- 11 Jun, 2015 4 commits
-
-
ludovic.desroches@atmel.com authored
The xdmac channel configuration is done in one cell not two. This error prevents from probing devices correctly. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 83906783 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes") Cc: stable@vger.kernel.org # 4.1 Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Kevin Hilman <khilman@linaro.org>
-
git://github.com/hisilicon/linux-hisiKevin Hilman authored
ARM64: DT: Hisilicon hi6220 soc and hikey board updates for 4.2 - Added the devicetree bindings document for hi6220 SoC - Added the devicetree bindings document for hi6220 clock - Added dts files for hi6220 SoC and hikey board * tag 'hi6620-dt-for-4.2' of git://github.com/hisilicon/linux-hisi: arm64: dts: Add dts files for Hisilicon Hi6220 SoC clk: hi6220: Document devicetree bindings for hi6220 clock arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
-
Kevin Hilman authored
Merge tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Fourth batch of DT changes for 4.2: - rtc node for at91sam9rl/at91sam9rlek - move to stdout-path for console on kizbox and all Atmel's boards - Addition of the Acme Systems' Arietta G25 - two little fixes for Kizbox and sama5d4ek * tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ARM: at91/dt: Add Acme Arietta G25 ARM: at91/dt: sama5d4 xplained: use stdout-path ARM: at91/dt: sama5d4ek: use stdout-path ARM: at91/dt: sama5d3 xplained: use stdout-path ARM: at91/dt: sama5d3xek: use stdout-path ARM: at91/dt: at91sam9x5ek: use stdout-path ARM: at91/dt: at91sam9rlek: use stdout-path ARM: at91/dt: at91sam9n12ek: use stdout-path ARM: at91/dt: at91sam9m10g45ek use stdout-path ARM: at91/dt: at91sam9g20ek: use stdout-path ARM: at91/dt: at91sam9263ek: use stdout-path ARM: at91/dt: at91sam9261ek: use stdout-path ARM: at91/dt: at91rm9200ek: use stdout-path ARM: at91/dt: kizbox: use stdout-path ARM: at91/dt: at91sam9rlek: add RTC ARM: at91/dt: at91sam9rl: fix rtc node
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxKevin Hilman authored
The i.MX device tree changes for 4.2: - Add device tree for i.MX7D SoC and imx7d-sdb board - New i.MX6 board support: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - Change LVDS to use simple-panel for nitrogen6x and sabrelite boards - Add Wifi/Bluetooth devices support for cubox-i board - Remove unused regulators and correct OTG roles setting for imx6sl-warp board - Add I2C support for imx23-olinuxino board - Move imx6qdl HDMI device to a better place - Add power-domain for imx6qdl CODA device * tag 'imx-dt-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits) ARM: dts: imx6dl: add imx6dl gpt specific compatible string ARM: dts: imx6: add DT for aristainetos2 board ARM: dts: cubox-i/hummingboard: Fix the license text ARM: dts: sabrelite: use simple-panel instead of display-timings for LVDS0 ARM: dts: nitrogen6x: use simple-panel instead of display-timings for LVDS0 ARM: dts: add imx7d-sdb support ARM: dts: add imx7d soc dtsi file ARM: dts: Armadeus Systems APF6 family support (i.MX6) ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. ARM: dts: cubox-i: add support for Broadcom Wifi/Bluetooth devices Document: dt: binding: imx: update document for imx7d support ARM: dts: imx6qdl: Add power-domain phandle to CODA device node ARM: dts: Gateworks GW5510 support (i.MX6) ARM: dts: imx6sl-warp: Fix OTG roles ARM: dts: imx6sl-warp: Remove USB regulators ARM: dts: imx6sl-warp: Remove unused regulator ARM: dts: add pinfunc include file to support imx7d ARM: mxs: fix in tree users of ssd1306 ARM: dts: imx6qdl-hummingboard: Add PCIe support ARM: dts: imx23-olinuxino: Add i2c support ...
