- 13 Sep, 2023 7 commits
-
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression for v4-mapped-v6 address Since bhash2 was introduced, bind() is broken in two cases related to v4-mapped-v6 address. This series fixes the regression and adds test to cover the cases. Changes: v2: * Added patch 1 to factorise duplicated comparison (Eric Dumazet) v1: https://lore.kernel.org/netdev/20230911165106.39384-1-kuniyu@amazon.com/ ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
We add these 8 test cases in bind_wildcard.c to check bind() conflicts. 1st bind() 2nd bind() --------- --------- 0.0.0.0 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 0.0.0.0 0.0.0.0 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 0.0.0.0 127.0.0.1 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 127.0.0.1 127.0.0.1 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 127.0.0.1 All test passed without bhash2 and with bhash2 and this series. Before bhash2: $ uname -r 6.0.0-rc1-00393-g0bf73255 $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Just after bhash2: $ uname -r 6.0.0-rc1-00394-g28044fc1 $ ./bind_wildcard ... ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 15 / 16 tests passed. On net.git: $ ./bind_wildcard ... not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 13 / 16 tests passed. With this series: $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
This is a preparation patch for the following patch. Let's define expected_errno in each test case so that we can add other test cases easily. Signed-off-by:
-
Kuniyuki Iwashima authored
The selftest passes the IPv6 address length for an IPv4 address. We should pass the correct length. Note inet_bind_sk() does not check if the size is larger than sizeof(struct sockaddr_in), so there is no real bug in this selftest. Fixes: 13715acf ("selftest: Add test for bind() conflicts.") Signed-off-by:
-
Kuniyuki Iwashima authored
Since bhash2 was introduced, the example below does not work as expected. These two bind() should conflict, but the 2nd bind() now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:127.0.0.1', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find() fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the new tb2 does not include the 1st socket, thus the bind() finally succeeds. In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find() returns the 1st socket's tb2. Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1, the 2nd bind() fails properly for the same reason mentinoed in the previous commit. Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Signed-off-by:Eric Dumazet <edumazet@google.com> Acked-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Andrei Vagin reported bind() regression with strace logs. If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4 socket to 127.0.0.1, the 2nd bind() should fail but now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:0.0.0.0', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check if tb has the v4-mapped-v6 wildcard address. The example above does not work after commit 5456262d ("net: Fix incorrect address comparison when searching for a bind2 bucket"), but the blamed change is not the commit. Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated as 0.0.0.0, and the sequence above worked by chance. Technically, this case has been broken since bhash2 was introduced. Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0, the 2nd bind() fails properly because we fall back to using bhash to detect conflicts for the v4-mapped-v6 address. Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Reported-by:Andrei Vagin <avagin@google.com> Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/Signed-off-by:
-
Kuniyuki Iwashima authored
This is a prep patch to make the following patches cleaner that touch inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any(). Both functions have duplicated comparison for netns, port, and l3mdev. Let's factorise them. Signed-off-by:
-
- 12 Sep, 2023 4 commits
-
-
Eric Dumazet authored
ip6_sock_set_addr_preferences() second argument should be an integer. SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were translated to IPV6_PREFER_SRC_TMP Fixes: 18d5ad62 ("ipv6: add ip6_sock_set_addr_preferences") Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Toke Høiland-Jørgensen authored
There's an early return in veth_set_features() if the device is in a down state, which leads to the XDP feature flags not being updated when enabling GRO while the device is down. Which in turn leads to XDP_REDIRECT not working, because the redirect code now checks the flags. Fix this by updating the feature flags after bringing the device up. Before this patch: NETDEV_XDP_ACT_BASIC: yes NETDEV_XDP_ACT_REDIRECT: yes NETDEV_XDP_ACT_NDO_XMIT: no NETDEV_XDP_ACT_XSK_ZEROCOPY: no NETDEV_XDP_ACT_HW_OFFLOAD: no NETDEV_XDP_ACT_RX_SG: yes NETDEV_XDP_ACT_NDO_XMIT_SG: no After this patch: NETDEV_XDP_ACT_BASIC: yes NETDEV_XDP_ACT_REDIRECT: yes NETDEV_XDP_ACT_NDO_XMIT: yes NETDEV_XDP_ACT_XSK_ZEROCOPY: no NETDEV_XDP_ACT_HW_OFFLOAD: no NETDEV_XDP_ACT_RX_SG: yes NETDEV_XDP_ACT_NDO_XMIT_SG: yes Fixes: fccca038 ("veth: take into account device reconfiguration for xdp_features flag") Fixes: 66c0e13a ("drivers: net: turn on XDP features") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20230911135826.722295-1-toke@redhat.comSigned-off-by:
-
Sascha Hauer authored
macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a7 ("net: macb: use resolved link config in mac_link_up()") Signed-off-by:Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.deSigned-off-by:
-
Liu Jian authored
I got the below warning when do fuzzing test: BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470 Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9 CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G OE Hardware name: linux,dummy-virt (DT) Workqueue: pencrypt_parallel padata_parallel_worker Call trace: dump_backtrace+0x0/0x420 show_stack+0x34/0x44 dump_stack+0x1d0/0x248 __kasan_report+0x138/0x140 kasan_report+0x44/0x6c __asan_load4+0x94/0xd0 scatterwalk_copychunks+0x320/0x470 skcipher_next_slow+0x14c/0x290 skcipher_walk_next+0x2fc/0x480 skcipher_walk_first+0x9c/0x110 skcipher_walk_aead_common+0x380/0x440 skcipher_walk_aead_encrypt+0x54/0x70 ccm_encrypt+0x13c/0x4d0 crypto_aead_encrypt+0x7c/0xfc pcrypt_aead_enc+0x28/0x84 padata_parallel_worker+0xd0/0x2dc process_one_work+0x49c/0xbdc worker_thread+0x124/0x880 kthread+0x210/0x260 ret_from_fork+0x10/0x18 This is because the value of rec_seq of tls_crypto_info configured by the user program is too large, for example, 0xffffffffffffff. In addition, TLS is asynchronously accelerated. When tls_do_encryption() returns -EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow, skmsg is released before the asynchronous encryption process ends. As a result, the UAF problem occurs during the asynchronous processing of the encryption module. If the operation is asynchronous and the encryption module returns EINPROGRESS, do not free the record information. Fixes: 635d9398 ("net/tls: free record only on encryption error") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.comSigned-off-by:
-
- 11 Sep, 2023 17 commits
-
-
Lorenzo Bianconi authored
MT7988 SoC support 3 NICs. Fix pse_port configuration in mtk_flow_set_output_device routine if the traffic is offloaded to eth2. Rely on mtk_pse_port definitions. Fixes: 88efedf5 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Daniel Golle authored
Variable dma_addr in function mtk_poll_rx can be uninitialized on some of the error paths. In practise this doesn't matter, even random data present in uninitialized stack memory can safely be used in the way it happens in the error path. However, in order to make Smatch happy make sure the variable is always initialized. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Shigeru Yoshida authored
syzbot reported a memory leak like below: BUG: memory leak unreferenced object 0xffff88810b088c00 (size 240): comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s) hex dump (first 32 bytes): 00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634 [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline] [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815 [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline] [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748 [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494 [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548 [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577 [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append newly allocated skbs to 'head'. If some bytes are copied, an error occurred, and jumped to out_error label, 'last_skb' is left unmodified. A later kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the 'head' frag_list and causing the leak. This patch fixes this issue by properly updating the last allocated skb in 'last_skb'. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccbSigned-off-by:Shigeru Yoshida <syoshida@redhat.com> Signed-off-by:
-
Hayes Wang authored
According to the document of napi, there is no rx process when the budget is 0. Therefore, r8152_poll() has to return 0 directly when the budget is equal to 0. Fixes: d2187f8e ("r8152: divide the tx and rx bottom functions") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA FDB regressions A report by Yanan Yang has prompted an investigation into the sja1105 driver's behavior w.r.t. multicast. The report states that when adding multicast L2 addresses with "bridge mdb add", only the most recently added address works - the others seem to be overwritten. This is solved by patch 3/5 (with patch 2/5 as a dependency for it). Patches 4/5 and 5/5 fix a series of race conditions introduced during the same patch set as the bug above, namely this one: https://patchwork.kernel.org/project/netdevbpf/cover/20211024171757.3753288-1-vladimir.oltean@nxp.com/ Finally, patch 1/5 fixes an issue found ever since the introduction of multicast forwarding offload in sja1105, which is that the multicast addresses are visible (with the "self" flag) in "bridge fdb show". ==================== Signed-off-by:
-
Vladimir Oltean authored
Currently, when we add the first sja1105 port to a bridge with vlan_filtering 1, then we sometimes see this output: sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2 It is because sja1105_fdb_add() runs from the dsa_owq which is no longer serialized with switch resets since it dropped the rtnl_lock() in the blamed commit. Either performing the FDB accesses before the reset, or after the reset, is equally fine, because sja1105_static_fdb_change() backs up those changes in the static config, but FDB access during reset isn't ok. Make sja1105_static_config_reload() take the fdb_lock to fix that. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood() runs from switchdev_deferred_process_work(). Prior to the blamed commit, they used to be indirectly serialized through the rtnl_lock(), which no longer holds true because dsa_owq dropped that. So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP elements concurrently compared to when we change them, in sja1105_static_fdb_change(). That is not ideal, since it might result in data corruption. Introduce a mutex which serializes accesses to the hardware FDB and to the static config elements for the L2 Address Lookup table. I can't find a good reason to add locking around sja1105_fdb_dump(). I'll add it later if needed. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by:
-
Vladimir Oltean authored
The commit cited in Fixes: did 2 things: it refactored the read-back polling from sja1105_dynamic_config_read() into a new function, sja1105_dynamic_config_wait_complete(), and it called that from sja1105_dynamic_config_write() too. What is problematic is the refactoring. The refactored code from sja1105_dynamic_config_poll_valid() works like the previous one, but the problem is that it uses another packed_buf[] SPI buffer, and there was code at the end of sja1105_dynamic_config_read() which was relying on the read-back packed_buf[]: /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. */ if (entry) ops->entry_packing(packed_buf, entry, UNPACK); After the change, the packed_buf[] that this code sees is no longer the entry read back from hardware, but the original entry that the caller passed to the sja1105_dynamic_config_read(), packed into this buffer. This difference is the most notable with the SJA1105_SEARCH uses from sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic added by commit 728db843 ("net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address") to figure out whether the address we're trying to add matches on any existing hardware entry, with the exception of the catch-all multicast address. That logic was broken, because with sja1105_dynamic_config_read() not working properly, it doesn't return us the entry read back from hardware, but the entry that we passed to it. And, since for multicast, a match will always exist, it will tell us that any mdb entry already exists at index=0 L2 Address Lookup table. It is index=0 because the caller doesn't know the index - it wants to find it out, and sja1105_dynamic_config_read() does: if (index < 0) { // SJA1105_SEARCH /* Avoid copying a signed negative number to an u64 */ cmd.index = 0; // <- this cmd.search = true; } else { cmd.index = index; cmd.search = false; } So, to the caller of sja1105_dynamic_config_read(), the returned info looks entirely legit, and it will add all mdb entries to FDB index 0. There, they will always overwrite each other (not to mention, potentially they can also overwrite a pre-existing bridge fdb entry), and the user-visible impact will be that only the last mdb entry will be forwarded as it should. The others won't (will be flooded or dropped, depending on the egress flood settings). Fixing is a bit more complicated, and involves either passing the same packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all the extra processing on the packed_buf[] to sja1105_dynamic_config_wait_complete(). I've opted for the latter, because it makes sja1105_dynamic_config_wait_complete() a bit more self-contained. Fixes: df405910 ("net: dsa: sja1105: wait for dynamic config command completion on writes too") Reported-by:
Yanan Yang <yanan.yang@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Currently, sja1105_dynamic_config_wait_complete() returns either 0 or -ETIMEDOUT, because it just looks at the read_poll_timeout() return code. There will be future changes which move some more checks to sja1105_dynamic_config_poll_valid(). It is important that we propagate their exact return code (-ENOENT, -EINVAL), because callers of sja1105_dynamic_config_read() depend on them. Signed-off-by:
-
Vladimir Oltean authored
Commit 4d942354 ("net: dsa: sja1105: offload bridge port flags to device") has partially hidden some multicast entries from showing up in the "bridge fdb show" output, but it wasn't enough. Addresses which are added through "bridge mdb add" still show up. Hide them all. Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by:
-
Ciprian Regus authored
Currently, when a new fdb entry is added (with both ports of the ADIN2111 bridged), the driver configures the MAC filters for the wrong port, which results in the forwarding being done by the host, and not actually hardware offloaded. The ADIN2111 offloads the forwarding by setting filters on the destination MAC address of incoming frames. Based on these, they may be routed to the other port. Thus, if a frame has to be forwarded from port 1 to port 2, the required configuration for the ADDR_FILT_UPRn register should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's currently the case). Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Ciprian Regus <ciprian.regus@analog.com> Reviewed-by:
-
Ziyang Xuan authored
Syzbot reports the following uninit-value access problem. ===================================================== BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 fill_frame_info net/hsr/hsr_forward.c:601 [inline] hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:644 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 It is because VLAN not yet supported in hsr driver. Return error when protocol is ETH_P_8021Q in fill_frame_info() now to fix it. Fixes: 451d8123 ("net: prp: add packet handling support") Reported-by: syzbot+bf7e6250c7ce248f3ec9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=bf7e6250c7ce248f3ec9Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
David S. Miller authored
