- 10 Nov, 2020 11 commits
-
-
Ching-Te Ku authored
To make sure the related ANT/RF_PARA setting will be expected result in COEX. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201109085909.9143-6-pkshih@realtek.com
-
Ching-Te Ku authored
Adjust space and comments, and fix "line over 80 characters" warnings reported by checkpatch. Signed-off-by:
-
Ching-Te Ku authored
Use macro definition to replace magic number. Signed-off-by:
-
Ching-Te Ku authored
Update COEX parameters and logic to enhance WL/BT performance while WL_Busy + A2DP in a less interference environment. It can avoid the interference comes cross from each other and earned more performance. Signed-off-by:
-
Ching-Te Ku authored
Some register definition and bit definition were incorrect. e.g. REG_BT_COEX_V2 should be word alignment to meet the coding style. e.g. set REG_BT_TDMA_TIME[5:0]=0x5, But the original is to set REG_BT_TDMA_TIME[7:0]=0x5. This will cause unexpected hardware behavior. Signed-off-by:
-
Wang Qing authored
workarould -> workaround Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Marek Vasut authored
The inner do { ... } while loop is completely useless, all it does is iterate over a switch-case statement, one bit at a time. This can easily be replaced by simple if (status & bit) { ... } tests for each bit. No functional change. Signed-off-by:Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Marek Vasut authored
The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that lock to be held." The RS911x interrupt handler does not fit that. This patch therefore changes it such that the entire IRQ handler is moved to the RX thread instead, and the interrupt handler only wakes the RX thread. This is OK, because the interrupt handler only does things which can also be done in the RX thread, that is, it checks for firmware loading error(s), it checks buffer status, it checks whether a packet arrived and if so, reads out the packet and passes it to network stack. Moreover, this change permits removal of a code which allocated an skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data into the skbuff, queue this skbuff into local private queue, then in RX thread, this buffer is dequeued, the data in the skbuff as passed to the RSI driver core, and the skbuff is deallocated. All this is replaced by directly calling the RSI driver core with local buffer. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Tsuchiya Yuto authored
If a reset is performed, but even the reset fails for some reasons (e.g., on Surface devices, the fw reset requires another quirks), cancel_work_sync() hangs in mwifiex_cleanup_pcie(). # firmware went into a bad state [...] [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0 [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed # reset performed after firmware went into a bad state [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active # but even the reset failed [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000 [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0 [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0 [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1 [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0 [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0 [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01 [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00 [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3 [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81 [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2 [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00 [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1 [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0 [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device # mwifiex_pcie_work hang happening [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds. [ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline #1 [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000 [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie] [ 1823.233965] Call Trace: [ 1823.233981] __schedule+0x292/0x820 [ 1823.233990] schedule+0x45/0xe0 [ 1823.233995] schedule_timeout+0x11c/0x160 [ 1823.234003] wait_for_completion+0x9e/0x100 [ 1823.234012] __flush_work.isra.0+0x156/0x210 [ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130 [ 1823.234026] __cancel_work_timer+0x11e/0x1a0 [ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie] [ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex] [ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex] [ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex] [ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie] [ 1823.234087] pci_try_reset_function+0x5c/0x90 [ 1823.234094] process_one_work+0x1d6/0x3a0 [ 1823.234100] worker_thread+0x4d/0x3d0 [ 1823.234107] ? rescuer_thread+0x410/0x410 [ 1823.234112] kthread+0x142/0x160 [ 1823.234117] ? __kthread_bind_mask+0x60/0x60 [ 1823.234124] ret_from_fork+0x22/0x30 [...] This is a deadlock caused by calling cancel_work_sync() in mwifiex_cleanup_pcie(): - Device resets are done via mwifiex_pcie_card_reset() - which schedules card->work to call mwifiex_pcie_card_reset_work() - which calls pci_try_reset_function(). - This leads to mwifiex_pcie_reset_done() be called on the same workqueue, which in turn calls - mwifiex_reinit_sw() and that calls - _mwifiex_fw_dpc(). The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter() in case firmware initialization fails. That ends up calling mwifiex_cleanup_pcie(). Note that all those calls are still running on the workqueue. So when mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting on itself to complete, causing a deadlock. This commit fixes the deadlock by skipping cancel_work_sync() on a reset failure path. After this commit, when reset fails, the following output is expected to be shown: kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device kernel: mwifiex: Failed to bring up adapter: -5 kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5 To reproduce this issue, for example, try putting the root port of wifi into D3 (replace "00:1d.3" with your setup). # put into D3 (root port) sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b Cc: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by:Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by:
