With the help from bpfptr_t prepare relevant bpf syscall commands
to be used from kernel and user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-4-alexei.starovoitov@gmail.com

Similar to sockptr_t introduce bpfptr_t with few additions:
make_bpfptr() creates new user/kernel pointer in the same address space as
existing user/kernel pointer.
bpfptr_add() advances the user/kernel pointer.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-3-alexei.starovoitov@gmail.com

Add placeholders for bpf_sys_bpf() helper and new program type.
Make sure to check that expected_attach_type is zero for future extensibility.
Allow tracing helper functions to be used in this program type, since they will
only execute from user context via bpf_prog_test_run.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-2-alexei.starovoitov@gmail.com

In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.

bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.

tcp_gso_segment():
        [...]
        mss = skb_shinfo(skb)->gso_size;
        if (unlikely(skb->len <= mss))
                goto out;
        [...]

Allow to upgrade/downgrade MSS only when BPF_F_ADJ_ROOM_FIXED_GSO is
not set.
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/1620804453-57566-1-git-send-email-dseok.yi@samsung.com

'err' and 'flags' are not used, we can just get rid of them.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210517022348.50555-1-xiyou.wangcong@gmail.com

After commit 96a71005 ("bpf, arm64: remove obsolete exception handling
from div/mod"), there is no need to check twice about BPF_DIV and BPF_MOD,
remove the redundant switch case.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1621328170-17583-1-git-send-email-yangtiezhu@loongson.cn

This adds some basic tests for the low level bpf_tc_* API.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-4-memxor@gmail.com

This adds functions that wrap the netlink API used for adding, manipulating,
and removing traffic control filters.

The API summary:

A bpf_tc_hook represents a location where a TC-BPF filter can be attached.
This means that creating a hook leads to creation of the backing qdisc,
while destruction either removes all filters attached to a hook, or destroys
qdisc if requested explicitly (as discussed below).

The TC-BPF API functions operate on this bpf_tc_hook to attach, replace,
query, and detach tc filters. All functions return 0 on success, and a
negative error code on failure.

bpf_tc_hook_create - Create a hook
Parameters:
	@hook - Cannot be NULL, ifindex > 0, attach_point must be set to
		proper enum constant. Note that parent must be unset when
		attach_point is one of BPF_TC_INGRESS or BPF_TC_EGRESS. Note
		that as an exception BPF_TC_INGRESS|BPF_TC_EGRESS is also a
		valid value for attach_point.

		Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.

bpf_tc_hook_destroy - Destroy a hook
Parameters:
	@hook - Cannot be NULL. The behaviour depends on value of
		attach_point. If BPF_TC_INGRESS, all filters attached to
		the ingress hook will be detached. If BPF_TC_EGRESS, all
		filters attached to the egress hook will be detached. If
		BPF_TC_INGRESS|BPF_TC_EGRESS, the clsact qdisc will be
		deleted, also detaching all filters. As before, parent must
		be unset for these attach_points, and set for BPF_TC_CUSTOM.

		It is advised that if the qdisc is operated on by many programs,
		then the program at least check that there are no other existing
		filters before deleting the clsact qdisc. An example is shown
		below:

		DECLARE_LIBBPF_OPTS(bpf_tc_hook, .ifindex = if_nametoindex("lo"),
				    .attach_point = BPF_TC_INGRESS);
		/* set opts as NULL, as we're not really interested in
		 * getting any info for a particular filter, but just
	 	 * detecting its presence.
		 */
		r = bpf_tc_query(&hook, NULL);
		if (r == -ENOENT) {
			/* no filters */
			hook.attach_point = BPF_TC_INGRESS|BPF_TC_EGREESS;
			return bpf_tc_hook_destroy(&hook);
		} else {
			/* failed or r == 0, the latter means filters do exist */
			return r;
		}

		Note that there is a small race between checking for no
		filters and deleting the qdisc. This is currently unavoidable.

		Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.

bpf_tc_attach - Attach a filter to a hook
Parameters:
	@hook - Cannot be NULL. Represents the hook the filter will be
		attached to. Requirements for ifindex and attach_point are
		same as described in bpf_tc_hook_create, but BPF_TC_CUSTOM
		is also supported.  In that case, parent must be set to the
		handle where the filter will be attached (using BPF_TC_PARENT).
		E.g. to set parent to 1:16 like in tc command line, the
		equivalent would be BPF_TC_PARENT(1, 16).