Hangyu Hua says: ==================== Fix possible OOB write when using rule_buf ADD bounds checks in bcmasp_netfilt_get_all_active and mvpp2_ethtool_get_rxnfc and mtk_hwlro_get_fdir_all when using rule_buf from ethtool_get_rxnfc. v2: [PATCH v2 1/3]: use -EMSGSIZE instead of truncating the list sliently. [PATCH v2 3/3]: drop the brackets. ==================== Signed-off-by: -
Hangyu Hua authored
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid NULL pointer dereference. Fixes: 7aab747e ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
-
Hangyu Hua authored
rules is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rules to avoid OOB writing or NULL pointer dereference. Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Hangyu Hua authored
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid OOB writing or NULL pointer dereference. Fixes: c5d511c4 ("net: bcmasp: Add support for wake on net filters") Signed-off-by:
-
Vincent Whitchurch authored
Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the coalescing timer but currently it gets programmed with zero delay instead. Disable the use of the coalescing timer if tx-usecs is zero by preventing it from being restarted. Note that to keep things simple we don't start/stop the timer when the coalescing settings are changed, but just let that happen on the next transmit or timer expiry. Fixes: 8fce3331 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
- 10 Sep, 2023 7 commits
-
-
David S. Miller authored
Guangguan Wang says: ==================== Two fixes for SMC-R ==================== Signed-off-by: -
Guangguan Wang authored
While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 Fixes: 1f90a05d ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by:
Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by:
-
Guangguan Wang authored
In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used to determin whether to increase the v1 statistic or the v2 statistic. It is correct for SMCD. But for SMCR, smcr_version should be used. Signed-off-by:
-
Ratheesh Kannoth authored
The access to page pool `cache' array and the `count' variable is not locked. Page pool cache access is fine as long as there is only one consumer per pool. octeontx2 driver fills in rx buffers from page pool in NAPI context. If system is stressed and could not allocate buffers, refiiling work will be delegated to a delayed workqueue. This means that there are two cosumers to the page pool cache. Either workqueue or IRQ/NAPI can be run on other CPU. This will lead to lock less access, hence corruption of cache pool indexes. To fix this issue, NAPI is rescheduled from workqueue context to refill rx buffers. Fixes: b2e3406a ("octeontx2-pf: Add support for page pool") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
Jinjie Ruan authored
Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak occurs. If kzalloc() for duprule succeeds, but the following kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree them in the error path. unreferenced object 0xffff122744c50600 (size 192): comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'... backtrace: [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8 [<0000000001bedc67>] kmalloc_trace+0x38/0x88 [<00000000b0612f98>] vcap_dup_rule+0x50/0x460 [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038 [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494 [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698 [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94 [<00000000f6864acf>] kthread+0x2e8/0x374 [<0000000022e639b3>] ret_from_fork+0x10/0x20 Fixes: 814e7693 ("net: microchip: vcap api: Add a storage state to a VCAP rule") Signed-off-by:Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by:
-
Julia Lawall authored
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. This was done using the Coccinelle semantic patch iterators/for_each_child.cocci Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by:
-
Juntong Deng authored
Starting with v197, systemd uses predictable interface network names, the traditional interface naming scheme (eth0) is deprecated, therefore it cannot be assumed that the eth0 interface exists on the host. This modification makes the bind_bhash test program run in a separate network namespace and no longer needs to consider the name of the network interface on the host. Signed-off-by:
Juntong Deng <juntong.deng@outlook.com> Signed-off-by:
-
- 08 Sep, 2023 4 commits
-
-
Liu Jian authored
I got the below warning when do fuzzing test: unregister_netdevice: waiting for bond0 to become free. Usage count = 2 It can be repoduced via: ip link add bond0 type bond sysctl -w net.ipv4.conf.bond0.promote_secondaries=1 ip addr add 4.117.174.103/0 scope 0x40 dev bond0 ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0 ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0 ip addr del 4.117.174.103/0 scope 0x40 dev bond0 ip link delete bond0 type bond In this reproduction test case, an incorrect 'last_prim' is found in __inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40) is lost. The memory of the secondary address is leaked and the reference of in_device and net_device is leaked. Fix this problem: Look for 'last_prim' starting at location of the deleted IP and inserting the promoted IP into the location of 'last_prim'. Fixes: 0ff60a45 ("[IPV4]: Fix secondary IP addresses after promotion") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - eth: stmmac: fix failure to probe without MAC interface specified Current release - new code bugs: - docs: netlink: fix missing classic_netlink doc reference Previous releases - regressions: - deal with integer overflows in kmalloc_reserve() - use