-
Tsuchiya Yuto authored
The functions mwifiex_shutdown_sw() and mwifiex_reinit_sw() can be used for more general purposes than the PCIe function level reset. Also, these are even not PCIe-specific. So, let's update the comments at the top of each function accordingly. Signed-off-by:
-
Tsuchiya Yuto authored
When a PCIe function level reset (FLR) is performed but without fw reset for some reasons (e.g., on Microsoft Surface devices, fw reset requires other quirks), it fails to reset wifi properly. You can trigger the issue on such devices via debugfs entry for reset: $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset and the resulting dmesg log: [ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request [ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3 [ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID] [ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully [ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15 [ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [...] When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it lacks mwifiex_init_shutdown_fw(). This commit fixes mwifiex_shutdown_sw() by adding the missing mwifiex_init_shutdown_fw(). Fixes: 4c5dae59 ("mwifiex: add PCIe function level reset support") Signed-off-by:
-
- 07 Nov, 2020 29 commits
-
-
Seung-Woo Kim authored
There are missig brcmf_free() for brcmf_alloc(). Fix memory leak by adding missed brcmf_free(). Reported-by:
Jaehoon Chung <jh80.chung@samsung.com> Fixes: a1f5aac1 ("brcmfmac: don't realloc wiphy during PCIe reset") Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘_rtl8812ae_phy_get_txpower_limit’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2453:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘rtl8821ae_phy_switch_wirelessband’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:14: warning: variable ‘rxpath’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:6: warning: variable ‘txpath’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c: In function ‘_rtl8723be_query_rxphystatus’: drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c:53:6: warning: variable ‘cck_highpwr’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_bt_inquiry’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_wifi_idle_process’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2990:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_hid_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3277:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function ‘_rtl88e_phy_path_a_iqk’: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1351:33: warning: variable ‘reg_ea4’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c: In function ‘_rtl8723be_phy_lc_calibrate’: drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2181:36: warning: variable ‘lc_cal’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c: In function ‘btc8821a1ant_run_coexist_mechanism’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1904:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function ‘_rtl8723e_phy_iq_calibrate’: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1150:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_wifi_idle_process’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_sco’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2767:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2810:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2855:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2929:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2976:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3066:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_hid’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3121:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp_pan_edr’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3185:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3244:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum' Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Function parameter or member 'hw' not described in 'rtl92c_llt_write' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Excess function parameter 'io' description in 'rtl92c_llt_write' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Function parameter or member 'hw' not described in 'rtl92c_init_llt_table' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Excess function parameter 'io' description in 'rtl92c_init_llt_table' Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtw88/rtw8822c.c: In function ‘rtw8822c_dpk_dc_corr_check’: drivers/net/wireless/realtek/rtw88/rtw8822c.c:2445:5: warning: variable ‘corr_val’ set but not used [-Wunused-but-set-variable] Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'child' not described in 'wl12xx_spi_set_block_size' drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'blksz' not described in 'wl12xx_spi_set_block_size' drivers/net/wireless/ti/wlcore/spi.c:440: warning: Excess function parameter 'res' description in 'wlcore_probe_of' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Luciano Coelho <luciano.coelho@nokia.com> Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_pcie_remove’: drivers/net/wireless/marvell/mwifiex/pcie.c:432:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_cleanup_pcie’: drivers/net/wireless/marvell/mwifiex/pcie.c:3142:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/net/wireless/wl3501_cs.c:57: drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'reg_domain' not described in 'iw_valid_channel' drivers/net/wireless/wl3501_cs.c:143: warning: Excess function parameter 'reg_comain' description in 'iw_valid_channel' drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'data' not described in 'wl3501_send_pkt' drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'len' not described in 'wl3501_send_pkt' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Fox Chen <mhchen@golf.ccl.itri.org.tw> Cc: de Melo <acme@conectiva.com.br> Cc: Gustavo Niemeyer <niemeyer@conectiva.