- 23 Jan, 2019 10 commits
-
-
Andrew Lunn authored
A few PHY drivers have the GPLv2+ license text. They then either have a MODULE_LICENSE() of GPLv2 only, or an SPDX tag of GPLv2 only. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup the others when there are contradictions. Cc: David Wu <david.wu@rock-chips.com> Cc: Dongpo Li <lidongpo@hisilicon.com> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Agner authored
According to the device tree binding the phy-supply property is optional. Use the regulator_get_optional API accordingly. The code already handles NULL just fine. This gets rid of the following warning: fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lubomir Rintel authored
This message gets logged far too often for how interesting is it. Most distributions nowadays configure NetworkManager to use randomly generated MAC addresses for Wi-Fi network scans. The interfaces end up being periodically brought down for the address change. When they're subsequently brought back up, the message is logged, eventually flooding the log. Perhaps the message is not all that helpful: it seems to be more interesting to hear when the addrconf actually start, not when it does not. Let's lower its level. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-By: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Atsushi Nemoto authored
The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Converted to use "imply" instead of "select" for PTP_1588_CLOCK driver selecting. This could break the hard dependency between the PTP clock subsystem and ethernet drivers. This patch also set "default y" for dpaa2 ptp driver building to provide user an available ptp clock in default. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michal Kalderon says: ==================== qed*: Error recovery process Parity errors might happen in the device's memories due to momentary bit flips which are caused by radiation. Errors that are not correctable initiate a process kill event, which blocks the device access towards the host and the network, and a recovery process is started in the management FW and in the driver. This series adds the support of this process in the qed core module and in the qede driver (patches 2 & 3). Patch 1 in the series revises the load sequence, to avoid PCI errors that might be observed during a recovery process. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
This patch adds the error recovery process in the qede driver. The process includes a partial/customized driver unload and load, which allows it to look like a short suspend period to the kernel while preserving the net devices' state. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
This patch adds the detection and handling of a parity error ("process kill event"), including the update of the protocol drivers, and the prevention of any HW access that will lead to device access towards the host while recovery is in progress. It also provides the means for the protocol drivers to trigger a recovery process on their decision. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
Initiating final cleanup after an ungraceful driver unload can lead to bad PCI accesses towards the host. This patch revises the load sequence so final cleanup is sent while the internal master enable is cleared, to prevent the host accesses, and clears the internal error indications just before enabling the internal master enable. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
in6_dump_addrs() returns a positive 1 if there was nothing to dump. This return value can not be passed as return from inet6_dump_addr() as is, because it will confuse rtnetlink, resulting in NLMSG_DONE never getting set: $ ip addr list dev lo EOF on netlink Dump terminated v2: flip condition to avoid a new goto (DaveA) Fixes: 7c1e8a38 ("netlink: fixup regression in RTM_GETADDR") Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Jan, 2019 2 commits
-
-
Lorenzo Bianconi authored
Use ERSPAN key header field as tunnel key in gre_parse_header routine since ERSPAN protocol sets the key field of the external GRE header to 0 resulting in a tunnel lookup fail in ip6gre_err. In addition remove key field parsing and pskb_may_pull check in erspan_rcv and ip6erspan_rcv Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Gleixner authored
The recent addition of SPDX license identifiers to the files in drivers/net/ethernet/sun created a licensing conflict. The cassini driver files contain a proper license notice: * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. but the SPDX change added: SPDX-License-Identifier: GPL-2.0 So the file got tagged GPL v2 only while in fact it is licensed under GPL v2 or later. It's nice that people care about the SPDX tags, but they need to be more careful about it. Not everything under (the) sun belongs to ... Fix up the SPDX identifier and remove the boiler plate text as it is redundant. Fixes: c861ef83 ("sun: Add SPDX license tags to Sun network drivers") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Shannon Nelson <shannon.nelson@oracle.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Jan, 2019 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Fix console ramoops to show the previous boot logs (Sai Prakash Ranjan) - Avoid allocation and leak of platform data * tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Avoid allocation and leak of platform data pstore/ram: Fix console ramoops to show the previous boot logs