	@opts - Cannot be NULL. The following opts are optional:
		* handle   - The handle of the filter
		* priority - The priority of the filter
			     Must be >= 0 and <= UINT16_MAX
		Note that when left unset, they will be auto-allocated by
		the kernel. The following opts must be set:
		* prog_fd - The fd of the loaded SCHED_CLS prog
		The following opts must be unset:
		* prog_id - The ID of the BPF prog
		The following opts are optional:
		* flags - Currently only BPF_TC_F_REPLACE is allowed. It
			  allows replacing an existing filter instead of
			  failing with -EEXIST.
		The following opts will be filled by bpf_tc_attach on a
		successful attach operation if they are unset:
		* handle   - The handle of the attached filter
		* priority - The priority of the attached filter
		* prog_id  - The ID of the attached SCHED_CLS prog
		This way, the user can know what the auto allocated values
		for optional opts like handle and priority are for the newly
		attached filter, if they were unset.

		Note that some other attributes are set to fixed default
		values listed below (this holds for all bpf_tc_* APIs):
		protocol as ETH_P_ALL, direct action mode, chain index of 0,
		and class ID of 0 (this can be set by writing to the
		skb->tc_classid field from the BPF program).

bpf_tc_detach
Parameters:
	@hook - Cannot be NULL. Represents the hook the filter will be
		detached from. Requirements are same as described above
		in bpf_tc_attach.

	@opts - Cannot be NULL. The following opts must be set:
		* handle, priority
		The following opts must be unset:
		* prog_fd, prog_id, flags

bpf_tc_query
Parameters:
	@hook - Cannot be NULL. Represents the hook where the filter lookup will
		be performed. Requirements are same as described above in
		bpf_tc_attach().

	@opts - Cannot be NULL. The following opts must be set:
		* handle, priority
		The following opts must be unset:
		* prog_fd, prog_id, flags
		The following fields will be filled by bpf_tc_query upon a
		successful lookup:
		* prog_id

Some usage examples (using BPF skeleton infrastructure):

BPF program (test_tc_bpf.c):

	#include <linux/bpf.h>
	#include <bpf/bpf_helpers.h>

	SEC("classifier")
	int cls(struct __sk_buff *skb)
	{
		return 0;
	}

Userspace loader:

	struct test_tc_bpf *skel = NULL;
	int fd, r;

	skel = test_tc_bpf__open_and_load();
	if (!skel)
		return -ENOMEM;

	fd = bpf_program__fd(skel->progs.cls);

	DECLARE_LIBBPF_OPTS(bpf_tc_hook, hook, .ifindex =
			    if_nametoindex("lo"), .attach_point =
			    BPF_TC_INGRESS);
	/* Create clsact qdisc */
	r = bpf_tc_hook_create(&hook);
	if (r < 0)
		goto end;

	DECLARE_LIBBPF_OPTS(bpf_tc_opts, opts, .prog_fd = fd);
	r = bpf_tc_attach(&hook, &opts);
	if (r < 0)
		goto end;
	/* Print the auto allocated handle and priority */
	printf("Handle=%u", opts.handle);
	printf("Priority=%u", opts.priority);

	opts.prog_fd = opts.prog_id = 0;
	bpf_tc_detach(&hook, &opts);
end:
	test_tc_bpf__destroy(skel);

This is equivalent to doing the following using tc command line:
  # tc qdisc add dev lo clsact
  # tc filter add dev lo ingress bpf obj foo.o sec classifier da
  # tc filter del dev lo ingress handle <h> prio <p> bpf
... where the handle and priority can be found using:
  # tc filter show dev lo ingress

Another example replacing a filter (extending prior example):

	/* We can also choose both (or one), let's try replacing an
	 * existing filter.
	 */
	DECLARE_LIBBPF_OPTS(bpf_tc_opts, replace_opts, .handle =
			    opts.handle, .priority = opts.priority,
			    .prog_fd = fd);
	r = bpf_tc_attach(&hook, &replace_opts);
	if (r == -EEXIST) {
		/* Expected, now use BPF_TC_F_REPLACE to replace it */
		replace_opts.flags = BPF_TC_F_REPLACE;
		return bpf_tc_attach(&hook, &replace_opts);
	} else if (r < 0) {
		return r;
	}
	/* There must be no existing filter with these
	 * attributes, so cleanup and return an error.
	 */
	replace_opts.prog_fd = replace_opts.prog_id = 0;
	bpf_tc_detach(&hook, &replace_opts);
	return -1;

To obtain info of a particular filter:

	/* Find info for filter with handle 1 and priority 50 */
	DECLARE_LIBBPF_OPTS(bpf_tc_opts, info_opts, .handle = 1,
			    .priority = 50);
	r = bpf_tc_query(&hook, &info_opts);
	if (r == -ENOENT)
		printf("Filter not found");
	else if (r < 0)
		return r;
	printf("Prog ID: %u", info_opts.prog_id);
	return 0;
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> # libbpf API design
[ Daniel: also did major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-3-memxor@gmail.com

This change introduces a few helpers to wrap open coded attribute
preparation in netlink.c. It also adds a libbpf_netlink_send_recv() that
is useful to wrap send + recv handling in a generic way. Subsequent patch
will also use this function for sending and receiving a netlink response.
The libbpf_nl_get_link() helper has been removed instead, moving socket
creation into the newly named libbpf_netlink_send_recv().

Every nested attribute's closure must happen using the helper
nlattr_end_nested(), which sets its length properly. NLA_F_NESTED is
enforced using nlattr_begin_nested() helper. Other simple attributes
can be added directly.

The maxsz parameter corresponds to the size of the request structure
which is being filled in, so for instance with req being:

  struct {
	struct nlmsghdr nh;
	struct tcmsg t;
	char buf[4096];
  } req;

Then, maxsz should be sizeof(req).

This change also converts the open coded attribute preparation with these
helpers. Note that the only failure the internal call to nlattr_add()
could result in the nested helper would be -EMSGSIZE, hence that is what
we return to our caller.

The libbpf_netlink_send_recv() call takes care of opening the socket,
sending the netlink message, receiving the response, potentially invoking
callbacks, and return errors if any, and then finally close the socket.
This allows users to avoid identical socket setup code in different places.
The only user of libbpf_nl_get_link() has been converted to make use of it.
__bpf_set_link_xdp_fd_replace() has also been refactored to use it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
[ Daniel: major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-2-memxor@gmail.com

Detect use of static entry-point BPF programs (those with SEC() markings) and
emit error message. This is similar to
c1cccec9 ("libbpf: Reject static maps") but for BPF programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210514195534.1440970-1-andrii@kernel.org

Static maps never really worked with libbpf, because all such maps were always
silently resolved to the very first map. Detect static maps (both legacy and
BTF-defined) and report user-friendly error.

Tested locally by switching few maps (legacy and BTF-defined) in selftests to
static ones and verifying that now libbpf rejects them loudly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-2-andrii@kernel.org

Adjust static_linked selftests to test a mix of global and static variables
and their handling of bpftool's skeleton generation code.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-1-andrii@kernel.org

Use the common function round_up() directly to show the align size
explicitly, the function STACK_ALIGN() is needless, remove it. Other
JITs also just rely on round_up().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1620651119-5663-1-git-send-email-yangtiezhu@loongson.cn

While cross compiling on ARM32 , the casting from pointer to __u64 will
cause warnings:

samples/bpf/task_fd_query_user.c: In function 'main':
samples/bpf/task_fd_query_user.c:399:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
399 | uprobe_file_offset = (__u64)main - (__u64)&__executable_start;
| ^
samples/bpf/task_fd_query_user.c:399:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
399 | uprobe_file_offset = (__u64)main - (__u64)&__executable_start;

Workaround this by using "unsigned long" to adapt to different ARCHs.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210511140429.89426-1-liuhailongg6@163.com

Do the same global -> static BTF update for global functions with STV_INTERNAL
visibility to turn on static BPF verification mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-7-andrii@kernel.org

Fix silly bug in updating ELF symbol's visibility.

Fixes: a4634922 ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-6-andrii@kernel.org

As discussed in [0], stop emitting static variables in BPF skeletons to avoid
issues with name-conflicting static variables across multiple
statically-linked BPF object files.

Users using static variables to pass data between BPF programs and user-space
should do a trivial one-time switch according to the following simple rules:
  - read-only `static volatile const` variables should be converted to
    `volatile const`;
  - read/write `static volatile` variables should just drop `static volatile`
    modifiers to become global variables/symbols. To better handle older Clang
    versions, such newly converted global variables should be explicitly
    initialized with a specific value or `= 0`/`= {}`, whichever is
    appropriate.

  [0] https://lore.kernel.org/bpf/CAEf4BzZo7_r-hsNvJt3w3kyrmmBJj7ghGY8+k4nvKF0KLjma=w@mail.gmail.com/T/#m664d4b0d6b31ac8b2669360e0fc2d6962e9f5ec1Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-5-andrii@kernel.org

In preparation of skipping emitting static variables in BPF skeletons, switch
all current selftests uses of static variables to pass data between BPF and
user-space to use global variables.

