- 17 Mar, 2021 2 commits
-
-
wenxu authored
The ct_state validate should not only check the mask bit and also check mask_bit & key_bit.. For the +new+est case example, The 'new' and 'est' bits should be set in both state_mask and state flags. Or the -new-est case also will be reject by kernel. When Openvswitch with two flows ct_state=+trk+new,action=commit,forward ct_state=+trk+est,action=forward A packet go through the kernel and the contrack state is invalid, The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the finally dp action will be drop with -new-est+trk. Fixes: 1bcc51ac ("net/sched: cls_flower: Reject invalid ct_state flags rules") Fixes: 3aed8b63 ("net/sched: cls_flower: validate ct_state for invalid and reply flags") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
We were linearizing non-TSO skbs that had too many frags, but we weren't checking number of frags on TSO skbs. This could lead to a bad page reference when we received a TSO skb with more frags than the Tx descriptor could support. v2: use gso_segs rather than yet another division don't rework the check on the nr_frags Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2021 21 commits
-
-
Geoff Levand authored
Change the Spidernet network driver from supported to maintained, add the linuxppc-dev ML, and add myself as a 'maintainer'. Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== Fixes for nfp pre_tunnel code Louis Peens says: The following set of patches fixes up a few bugs in the pre_tun decap code paths which has been hiding for a while. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
pre_tun_rule flows does not follow the usual add-flow path, instead they are used to update the pre_tun table on the firmware. This means that if the mask-id gets allocated here the firmware will never see the "NFP_FL_META_FLAG_MANAGE_MASK" flag for the specific mask id, which triggers the allocation on the firmware side. This leads to the firmware mask being corrupted and causing all sorts of strange behaviour. Fixes: f12725d9 ("nfp: flower: offload pre-tunnel rules") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
Differentiate between ipv4 and ipv6 flows when configuring the pre_tunnel table to prevent them trampling each other in the table. Fixes: 78346160 ("nfp: flower: update flow merge code to support IPv6 tunnels") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
There are some pre_tunnel flows combinations which are incorrectly being offloaded without proper support, fix these. - Matching on MPLS is not supported for pre_tun. - Match on IPv4/IPv6 layer must be present. - Destination MAC address must match pre_tun.dev MAC Fixes: 120ffd84 ("nfp: flower: verify pre-tunnel rules") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Merely enabling compile-testing should not enable additional code. To fix this, restrict the automatic enabling of BCM4908_ENET to ARCH_BCM4908. Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
wenxu authored
When openvswitch conntrack offload with act_ct action. The first rule do conntrack in the act_ct in tc subsystem. And miss the next rule in the tc and fallback to the ovs datapath but miss set post_ct flag which will lead the ct_state_key with -trk flag. Fixes: 7baf2429 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.12-20210316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-03-16 this is a pull request of 11 patches for net/master. The first patch is by Martin Willi and fixes the deletion of network name spaces with physical CAN interfaces in them. The next two patches are by me an fix the ISOTP protocol, to ensure that unused flags in classical CAN frames are properly initialized to zero. Stephane Grosjean contributes a patch for the pcan_usb_fd driver, which add MODULE_SUPPORTED_DEVICE lines for two supported devices. Angelo Dureghello's patch for the flexcan driver fixes a potential div by zero, if the bitrate is not set during driver probe. Jimmy Assarsson's patch for the kvaser_pciefd disables bus load reporting in the device, if it was previously enabled by the vendor's out of tree drier. A patch for the kvaser_usb adds support for a new device, by adding the appropriate USB product ID. Tong Zhang contributes two patches for the c_can driver. First a use-after-free in the c_can_pci driver is fixed, in the second patch the runtime PM for the c_can_pci is fixed by moving the runtime PM enable/disable from the core driver to the platform driver. The last two patches are by Torin Cooper-Bennun for the m_can driver. First a extraneous msg loss warning is removed then he fixes the RX-path, which might be blocked by errors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zenghui Yu authored
The ena.rst documentation referred to end_start_xmit() when it should refer to ena_start_xmit(). Fix the typo. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Carlos Llamas authored
Fix multiple warnings seen with gcc 10.2.1: reuseaddr_ports_exhausted.c:32:41: warning: missing braces around initializer [-Wmissing-braces] 32 | struct reuse_opts unreusable_opts[12] = { | ^ 33 | {0, 0, 0, 0}, | { } { } Fixes: 7f204a7d ("selftests: net: Add SO_REUSEADDR test to check if 4-tuples are fully utilized.") Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Torin Cooper-Bennun authored
For M_CAN peripherals, m_can_rx_handler() was called with quota = 1, which caused any error handling to block RX from taking place until the next time the IRQ handler is called. This had been observed to cause RX to be blocked indefinitely in some cases. This is fixed by calling m_can_rx_handler with a sensibly high quota. Fixes: f524f829 ("can: m_can: Create a m_can platform framework") Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.comSuggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Torin Cooper-Bennun authored