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Fix ARM per-task stack protector plugin under GCC 9 (Ard Biesheuvel)" * tag 'gcc-plugins-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+ gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
-
- 20 Jan, 2019 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
-
Kees Cook authored
Yue Hu noticed that when parsing device tree the allocated platform data was never freed. Since it's not used beyond the function scope, this switches to using a stack variable instead. Reported-by: Yue Hu <huyue2@yulong.com> Fixes: 35da6094 ("pstore/ram: add Device Tree bindings") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
-
Ard Biesheuvel authored
GCC 9 reworks the way the references to the stack canary are emitted, to prevent the value from being spilled to the stack before the final comparison in the epilogue, defeating the purpose, given that the spill slot is under control of the attacker that we are protecting ourselves from. Since our canary value address is obtained without accessing memory (as opposed to pre-v7 code that will obtain it from a literal pool), it is unlikely (although not guaranteed) that the compiler will spill the canary value in the same way, so let's just disable this improvement when building with GCC9+. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kees Cook <keescook@chromium.org>
-
Ard Biesheuvel authored
The ARM per-task stack protector GCC plugin hits an assert in the compiler in some case, due to the fact the the SP mask expression is not sign-extended as it should be. So fix that. Suggested-by: Kugan Vivekanandarajah <kugan.vivekanandarajah@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kees Cook <keescook@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: Use copy_to_iter() to send control queue response vhost: return EINVAL if iovecs size does not match the message size virtio-balloon: tweak config_changed implementation virtio: don't allocate vqs when names[i] = NULL virtio_pci: use queue idx instead of array idx to set up the vq virtio: document virtio_config_ops restrictions virtio: fix virtio_config_ops description
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A handful of fixes (some of them in testing for a long time): - fix some test failures regarding cleanup after transaction abort - revert of a patch that could cause a deadlock - delayed iput fixes, that can help in ENOSPC situation when there's low space and a lot data to write" * tag 'for-5.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: wakeup cleaner thread when adding delayed iput btrfs: run delayed iputs before committing btrfs: wait on ordered extents on abort cleanup btrfs: handle delayed ref head accounting cleanup in abort Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
-
Linus Torvalds authored
Merge tags 'compiler-attributes-for-linus-v5.0-rc3' and 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux Pull misc clang fixes from Miguel Ojeda: - A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin - Update clang-format with the latest for_each macro list from Jason Gunthorpe * tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR * tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: clang-format: Update .clang-format with the latest for_each macro list
-
Florian La Roche authored
If an input number x for int_sqrt64() has the highest bit set, then fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm. Subtracting 1 is a better guess for the initial value of m anyway and that's what also done in int_sqrt() implicitly [*]. [*] Note how int_sqrt() uses __fls() with two underscores, which already returns the proper raw bit number. In contrast, int_sqrt64() used fls64(), and that returns bit numbers illogically starting at 1, because of error handling for the "no bits set" case. Will points out that he bug probably is due to a copy-and-paste error from the regular int_sqrt() case. Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") makes the access_ok() check part of the user_access_begin() preceding a series of 'unsafe' accesses. This has the desirable effect of ensuring that all 'unsafe' accesses have been range-checked, without having to pick through all of the callsites to verify whether the appropriate checking has been made. However, the consolidated range check does not inhibit speculation, so it is still up to the caller to ensure that they are not susceptible to any speculative side-channel attacks for user addresses that ultimately fail the access_ok() check. This is an oversight, so use __uaccess_begin_nospec() to ensure that speculation is inhibited until the access_ok() check has passed. Reported-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc3. We've plugged a couple of nasty issues involving KASLR-enabled kernels, and removed a redundant #define that was introduced as part of the KHWASAN fixes from akpm at -rc2. - Fix broken kpti page-table rewrite in bizarre KASLR configuration - Fix module loading with KASLR - Remove redundant definition of ARCH_SLAB_MINALIGN" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kasan, arm64: remove redundant ARCH_SLAB_MINALIGN define arm64: kaslr: ensure randomized quantities are clean to the PoC arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced on
