- 06 Sep, 2019 4 commits
-
-
Adam Ford authored
When the pinmux configuration was added, it was accidentally placed into the omap3_pmx_wkup node when it should have been placed into the omap3_pmx_core. This error was accidentally propagated to stable by me when I blindly requested the pull after seeing I2C issues without actually reviewing the content of the pinout. Since the bootloader previously muxed these correctly in the past, was a hidden error. This patch moves the i2c2_pins and i2c3_pins to the correct node which should eliminate i2c bus errors and timeouts due to the fact the bootloader uses the save device tree that no longer properly assigns these pins. Fixes: 5fe3c0fa ("ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV") #4.9+ Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
A previous commit removed the panel-dpi driver, which made the video on the AM3517-evm stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the am3517-evm to use a similar panel and remove the manual timing requirements. Fixes: 8bf4b162 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
A previous commit removed the panel-dpi driver, which made the Torpedo video stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the Torpedo dev kits to use a similar panel and remove the manual timing requirements. Fixes: 8bf4b162 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable CONFIG_DRM_PANEL_SIMPLE. This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same way the deprecated panel-dpi was. Fixes: 8bf4b162 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 05 Sep, 2019 2 commits
-
-
Tony Lindgren authored
We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect target module driver as reported by Keerthy. Device clocks and the interconnect target module may or may not be enabled by the bootloader on init, but we currently assume the clocks and module are on from the bootloader for "ti,no-idle" and "ti,no-idle-on-init" quirks as reported by Grygorii Strashko. Let's fix the issue by always enabling clocks init, and never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init" quirk, we must decrement the usage count later on to allow PM runtime to idle the module if requested. Fixes: 1a5cd7c2 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Cc: Keerthy <j-keerthy@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Reported-by: Keerthy <j-keerthy@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 13 Aug, 2019 11 commits
-
-
YueHaibing authored
Fix sparse warnings: drivers/soc/ti/pm33xx.c:144:27: warning: symbol 'rtc_wake_src' was not declared. Should it be static? drivers/soc/ti/pm33xx.c:160:5: warning: symbol 'am33xx_rtc_only_idle' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Keerthy authored
The patch fixes a bunch of static checker warnings. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
-
Tony Lindgren authored
Commit 4e27f752 ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") dropped legacy mmc platform data for am3 and am4, but missed the fact that we never updated the dts files for mmc3 that is directly on l3 interconnect instead of l4 interconnect. This leads to a situation with no legacy platform data and incomplete dts data. Let's update the mmc instances on l3 interconnect to probe properly with ti-sysc interconnect target module driver to make mmc3 work again. Let's still keep legacy "ti,hwmods" property around for v5.2 kernel and only drop it later on. Note that there is no need to use property status = "disabled" for mmc3. The default for dts is enabled, and runtime PM will idle unused instances just fine. Fixes: 4e27f752 ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") Reported-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
-
Suman Anna authored
The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly. While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Janusz Krzysztofik authored
Non-serio path of Amstrad Delta FIQ deferred handler depended on irq_ack() method provided by OMAP GPIO driver. That method has been removed by commit 693de831 ("gpio: omap: remove irq_ack method"). Remove useless code from the deferred handler and reimplement the missing operation inside the base FIQ handler. Should another dependency - irq_unmask() - be ever removed from the OMAP GPIO driver, WARN once if missing. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Faiz Abbas authored
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values can be configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdfSigned-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Emmanuel Vadot authored
As seen on the AM335x TRM all the UARTs controller only are 0x1000 in size. Fix this in the DTS. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
We have errata i688 workaround produce warnings on SoCs other than omap4 and omap5: omap4_sram_init:Unable to allocate sram needed to handle errata I688 omap4_sram_init:Unable to get sram pool needed to handle errata I688 This is happening because there is no ti,omap4-mpu node, or no SRAM to configure for the other SoCs, so let's remove the warning based on the SoC revision checks. As nobody has complained it seems that the other SoC variants do not need this workaround. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 24 Jul, 2019 5 commits
-
-
Tony Lindgren authored
We are currently using a wrong register for dcan revision. Although this is currently only used for detecting the dcan module, let's fix it to avoid confusion. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
For some devices we can get the following warning on boot: ti-sysc 48485200.target-module: sysc_disable_module: invalid midlemode Fix this by treating SYSC_IDLE_FORCE like we do for the other bits for idlemodes mask. Fixes: d59b6056 ("bus: ti-sysc: Add generic enable/disable functions") Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when reset is completed. Let's configure it as otherwise we get warnings on boot when we check the data against dts provided data. Eventually the legacy platform data will be just dropped, but let's fix the warning first. Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 21 Jul, 2019 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Rob Herring authored
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
- 20 Jul, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
-