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): from drivers/net/wireless/intersil/prism54/isl_ioctl.c:22: inlined from ‘prism54_get_name’ at drivers/net/wireless/intersil/prism54/isl_ioctl.c:283:2: drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Function parameter or member 'priv' not described in 'prism54_mib_mode_helper' drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Excess function parameter 'mib' description in 'prism54_mib_mode_helper' drivers/net/wireless/intersil/prism54/isl_ioctl.c:127: warning: Function parameter or member 'priv' not described in 'prism54_mib_init' Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aurelien Alleaume <slts@free.fr> Cc: Valerio Riedel <hvr@gnu.org> Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Function parameter or member 'buf_len' not described in 'wl1251_cmd_test' drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Excess function parameter 'len' description in 'wl1251_cmd_test' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:394: warning: Function parameter or member 'gfp' not described in 'brcmf_fweh_process_event' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c:766: warning: Function parameter or member 'devinfo' not described in 'brcmf_pcie_bus_console_read' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw' drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format: * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Markov Mikhail authored
rt2800 only gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by:
Markov Mikhail <markov.mikhail@itmh.ru> sgruszka: remove unused variable Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Sebastian Andrzej Siewior authored
halbtc_send_bt_mp_operation() uses in_interrupt() to determine if it is safe to invoke wait_for_completion(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. halbtc_send_bt_mp_operation() is called from: rtl_watchdog_wq_callback() rtl_btc_periodical() halbtc_get() case BTC_GET_U4_BT_PATCH_VER: halbtc_get_bt_patch_version() which is preemtible context. rtl_c2h_content_parsing() btc_ops->btc_btinfo_notify() rtl_btc_btinfo_notify() exhalbtc_bt_info_notify() ex_btc8723b1ant_bt_info_notify() ex_btc8821a1ant_bt_info_notify() ex_btc8821a2ant_bt_info_notify() btcoexist->btc_set_bt_reg() halbtc_set_bt_reg() rtl_c2h_content_parsing() is in turn called from: rtl_c2hcmd_wq_callback() rtl_c2hcmd_launcher() which is preemptible context and from: _rtl_pci_rx_interrupt rtl_c2hcmd_enqueue() which is obviously not preemptible but limited to C2H_BT_MP commands which does invoke rtl_c2h_content_parsing(). Aside of that it can be reached from: halbtc_get() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() case BTC_GET_U4_BT_FORBIDDEN_SLOT_VAL: halbtc_get_bt_forbidden_slot_val() case BTC_GET_U4_BT_DEVICE_INFO: halbtc_get_bt_device_info() case BTC_GET_U4_SUPPORTED_VERSION: halbtc_get_bt_coex_supported_version() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() btcoexist->btc_get_bt_afh_map_from_bt() halbtc_get_bt_afh_map_from_bt() btcoexist->btc_get_ble_scan_para_from_bt() halbtc_get_ble_scan_para_from_bt() btcoexist->btc_get_ble_scan_type_from_bt() halbtc_get_ble_scan_type_from_bt() btcoexist->btc_get_ant_det_val_from_bt() halbtc_get_ant_det_val_from_bt() btcoexist->btc_get_bt_coex_supported_version() halbtc_get_bt_coex_supported_version() btcoexist->btc_get_bt_coex_supported_feature() halbtc_get_bt_coex_supported_feature() None of these have a caller. Welcome to the wonderful world of HALs and onion layers. Remove in_interrupt() check. Signed-off-by:Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
is_any_client_connect_to_ap() is using in_interrupt() to determine whether it should acquire the lock prior accessing the list. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The function is called from: - halbtc_get() - halbtc_get() halbtc_get_wifi_link_status() - halbtc_display_dbg_msg() halbtc_display_wifi_status() halbtc_get_wifi_link_status() All top level callers are part of the btc_coexist callback inferface and are never invoked from a context which can hold the lock already. The contexts which hold the lock are either protecting list add/del operations or list walks which never call into any of the btc_coexist interfaces. In fact the conditional is outright dangerous because if this function would be invoked from a BH disabled context the check would avoid taking the lock while on another CPU the list could be manipulated under the lock. Remove the in_interrupt() check and always acquire the lock. To simplify the code further use list_empty() instead of walking the list and counting the entries just to check the count for > 0 at the end. Signed-off-by: -
Sebastian Andrzej Siewior authored
The usage of in_atomic() in driver code is deprecated as it can not always detect all states where it is not allowed to sleep. All callers are in premptible thread context and all functions invoke core functions which have checks for invalid calling contexts already. Signed-off-by:
-
Sebastian Andrzej Siewior authored
hostap_get_wireless_stats() is the iw_handler_if::get_wireless_stats() callback of this driver. This callback was not allowed to sleep until commit a160ee69 ("wext: let get_wireless_stats() sleep") in v2.6.32. Remove the therefore pointless in_atomic() check. Signed-off-by:
-
Sebastian Andrzej Siewior authored
issuecommand() is using in_atomic() to decide if it is safe to invoke schedule() while waiting for the command to be accepted. Usage of in_atomic() for this is only half correct as it can not detect all condition where it is not allowed to schedule(). Also Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. Add an may_sleep argument to issuecommand() indicating when it is save to sleep and change schedule() to cond_resched() because it's pointless to invoke schedule() if there is no request to reschedule. Pass the may_sleep condition through the various call chains leading to issuecommand(). Signed-off-by:
-