Message loss from RX FIFO 0 is already handled in m_can_handle_lost_msg(), with netdev output included. Removing this warning also improves driver performance under heavy load, where m_can_do_rx_poll() may be called many times before this interrupt is cleared, causing this message to be output many times (thanks Mariusz Madej for this report). Fixes: e0d1f481 ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.comReported-by: Mariusz Madej <mariusz.madej@xtrack.com> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Tong Zhang authored
Currently doing modprobe c_can_pci will make the kernel complain: Unbalanced pm_runtime_enable! this is caused by pm_runtime_enable() called before pm is initialized. This fix is similar to 227619c3, move those pm_enable/disable code to c_can_platform. Fixes: 4cdd34b2 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller") Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.comSigned-off-by: Tong Zhang <ztong0001@gmail.com> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Tong Zhang authored
There is a UAF in c_can_pci_remove(). dev is released by free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later. To fix this issue, save the mmio address before releasing dev. Fixes: 5b92da04 ("c_can_pci: generic module for C_CAN/D_CAN on PCI") Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.comSigned-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Jimmy Assarsson authored
Add support for Kvaser USBcan Pro 4xHS. Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.comSigned-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Jimmy Assarsson authored
Under certain circumstances, when switching from Kvaser's linuxcan driver (kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting is not disabled. This is flooding the kernel log with prints like: [3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009 Always put the controller in the expected state, instead of assuming that bus load reporting is inactive. Note: If bus load reporting is enabled when the driver is loaded, you will still get a number of bus load packages (and printouts), before it is disabled. Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.comSigned-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Angelo Dureghello authored
For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27c ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.orgSigned-off-by: Angelo Dureghello <angelo@kernel-space.org> [mkl: use if instead of ? operator] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Stephane Grosjean authored
Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices. Fixes: ea8b65b5 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534d ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.comSigned-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The previous patch ensures that the TX flags (struct can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user configured value for CAN-FD frames. This patch sets the CAN frames flags unconditionally to the ISO-TP TX flags, so that they are initialized to a proper value. Otherwise when running "candump -x" on a classical CAN ISO-TP stream shows wrongly set "B" and "E" flags. | $ candump any,0:0,#FFFFFFFF -extA | [...] | can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00 | can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07 | can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E | can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05 Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames don't. This patch refuses to set TX flags (struct can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Martin Willi authored
When a non-initial netns is destroyed, the usual policy is to delete all virtual network interfaces contained, but move physical interfaces back to the initial netns. This keeps the physical interface visible on the system. CAN devices are somewhat special, as they define rtnl_link_ops even if they are physical devices. If a CAN interface is moved into a non-initial netns, destroying that netns lets the interface vanish instead of moving it back to the initial netns. default_device_exit() skips CAN interfaces due to having rtnl_link_ops set. Reproducer: ip netns add foo ip link set can0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60 CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1 Workqueue: netns cleanup_net [<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14) [<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8) [<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114) [<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac) [<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60) [<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380) [<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438) [<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8) [<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c) [<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) To properly restore physical CAN devices to the initial netns on owning netns exit, introduce a flag on rtnl_link_ops that can be set by drivers. For CAN devices setting this flag, default_device_exit() considers them non-virtual, applying the usual namespace move. The issue was introduced in the commit mentioned below, as at that time CAN devices did not have a dellink() operation. Fixes: e008b5fc ("net: Simplfy default_device_exit and improve batching.") Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.orgSigned-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
- 15 Mar, 2021 5 commits
-
-
Davide Caratti authored
Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using the Address Id and the IP Address, and hardcodes a destination port equal to zero. This is not ok for ADD_ADDR with port: ensure to account for the endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1. Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Ovechkin authored
Currently tcp_check_req can be called with obsolete req socket for which big socket have been already created (because of CPU race or early demux assigning req socket to multiple packets in gro batch). Commit e0f9759f ("tcp: try to keep packet if SYN_RCV race is lost") added retry in case when tcp_check_req is called for PSH|ACK packet. But if client sends RST+ACK immediatly after connection being established (it is performing healthcheck, for example) retry does not occur. In that case tcp_check_req tries to close req socket, leaving big socket active. Fixes: e0f9759f ("tcp: try to keep packet if SYN_RCV race is lost") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Reported-by: Oleg Senin <olegsenin@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Before calling tipc_aead_key_size(ptr), we need to ensure we have enough data to dereference ptr->keylen. We probably also want to make sure tipc_aead_key_size() wont overflow with malicious ptr->keylen values. Syzbot reported: BUG: KMSAN: uninit-value in __tipc_nl_node_set_key net/tipc/node.c:2971 [inline] BUG: KMSAN: uninit-value in tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023 CPU: 0 PID: 21060 Comm: syz-executor.5 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197 __tipc_nl_node_set_key net/tipc/node.c:2971 [inline] tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023 genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x1319/0x1610 net/netlink/genetlink.c:800 netlink_rcv_skb+0x6fa/0x810 net/netlink/af_netlink.c:2494 genl_rcv+0x63/0x80 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x11d6/0x14a0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x1740/0x1840 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345 ___sys_sendmsg net/socket.c:2399 [inline] __sys_sendmsg+0x714/0x830 net/socket.c:2432 __compat_sys_sendmsg net/compat.c:347 [inline] __do_compat_sys_sendmsg net/compat.c:354 [inline] __se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351 __ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351 do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline] __do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c RIP: 0023:0xf7f60549 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f555a5fc EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000200 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline] kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104 kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76 slab_alloc_node mm/slub.c:2907 [inline] __kmalloc_node_track_caller+0xa37/0x1430 mm/slub.c:4527 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2f8/0xb30 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1099 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline] netlink_sendmsg+0xdbc/0x1840 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345 ___sys_sendmsg net/socket.c:2399 [inline] __sys_sendmsg+0x714/0x830 net/socket.c:2432 __compat_sys_sendmsg net/compat.c:347 [inline] __do_compat_sys_sendmsg net/compat.c:354 [inline] __se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351 __ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351 do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline] __do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Fixes: e1f32190 ("tipc: add support for AEAD key setting via netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tuong Lien <tuong.t.lien@dektech.com.au> Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ong Boon Leong authored
if pl->mac_ops->mac_finish() failed, phylink_err should use "mac_finish" instead of "mac_prepare". Fixes: b7ad14c2 ("net: phylink: re-implement interface configuration with PCS") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xie He authored
"x25_close" is called by "hdlc_close" in "hdlc.c", which is called by hardware drivers' "ndo_stop" function. "x25_xmit" is called by "hdlc_start_xmit" in "hdlc.c", which is hardware drivers' "ndo_start_xmit" function. "x25_rx" is called by "hdlc_rcv" in "hdlc.c", which receives HDLC frames from "net/core/dev.c". "x25_close" races with "x25_xmit" and "x25_rx" because their callers race. However, we need to ensure that the LAPB APIs called in "x25_xmit" and "x25_rx" are called before "lapb_unregister" is called in "x25_close". This patch adds locking to ensure when "x25_xmit" and "x25_rx" are doing their work, "lapb_unregister" is not yet called in "x25_close". Reasons for not solving the racing between "x25_close" and "x25_xmit" by calling "netif_tx_disable" in "x25_close": 1. We still need to solve the racing between "x25_close" and "x25_rx"; 2. The design of the HDLC subsystem assumes the HDLC hardware drivers have full control over the TX queue, and the HDLC protocol drivers (like this driver) have no control. Controlling the queue here in the protocol driver may interfere with hardware drivers' control of the queue. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Mar, 2021 4 commits
-
-
Alexander Lobakin authored
flow_dissector_key_icmp::id is of type u16 (CPU byteorder), ICMP header has its ID field in network byteorder obviously. Sparse says: net/core/flow_dissector.c:178:43: warning: restricted __be16 degrades to integer Convert ID value to CPU byteorder when storing it into flow_dissector_key_icmp. Fixes: 5dec597e ("flow_dissector: extract more ICMP information") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
