- 04 Mar, 2022 4 commits
-
-
Linus Walleij authored
The Fujitsu M5MOLS sensor driver is using a reset GPIO number passed from platform data. No machine/board descriptor file in the kernel is using this so let's replace it with a GPIO descriptor. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com>
-
Linus Walleij authored
The noon010pc30 sensor driver is using legacy gpio numbers passed through platform data and open coding reverse polarity on the GPIOs used for reset and standby. Nothing in the kernel defines any platform data for this driver so we can just convert the driver to use GPIO descriptors and requires that these specify the correct polarity instead. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Linus Walleij authored
This driver includes <linux/gpio.h> but does not use any symbols from this file. Drop the include. Signed-off-by:
-
Linus Walleij authored
The adv7511 driver includes the legacy GPIO header <linux/gpio.h> yet fails to use any symbols from it. Drop the include. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
- 03 Mar, 2022 11 commits
-
-
Marek Vasut authored
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder. This chip supports 1/2/4 analog video inputs and converts them into 1/2/4 VCs in MIPI CSI2 stream. This driver currently supports ISL79987 and both 720x480 and 720x576 resolutions, however as per specification, all inputs must use the same resolution and standard. The only supported pixel format is now YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but this is currently unsupported. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> To: linux-media@vger.kernel.org Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon] Signed-off-by:
-
Marek Vasut authored
Add bindings for the Intersil ISL79987 analog to MIPI CSI-2 decoder. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Laurent Pinchart authored
Being able to call cleanup functions on objects that haven't been initialized but whose memory has been zeroed simplifies error handling. The media_entity_cleanup() function documentation doesn't tell whether this is allowed or not, and inspection of its implementation doesn't provide any clue as the function is currently empty. Update the documentation to explicitly allow this usage pattern. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Linus Walleij authored
The driver already includes <linux/gpio/consumer.h> which is what it uses, drop the legacy <linux/gpio.h> and <linux/of_gpio.h> includes. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Linus Walleij authored
The driver already includes <linux/gpio/consumer.h> which is what it uses, drop the legacy <linux/gpio.h> include. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
v4l2_fwnode_parse_reference() relied on counting the number of references for async array memory allocation. The array is long gone so remove counting the references now. This also changes how the function arrives in different unsuccessful return values but the functionality remains unchanged. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Sakari Ailus authored
The check of -ENODATA return value from fwnode_property_get_reference_args() was made redundant by commit c343bc2c ("ACPI: properties: Align return codes of __acpi_node_get_property_reference()"). -ENOENT remains to be used to signal there are no further entries. Remove the check for -ENODATA. Signed-off-by:
-
Laurent Pinchart authored
The media_pipeline_start() function has two purposes: it constructs a pipeline by recording the entities that are part of it, gathered from a graph walk, and validate the media links. The pipeline pointer is stored in the media_entity structure as part of this process, and the entity's stream count is increased, to record that the entity is streaming. When multiple video nodes are present in a pipeline, media_pipeline_start() is typically called on all of them, with the same pipeline pointer. This is taken into account in media_pipeline_start() by skipping validation for entities that are already part of the pipeline, while returning an error if an entity is part of a different pipeline. It turns out that this process is overly complicated. When media_pipeline_start() is called for the first time, it constructs the full pipeline, adding all entities and validating all the links. Subsequent calls to media_pipeline_start() are then nearly no-ops, they only increase the stream count on the pipeline and on all entities. The media_entity stream_count field is used for two purposes: checking if the entity is streaming, and detecting when a call to media_pipeline_stop() balances needs to reset the entity pipe pointer to NULL. The former can easily be replaced by a check of the pipe pointer. Simplify media_pipeline_start() by avoiding the pipeline walk on all calls but the first one, and drop the media_entity stream_count field. media_pipeline_stop() is updated accordingly. Signed-off-by:
-
Laurent Pinchart authored
Add a function to test if a pad is part of a pipeline currently streaming, and use it through drivers to replace direct access to the stream_count field. This will help reworking pipeline start/stop without disturbing drivers. Signed-off-by:
-
Shawn Tu authored
Add a V4L2 sub-device driver for Omnivision og01a1b b&w image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 1280x1024 at 120FPS Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> [Sakari Ailus: Update according to recent v4l2-async API changes] Signed-off-by:
-
Hans de Goede authored
ov5648_state_init() calls ov5648_state_mipi_configure() which uses __v4l2_ctrl_s_ctrl[_int64](). This means that sensor->mutex (which is also sensor->ctrls.handler.lock) must be locked before calling ov5648_state_init(). ov5648_state_mipi_configure() is also used in other places where the lock is already held so it cannot be changed itself. Note this is based on an identical (tested) fix for the ov8865 driver, this has only been compile-tested. Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 23 Feb, 2022 1 commit
-
-
Mirela Rabulea authored
In ov5640_set_fmt, pending_fmt_change will always be false, because the sensor format is saved before comparing it with the previous format: fmt = &sensor->fmt;... *fmt = *mbus_fmt;... if (mbus_fmt->code != sensor->fmt.code) sensor->pending_fmt_change = true; This causes the sensor to capture with the previous pixelcode. Also, changes might happen even for V4L2_SUBDEV_FORMAT_TRY, so fix that. Basically, revert back to the state before commit 07115449 ("media: ov5640: Fix set format regression") as it was more clear, and then update format even when pixelcode does not change, as resolution might change. Fixes: 07115449 ("media: ov5640: Fix set format regression") Fixes: 6949d864 ("media: ov5640: do not change mode if format or frame interval is unchanged") Fixes: fb98e29f ("media: ov5640: fix mode change regression") Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by:
Hugues Fruchet <hugues.fruchet@st.com> Tested-by:
-
- 17 Feb, 2022 19 commits
-
-
Laurent Pinchart authored
Replace the driver-specific definitions of MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Laurent Pinchart authored
Replace the hardcoded MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Laurent Pinchart authored
Replace the hardcoded MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
-
Laurent Pinchart authored
There are many CSI-2-related drivers in the media subsystem that come with their own macros to handle the CSI-2 data types (or just hardcode the numerical values). Provide a shared header with definitions for those data types that driver can use. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Nikita Yushchenko authored
VSP hardware could be used (e.g. by the bootloader) before driver load, and some interrupts could be left in enabled and pending state. In this case, setting up VSP interrupt handler without masking interrupts before causes interrupt handler to be immediately called (and crash due to null vsp->info dereference). Fix that by explicitly masking all interrupts before setting the interrupt handler. To do so, have to set the interrupt handler later, after hw revision is already detected and number of interrupts to mask gets known. Based on patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com> included in the Renesas BSP kernel. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by:
-
Paul Pawlowski authored
Adds the requisite device id to support detection of the Apple FaceTime HD webcam exposed over the T2 BCE VHCI interface. Tested-by:
Aun-Ali Zaidi <admin@kodeit.net> Signed-off-by:
Paul Pawlowski <paul@mrarm.io> Signed-off-by:
Aditya Garg <gargaditya08@live.com> Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by:
-
Alexander Stein authored
Without this the default (SMPTE 170M) from init_cfg stays unchanged. Even after configuring 'srgb' colorspace (or 'raw') $ media-ctl -V "'csis-32e30000.mipi-csi':0 [colorspace:srgb]" the colorspace does not change at all: $ media-ctl --get-v4l2 "'csis-32e30000.mipi-csi':0" [fmt:SRGGB10_1X10/1920x1080 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Zhou Qingyang authored
In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to ctx->active_fmt and there is a dereference of it after that, which could lead to NULL pointer dereference on failure of devm_kzalloc(). Fix this bug by adding a NULL check of ctx->active_fmt. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code. Fixes: 71681550 ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers") Signed-off-by:
Zhou Qingyang <zhou1615@umn.edu> Reviewed-by:
Pratyush Yadav <p.yadav@ti.com> Signed-off-by:
-
Dan Carpenter authored
This error path needs to drop the mutex to avoid a deadlock. Fixes: 7be91e02 ("media: i2c: Add ov08d10 camera sensor driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bingbu Cao authored
MWB gain register are used to set gain for each mwb channel mannually. However, it will involve some artifacts at low light environment as gain cannot be applied to each channel synchronously. Update the driver to use group write for digital gain to make the sure RGB digital gain be applied together at frame boundary. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Martin Kepplinger authored
link-frequencies is required but only mentioned in the example. Add it to the description. Fixes: f3ce7200 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor") Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
-
Martin Kepplinger authored
This fixes "make dt_binding_check": Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.yaml: camera@20: port:endpoint: Unevaluated properties are not allowed ('link-frequencies', 'data-lanes' were unexpected) From schema: Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml [Sakari Ailus: Reword commit message] Fixes: f3ce7200 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor") Reported-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Wrap the target region in struct_group(). This additionally fixes a theoretical misalignment of the copy (since the size of "buf" changes between 64-bit and 32-bit, but this is likely never built for 64-bit). FWIW, I think this code is totally broken on 64-bit (which appears to not be a "real" build configuration): it would either always fail (with an uninitialized data->buf_size) or would cause corruption in userspace due to the copy_to_user() in the call path against an uninitialized data->buf value: omap3isp_stat_request_statistics_time32(...) struct omap3isp_stat_data data64; ... omap3isp_stat_request_statistics(stat, &data64); int omap3isp_stat_request_statistics(struct ispstat *stat, struct omap3isp_stat_data *data) ... buf = isp_stat_buf_get(stat, data); static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat, struct omap3isp_stat_data *data) ... if (buf->buf_size > data->buf_size) { ... return ERR_PTR(-EINVAL); } ... rval = copy_to_user(data->buf, buf->virt_addr, buf->buf_size); Regardless, additionally initialize data64 to be zero-filled to avoid undefined behavior. Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor Cc: Arnd Bergmann <arnd@arndb.de> Fixes: 378e3f81 ("media: omap3isp: support 64-bit version of omap3isp_stat_data") Cc: stable@vger.kernel.org Reviewed-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Laurent Pinchart authored
MIPI CSI-2 continuous and non-continuous clock modes are mutually exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only. Signed-off-by:
-
Laurent Pinchart authored
The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never read. Drop those flags. Virtual channel information should be conveyed through frame descriptors instead. Signed-off-by:
-
Laurent Pinchart authored
The V4L2_MBUS_CSI2_*_LANE flags are a legacy API and are unused. Drop them. Signed-off-by:
-
Laurent Pinchart authored
The media bus configuration is specified through a set of flags, some of which being mutually exclusive. This doesn't scale to express more complex configurations. Improve the API by replacing the single flags field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures. The flags themselves are still used in those structures, so they are kept here. Drivers are however updated to use structure fields instead of flags when already possible. Signed-off-by:
-
Sakari Ailus authored
As part of removing mbus config flags, remove VC flag use in the microchip-csi2dc driver. The support can be reintroduced later on as part of the streams patches. [mchehab: patch accepted by Eugen: https://lore.kernel.org/linux-media/c0676a4e-803f-9f1c-542b-4b007705ef3d@microchip.com/, so add an accepted-by tag] Accepted-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Robert Foss authored
QCOM ISPs do not support having a programmable CSI Clock Lane number. In order to accurately reflect this, the different CSIPHY HW versions need to have their own register layer for computing lane masks. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
- 16 Feb, 2022 4 commits
-
-
Tom Rix authored
Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all the size checking done later in hdmi_infoframe_unpack(). A better value is the amount of data read into buffer. Fixes: 480b8b3e ("video/hdmi: Pass buffer size to infoframe unpack functions") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Laurent Pinchart authored
The vimc driver is used for testing purpose, and some test use cases involve sharing buffers with a consumer device. Consumers often require DMA contiguous memory, which vimc doesn't currently support. This leads in the best case to usage of bounce buffers, which is very slow, and in the worst case in a complete failure. Add support for the dma-contig allocator in vimc to support those use cases properly. The allocator is selected through a new "allocator" module parameter, which defaults to vmalloc. [hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig] Signed-off-by:
-
Neil Armstrong authored
The CLIP, SRC & DST registers are coded to take the pixel/line start & end, starting from 0. Thus the end should be the width/height minus 1. It can be an issue with clipping and rotation, where it will add spurious lines from uninitialized or unwanted data with a shift in the result. Fixes: 59a63532 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Maxime Jourdan authored
Tag all the coded formats where the s5p_mfc decoder supports dynamic resolution switching or has a bytestream parser. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by:
-
- 08 Feb, 2022 1 commit
-
-
Tsuchiya Yuto authored
The dummy_ptr check in hmm_init() [1] results in the following "hmm_init Failed to create sysfs" error exactly once every two times on atomisp reload by rmmod/insmod (although atomisp module loads and works fine regardless of this error): [ 140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo' [ 140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G C OE 5.15.0-rc4-1-surface-mainline #1 b8acf6eb64994414b2e20bad312a7a2c45f748f9 [ 140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015 [ 140.230678] Call Trace: [ 140.230687] dump_stack_lvl+0x46/0x5a [ 140.230702] sysfs_warn_dup.cold+0x17/0x24 [ 140.230710] sysfs_add_file_mode_ns+0x160/0x170 [ 140.230717] internal_create_group+0x126/0x390 [ 140.230723] hmm_init+0x5c/0x70 [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99] [ 140.230811] atomisp_pci_probe.cold+0x1136/0x148e [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99] [ 140.230875] local_pci_probe+0x45/0x80 [ 140.230882] ? pci_match_device+0xd7/0x130 [ 140.230887] pci_device_probe+0xfa/0x1b0 [ 140.230892] really_probe+0x1f5/0x3f0 [ 140.230899] __driver_probe_device+0xfe/0x180 [ 140.230903] driver_probe_device+0x1e/0x90 [ 140.230908] __driver_attach+0xc0/0x1c0 [ 140.230912] ? __device_attach_driver+0xe0/0xe0 [ 140.230915] ? __device_attach_driver+0xe0/0xe0 [ 140.230919] bus_for_each_dev+0x89/0xd0 [ 140.230924] bus_add_driver+0x12b/0x1e0 [ 140.230929] driver_register+0x8f/0xe0 [ 140.230933] ? 0xffffffffc153f000 [ 140.230937] do_one_initcall+0x57/0x220 [ 140.230945] do_init_module+0x5c/0x260 [ 140.230952] load_module+0x24bd/0x26a0 [ 140.230962] ? __do_sys_finit_module+0xae/0x110 [ 140.230966] __do_sys_finit_module+0xae/0x110 [ 140.230972] do_syscall_64+0x5c/0x80 [ 140.230979] ? syscall_exit_to_user_mode+0x23/0x40 [ 140.230983] ? do_syscall_64+0x69/0x80 [ 140.230988] ? exc_page_fault+0x72/0x170 [ 140.230991] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 140.230997] RIP: 0033:0x7f7fd5d8718d [ 140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 140.231006] RSP: 002b:00007ffefc25f0e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 140.231012] RAX: ffffffffffffffda RBX: 000055ac3edcd7f0 RCX: 00007f7fd5d8718d [ 140.231015] RDX: 0000000000000000 RSI: 000055ac3d723270 RDI: 0000000000000003 [ 140.231017] RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f7fd5e52380 [ 140.231019] R10: 0000000000000003 R11: 0000000000000246 R12: 000055ac3d723270 [ 140.231021] R13: 0000000000000000 R14: 000055ac3edd06e0 R15: 0000000000000000 [ 140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs The problem is that dummy_ptr == 0 is a valid value. So, change the logic which checks if dummy_ptr was allocated. At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp reload by rmmod/insmod. Again, the check is wrong there. So, change both checks for mmgr_EXCEPTION, which is the error value when HMM allocation fails, and initialize dummy_ptr with such value. [1] added on commit d9ab8395 ("media: atomisp: don't cause a warn if probe failed") [2] added on commit b83cc378 ("atomisp: clean up the hmm init/cleanup indirections") Link: https://lore.kernel.org/linux-media/20211017162337.44860-3-kitakar@gmail.comSigned-off-by:Tsuchiya Yuto <kitakar@gmail.com> Co-developed-by:
-
