocchetti authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dave Jones authored
__get_unaligned creates a typeof the var its passed, and writes to it, which on gcc4.1, spits out the following error: drivers/char/vc_screen.c: In function 'vcs_write': drivers/char/vc_screen.c:422: error: assignment of read-only variable 'val' Signed-off-by: Dave Jones <davej@redhat.com> [ The "right" fix would be to try to fix <asm-generic/unaligned.h> but that's hard to do with the tools gcc gives us. So this simpler patch is preferable -- Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Fix UML compilation when SKAS mode is disabled. Indeed, we were compiling SKAS-only object files, which failed due to some SKAS-only headers being excluded from the search path. Thanks to the bug report from Pekka J Enberg. Acked-by: Pekka J Enberg <penberg (at) cs ! helsinki ! fi> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Today, when compiling UML, I got warnings for two used unexported symbols: readdir64 and truncate64. Indeed, my glibc headers are aliasing readdir to readdir64 and truncate to truncate64 (and so on). I'm then adding additional exports. Since I've no idea if the symbols where always provided in the supported glibc's, I've added weak definitions too. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Prevent page->index << PAGE_CACHE_SHIFT from overflowing. There is a casting there, but was added without care, so it's at the wrong place. Note the extra parens around the shift - "+" is higher precedence than "<<", leading to a GCC warning which saved all us. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Trivial removal of unused variable from this file - doesn't even change the generated assembly code, in fact (gcc should trigger a warning for unused value here). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Don't use printk() where "current_thread_info()" is crap. Until when we switch to running on init_stack, current_thread_info() evaluates to crap. Printk uses "current" at times (in detail, ¤t is evaluated with CONFIG_DEBUG_SPINLOCK to check the spinlock owner task). And this leads to random segmentation faults. Exactly, what happens is that ¤t = *(current_thread_info()), i.e. round down $esp and dereference the value. I.e. access the stack below $esp, which causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 28 Dec, 2005 3 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Noticed by Christophe Zimmerman, this explains the slow mouse movement with 2.6.x kernels. And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we always used a 5-byte protocol with Sun mice in the past. I have no idea how the 3-byte thing got into the 2.6.x driver, but it's surely wrong. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-