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem. 2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter. 3) Fix map in map masking to prevent out-of-bounds access under speculative execution, from Daniel. 4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal pacing, from Yuchung. 5) Fix json writer license in bpftool, from Thomas. 6) Fix AF_XDP to check if an actually queue exists during umem setup, from Krzysztof. 7) Several fixes to BPF stackmap's build id handling. Another fix for bpftool build to account for libbfd variations wrt linking requirements, from Stanislav. 8) Fix BPF samples build with clang by working around missing asm goto, from Yonghong. 9) Fix libbpf to retry program load on signal interrupt, from Lorenz. 10) Various minor compile warning fixes in BPF code, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Syzkaller was able to construct a packet of negative length by redirecting from bpf_prog_test_run_skb with BPF_PROG_TYPE_LWT_XMIT: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:345 [inline] BUG: KASAN: slab-out-of-bounds in skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline] BUG: KASAN: slab-out-of-bounds in __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395 Read of size 4294967282 at addr ffff8801d798009c by task syz-executor2/12942 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x23/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:345 [inline] skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline] __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395 __pskb_copy include/linux/skbuff.h:1053 [inline] pskb_copy include/linux/skbuff.h:2904 [inline] skb_realloc_headroom+0xe7/0x120 net/core/skbuff.c:1539 ipip6_tunnel_xmit net/ipv6/sit.c:965 [inline] sit_tunnel_xmit+0xe1b/0x30d0 net/ipv6/sit.c:1029 __netdev_start_xmit include/linux/netdevice.h:4325 [inline] netdev_start_xmit include/linux/netdevice.h:4334 [inline] xmit_one net/core/dev.c:3219 [inline] dev_hard_start_xmit+0x295/0xc90 net/core/dev.c:3235 __dev_queue_xmit+0x2f0d/0x3950 net/core/dev.c:3805 dev_queue_xmit+0x17/0x20 net/core/dev.c:3838 __bpf_tx_skb net/core/filter.c:2016 [inline] __bpf_redirect_common net/core/filter.c:2054 [inline] __bpf_redirect+0x5cf/0xb20 net/core/filter.c:2061 ____bpf_clone_redirect net/core/filter.c:2094 [inline] bpf_clone_redirect+0x2f6/0x490 net/core/filter.c:2066 bpf_prog_41f2bcae09cd4ac3+0xb25/0x1000 The generated test constructs a packet with mac header, network header, skb->data pointing to network header and skb->len 0. Redirecting to a sit0 through __bpf_redirect_no_mac pulls the mac length, even though skb->data already is at skb->network_header. bpf_prog_test_run_skb has already pulled it as LWT_XMIT !is_l2. Update the offset calculation to pull only if skb->data differs from skb->network_header, which is not true in this case. The test itself can be run only from commit 1cf1cae9 ("bpf: introduce BPF_PROG_TEST_RUN command"), but the same type of packets with skb at network header could already be built from lwt xmit hooks, so this fix is more relevant to that commit. Also set the mac header on redirect from LWT_XMIT, as even after this change to __bpf_redirect_no_mac that field is expected to be set, but is not yet in ip_finish_output2. Fixes: 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Michael S. Tsirkin authored
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is safe to call in a non-napi context as long as the napi_budget flag is correct. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Jan, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Fix IPI handling for Lantiq SoCs, which was broken by changes made back in v4.12. - Enable OF/DT serial support in ath79_defconfig to give us working serial by default. - Fix 64b builds for the Jazz platform. - Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers to perform DMA again following the major DMA mapping changes made in v4.19. - Disable MSI on Cavium Octeon systems when the pcie_disable command line parameter introduced in v3.3 is used, in order to avoid inadvetently accessing PCIe controller registers despite the command line. - Fix a build failure for Cavium Octeon kernels with kexec enabled, introduced in v4.20. - Fix a regression in the behaviour of semctl/shmctl/msgctl IPC syscalls for kernels including n32 support but not o32 support caused by some cleanup in v3.19. * tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix kexec support mips: fix n32 compat_ipc_parse_version Disable MSI also when pcie-octeon.pcie_disable on MIPS: BCM47XX: Setup struct device for the SoC MIPS: jazz: fix 64bit build MIPS: ath79: Enable OF serial ports in the default config MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ MIPS: lantiq: Fix IPI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fix from Rob Herring: "A single build fix for powerpc due to device_node.type removal" * tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: powerpc: chrp: Use of_node_is_type to access device_type
