- 28 Jul, 2020 6 commits
-
-
Krzysztof Kozlowski authored
Enabling the JZ4780_NEMC driver makes sense only for specific hardware - the Ingenic SoC architecture. It is not an essential driver for the SoC support so do not enable it by default. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Krzysztof Kozlowski authored
The CONFIG_JZ4780_NEMC was previously a default on MIPS but now it has to be enabled manually. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Acked-by:
-
Paul Cercueil authored
The ROUT (right channel output of audio codec) was connected to INL (left channel of audio amplifier) instead of INR (right channel of audio amplifier). Fixes: 8ddebad1 ("MIPS: qi_lb60: Migrate to devicetree") Cc: stable@vger.kernel.org # v5.3 Signed-off-by:
-
Paul Cercueil authored
The CONFIG_MIPS_MACHINE option is dead code that hasn't been used in years. The Kconfig option is not selected anywhere, and the <asm/mips_machine.h> is not included anywhere either. To make things worse, for years it co-existed with a separate MIPS machine implementation as <asm/machine.h>. The two defined the 'mips_machine' structure with different fields, and the 'MIPS_MACHINE' macro with different parameters. The two used the same memory area (defined by the linker script) to store data, and you could totally use the two at the same time for all kinds of funny results. Signed-off-by:
-
Paul Cercueil authored
Since commit 3a77e0d7 ("MIPS: ath79: drop machfiles"), this header is not used anymore. Signed-off-by:
-
Thomas Bogendoerfer authored
Clean up cpu-feature-overrides, which only repeat the default. Signed-off-by:
-
- 26 Jul, 2020 9 commits
-
-
Jinyang He authored
Use 0 as the align parameter in memblock_find_in_range() is incorrect when we reserve memory for Crash kernel. The environment as follows: [ 0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e ... [ 1.951016] crashkernel=64M@128M The warning as follows: [ 0.000000] Invalid memory region reserved for crash kernel And the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 1a000000-1bffffff : pci@1a000000 ... The align parameter may be finally used by round_down() or round_up(). Like the following call tree: mips-next: mm/memblock.c memblock_find_in_range └── memblock_find_in_range_node ├── __memblock_find_range_bottom_up │ └── round_up └── __memblock_find_range_top_down └── round_down \#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) \#define round_down(x, y) ((x) & ~__round_mask(x, y)) \#define __round_mask(x, y) ((__typeof__(x))((y)-1)) The round_down(or round_up)'s second parameter must be a power of 2. If the second parameter is 0, it both will return 0. Use 1 as the parameter to fix the bug and the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 08000000-0bffffff : Crash kernel 1a000000-1bffffff : pci@1a000000 ... Signed-off-by:Jinyang He <hejinyang@loongson.cn> Reviewed-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
-
Huacai Chen authored
Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools. Cc: stable@vger.kernel.org Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Paul Cercueil authored
Add a devicetree node for the Image Processing Unit (IPU) found in the JZ4725B. Connect it with graph nodes to the LCD node. The LCD driver will expect the IPU node to be accessed through graph port #8, as stated in the bindings documentation. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "as". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Delete the repeated words "Returns" and convert to kernel-doc notation by adding a ':'. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "command". Delete the repeated words "returns" and convert to kernel-doc notation by adding a ':'. Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "the". Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "Returns". Signed-off-by:
-
Randy Dunlap authored
Delete the repeated word "on". Signed-off-by:
-
- 24 Jul, 2020 5 commits
-
-
Jiri Slaby authored
It references __initdata and is called only from an __init function: trap_init. This avoids section mismatches (which I am seeing with gcc 10). Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Álvaro Fernández Rojas authored
There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE version is stored as is (string vs number bytes). Some newer devices have an additional version number, such as the Comtrend VR-3032u: "1.0.38-112.118-11". Finally, print the string as is if the version doesn't start with "cfe-v" or "cfe-vd", but starts with "cfe-". Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.Add "PRID_COMP_INGENIC_13" and "PRID_IMP_XBURST2" for X2000. 2.Add X2000 system type for cat /proc/cpuinfo to give out X2000. Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
Yu Kuai authored
if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 93e502b3 ("MIPS: OCTEON: Platform support for OCTEON III USB controller") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
-
Jiaxun Yang authored
paravirt machine was introduced for Cavium's partial virtualization technology, however, it's host side support and QEMU support never landed in upstream. As Cavium was acquired by Marvel and they have no intention to maintain their MIPS product line, also paravirt is unlikely to be utilized by community users, it's time to retire it if nobody steps in to maintain it. Signed-off-by:
-
- 21 Jul, 2020 6 commits
-
-
Serge Semin authored
Add Thomas and myself as maintainers of the MIPS CPU and GIC IRQchip, MIPS GIC timer and MIPS CPS CPUidle drivers. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Serge Semin authored
CDMM may be available not only on MIPS R2 architectures, but also on newer MIPS R5 chips. For instance our P5600 chip has one. Let's mark the CDMM bus being supported for that MIPS arch too. Signed-off-by:
-
Serge Semin authored
Since having and mapping the CDMM block is platform specific, then instead of just returning a zero-address, lets make the default CDMM base address search method (mips_cdmm_phys_base()) to do something useful. For instance to find the address in a dedicated dtb-node in order to support of-based platforms by default. Signed-off-by:
-
Serge Semin authored
It's a Common Device Memory Map controller embedded into the MIPS IP cores, which dts node is supposed to have compatible and reg properties. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Serge Semin authored
Modern device tree bindings are supposed to be created as YAML-files in accordance with DT schema. This commit replaces MIPS GIC legacy bare text binding with YAML file. As before the binding file states that the corresponding dts node is supposed to be compatible with MIPS Global Interrupt Controller indicated by the "mti,gic" compatible string and to provide a mandatory interrupt-controller and '#interrupt-cells' properties. There might be optional registers memory range, "mti,reserved-cpu-vectors" and "mti,reserved-ipi-vectors" properties specified. MIPS GIC also includes a free-running global timer, per-CPU count/compare timers, and a watchdog. Since currently the GIC Timer is only supported the DT schema expects an IRQ and clock-phandler charged timer sub-node with "mti,mips-gic-timer" compatible string. Signed-off-by:
-
Serge Semin authored
It's a Cluster Power Controller embedded into the MIPS IP cores. Currently the corresponding dts node is supposed to have compatible and reg properties. Signed-off-by:
-
- 16 Jul, 2020 14 commits
-
-
Tiezhu Yang authored
In the MIPS architecture, we should clear the security-relevant flag READ_IMPLIES_EXEC in the function SET_PERSONALITY2() of the file arch/mips/include/asm/elf.h. Otherwise, with this flag set, PROT_READ implies PROT_EXEC for mmap to make memory executable that is not safe, because this condition allows an attacker to simply jump to and execute bytes that are considered to be just data [1]. In mm/mmap.c: unsigned long do_mmap(struct file *file, unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, vm_flags_t vm_flags, unsigned long pgoff, unsigned long *populate, struct list_head *uf) { [...] if ((prot & PROT_READ) && (current->personality & READ_IMPLIES_EXEC)) if (!(file && path_noexec(&file->f_path))) prot |= PROT_EXEC; [...] } By the way, x86 and ARM64 have done the similar thing. After commit 250c2277 ("x86_64: move kernel"), in the file arch/x86/kernel/process_64.c: void set_personality_64bit(void) { [...] current->personality &= ~READ_IMPLIES_EXEC; } After commit 48f99c8e ("arm64: Preventing READ_IMPLIES_EXEC propagation"), in the file arch/arm64/include/asm/elf.h: #define SET_PERSONALITY(ex) \ ({ \ clear_thread_flag(TIF_32BIT); \ current->personality &= ~READ_IMPLIES_EXEC; \ }) [1] https://insights.sei.cmu.edu/cert/2014/02/feeling-insecure-blame-your-parent.htmlReported-by:Juxin Gao <gaojuxin@loongson.cn> Co-developed-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Peng Fan authored
Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by:
Peng Fan <fanpeng@loongson.cn> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Refresh CU1000-Neo's defconfig to support LED. Tested-by:
周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.The CU1000-Neo board actually uses X1000E instead of X1000, so the wrongly written "ingenic,x1000" in compatible should be changed to "ingenic,x1000e". 2.Adjust the order of nodes according to the corresponding address value. 3.Drop unnecessary node in "wlan_pwrseq". 4.Add the leds node to "cu1000-neo.dts". Tested-by:
-
周琰杰 (Zhou Yanjie) authored
Add a device tree and a defconfig for the Ingenic X1830 based YSH & ATIL CU Neo board. Tested-by:
-
周琰杰 (Zhou Yanjie) authored
1.Add bindings for Ingenic X1830 based board, prepare for later dts. 2.The CU1000-Neo board actually uses X1000E instead of X1000, so the wrongly written "ingenic,x1000" in bindings should be changed to "ingenic,x1000e", the corresponding dts file modification will be made in a patch later in this series. Tested-by:
-
周琰杰 (Zhou Yanjie) authored
Support the Ingenic X1830 SoC using the code under arch/mips/jz4740. This is left unselectable in Kconfig until a X1830 based board is added in a later commit. Tested-by:
-
Sunguoyun authored
sparse report build warning as follows: arch/mips/vdso/vdso-n32-image.c:13:35: incorrect type in assignment (different address spaces) @@ expected void *[usertype] vdso @@ got void [noderef] <asn:1> * @@ Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sunguoyun <sunguoyun@loongson.cn> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Jiaxun Yang authored
Load correct devicetree according to PRID and PCH type. Signed-off-by:
-
Jiaxun Yang authored
Add DeviceTree files for Classic Loongson64 Quad Core + LS7A boards and Generic Loongson64 Quad Core + LS7A boards. Signed-off-by:
-
Huacai Chen authored
From previous commits, the machine names with "loongson3-" prefix have renamed to "loongson64c-" prefix in documents, but the .dts files have not been updated as well. So fix it. Signed-off-by:
-
Zhi Li authored
Replace hwmon_device_register() with hwmon_device_register_with_info() to fix the following boot warning : [ 9.029924] Loongson Hwmon Enter... [ 9.106850] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). Signed-off-by:
Zhi Li <lizhi01@loongson.cn> Signed-off-by:
-
Tiezhu Yang authored
Once the temperature of any CPUs is too high, it can power off immediately, no need to check the rest of CPUs, and it is better to print a log before power off, this is useful when analysis the abnormal issues. Signed-off-by:
-
