If there in an error during a set_fmt, do not overwrite the previous
sizes with the invalid config.

Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and
causing the following OOPs

[   38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes)
[   38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0
[   38.663010] general protection fault: 0000 [#1] PREEMPT SMP

Cc: stable@vger.kernel.org
Fixes: 6d5f26f2 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix these kernel-doc warnings:

drivers/media/i2c/ccs/ccs-data.h:144: warning: expecting prototype for struct ccs_pdaf_pix_loc_block_desc. Prototype was for struct
ccs_pdaf_pix_loc_pixel_desc instead
drivers/media/i2c/ccs/ccs-quirk.h:51: warning: Function parameter or member 'post_streamoff' not described in 'ccs_quirk'
drivers/media/i2c/ccs/ccs-quirk.h:51: warning: Function parameter or member 'flags' not described in 'ccs_quirk'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When __v4l2_ctrl_modify_range() fails, no error return code of
imx274_s_frame_interval() is assigned.
To fix this bug, ret is assigned with the return valye of
__v4l2_ctrl_modify_range(), and then ret is checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The driver uses v4l2_get_link_freq() helper to obtain the link frequency
using the LINK_FREQ but also the PIXEL_RATE control. The divisor for the
pixel rate derived link frequency was wrong, missing the bus uses double
data rate. Fix this.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 4b6c129e ("media: ipu3-cio2: Use v4l2_get_link_freq helper")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix sub-device function for the pixel array and the scaler.

It seems that the pixel array had gotten assigned as SCALER whereas the
scaler had CAM_SENSOR function. Fix this by setting the pixel array
function to CAM_SENSOR and that of scaler to SCALER.

Fixes: 9ec2ac9b ("media: ccs: Give all subdevs a function")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

All Linux headers licensed under the GPL-2.0 must include a "WITH
Linux-syscall-note" extension in their SPDX license identifier, as
enforced by the scripts/headers_install.sh script. Fix the Intel IPU3
UAPI header currently stored with the driver in staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Eliminate the following coccicheck warning:
./drivers/media/i2c/ov02a10.c:703:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The r8a77965 (a.k.a. R-Car M3-N) device tree schema is
compatible with the already documented R-Car Gen3 devices.

Document r8a77965 support within renesas,drif.yaml.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The r8a77990 (a.k.a. R-Car E3) device tree schema is
compatible with R-Car H3 and M3-W schema.

Document r8a77990 support within renesas,drif.yaml.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Convert the Renesas DRIF bindings to DT schema and update
MAINTAINERS accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add Fabrizio castro and remove Ramesh Shanmugasundaram.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some devices reference an output terminal as the source of extension
units. This is incorrect, as output terminals only have an input pin,
and thus can't be connected to any entity in the forward direction. The
resulting topology would cause issues when registering the media
controller graph. To avoid this problem, connect the extension unit to
the source of the output terminal instead.

While at it, and while no device has been reported to be affected by
this issue, also handle forward scans where two output terminals would
be connected together, and skip the terminals found through such an
invalid connection.
Reported-and-tested-by: John Nealy <jnealy3@yahoo.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

An error message in the forward scan code incorrectly prints the ID of
the source entity instead of the XU entity being scanned. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The CSI-2 receiver requires both its sink pad and its source pad to be
connected through enabled links in order to be started. Ensure this by
setting the MEDIA_PAD_FL_MUST_CONNECT flag on both pads.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The .link_setup() handler uses state->lock to protect the src_sd field.
This is only used in mipi_csis_s_stream(), which can't race
.link_setup() as the MC core prevents link setup when the pipeline is
streaming. Drop the lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If the .s_stream() handler fails after calling pm_runtime_get_sync(),
call pm_runtime_put() in the error path.

While at it add a few blank lines to make the code more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Expand the description of the binding itself and of individual
properties to include additional information that may not be immediately
appartent from reading the reference manual. Drop the last sentence of
the phy-supply description that refers to the driver's implementation.

While at it, fix the capitalization of MIPI CSI-2 in the title.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

DT bindings examples are customarily indented with 4 spaces.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The fsl,csis-hs-settle property isn't used by the driver anymore. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The reset-names property is incorrect, as it references the reset of the
MIPI D-PHY master, which is used by the DSI controller. Fixing the
property name would create backward-compatibility issues. As the device
has a single reset, we can instead drop reset-names completely, which
also simplifies the binding.

