- 30 Sep, 2022 6 commits
-
-
Vladimir Oltean authored
When adding optional new features to Qdisc offloads, existing drivers must reject the new configuration until they are coded up to act on it. Since modifying all drivers in lockstep with the changes in the Qdisc can create problems of its own, it would be nice if there existed an automatic opt-in mechanism for offloading optional features. Jakub proposes that we multiplex one more kind of call through ndo_setup_tc(): one where the driver populates a Qdisc-specific capability structure. First user will be taprio in further changes. Here we are introducing the definitions for the base functionality. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/Suggested-by:
Jakub Kicinski <kuba@kernel.org> Co-developed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Yuan Can authored
After commit 09b5678c("tipc: remove dead code in tipc_net and relatives"), struct distr_queue_item is not used any more and can be removed as well. Signed-off-by:
Yuan Can <yuancan@huawei.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20220928085636.71749-1-yuancan@huawei.comSigned-off-by:
-
Paolo Abeni authored
After commit 3226b158 ("net: avoid 32 x truesize under-estimation for tiny skbs") we are observing 10-20% regressions in performance tests with small packets. The perf trace points to high pressure on the slab allocator. This change tries to improve the allocation schema for small packets using an idea originally suggested by Eric: a new per CPU page frag is introduced and used in __napi_alloc_skb to cope with small allocation requests. To ensure that the above does not lead to excessive truesize underestimation, the frag size for small allocation is inflated to 1K and all the above is restricted to build with 4K page size. Note that we need to update accordingly the run-time check introduced with commit fd9ea57f ("net: add napi_get_frags_check() helper"). Alex suggested a smart page refcount schema to reduce the number of atomic operations and deal properly with pfmemalloc pages. Under small packet UDP flood, I measure a 15% peak tput increases. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Suggested-by:
Alexander H Duyck <alexanderduyck@fb.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Kees Cook authored
To work around a misbehavior of the compiler's ability to see into composite flexible array structs (as detailed in the coming memcpy() hardening series[1]), use unsafe_memcpy(), as the sizing, bounds-checking, and allocation are all very tightly coupled here. This silences the false-positive reported by syzbot: memcpy: detected field-spanning write (size 80) of single field "&n->sel" at net/sched/cls_u32.c:1043 (size 16) [1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reported-by: syzbot+a2c4601efc75848ba321@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/000000000000a96c0b05e97f0444@google.com/Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220927153700.3071688-1-keescook@chromium.orgSigned-off-by:
-
Marek Vasut authored
The stmmac-axi-config subnode is present in multiple dwmac instance DTs, document its content per snps,axi-config property description which is a phandle to this subnode. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220927012449.698915-1-marex@denx.deSigned-off-by:
-
Jakub Kicinski authored
nlmsg_flags are full of historical baggage, inconsistencies and strangeness. Try to document it more thoroughly. Explain the meaning of the ECHO flag (and while at it clarify the comment in the uAPI). Handwave a little about the NEW request flags and how they make sense on the surface but cater to really old paradigm before commands were a thing. I will add more notes on how to make use of ECHO and discouragement for reuse of flags to the kernel-side documentation. Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.orgSigned-off-by:
-
- 29 Sep, 2022 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wifi and can. Current release - regressions: - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume() - wifi: fix locking in mac80211 mlme - eth: - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()" - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe Previous releases - regressions: - wifi: fix regression with non-QoS drivers Previous releases - always broken: - mptcp: fix unreleased socket in accept queue - wifi: - don't start TX with fq->lock to fix deadlock - fix memory corruption in minstrel_ht_update_rates() - eth: - macb: fix ZynqMP SGMII non-wakeup source resume failure - mt7531: only do PLL once after the reset - usbnet: fix memory leak in usbnet_disconnect() Misc: - usb: qmi_wwan: add new usb-id for Dell branded EM7455" * tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits) mptcp: fix unreleased socket in accept queue mptcp: factor out __mptcp_close() without socket lock net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2} net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge can: c_can: don't cache TX messages for C_CAN cores ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 selftests: Fix the if conditions of in test_extra_filter() net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() net: stmmac: power up/down serdes in stmmac_open/release wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value net: hippi: Add missing pci_disable_device() in rr_init_one() net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - small fixes for iqs62x-keys and melfas_mip4 drivers - corrected register address in snvs_pwrkey driver - Synaptic driver will stop trying to use intertouch (native) mode on some Lenovo AMD devices * tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1 Input: iqs62x-keys - drop unused device node references Input: melfas_mip4 - fix return value check in mip4_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fixes from Damien Le Moal: "Three late patches to fix problems discovered recently: - Add a horkage to disable link power management by default for the Pioneer BDR-207M and BDR-205 DVD drives (from Niklas) - Two patches to fix setting the maximum queue depth of libsas owned ATA devices (from me)" * tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Fix device queue depth control ata: libata-scsi: Fix initialization of device queue depth libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205 -
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some trivial fixes and cleanup" * tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Clean up loongson3_smp_ops declaration LoongArch: Fix and cleanup csr_era handling in do_ri() LoongArch: Align the address of kernel_entry to 4KB
-
ruanjinjie authored
Add __init/__exit annotations to module init/exit funcs Signed-off-by:
ruanjinjie <ruanjinjie@huawei.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220928031708.89120-1-ruanjinjie@huawei.comSigned-off-by:
-
Yang Yingliang authored
The 'mem' returned by platform_get_resource() has been checked in probe function, so it is no need do this check in remove function. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220927151406.797800-1-yangyingliang@huawei.comSigned-off-by:
-
Shang XiaoJing authored
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund@corigine.com> Link: https://lore.kernel.org/r/20220927141835.19221-1-shangxiaojing@huawei.comSigned-off-by:
-
Yuan Can authored
After commit 6870957e("liquidio: make soft command calls synchronous"), no one use struct lio_trusted_vf_ctx, so remove it. Signed-off-by:
-
Liu Shixin authored
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220927111925.2424100-1-liushixin2@huawei.comSigned-off-by:
-
Shang XiaoJing authored
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by:
-
Shang XiaoJing authored
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by:
-
Shang XiaoJing authored
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter and clear. Drop the tmp variable that is not needed any more. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2022-09-27 This is Part #1 of 4 parts series to align mlx5's implementation of XSK (AF_XDP) RX-Qs indexing and management with other vendors: Maxim Says: =========== xsk: Bug fixes for frame mapping on striding RQ Striding RQ relies on the driver mapping RX buffers into the NIC's virtual memory space. Currently, regadless of the XSK frame size, mlx5e maps them using MTT, and each mapping's length is PAGE_SIZE. As the result, the stride size used by striding RQ is also equal to PAGE_SIZE. This decision has the following issues: 1. In the XSK aligned mode with frame size smaller than PAGE_SIZE, it's suboptimal. Using 2K strides and 2K pages allows to post twice as fewer WQEs. 2. MTT is not suitable for unaligned frames, as it requires natural alignment theoretically, in practice at least 8-byte alignment. 3. Using mapping and stride bigger than the frame has risk of writing over the bounds of the XSK frame upon receiving packets bigger than MTU, which is possible in some specific configurations. This series addresses issues 1 and 2 and alleviates issue 3. Where possible, page and stride size will match the XSK frame size (firmware upgrade may be needed to have effect for 2K frames). Unaligned mode will use KSM instead of MTT, which allows to drop the partial workaround [1]. [1]: https://lore.kernel.org/netdev/YufYFQ6JN91lQbso@boxer/T/ ==================== Link: https://lore.kernel.org/r/20220927203611.244301-1-saeed@kernel.orgSigned-off-by:
-
Maxim Mikityanskiy authored
Some of the parameters of striding RQ are compile-time constants, but they are going to become dynamically calculated at runtime in a following commit. This commit prepares the datapath to take cached runtime parameters, prefilled at queue creation. New fields added to struct mlx5e_rq fit into an existing 7-byte hole. Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Maxim Mikityanskiy authored