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A crash fix, a build warning fix, a miscellaneous small cleanups. In case anyone is looking for them, there was a regression caught by testing that caused two patches to be dropped from this update. Those patches have been reworked and will soak for another week / re-target 5.0-rc4. - Fix driver initialization crash due to the inability to report an 'error' state for a DIMM's security capability. - Build warning fix for little-endian ARM64 builds - Fix a potential race between the EDAC driver's usage of the NFIT SMBIOS id for a DIMM and the driver shutdown path. - A small collection of one-line benign cleanups for duplicate variable assignments, a duplicate header include and a mis-typed function argument" * tag 'libnvdimm-fixes-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: Fix nvdimm_security_state() state request selection acpi/nfit: Remove duplicate set nd_set in acpi_nfit_init_interleave_set() acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id() libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMs nfit: Mark some functions as __maybe_unused ACPI/nfit: delete the function to_acpi_nfit_desc ACPI/nfit: delete the redundant header file
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - mt7621_wdt/rt2880_wdt: Fix compilation problem - tqmx86: Fix a couple IS_ERR() vs NULL bugs * tag 'linux-watchdog-5.0-rc-fixes' of git://www.linux-watchdog.org/linux-watchdog: watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: "These are mostly fixes for SUNRPC bugs, with a single v4.2 copy_file_range() fix mixed in. Stable bugfixes: - Fix TCP receive code on archs with flush_dcache_page() Other bugfixes: - Fix error code in rpcrdma_buffer_create() - Fix a double free in rpcrdma_send_ctxs_create() - Fix kernel BUG at kernel/cred.c:825 - Fix unnecessary retry in nfs42_proc_copy_file_range() - Ensure rq_bytes_sent is reset before request transmission - Ensure we respect the RPCSEC_GSS sequence number limit - Address Kerberos performance/behavior regression" * tag 'nfs-for-5.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Address Kerberos performance/behavior regression SUNRPC: Ensure we respect the RPCSEC_GSS sequence number limit SUNRPC: Ensure rq_bytes_sent is reset before request transmission NFSv4.2 fix unnecessary retry in nfs4_copy_file_range sunrpc: kernel BUG at kernel/cred.c:825! SUNRPC: Fix TCP receive code on archs with flush_dcache_page() xprtrdma: Double free in rpcrdma_sendctxs_create() xprtrdma: Fix error code in rpcrdma_buffer_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - block size setting fixes for loop/nbd (Jan Kara) - md bio_alloc_mddev() cleanup (Marcos) - Ensure we don't lose the REQ_INTEGRITY flag (Ming) - Two NVMe fixes by way of Christoph: - Fix NVMe IRQ calculation (Ming) - Uninitialized variable in nvmet-tcp (Sagi) - BFQ comment fix (Paolo) - License cleanup for recently added blk-mq-debugfs-zoned (Thomas) * tag 'for-linus-20190118' of git://git.kernel.dk/linux-block: block: Cleanup license notice nvme-pci: fix nvme_setup_irqs() nvmet-tcp: fix uninitialized variable access block: don't lose track of REQ_INTEGRITY flag blockdev: Fix livelocks on loop device nbd: Use set_blocksize() to set device blocksize md: Make bio_alloc_mddev use bio_alloc_bioset block, bfq: fix comments on __bfq_deactivate_entity
-
Jason Gunthorpe authored
Re-run the shell fragment that generated the original list. In particular this adds the missing xarray related functions. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
Camelia Groza authored
Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Commit 8ce5f841 ("of: Remove struct device_node.type pointer") removed struct device_node.type pointer, but the conversion to use of_node_is_type() accessor was missed in chrp_init_IRQ(). Fixes: 8ce5f841 ("of: Remove struct device_node.type pointer") Reported-by: kbuild test robot <lkp@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-01-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.18 ('net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames') The patch doesn't apply cleanly to 4.18.y, but it is very simple to resolve, what should be the procedure here ? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-