All non-read-only `static volatile` variables become just plain global
variables by dropping `static volatile` part.

Read-only `static volatile const` variables, though, still require `volatile`
modifier, otherwise compiler will ignore whatever values are set from
user-space.

Few static linker tests are using name-conflicting static variables to
validate that static linker still properly handles static variables and
doesn't trip up on name conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-4-andrii@kernel.org

For better future extensibility add per-file linker options. Currently
the set of available options is empty. This changes bpf_linker__add_file()
API, but it's not a breaking change as bpf_linker APIs hasn't been released
yet.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-3-andrii@kernel.org

Similarly to .rodata, strip any const/volatile/restrict modifiers when
generating BPF skeleton. They are not helpful and actually just get in the way.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210507054119.270888-2-andrii@kernel.org

Lorenz Bauer says:

====================

github.com/cilium/ebpf runs integration tests with libbpf in a vm on CI.
I recently did some work to increase the code coverage from that, and
started experiencing OOM-kills in the VM. That led me down a rabbit
hole looking at verifier memory allocation patterns. I didn't figure out
what triggered the OOM-kills but refactored some often called memory
allocation code.

The key insight is that often times we don't need to do a full kfree /
kmalloc, but can instead just reallocate. The first patch adds two helpers
which do just that for the use cases in the verifier, which are sufficiently
different that they can't use stock krealloc_array and friends.

The series makes bpf_verif_scale about 10% faster in my VM set up, which
is especially noticeable when running with KASAN enabled.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

func_states_equal makes a very short lived allocation for idmap,
probably because it's too large to fit on the stack. However the
function is called quite often, leading to a lot of alloc / free
churn. Replace the temporary allocation with dedicated scratch
space in struct bpf_verifier_env.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/20210429134656.122225-4-lmb@cloudflare.com

Eliminate a couple needless kfree / kmalloc cycles by using
copy_array for jmp_history.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429134656.122225-3-lmb@cloudflare.com

Resizing and copying stack and reference tracking state currently
does a lot of kfree / kmalloc when the size of the tracked set changes.
The logic in copy_*_state and realloc_*_state is also hard to follow.

Refactor this into two core functions. copy_array copies from a source
into a destination. It avoids reallocation by taking the allocated
size of the destination into account via ksize(). The function is
essentially krealloc_array, with the difference that the contents of
dst are not preserved. realloc_array changes the size of an array and
zeroes newly allocated items. Contrary to krealloc both functions don't
free the destination if the size is zero. Instead we rely on free_func_state
to clean up.

realloc_stack_state is renamed to grow_stack_state to better convey
that it never shrinks the stack state.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429134656.122225-2-lmb@cloudflare.com

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid over-allocating the kernel's mapping on !MMU systems,
   which could lead to up to 2MiB of lost memory

 - The SiFive address extension errata only manifest on rv64, they are
   now disabled on rv32 where they are unnecessary

 - A pair of late-landing cleanups

* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused handle_exception symbol
  riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
  riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
  riscv: Only extend kernel reservation if mapped read-only

intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().

End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer.  gcc-11 correctly warns
about this case:

  drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
   3491 |                     !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
  In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
  include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
   1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
        |      ^~~~~~~~~~~~~~~~~~~~
       6:14 elapsed

This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.

There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes in various drivers (qla2xxx, ufs,
  scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
  driver to remove the open coded iteration functions in favour of the
  scsi provided ones"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Use scsi_host_busy_iter() to traverse commands
  scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
  scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
  scsi: ufs: core: Narrow down fast path in system suspend path
  scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
  scsi: ufs: core: Do not put UFS power into LPM if link is broken
  scsi: qla2xxx: Prevent PRLI in target mode
  scsi: qla2xxx: Add marginal path handling support
  scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
  scsi: ufs: core: Fix a typo in ufs-sysfs.c
  scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
  scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
  scsi: lpfc: Fix illegal memory access on Abort IOCBs
  scsi: blk-mq: Fix build warning when making htmldocs

Pull more Kbuild updates from Masahiro Yamada:

 - Convert sh and sparc to use generic shell scripts to generate the
   syscall headers

 - refactor .gitignore files

 - Update kernel/config_data.gz only when the content of the .config
   is really changed, which avoids the unneeded re-link of vmlinux