This commit moves the dma_info array to the end of struct mlx5e_mpw_info to make it a flexible array. It also removes the intermediate struct mlx5e_umr_dma_info, which used to contain only this array. The flexibility of dma_info will allow to choose its size dynamically in a following commit. Signed-off-by:
-
Maxim Mikityanskiy authored
Normally, the MTU change requires reopening the channels, but it can be skipped if the new MTU doesn't change any of the queue parameters and if MTU is not used in the data path. The shortcut is applicable to the non-linear mode of striding RQ, because the only thing affected by MTU is the queue length. As ethtool sets the queue length in packets, but striding RQ length is defined in strides or bytes, we estimate the RQ length to be at least as big as the requested number of MTU-sized packets, that's why it depends on MTU. Improve the shortcut by actually checking whether the RQ length stayed the same, instead of an intermediate step in the calculation. As MTU also affects the SHAMPO parameters, skip the shortcut if SHAMPO is in use. Signed-off-by:
-
Maxim Mikityanskiy authored
In a typical scenario, if an XSK socket is opened first, then an XDP program is attached, mlx5e_validate_xsk_param will be called twice: first on XSK bind, second on channel restart caused by enabling XDP. The validation includes a call to mlx5e_rx_is_linear_skb, which checks the presence of the XDP program. The above means that mlx5e_rx_is_linear_skb might return true the first time, but false the second time, as mlx5e_rx_get_linear_sz_skb's return value will increase, because of a different headroom used with XDP. As XSK RQs never exist without XDP, it would make sense to trick mlx5e_rx_get_linear_sz_skb into thinking XDP is enabled at the first check as well. This way, if MTU is too big, it would be detected on XSK bind, without giving false hope to the userspace application. However, it turns out that this check is too restrictive in the first place. SKBs created on XDP_PASS on XSK RQs don't have any headroom. That means that big MTUs filtered out on the first and the second checks might actually work. So, address this issue in the proper way, but taking into account the absence of the SKB headroom on XSK RQs, when calculating the buffer size. Signed-off-by:
-
Maxim Mikityanskiy authored
One of the checks in mlx5e_rx_is_linear_skb verifies that the RX buffer fits into the XSK frame size. Remove the duplicating check from mlx5e_validate_xsk_param. It allows to make mlx5e_rx_get_min_frag_sz static. Remove mlx5e_rx_is_xdp altogether, as its only usage is located in a branch where xsk == NULL. Signed-off-by:
-
Maxim Mikityanskiy authored
Linear RX buffers must be big enough to fit the MTU-sized packet along with the headroom. On the other hand, they must be small enough to fit into a page (or into an XSK frame). A straightforward way to check whether the linear mode is possible would be comparing the required buffer size to PAGE_SIZE or XSK frame size. Stride size in the linear mode is defined by the following constraints: 1. A stride is at least as big as the buffer size, and it's a power of two. 2. If non-XSK XDP is enabled, the stride size is PAGE_SIZE, because mlx5e requires each packet to be in its own page when XDP is in use. The previous constraint is automatically fulfilled, because buffer size can't be bigger than PAGE_SIZE. 3. XSK uses stride size equal to PAGE_SIZE, but the following commits will allow it to use roundup_pow_of_two(XSK frame size), by allowing the NIC's MMU to use page sizes not equal to the CPU page size. This commit puts the above requirements and constraints straight to the code in an attempt to simplify it and to prepare it for changes made in the next patches. For the reference, the old code uses an equivalent, but trickier calculation (high-level simplified pseudocode): if XDP or XSK: mlx5e_rx_get_linear_frag_sz := max(buffer size, PAGE_SIZE) else: mlx5e_rx_get_linear_frag_sz := buffer size mlx5e_rx_is_linear_skb := mlx5e_rx_get_linear_frag_sz <= PAGE_SIZE stride size := roundup_pow_of_two(mlx5e_rx_get_linear_frag_sz) The new code effectively removes mlx5e_rx_get_linear_frag_sz that used to return either buffer size or stride size, depending on the situation, making it hard to work with and to make changes: if XDP or XSK: mlx5e_rx_get_linear_stride_sz := PAGE_SIZE else mlx5e_rx_get_linear_stride_sz := roundup_pow_of_two(buffer size) mlx5e_rx_is_linear_skb := buffer size <= (PAGE_SIZE or XSK frame sz) stride size := mlx5e_rx_get_linear_stride_sz Signed-off-by: -
Maxim Mikityanskiy authored
Instead of WARNing in runtime when TLS offload WQEs posted to ICOSQ are over the hardware limit, check their size before enabling TLS RX offload, and block the offload if the condition fails. It also allows to drop a u16 field from struct mlx5e_icosq. Signed-off-by:
-
Maxim Mikityanskiy authored