sk_forward_alloc_get() in sk_get_meminfo() - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc - fib: avoid warn splat in flow dissector after packet mangling - skb_segment: call zero copy functions before using skbuff frags - eth: sfc: check for zero length in EF10 RX prefix Previous releases - always broken: - af_unix: fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR() - netfilter: - nft_exthdr: fix non-linear header modification - xt_u32, xt_sctp: validate user space input - nftables: exthdr: fix 4-byte stack OOB write - nfnetlink_osf: avoid OOB read - one more fix for the garbage collection work from last release - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t - handshake: fix null-deref in handshake_nl_done_doit() - ip: ignore dst hint for multipath routes to ensure packets are hashed across the nexthops - phy: micrel: - correct bit assignments for cable test errata - disable EEE according to the KSZ9477 errata Misc: - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations - Revert "net: macsec: preserve ingress frame ordering", it appears to have been developed against an older kernel, problem doesn't exist upstream" * tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits) net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs() Revert "net: team: do not use dynamic lockdep key" net: hns3: remove GSO partial feature bit net: hns3: fix the port information display when sfp is absent net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue net: hns3: fix debugfs concurrency issue between kfree buffer and read net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read() net: hns3: Support query tx timeout threshold by debugfs net: hns3: fix tx timeout issue net: phy: Provide Module 4 KSZ9477 errata (DS80000754C) netfilter: nf_tables: Unbreak audit log reset netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID netfilter: nfnetlink_osf: avoid OOB read netfilter: nftables: exthdr: fix 4-byte stack OOB write selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc bpf: bpf_sk_storage: Fix invalid wait context lockdep report s390/bpf: Pass through tail call counter in trampolines ... -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull more devicetree updates from Rob Herring: "A couple of conversions which didn't get picked up by the subsystems and one fix: - Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT schema - Merge Omnivision OV5695 into OV5693 binding - Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY" * tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema media: dt-bindings: Convert Omnivision OV7251 to DT schema media: dt-bindings: Merge OV5695 into OV5693 binding of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY -
Linus Torvalds authored
Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various cleanups and fixes across the board" * tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits) pwm: lpc32xx: Remove handling of PWM channels pwm: atmel: Simplify using devm functions dt-bindings: pwm: brcm,kona-pwm: convert to YAML pwm: stmpe: Handle errors when disabling the signal pwm: stm32: Simplify using devm_pwmchip_add() pwm: stm32: Don't modify HW state in .remove() callback pwm: Fix order of freeing resources in pwmchip_remove() pwm: ntxec: Use device_set_of_node_from_dev() pwm: ntxec: Drop a write-only variable from driver data pwm: pxa: Don't reimplement of_device_get_match_data() pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled() pwm: atmel-tcb: Don't track polarity in driver data pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller pwm: atmel-tcb: Put per-channel data into driver data pwm: atmel-tcb: Fix resource freeing in error path and remove pwm: atmel-tcb: Harmonize resource allocation order pwm: Drop unused #include <linux/radix-tree.h> pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described pwm: Remove outdated documentation for pwmchip_remove() pwm: atmel: Enable clk when pwm already enabled in bootloader ...
-
- 07 Sep, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Subsystem: - Add a way for drivers to tell the core the supported alarm range is smaller than the date range. This is not used yet but will be useful for the alarmtimers in the next release. - fix Wvoid-pointer-to-enum-cast warnings - remove redundant of_match_ptr() - stop warning for invalid alarms when the alarm is disabled Drivers: - isl12022: allow setting the trip level for battery level detection - pcf2127: add support for PCF2131 and multiple timestamps - stm32: time precision improvement, many fixes - twl: NVRAM support" * tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits) dt-bindings: rtc: ds3231: Remove text binding rtc: wm8350: remove unnecessary messages rtc: twl: remove unnecessary messages rtc: sun6i: remove unnecessary message rtc: stop warning for invalid alarms when the alarm is disabled rtc: twl: add NVRAM support rtc: pcf85363: Allow to wake up system without IRQ rtc: m48t86: add DT support for m48t86 dt-bindings: rtc: Add ST M48T86 rtc: pcf2127: remove useless check rtc: rzn1: Report maximum alarm limit to rtc core rtc: ds1305: Report maximum alarm limit to rtc core rtc: tps6586x: Report maximum alarm limit to rtc core rtc: cmos: Report supported alarm limit to rtc infrastructure rtc: cros-ec: Detect and report supported alarm window size rtc: Add support for limited alarm timer offsets rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb() MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq() rtc: omap: Do not check for 0 return after calling platform_get_irq() ...
-