 - move "remove stale files" workarounds to scripts/remove-stale-files

 - suppress unused-but-set-variable warnings by default for Clang
   as well

 - fix locale setting LANG=C to LC_ALL=C

 - improve 'make distclean'

 - always keep intermediate objects from scripts/link-vmlinux.sh

 - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained

 - misc cleanups

* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
  kbuild: Don't remove link-vmlinux temporary files on exit/signal
  kbuild: remove the unneeded comments for external module builds
  kbuild: make distclean remove tag files in sub-directories
  kbuild: make distclean work against $(objtree) instead of $(srctree)
  kbuild: refactor modname-multi by using suffix-search
  kbuild: refactor fdtoverlay rule
  kbuild: parameterize the .o part of suffix-search
  arch: use cross_compiling to check whether it is a cross build or not
  kbuild: remove ARCH=sh64 support from top Makefile
  .gitignore: prefix local generated files with a slash
  kbuild: replace LANG=C with LC_ALL=C
  Makefile: Move -Wno-unused-but-set-variable out of GCC only block
  kbuild: add a script to remove stale generated files
  kbuild: update config_data.gz only when the content of .config is changed
  .gitignore: ignore only top-level modules.builtin
  .gitignore: move tags and TAGS close to other tag files
  kernel/.gitgnore: remove stale timeconst.h and hz.bc
  usr/include: refactor .gitignore
  genksyms: fix stale comment
  ...

Pull powerpc updates and fixes from Michael Ellerman:
 "A bit of a mixture of things, tying up some loose ends.

  There's the removal of the nvlink code, which dependend on a commit in
  the vfio tree. Then the enablement of huge vmalloc which was in next
  for a few weeks but got dropped due to conflicts. And there's also a
  few fixes.

  Summary:

   - Remove the nvlink support now that it's only user has been removed.

   - Enable huge vmalloc mappings for Radix MMU (P9).

   - Fix KVM conversion to gfn-based MMU notifier callbacks.

   - Fix a kexec/kdump crash with hot plugged CPUs.

   - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.

   - Restore alphabetic order of the selects under CONFIG_PPC.

  Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
  Sandipan Das, and Sourabh Jain"

* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
  powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
  powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
  powerpc/powernv/memtrace: Fix dcache flushing
  powerpc/kexec_file: Use current CPU info while setting up FDT
  powerpc/64s/radix: Enable huge vmalloc mappings
  powerpc/powernv: remove the nvlink support

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc1, including fixes from bpf, can and
  netfilter trees. Self-contained fixes, nothing risky.

  Current release - new code bugs:

   - dsa: ksz: fix a few bugs found by static-checker in the new driver

   - stmmac: fix frame preemption handshake not triggering after
     interface restart

  Previous releases - regressions:

   - make nla_strcmp handle more then one trailing null character

   - fix stack OOB reads while fragmenting IPv4 packets in openvswitch
     and net/sched

   - sctp: do asoc update earlier in sctp_sf_do_dupcook_a

   - sctp: delay auto_asconf init until binding the first addr

   - stmmac: clear receive all(RA) bit when promiscuous mode is off

   - can: mcp251x: fix resume from sleep before interface was brought up

  Previous releases - always broken:

   - bpf: fix leakage of uninitialized bpf stack under speculation

   - bpf: fix masking negation logic upon negative dst register

   - netfilter: don't assume that skb_header_pointer() will never fail

   - only allow init netns to set default tcp cong to a restricted algo

   - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
     false positive errors

   - ethtool: fix missing NLM_F_MULTI flag when dumping

   - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition

   - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b

   - bridge: fix NULL-deref caused by a races between assigning
     rx_handler_data and setting the IFF_BRIDGE_PORT bit

  Latecomer:

   - seg6: add counters support for SRv6 Behaviors"

* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  atm: firestream: Use fallthrough pseudo-keyword
  net: stmmac: Do not enable RX FIFO overflow interrupts
  mptcp: fix splat when closing unaccepted socket
  i40e: Remove LLDP frame filters
  i40e: Fix PHY type identifiers for 2.5G and 5G adapters
  i40e: fix the restart auto-negotiation after FEC modified
  i40e: Fix use-after-free in i40e_client_subtask()
  i40e: fix broken XDP support
  netfilter: nftables: avoid potential overflows on 32bit arches
  netfilter: nftables: avoid overflows in nft_hash_buckets()
  tcp: Specify cmsgbuf is user pointer for receive zerocopy.
  mlxsw: spectrum_mr: Update egress RIF list before route's action
  net: ipa: fix inter-EE IRQ register definitions
  can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
  can: mcp251x: fix resume from sleep before interface was brought up
  can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
  can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
  netfilter: nftables: Fix a memleak from userdata error path in new objects
  netfilter: remove BUG_ON() after skb_header_pointer()
  netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
  ...