TX MPWQE size is limited to the cacheline-aligned maximum. Use the same value for the stop room and the capability check. Signed-off-by:
-
Maxim Mikityanskiy authored
Fix a typo in the function name: mpqwe -> mpwqe (stands for multi-packet work queue element). Signed-off-by:
-
Maxim Mikityanskiy authored
mlx5e_alloc_xdpsq calculates sq->stop_room internally, but there is already a function for that: mlx5e_stop_room_for_max_wqe. This commit makes use of this function. Signed-off-by:
-
Maxim Mikityanskiy authored
To shorten and simplify code, let mlx5e_get_sw_max_sq_mpw_wqebbs accept mdev and derive max SQ WQEBBs from it. Also rename the function to a more generic name mlx5e_get_max_sq_aligned_wqebbs, because the following patches will use it in non-MPWQE contexts. Signed-off-by:
-
Maxim Mikityanskiy authored
Currently, the driver can silently fall back to legacy RQ after enabling XDP, even if striding RQ was active before. It happens when PAGE_SIZE is bigger than the maximum supported stride size. This commit changes this behavior to more straightforward: if an operation (enabling XDP) doesn't support the current parameters (striding RQ mode), it fails. Signed-off-by:
-
Maxim Mikityanskiy authored
mlx5e_verify_rx_mpwqe_strides is only used in en/params.c, so it can be made static and removed from en/params.h. Signed-off-by:
-
Maxim Mikityanskiy authored
No need to keep max_sq_wqebbs in mlx5e_txqsq and mlx5e_xdpsq, as it's only used when allocating the queues. Removing an extra field reduces the struct size. Signed-off-by:
-
Maxim Mikityanskiy authored
The return value of mlx5e_get_max_sq_wqebbs is clamped down to MLX5_SEND_WQE_MAX_WQEBBS = 16, which fits into u8. This commit changes the return type of this function to u8 for stricter type safety. Signed-off-by:
-
Maxim Mikityanskiy authored
Add the capability that will allow the driver to determine the minimal MTT page size to be able to map the smallest possible pages in XSK. The older firmwares that don't have this capability default to 12 (i.e. 4096-byte pages). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== updates from mlx5-next 2022-09-24 Updates form mlx5-next including[1]: 1) HW definitions and support for NPPS clock settings. 2) various cleanups 3) Enable hash mode by default for all NICs 4) page tracker and advanced virtualization HW definitions for vfio [1] https://lore.kernel.org/netdev/20220907233636.388475-1-saeed@kernel.org/ * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Remove from FPGA IFC file not-needed definitions net/mlx5: Remove unused structs net/mlx5: Remove unused functions net/mlx5: detect and enable bypass port select flow table net/mlx5: Lag, enable hash mode by default for all NICs net/mlx5: Lag, set active ports if support bypass port select flow table RDMA/mlx5: Don't set tx affinity when lag is in hash mode net/mlx5: add IFC bits for bypassing port select flow table net/mlx5: Add support for NPPS with real time mode net/mlx5: Expose NPPS related registers net/mlx5: Query ADV_VIRTUALIZATION capabilities net/mlx5: Introduce ifc bits for page tracker RDMA/mlx5: Move function mlx5_core_query_ib_ppcnt() to mlx5_ib ==================== Link: https://lore.kernel.org/all/20220927201906.234015-1-saeed@kernel.org/Signed-off-by:
-
Sean Anderson authored
Just use kzalloc instead. Fixes: d6f1e89b ("sunhme: Return an ERR_PTR from quattro_pci_find") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Anderson <seanga2@gmail.com> Link: https://lore.kernel.org/r/20220928004157.279731-1-seanga2@gmail.comSigned-off-by:
-
Shang XiaoJing authored
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220927023254.30342-1-shangxiaojing@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Rework resource allocation in Felix DSA driver The Felix DSA driver controls NXP variations of Microchip switches. Colin Foster is trying to add support in this driver for "genuine" Microchip hardware, but some of the NXP-isms in this driver need to go away before that happens cleanly. https://patchwork.kernel.org/project/netdevbpf/cover/20220926002928.2744638-1-colin.foster@in-advantage.com/ The starting point was Colin's patch 08/14 "net: dsa: felix: update init_regmap to be string-based", and this continues to be the central theme here, but things are done differently. In short (full explanations are in patches), the goal is for MFD-based switches like Colin's SPI-controlled VSC7512 to be able to request a regmap that was created 100% externally (by drivers/mfd/ocelot-core.c) in a very simple way, that does not create dependencies on other modules. That is dev_get_regmap(), and as input it wants a string, for the resource name. So we rework the resource allocation in this driver to be based on string names provided by the specific instantiation (in Colin's case, ocelot_ext.c). Patch set was boot-tested on NXP LS1028A. ==================== Link: https://lore.kernel.org/r/20220927191521.1578084-1-vladimir.oltean@nxp.comSigned-off-by:
-
