This adds the APM X-Gene SoC RNG support.
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Clearly this was meant to be an include guard, but the #define was
missing.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a simple test vector for the lz4 and lz4hc compression
algorithms.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The lz4 library has two functions for decompression, with slightly
different signatures and behaviour. The lz4_decompress_crypto() function
seemed to be using the one that assumes that the decompressed length is
known in advance.

This patch switches to the other decompression function and makes sure
that the length of the decompressed output is properly returned to the
caller.

The same issue was present in the lz4hc algorithm.

Coincidentally, this change also makes very basic lz4 and lz4hc
compression tests in testmgr pass.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: qat-linux@intel.com
Cc: linux-crypto@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The maximum values for additional input string or generated blocks is
larger than 1<<32. To ensure a sensible value on 32 bit systems, return
SIZE_MAX on 32 bit systems. This value is lower than the maximum
allowed values defined in SP800-90A. The standard allow lower maximum
values, but not larger values.

SIZE_MAX - 1 is used for drbg_max_addtl to allow
drbg_healthcheck_sanity to check the enforcement of the variable
without wrapping.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sparse tool complained that the cpu_to_be[32|64] functions return
__be[32|64] instead of __u32 or __u64. The patch replaces the __u32 and
__u64 with __be32 and __be64.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CC: Tim Chen <tim.c.chen@linux.intel.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CC: Tim Chen <tim.c.chen@linux.intel.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

During creation of the DRBG shadow state, it is ensured that the DRBG
state structure is already allocated. Thus, a sanity check for verifying
that the structure is allocated is removed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SP800-90A mandates several hard-coded values. The old drbg_cores allows
the setting of these values per DRBG implementation. However, due to the
hard requirement of SP800-90A, these values are now returned globally
for each DRBG.

The ability to set such values per DRBG is therefore removed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The drbg_make_shadow function contains sanity checks which are not
needed as the function is invoked at times where it is ensured that the
checked-for variables are available.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When allocating V, C, the zeroization is only needed when
allocating a new instance of the DRBG, i.e. when performing an
initial seeding. For all other allocations, the memcpy implemented in
drbg_copy_drbg ensures that the memory is filled with the correct
information.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove memset(0) which is not needed due to the kzalloc of the memory.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto_init and crypto_fini functions are always implemented. Thus,
there is no need for a protecting check.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The kzfree function already performs the NULL pointer check. Therefore,
the DRBG code does not need to implement such check.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The DRBG requires the conversion of an integer into a string
representation of that integer. The previous implementation converted
the given integer byte-wise. However, the kernel offers the cpu_to_be
function which already re-arranges the memory representation of an
integer such that it applies when interpreting the same memory as
character string.

The change therefore uses an integer-cast / union of the target
character array together with the cpu_to_be function to convert an
integer into its string representation.

Tests show that the Hash and CTR DRBG implementations (the HMAC DRBG
does not require such conversion) is about 10% faster (or requires less
computing power, respectively).
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

buf_0 and buf_1 in caam_hash_state are not next to each other.
Accessing buf_1 is incorrect from &buf_0 with an offset of only
size_of(buf_0). The same issue is also with buflen_0 and buflen_1

Cc: <stable@vger.kernel.org> # 3.13+
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace equivalent (and partially incorrect) scatter-gather functions
with ones from crypto-API.

The replacement is motivated by page-faults in sg_copy_part triggered
by successive calls to crypto_hash_update. The following fault appears
after calling crypto_ahash_update twice, first with 13 and then
with 285 bytes:

Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xf9bf9a8c
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 CoreNet Generic
Modules linked in: tcrypt(+) caamhash caam_jr caam tls
CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted
3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75
task: e9308530 ti: e700e000 task.ti: e700e000
NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0
REGS: e700fb80 TRAP: 0300   Not tainted
(3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2)
MSR: 00029002 <CE,EE,ME>  CR: 44f92024  XER: 20000000
DEAR: 00000008, ESR: 00000000

GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888
GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154
GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48
GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000
NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash]
LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash]
Call Trace:
[e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable)
[e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash]
[e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls]
[e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls]
[e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70
[e700fe40] [c02259f0] alg_test_aead+0x50/0xc0
[e700fe60] [c02241e4] alg_test+0x114/0x2e0
[e700fee0] [c022276c] cryptomgr_test+0x4c/0x60
[e700fef0] [c004f658] kthread+0x98/0xa0
[e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case of error, the function device_create() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sampling of the oscillator can be done in multiple modes for
generating the entropy value. By default, this is set to von
Neumann. This patch changes the sampling to raw data, since it
has been discovered that the generated entropy has a better
'quality'.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The entropy delay (the length in system clocks of each
entropy sample) for the RNG4 block of CAAM is dependent
on the frequency of the SoC. By elaborate methods, it
has been determined that a good starting value for all
platforms integrating the CAAM IP is 3200. Using a
higher value has additional benefit of  speeding up
the process of instantiating the RNG, since the entropy
delay will be increased and instantiation of the RNG
state handles will be reattempted by the driver. If the
starting value is low, for certain platforms, this can
lead to a quite lengthy process.
This patch changes the starting value of the length of
the entropy sample to 3200 system clocks.
In addition to this change, the attempted entropy delay
values are now printed on the console upon initialization
of the RNG block.
While here, a safeguard for yielding the processor was
added for ensuring that in very adverse cases,
the CPU isn't hogged by the instantiation loop.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The rtfrqmax & rtfrqmin set the bounds of the expected frequency of the
oscillator, when SEC runs at its maximum frequency. For certain platforms
(f.i. T2080), the oscillator is very fast and thus if the SEC runs at
a lower than normal frequency, the ring oscillator is incorrectly detected
as being out of bounds.

