Add initialization of each PCIe port reading and initializing
data using device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We would like to update the maintainer email id's for wilc1000 driver.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Ganesh Krishna <ganesh.krishna@microchip.com>
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unmatched right bracket. Reported by uncrustify.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove two instances of a comparison to BOOL.
Reported by coccinelle.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra spaces before the tab character inside a comment section.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add extra spaces around the OR operator.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra blank lines to conform with coding style.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra space before a tab character.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove continuous multiple blank lines.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace SPDX License Identifier comments with C comments.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align arguments with the right side of the open left parentheses.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the SPDX identifier with standard C comment.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align parameters to the right side of the left parentheses
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Shorten pointer NULL check by simple truth test.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It needs an explicit LZ4 library dependency
if lz4 compression is enabled, found by kbuild randconfig.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 05f9d4a0 ("staging: erofs: use the new LZ4_decompress_safe_partial()")
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Heap statistics have been removed and currently even basics statistics
are missing.

This patch creates per heap debugfs directory /sys/kernel/debug/<heap_name>
and adds the following counters:
- the number of allocated buffers;
- the number of allocated bytes;
- the number of allocated bytes watermark.
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove multiple blank space complained by checkpatch
Signed-off-by: Irenge Jules Bashizi <jbi.octave@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change from if(format==NULL) to if(!format) to remove checkpatch warning
Signed-off-by: Irenge Jules Bashizi <jbi.octave@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces before and after text in comments.
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a comment that does not contain any text.
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Edit statements so that the line does not end with an assignment operator
or a parenthesis.
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat lines over 80 characters in prism2mib.c to resolve "line over
80 characters" warnings reported by checkpatch.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolve "line over 80 characters" warning reported by checkpatch by
splitting function header over 2 lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed sparse tool warnings due to missing convesion from
le16 to cpu endienness.
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since in nbu2ss_drv_probe() p_regs is assigned from mmio_base, which is
marked as __iomem, p_regs also should be market with __iomem.
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added static modifier to the udc_controller, since it's only
required within emxx_udc.c.
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the gpiod interface instead of the deprecated old non-descriptor
interface in olpc_dcon_xo_1.c.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the BCM2835 audio output is used, userspace sees a jitter up to 10ms
in the audio position, aka "delay" -- the number of frames that must
be output before a new frame would be played.
Make this a bit nicer for userspace by interpolating the position
using the CPU clock.
The overhead is small -- an extra ktime_get() every time a GPU message
is sent -- and another call and a few calculations whenever the delay
is sought from userland.
At 48,000 frames per second, i.e. approximately 20 microseconds per
frame, it would take a clock inaccuracy of
20 microseconds in 10 milliseconds -- 2,000 parts per million --
to result in an inaccurate estimate, whereas
crystal- or resonator-based clocks typically have an
inaccuracy of 10s to 100s of parts per million.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

handle_cfg_param() receives a bit map that describes what to be changed.
Some of these bits flags aren't referred to from elsewhere and can be
removed.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LZ4_decompress_safe_partial() can now decode exactly the nb of bytes
requested after the upstreamed commit 2209fda3 ("lib/lz4: update LZ4
decompressor module"), remove the erofs hacked lz4 decompression code.

A more cleaned compressor wrapper will be introduced in the subsequent
patches in order to prepare for supporting multiple compression algorithms.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The frame.flags & FLAG_B_FRAME is promoted to a long unsigned because
of the use of the BIT() macro when defining FLAG_B_FRAME and causing a
build warning. Fix this by using the %lu format specifer.

Cleans up warning:
drivers/staging/media/tegra-vde/tegra-vde.c:267:5: warning: format
specifies type 'int' but the argument has type 'unsigned long' [-Wformat]

Fixes: 42e764d0 ("staging: tegravde: replace bit assignment with macro")
Cc: Ioannis Valasakis <code@wizofe.uk>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro SET_RATE_ID is a definition in function
and undefined at end of function.
Make it as inline avoid the arg reuse for macro,
the name is changed in _rtl_rate_id, following the
same function pattern in the file.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling mistakes of "Calculate"
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ture->true
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ture->true
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `insn_write` handler for the AO subdevice (`labpc_ao_insn_write()`)
currently ignores `insn->n` (the number of samples to write) and assumes
a single sample is to be written.  But `insn->n` could be 0, meaning no
samples should be written, in which case `data[0]` is invalid.

Follow the usual Comedi guidelines and change `labpc_ao_insn_write()` to
write the specified number of samples.  This fixes the assumption that
`data[0]` is valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `insn_write` handler for the AO subdevice
(`cb_pcidda_ao_insn_write()`) currently ignores `insn->n` (the number of
samples to write) and assumes a single sample is to be written.  But
`insn->n` could be 0, meaning no samples should be written, in which
case `data[0]` is invalid.

Follow the usual Comedi guidelines and change
`cb_pcidda_ao_insn_write()` to write the specified number of samples.
This fixes the assumption that `data[0]` is valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `insn_read` handler for the EEPROM subdevice
(`apci3501_eeprom_insn_read()`) currently ignores `insn->n` (the number
of samples to be read) and assumes a single sample is to be read.  But
`insn->n` could be 0, meaning no samples should be read, in which case
`data[0]` ought not to be written.  (The comedi core at least ensures
that `data[0]` exists, but we should not rely on that.)

Following the usual Comedi guidelines and interpret `insn->n` as the
number of samples to be read, but only read the EEPROM location once and
make `insn->n` copies, as we don't expect the contents of the EEPROM
location to change between readings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The contents of the Comedi configuration instruction
`INSN_CONFIG_TIMER_1` instruction are not very well defined, but the one
driver that uses it (the "cb_pcidas64" driver for the PCI-DAS4020/12
card) assumes its `insn->n` is 5. Add a check in
`check_insn_config_length()` to verify that `insn->n` is correct for
this configuration instruction.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `insn_read` handler for the EEPROM subdevice (`eeprom_insn_read()`)
currently ignores `insn->n` (the number of samples to be read) and
assumes a single sample is to be read.  But `insn->n` could be 0,
meaning no samples should be read, in which case `data[0]` ought not to
be written.  (The comedi core at least ensures that `data[0]` exists,
but we should not rely on that.)

Follow the usual Comedi guidelines and interpret `insn->n` as the number
of samples to be read, but only read the EEPROM location once and make
`insn->n` copies, as we don't expect the contents of the EEPROM location
to change between readings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>