<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.

IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.

Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.

Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>

Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Add SECMARK revision 1 to fix incorrect layout that prevents
   from remove rule with this target, from Phil Sutter.

2) Fix pernet exit path spat in arptables, from Florian Westphal.

3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
   reported by syzbot, from Eric Dumazet.

4) Missing check for skb_header_pointer() NULL pointer in
   nfnetlink_osf.

5) Remove BUG_ON() after skb_header_pointer() from packet path
   in several conntrack helper and the TCP tracker.

6) Fix memleak in the new object error path of userdata.

7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
   also from Eric.

8) Avoid overflows in 32bit arches, from Eric.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables: avoid potential overflows on 32bit arches
  netfilter: nftables: avoid overflows in nft_hash_buckets()
  netfilter: nftables: Fix a memleak from userdata error path in new objects
  netfilter: remove BUG_ON() after skb_header_pointer()
  netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
  netfilter: nfnetlink: add a missing rcu_read_unlock()
  netfilter: arptables: use pernet ops struct during unregister
  netfilter: xt_SECMARK: add new revision to fix structure layout
====================

Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Nguyen, Anthony L says:

====================
Intel Wired LAN Driver Updates 2021-05-07

This series contains updates to i40e driver only.

Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.

Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.

Jaroslaw forces link reset when changing FEC so that changes take
affect.

Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.

Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Remove LLDP frame filters
  i40e: Fix PHY type identifiers for 2.5G and 5G adapters
  i40e: fix the restart auto-negotiation after FEC modified
  i40e: Fix use-after-free in i40e_client_subtask()
  i40e: fix broken XDP support
====================

Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add pseudo-keyword macro fallthrough[1]

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.

stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:

   Attempt to release TCP socket in state 8

This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.

The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state.  This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.

Fixes: 3721b9b6 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros_ec_typec:

   - Changes around DP mode check, hard reset, tracking port change.

  cros_ec misc:

   - wilco_ec: Convert stream-like files from nonseekable to stream open

   - cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event

   - fix format warning in cros_ec_typec"

* tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock
  platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event
  platform/chrome: cros_ec_typec: Add DP mode check
  platform/chrome: cros_ec_typec: Handle hard reset
  platform/chrome: cros_ec: Add Type C hard reset
  platform/chrome: cros_ec_typec: Track port role
  platform/chrome: cros_ec_typec: fix clang -Wformat warning
  platform/chrome: cros_ec_typec: Check for device within remove function
  platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open

Pull i3cupdates from Alexandre Belloni:
 "Fix i3c_master_register error path"

* tag 'i3c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
  dt-bindings: i3c: Fix silvaco,i3c-master-v1 compatible string
  i3c: master: svc: remove redundant assignment to cmd->read_len

Pull more arm64 updates from Catalin Marinas:
 "A mix of fixes and clean-ups that turned up too late for the first
  pull request:

   - Restore terminal stack frame records. Their previous removal caused
     traces which cross secondary_start_kernel to terminate one entry
     too late, with a spurious "0" entry.

   - Fix boot warning with pseudo-NMI due to the way we manipulate the
     PMR register.

   - ACPI fixes: avoid corruption of interrupt mappings on watchdog
     probe failure (GTDT), prevent unregistering of GIC SGIs.

   - Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
     having to test all the other combinations.

   - Documentation fixes and updates: tagged address ABI exceptions on
     brk/mmap/mremap(), event stream frequency, update booting
     requirements on the configuration of traps"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kernel: Update the stale comment
  arm64: Fix the documented event stream frequency
  arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
  arm64: Explicitly document boot requirements for SVE
  arm64: Explicitly require that FPSIMD instructions do not trap
  arm64: Relax booting requirements for configuration of traps
  arm64: cpufeatures: use min and max
  arm64: stacktrace: restore terminal records
  arm64/vdso: Discard .note.gnu.property sections in vDSO
  arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
  psci: Remove unneeded semicolon
  ACPI: irq: Prevent unregistering of GIC SGIs
  ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  arm64: Show three registers per line
  arm64: remove HAVE_DEBUG_BUGVERBOSE
  arm64: alternative: simplify passing alt_region
  arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
  arm64: vdso32: drop -no-integrated-as flag