This patch effectively disables the maximum frequency check, by setting a
high enough maximum allowable frequency for the oscillator. The reasoning
behind this is that usually a broken oscillator will run too slow
(i.e. not run at all) rather than run too fast.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The argument "req" of do_one_async_hash_op is not used by the
function. This patch removes this argument and renames the
function to match more closely its purpose.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the multi-buffer job manager which is responsible
for submitting scatter-gather buffers from several SHA1 jobs to the
multi-buffer algorithm.  It also contains the flush routine to that's
called by the crypto daemon to complete the job when no new jobs arrive
before the deadline of maximum latency of a SHA1 crypto job.

The SHA1 multi-buffer crypto algorithm is defined and initialized in
this patch.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the assembly routines to do SHA1 computation on
buffers belonging to serveral jobs at once.  The assembly routines are
optimized with AVX2 instructions that have 8 data lanes and using AVX2
registers.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the routines used to submit and flush buffers
belonging to SHA1 crypto jobs to the SHA1 multibuffer algorithm.  It is
implemented mostly in assembly optimized with AVX2 instructions.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the data structures and prototypes of functions
needed for computing SHA1 hash using multi-buffer.  Included are the
structures of the multi-buffer SHA1 job, job scheduler in C and x86
assembly.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the multi-buffer crypto daemon which is responsible
for submitting crypto jobs in a work queue to the responsible multi-buffer
crypto algorithm.  The idea of the multi-buffer algorihtm is to put
data streams from multiple jobs in a wide (AVX2) register and then
take advantage of SIMD instructions to do crypto computation on several
buffers simultaneously.

The multi-buffer crypto daemon is also responsbile for flushing the
remaining buffers to complete the computation if no new buffers arrive
for a while.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This function will help an async task processing batched jobs from
workqueue decide if it wants to keep processing on more chunks of batched
work that can be delayed, or to accumulate more work for more efficient
batched processing later.

If no other tasks are running on the cpu, the batching process can take
advantgae of the available cpu cycles to a make decision to continue
processing the existing accumulated work to minimize delay,
otherwise it will yield.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Prepare IV array only if the dependent code is executed.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch inverts two if conditions to remove code blocks
indentation. Several white space clean-ups follow.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch inverts one if condition to remove code block indentation.
Several white space clean-ups follow.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch inverts two if conditions and allows removal of one
tab-stop in their code-blocks. Only white-space clean-up follows.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For the special case when we have a null input string, we want
to initialize the entry len to 0 for the hash/ahash walk, so
cyrpto_hash_walk_last will return the correct result indicating
that we have completed the scatter list walk.  Otherwise we may
keep walking the sg list and access bogus memory address.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull x86 platform driver updates from Matthew Garrett:
 "A moderate number of changes, but nothing awfully significant.

  A lot of const cleanups, some reworking and additions to the rfkill
  quirks in the asus driver, a new driver for generating falling laptop
  events on Toshibas and some misc fixes.

  Maybe vendors have stopped inventing things"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits)
  platform/x86: Enable build support for toshiba_haps
  Documentation: Add file about toshiba_haps module
  platform/x86: Toshiba HDD Active Protection Sensor
  asus-nb-wmi: Add wapf4 quirk for the U32U
  alienware-wmi: make hdmi_mux enabled on case-by-case basis
  ideapad-laptop: Constify DMI table and other r/o variables
  asus-nb-wmi.c: Rename x401u quirk to wapf4
  compal-laptop: correct invalid hwmon name
  toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
  toshiba_acpi: Add extra check to backlight code
  Fix log message about future removal of interface
  ideapad-laptop: Disable touchpad interface on Yoga models
  asus-nb-wmi: Add wapf4 quirk for the X550CC
  intel_ips: Make ips_mcp_limits variables static
  thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
  fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
  hp-wmi: Add missing __init annotations to initialization code
  hp_accel: Constify ACPI and DMI tables
  fujitsu-tablet: Mark DMI callbacks as __init code
  dell-laptop: Mark dell_quirks[] DMI table as __initconst
  ...

Pull idle update from Len Brown:
 "Two Intel-platform-specific updates to intel_idle, and a cosmetic
  tweak to the turbostat utility"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: tweak whitespace in output format
  intel_idle: Broadwell support
  intel_idle: Disable Baytrail Core and Module C6 auto-demotion

Pull module fix from Rusty Russell:
 "Nasty potential bug if someone uses a known module param with an
  invalid value (we don't fail unknown module params any more, just
  warn)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Clean up ro/nx after early module load failures

Pull virtio-rng update from Amit Shah:
 "Add derating factor for use by hwrng core

  Sending directly to you with the commit log changes Ted Ts'o pointed
  out.  Not sure if Rusty's back after his travel, but this already has
  his s-o-b"

* 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio:
  virtio: rng: add derating factor for use by hwrng core