struct sockaddr_qrtr has a 2-byte hole, and qrtr_recvmsg() currently does not clear it before copying kernel data to user space. It might be too late to name the hole since sockaddr_qrtr structure is uapi. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 CPU: 0 PID: 29705 Comm: syz-executor.3 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 kmsan_internal_check_memory+0x202/0x520 mm/kmsan/kmsan.c:402 kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0x1ac/0x270 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] move_addr_to_user+0x3a2/0x640 net/socket.c:237 ____sys_recvmsg+0x696/0xd50 net/socket.c:2575 ___sys_recvmsg net/socket.c:2610 [inline] do_recvmmsg+0xa97/0x22d0 net/socket.c:2710 __sys_recvmmsg net/socket.c:2789 [inline] __do_sys_recvmmsg net/socket.c:2812 [inline] __se_sys_recvmmsg+0x24a/0x410 net/socket.c:2805 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2805 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465f69 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f43659d6188 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 0000000000465f69 RDX: 0000000000000008 RSI: 0000000020003e40 RDI: 0000000000000003 RBP: 00000000004bfa8f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000010060 R11: 0000000000000246 R12: 000000000056bf60 R13: 0000000000a9fb1f R14: 00007f43659d6300 R15: 0000000000022000 Local variable ----addr@____sys_recvmsg created at: ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 Bytes 2-3 of 12 are uninitialized Memory access of size 12 starts at ffff88817c627b40 Data copied to user address 0000000020000140 Fixes: bdabad3e ("net: Add Qualcomm IPC router") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Courtney Cavin <courtney.cavin@sonymobile.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tong Zhang authored
There are two issues when handling error case in com20020pci_probe() 1. priv might be not initialized yet when calling com20020pci_remove() from com20020pci_probe(), since the priv is set at the very last but it can jump to error handling in the middle and priv remains NULL. 2. memory leak - the net device is allocated in alloc_arcdev but not properly released if error happens in the middle of the big for loop [ 1.529110] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 1.531447] RIP: 0010:com20020pci_remove+0x15/0x60 [com20020_pci] [ 1.536805] Call Trace: [ 1.536939] com20020pci_probe+0x3f2/0x48c [com20020_pci] [ 1.537226] local_pci_probe+0x48/0x80 [ 1.539918] com20020pci_init+0x3f/0x1000 [com20020_pci] Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eva Dengler authored
This commit fixes three spelling typos in devlink-dpipe.rst and devlink-port.rst. Signed-off-by: Eva Dengler <eva.dengler@fau.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Mar, 2021 8 commits
-
-
Alex Elder authored
When a QMI handle is initialized, an array of message handler structures is provided, defining how any received message should be handled based on its type and message ID. The QMI core code traverses this array when a message arrives and calls the function associated with the (type, msg_id) found in the array. The array is supposed to be terminated with an empty (all zero) entry though. Without it, an unsupported message will cause the QMI core code to go past the end of the array. Fix this bug, by properly terminating the message handler arrays provided when QMI handles are set up by the IPA driver. Fixes: 530f9216 ("soc: qcom: ipa: AP/modem communications") Reported-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/gitDavid S. Miller authored
/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-12 This series contains updates to ice, i40e, ixgbe and igb drivers. Magnus adjusts the return value for xsk allocation for ice. This fixes reporting of napi work done and matches the behavior of other Intel NIC drivers for xsk allocations. Maciej moves storing of the rx_offset value to after the build_skb flag is set as this flag affects the offset value for ice, i40e, and ixgbe. Li RongQing resolves an issue where an Rx buffer can be reused prematurely with XDP redirect for igb. ====================
-
Lijun Pan authored
Tom wrote most of the driver code and his experience is valuable to us. Add him as a Reviewer so that patches will be Cc'ed and reviewed by him. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
The join self tests previously used the '-c' command line option to enable creation of pcap files for the tests that run, but the change to allow running a subset of the join tests made overlapping use of that option. Restore the capture functionality with '-c' and move the syncookie test option to '-k'. Fixes: 1002b89f ("selftests: mptcp: add command line arguments for mptcp_join.sh") Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilya Lipnitskiy authored
A recent change to MIPS ralink reset logic made it so mt7530 actually resets the switch on platforms such as mt7621 (where bit 2 is the reset line for the switch). That exposed an issue where the switch would not function properly in TRGMII mode after a reset. Reconfigure core clock in TRGMII mode to fix the issue. Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled. Fixes: 3f9ef778 ("MIPS: ralink: manage low reset lines") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The MPTCP_PUSH_PENDING define is 6 and these tests should be testing if BIT(6) is set. Fixes: c2e6048f ("mptcp: fix race in release_cb") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The PHY driver entry for BCM50160 and BCM50610M calls bcm54xx_config_init() but does not call bcm54xx_config_clock_delay() in order to configuration appropriate clock delays on the PHY, fix that. Fixes: 73333626 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dylan Hung authored
The interrupt handler may set the flag to reset the mac in the future, but that flag is not cleared once the reset has occurred. Fixes: 10cbd640 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-