-
- 10 Jun, 2015 12 commits
-
-
Kevin Hilman authored
Merge tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Keystone DTS update for 4.2 - Includes NETCP related EVM updates * tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: k2l: fix the netcp range size ARM: dts: k2e: fix the netcp range size ARM: dts: k2hk: fix the netcp range size ARM: dts: k2l-evm: Add device bindings for netcp driver ARM: dts: k2e-evm: Add device bindings for netcp driver ARM: dts: k2hk-evm: Add device bindings for netcp driver
-
https://github.com/Broadcom/stblinuxKevin Hilman authored
This pull request contains Broadcom BCM5301x related changes: - Hauke adds the interrupt mapping for the BCM5301x PCIe controller - Haule adds support for NAND flash using the standard Broadcom NAND controller iProc specific binding on BCM4708/5301x - Rafal adds support for the Asus RT-AC87U router * tag 'arm-soc/for-4.2/dts-part3' of https://github.com/Broadcom/stblinux: ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description
-
Maxime Coquelin authored
The STMicrolectornics's STM32F429 MCU has the following main features: - Cortex-M4 core running up to @180MHz - 2MB internal flash, 256KBytes internal RAM - FMC controller to connect SDRAM, NOR and NAND memories - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller Tested-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by:
-
Kevin Hilman authored
Merge tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.2, take 2 A bunch of new DT changes for the 4.2 merge window, among which: - Enable the SRAM controller on the A10/A10s/A13/A20 - A33 support - New boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G * tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box ARM: dts: sun8i: Add dts file for the GA10H-A33 tablet ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board. ARM: dts: sun8i-a33: Add pinmux setting for uart0 on PB pins ARM: dts: sun8i: Add pinmux setting for 8bit mmc2 ARM: dts: sun8i: Add usb_clk node for a23/a33 ARM: dts: sun8i: Add ET-Q8 A33 support ARM: dts: sun8i: Add sun8i-a33 dtsi ARM: dts: sun8i: Add sun8i-a23-a33 dtsi ARM: dts: sun7i: Add A20 SRAM and SRAM controller ARM: dts: sun5i: Add A10s and A13 SRAM and SRAM controller ARM: dts: sun4i: Add A10 SRAM and SRAM controller ARM: dts: sunxi: Revert SRAM controller drivers patches ARM: dts: sun9i: Add device node for watchdog ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2 ARM: dts: sun7i: Add uart4_pins_b definition ARM: sun8i: Introduce A23 Evaluation Board Support
-
Dinh Nguyen authored
Update the arria10 gmac nodes with all the necessary properties for ethernet to function on the Arria10 devkit. Signed-off-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by:
-
Murali Karicheri authored
k2l netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes this. Similarly fix the size of switch module register space to 0x20000. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Santosh Shilimkar <ssantosh@kernel.org>
-
Murali Karicheri authored
k2e netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes this. Similarly fix the size of switch module register space to 0x20000. Signed-off-by:
-
Murali Karicheri authored
k2hk netcp range size is 1M (0x100000) and not 0xfffff. This patch fixes this. Signed-off-by:
-
Murali Karicheri authored
This patch enables networking on k2l evm by providing device bindings for netcp, knav, and qmss. See device binding documentation at Documentation/devicetree/bindings/net/keystone-netcp.txt Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
-
Murali Karicheri authored
This patch enables networking on k2e evm by adding device bindings for netcp, knav and qmss. See device binding documentation below for details. Documentation/devicetree/bindings/net/keystone-netcp.txt Signed-off-by:
-
Murali Karicheri authored
This patch enables networking on k2hk evm by adding device bindings for netcp, knav and qmss. See device binding documentation below for details. Documentation/devicetree/bindings/net/keystone-netcp.txt Signed-off-by:
-
Kevin Hilman authored
Merge tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA updates for v4.2 part 3 - Add SCU node for Arria 10 - Add enable-method for cpu nodes - Add SDRAM controller binding doc - Enable gpio-leds on SoCFPGA Socrates board * tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: socrates: add gpio-leds ARM: socfpga: socrates: enable gpio0/1 ARM: socfpga: dts: add sdram controller dt binding doc ARM: socfpga: dts: add enable-method property for cpu nodes ARM: socfpga: dts: add the a9-scu node for arria10
-
- 06 Jun, 2015 3 commits
-
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
Hauke Mehrtens authored
The driver for the PCIe controller was just added, this adds the missing definition of the IRQ numbers to device tree. The driver itself will be automatically detected by bcma. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
This adds the NAND flash chip description for a standard chip found connected to this SoC. This makes use of generic Broadcom NAND driver with the iProc interface. Signed-off-by:
-
- 05 Jun, 2015 3 commits
-
-
Bintian Wang authored
Add initial dtsi file to support Hisilicon Hi6220 SoC with support of Octal core CPUs in two clusters and each cluster has quard Cortex-A53. Also add dts file to support HiKey development board which based on Hi6220 SoC. Signed-off-by:
Bintian Wang <bintian.wang@huawei.com> Acked-by:
Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by:
Yiping Xu <xuyiping@hisilicon.com> Tested-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Tyler Baker <tyler.baker@linaro.org> Tested-by:
Wei Xu <xuwei5@hisilicon.com>
-
Bintian Wang authored
Document DT files bindings for Hisilicon hi6220 clock. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Bintian Wang authored
This patch adds documentation for the devicetree bindings used by the DT files of Hisilicon hi6220 SoC mobile platform. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 04 Jun, 2015 18 commits
-
-
Ludovic Desroches authored
Mci0 uses slot 0 not 1. Signed-off-by:
-
Gaël PORTAY authored
The network_red LED uses the 4th PWM device. Signed-off-by:
Gaël PORTAY <g.portay@overkiz.com> Signed-off-by:
-
Alexandre Belloni authored
Add a minimum Device Tree for Acme Arietta G25. http://acme.systems/ariettaSigned-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Sergio Tanzilli <tanzilli@acmesystems.it> Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the bootargs. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by:
-
Alexandre Belloni authored
Use stdout-path to specify the console. Signed-off-by:
-
Alexandre Belloni authored
The kizbox dts are using the deprecated linux,stdout-path. Replace those by stdout-path. Signed-off-by:
-
Alexandre Belloni authored
Add RTC support to the at91sam9rlek. Signed-off-by:
-
Alexandre Belloni authored
The RTC lives at 0xfffffe00. Also reorder the node properly. Signed-off-by:
-
