- 20 Sep, 2022 40 commits
-
-
Vladimir Oltean authored
There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
Drivers could refuse to offload a LAG configuration for a variety of reasons, mainly having to do with its TX type. Additionally, since DSA masters may now also be LAG interfaces, and this will translate into a call to port_lag_join on the CPU ports, there may be extra restrictions there. Propagate the netlink extack to this DSA method in order for drivers to give a meaningful error message back to the user. Signed-off-by:
-
Vladimir Oltean authored
These don't work (print a harmless error about the operation failing) and make little sense to have anyway, because when a LAG DSA master goes away, we will introduce logic to move our CPU port back to the first physical DSA master. So suppress these device links in preparation for adding support for LAG DSA masters. Signed-off-by:
-
Vladimir Oltean authored
Similar to the discussion about tracking the admin/oper state of LAG DSA masters, we have the problem here that struct dsa_port *cpu_dp caches a single pair of orig_ethtool_ops and netdev_ops pointers. So if we call dsa_master_setup(bond0, cpu_dp) where cpu_dp is also the dev->dsa_ptr of one of the physical DSA masters, we'd effectively overwrite what we cached from that physical netdev with what replaced from the bonding interface. We don't need DSA ethtool stats on the bonding interface when used as DSA master, it's good enough to have them just on the physical DSA masters, so suppress this logic. Signed-off-by:
-
Vladimir Oltean authored
We store information about the DSA master's state in cpu_dp->master_admin_up and cpu_dp->master_oper_up, and this assumes a bijective association between a CPU port and a DSA master. However, when we have CPU ports in a LAG (and DSA masters in a LAG too), the way in which we set up things is that the physical DSA masters still have dev->dsa_ptr pointing to our cpu_dp, but the bonding/team device itself also has its dev->dsa_ptr pointing towards one of the CPU port structures (the first one). So logically speaking, that first cpu_dp can't keep track of both the physical master's admin/oper state, and of the bonding master's state. This isn't even needed; the reason why we keep track of the DSA master's state is to know when it is available for Ethernet-based register access. For that use case, we don't even need LAG; we just need to decide upon one of the physical DSA masters (if there is more than 1 available) and use that. This change suppresses dsa_tree_master_{admin,oper}_state_change() calls on LAG DSA masters (which will be supported in a future change), to allow the tracking of just physical DSA masters. Link: https://lore.kernel.org/netdev/628cc94d.1c69fb81.15b0d.422d@mx.google.com/Suggested-by:Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by:
-
Vladimir Oltean authored
There is a desire to support for DSA masters in a LAG. That configuration is intended to work by simply enslaving the master to a bonding/team device. But the physical DSA master (the LAG slave) still has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical CPU port. However, we would like to be able to retrieve the LAG that's the upper of the physical DSA master. In preparation for that, introduce a helper called dsa_port_get_master() that replaces all occurrences of the dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will be made later within the helper itself. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Some network drivers use __dev_mc_sync()/__dev_uc_sync() and therefore program the hardware only with addresses with a non-zero sync_cnt. Some of the above drivers also need to save/restore the address filtering lists when certain events happen, and they need to walk through the struct net_device :: uc and struct net_device :: mc lists. But these lists contain unsynced addresses too. To keep the appearance of an elementary form of data encapsulation, provide iterators through these lists that only look at entries with a non-zero sync_cnt, instead of filtering entries out from device drivers. Signed-off-by:
-
Paolo Abeni authored
Tony Nguyen says: ==================== ice: L2TPv3 offload support Wojciech Drewek says: Add support for dissecting L2TPv3 session id in flow dissector. Add support for this field in tc-flower and support offloading L2TPv3. Finally, add support for hardware offload of L2TPv3 packets based on session id in switchdev mode in ice driver. Example filter: # tc filter add dev $PF1 ingress prio 1 protocol ip \ flower \ ip_proto l2tp \ l2tpv3_sid 1234 \ skip_sw \ action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter in ice. COMMS DDP package contains profiles of more advanced protocols. Without COMMS DDP package hw offload will not work, however sw offload will still work. ==================== Link: https://lore.kernel.org/r/20220908171644.1282191-1-anthony.l.nguyen@intel.comSigned-off-by: -
Marcin Szycik authored