Fix the example accordingly to use the correct reset.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The EDID had a few mistakes as reported by edid-decode:

Block 1, CTA-861 Extension Block:
  Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1.
  Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.

Fixed those.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If some error occurs, URB buffers should also be freed. If they aren't
freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB
buffers as dvb is set to NULL. The function in which error occurs should
do all the cleanup for the allocations it had done.

Tested the patch with the reproducer provided by syzbot. This patch
fixes the memleak.

Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/sillicon/silicon/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/cariers/carriers/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

change 'vodeo'     to 'video'
change 'nevery'    to 'never'
change 'is'        to 'it'
change 'connevted' to 'connected'
change 'swichers'  to 'switchers'
change 'strucure'  to 'structure'
change 'unblanced' to 'unbalanced'
change 'fonctionality' to 'functionality'
Signed-off-by: Xiaofeng Cao <caoxiaofeng@yulong.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The EDID failed with two edid-decode warnings:

Block 1, CTA-861 Extension Block:
  Video Data Block: VIC 16 is the preferred timing, overriding the first detailed timings. Is this intended?
  Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.

In addition, the first DTD had a wrong vsync value (6 instead of 5).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Trivial fixes for many kernel-doc warnings. Most of the comments before
enums or struct can just be that: regular comments.

So just change /** to /*.

In one remaining case it was just a wrong construct: @mem_dev[] -> @mem_dev
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently the header argument is being passed by value, so a copy of 256
byte structure on the stack is potentially occurring. Fix this by passing
by reference to avoid any large stack copies.

Addresses-Coverity: ("Big parameter passed by value")

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a description for enum values in hantro_enc_fmt,
in order to fix these warnings:

drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420P' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420SP' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUYV422' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_UYVY422' not described in enum 'hantro_enc_fmt'

While here, improve the kernel-doc style, adding an empty
line before the fields of the structs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In case of error, the function device_link_add() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix to return negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Modify the documentation to point out which flags and structs are
used to configure the statistics.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these kernel-doc warnings:

drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 've' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_count' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_mask' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'streaming' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buffers' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'pixfmt' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'src_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'sink_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'subdev_lock' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'events' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'streaming' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'wbclk' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'fimc_lite' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'clk_provider' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'subdev_notifier' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'pipelines' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'link_setup_graph' not described in 'fimc_md'
drivers/media/platform/exynos4-is/fimc-core.h:261: warning: Function parameter or member 'alpha' not described in 'fimc_frame'
drivers/media/platform/exynos4-is/fimc-core.h:321: warning: Function parameter or member 'streaming' not described in 'fimc_vid_cap'
drivers/media/platform/exynos4-is/fimc-core.h:429: warning: Function parameter or member 'drv_data' not described in 'fimc_dev'
drivers/media/platform/exynos4-is/fimc-core.h:495: warning: Function parameter or member 'in_order_1p' not described in 'fimc_ctx'
drivers/media/platform/exynos4-is/fimc-core.h:673: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:685: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_pop'
drivers/media/platform/exynos4-is/fimc-core.h:700: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:711: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_pop'
drivers/media/platform/exynos4-is/fimc-reg.h:333: warning: Function parameter or member 'dev' not described in 'fimc_hw_set_dma_seq'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these kernel-doc warnings:

drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_MIXER' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_FIMD' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Excess enum value 'GSC_LOCAL' description in 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'color' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'num_comp' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_min' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_align' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'in_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'out_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_up_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'poly_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pre_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'local_sc_down' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'clk_names' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'num_clocks' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'num_clocks' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'v4l2_dev' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'rotation' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'hflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'vflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'gsc_ctrls' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'out_colorspace' not described in 'gsc_ctx'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these warnings:

drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_ret' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_status' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'memplanes' not described in 's5p_jpeg_fmt'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'subsampling' not described in 's5p_jpeg_fmt'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these warnings:

drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'pix_limits' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'has_img_effect' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'vp_offset' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vdev' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vb_queue' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'offset' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_test_pattern' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx_cbcr' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cb' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cr' not described in 'camif_dev'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Give typo in kernel-doc documentation: hdr -> hrd

Fixes this warning:

drivers/media/platform/allegro-dvt/nal-h264.h:33: warning: expecting prototype for struct nal_h264_hdr_parameters. Prototype was for struct
nal_h264_hrd_parameters instead
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/Sysytem/System/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>