Add support for offloading packets based on L2TPv3 session id in switchdev mode. Example filter: tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \ l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to be able to specify l2tpv3_sid. ICE COMMS DDP package is required to create a filter as it contains L2TPv3 profiles. Reviewed-by:Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Wojciech Drewek authored
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3. Drivers can extract L2TPv3 specific fields from now on. Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
-
Wojciech Drewek authored
Add support for matching on L2TPv3 session ID. Session ID can be specified only when ip proto was set to IPPROTO_L2TP. Example filter: # tc filter add dev $PF1 ingress prio 1 protocol ip \ flower \ ip_proto l2tp \ l2tpv3_sid 1234 \ skip_sw \ action mirred egress redirect dev $VF1_PR Acked-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Wojciech Drewek authored
Allow to dissect L2TPv3 specific field which is: - session ID (32 bits) L2TPv3 might be transported over IP or over UDP, this implementation is only about L2TPv3 over IP. IP protocol carries L2TPv3 when ip_proto is IPPROTO_L2TP (115). Acked-by:
-
Wojciech Drewek authored
IPPROTO_L2TP is currently defined in l2tp.h, but most of ip protocols are defined in in.h file. Move it there in order to keep code clean. Acked-by:
-
Jules Irenge authored
coccinelle reports a warning WARNING: casting value returned by memory allocation function to (struct octep_rx_buffer *) is useless. To fix this the useless cast is removed. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/Yx+sr9o0uylXVcOl@playgroundSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Nathan Huckleberry authored
All usages of the vport_ops struct have the .send field set to dev_queue_xmit or internal_dev_recv. Since most usages are set to dev_queue_xmit, the function hook should match the signature of dev_queue_xmit. The only call to vport_ops->send() is in net/openvswitch/vport.c and it throws away the return value. This mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220913230739.228313-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of t7xx_ccmni_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ipc_wwan_link_transmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of korina_send_packet should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of liteeth_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20220912195307.812229-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of emac_dev_xmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of dm9000_start_xmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ax88796c_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Lukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20220912194031.808425-1-nhuck@google.comSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop unused headers in trace.h, by Sven Eckelmann - drop initialization of flexible ethtool_link_ksettings, by Sven Eckelmann - remove unused struct definitions, by Marek Lindner * tag 'batadv-next-pullrequest-20220916' of git://git.open-mesh.org/linux-merge: batman-adv: remove unused struct definitions batman-adv: Drop initialization of flexible ethtool_link_ksettings batman-adv: Drop unused headers in trace.h batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220916161454.1413154-1-sw@simonwunderlich.deSigned-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Adjust QOS tests for Spectrum-4 testing Amit writes: Quality Of Service tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run QOS tests there, some adjustments are required. Patch set overview: Patch #1 adjusts qos_ets_strict, qos_mc_aware and sch_ets tests. Patch #2 adjusts RED tests. Patch #3 extends devlink_lib to support querying maximum pool size. Patch #4 adds a test which can be used instead of qos_burst and do not assume that 1Gbps speed is supported. Patch #5 removes qos_burst test. ==================== Link: https://lore.kernel.org/r/cover.1663152826.git.petrm@nvidia.comSigned-off-by:
-
Amit Cohen authored
The previous patch added a test which can be used instead of qos_burst.sh. Remove this test. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Add an equivalent test to qos_burst, the test's purpose is same, but the new test uses simpler topology and does not require forcing low speed. In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea is to use a shaper in order to limit the traffic and create congestion. qos_burst test uses small pool, sends many small packets, and verify that packets are not dropped, which means that many descriptors can be handled. This test should check the change that commit c864769a ("mlxsw: Configure descriptor buffers") pushed. Instead, the new test tries to use more than 85% of maximum supported descriptors. The idea is to use big pool (as much as the ASIC supports), such that the pool size does not limit the traffic, then send many small packets, which means that many descriptors are used, and check how many packets the switch can handle. The usage of shaper allows to run the test in all ASICs, regardless of the CPU abilities, as it is able to create the congestion with low rate of packets. Signed-off-by:
-
Amit Cohen authored
The maximum pool size is exposed via 'devlink sb' command. The next patch will add a test which increases some pools to the maximum size. Add a function to query the value. Signed-off-by:
-
Amit Cohen authored
QOS tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported, otherwise, they will fail. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run the tests there, some adjustments are required. Use shapers to limit the traffic instead of forcing speed. Note that for several ports, the speed configuration is just for autoneg issues, so shaper is not needed instead. The tests already use ETS qdisc as a root and RED qdiscs as children. Add a new TBF shaper to limit the rate of traffic, and use it as a root qdisc, then save the previous hierarchy of qdiscs under the new TBF root. In some ASICs, the shapers do not limit the traffic as accurately as forcing speed. To make the tests stable, allow the backlog size to be up to +-10% of the threshold. The aim of the tests is to make sure that with backlog << threshold, there are no drops, and that packets are dropped somewhere in vicinity of the configured threshold. Signed-off-by:
-
Amit Cohen authored
QOS tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported, otherwise, they will fail. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run QOS tests there, some adjustments are required. Use shapers to limit the traffic instead of forcing speed. Note that for several ports, the speed configuration is just for autoneg issues, so shaper is not needed instead. In tests that already use shapers, set the existing shaper to be a child of a new TBF shaper which is added as a root qdisc and acts as a port shaper. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Remove label = "cpu" from DSA dt-bindings As explained in more detail in patch 1/3, label = "cpu" is not part of DSA's device tree bindings, yet we have some checks in the dt-schema for mt7530 which are written as if it was. Reformulate those checks, and remove all occurrences of this seemingly used, but actually unused, property from the binding examples. ==================== Link: https://lore.kernel.org/r/20220912175058.280386-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
This is not used by the DSA dt-binding, so remove it from all examples. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
The common dsa-port.yaml does this (and more) since commit 2ec2fb83 ("dt-bindings: net: dsa: make phylink bindings required for CPU/DSA ports"). Signed-off-by:
-
Vladimir Oltean authored
The fact that some DSA device trees use 'label = "cpu"' for the CPU port is nothing but blind cargo cult copying. The 'label' property was never part of the DSA DT bindings for anything except the user ports, where it provided a hint as to what name the created netdevs should use. DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), but this is only for non-OF code paths (platform data). The proper way to identify a CPU port is to look at whether the 'ethernet' phandle is present. Signed-off-by:
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220909091840.247946-1-xiujianfeng@huawei.comSigned-off-by:
-
Gaosheng Cui authored
rxrpc_max_call_lifetime has been removed since commit a158bdd3 ("rxrpc: Fix call timeouts"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220909064042.1149404-1-cuigaosheng1@huawei.comSigned-off-by:
-
Yang Yingliang authored
Use kmemdup() helper instead of open-coding to simplify the code when allocate dev_addr. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220914140100.3795545-2-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Add missing error code when mlx5e_macsec_fs_add_rule() or mlx5e_macsec_fs_init() fails. mlx5e_macsec_fs_init() don't return ERR_PTR(), so replace IS_ERR_OR_NULL() check with NULL pointer check. Fixes: e467b283 ("net/mlx5e: Add MACsec TX steering rules") Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Standardized ethtool counters for NXP ENETC This is another preparation patch for the introduction of MAC Merge Layer statistics, this time for the enetc driver (endpoint ports on the NXP LS1028A). The same set of stats groups is supported as in the case of the Felix DSA switch. ==================== Link: https://lore.kernel.org/r/20220909113800.55225-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Structure the code in such a way that it can be reused later for the pMAC statistics, by just changing the "mac" argument to 1. Usage: ethtool --include-statistics --show-pause eno2 ethtool -S eno0 --groups eth-mac ethtool -S eno0 --groups eth-ctrl ethtool -S eno0 --groups rmon Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
