- 17 Jul, 2019 30 commits
-
-
Peter Rosin authored
Patch series "lib/string: search for NUL with strchr/strnchr". I noticed an inconsistency where strchr and strnchr do not behave the same with respect to the trailing NUL. strchr is standardised and the kernel function conforms, and the kernel relies on the behavior. So, naturally strchr stays as-is and strnchr is what I change. While writing a few tests to verify that my new strnchr loop was sane, I noticed that the tests for memset16/32/64 had a problem. Since it's all about the lib/string.c file I made a short series of it all... This patch (of 3): strchr considers the terminating NUL to be part of the string, and NUL can thus be searched for with that function. For consistency, do the same with strnchr. Link: http://lkml.kernel.org/r/20190506124634.6807-2-peda@axentia.seSigned-off-by:
Peter Rosin <peda@axentia.se> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
list_del() poisoning can generate 2 64-bit immediate loads but it also can generate one 64-bit immediate load and an addition: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 05 00 01 00 00 <=====> add rax,0x100 48 89 47 60 mov QWORD PTR [rdi+0x60],rax However on x86_64 not all constants are equal: those within [-128, 127] range can be added with shorter "add r64, imm32" instruction: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 83 c0 22 <======> add rax,0x22 48 89 47 60 mov QWORD PTR [rdi+0x60],rax Patch saves 2 bytes per some LIST_POISON2 usage. (Slightly disappointing) space savings on F29 x86_64 config: add/remove: 0/0 grow/shrink: 0/2164 up/down: 0/-5184 (-5184) Function old new delta zstd_get_workspace 548 546 -2 ... mlx4_delete_all_resources_for_slave 4826 4804 -22 Total: Before=83304131, After=83298947, chg -0.01% New constants are: 0xdead000000000100 0xdead000000000122 Note: LIST_POISON1 can't be changed to ...11 because something in page allocator requires low bit unset. Link: http://lkml.kernel.org/r/20190513191502.GA8492@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Joe Perches authored
Add a command line switch --no-moderated to skip L: mailing lists marked with 'moderated'. Some people prefer not emailing moderated mailing lists as the moderation time can be indeterminate and some emails can be intentionally dropped by a moderator. This can cause fragmentation of email threads when some are subscribed to a moderated list but others are not and emails are dropped. Link: http://lkml.kernel.org/r/6f23c2918ad9fc744269feb8f909bdfb105c5afc.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Qian Cai authored
Fix this compilation warning on x86 by making flush_cache_vmap() inline. lib/ioremap.c: In function 'ioremap_page_range': lib/ioremap.c:214:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] unsigned long start; ^~~~~ While at it, convert all other similar functions to inline for consistency. Link: http://lkml.kernel.org/r/1562594592-15228-1-git-send-email-cai@lca.pwSigned-off-by:Qian Cai <cai@lca.pw> Reviewed-by:
-
Stephen Kitt authored
isa_page_to_bus() is deprecated and is no longer used anywhere. Remove it entirely. Link: http://lkml.kernel.org/r/20190613161155.16946-1-steve@sk2.orgSigned-off-by:
Stephen Kitt <steve@sk2.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Masahiro Yamada authored
Now that BIT() can be used from assembly code, we can safely replace _BITUL() with equivalent BIT(). UAPI headers are still required to use _BITUL(), but there is no more reason to use it in kernel headers. BIT() is shorter. Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Masahiro Yamada authored
BIT(), GENMASK(), etc. are useful to define register bits of hardware. However, low-level code is often written in assembly, where they are not available due to the hard-coded 1UL, 0UL. In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h use _BITUL() instead of BIT() so that the register bit macros are available in assembly. Using macros in include/uapi/linux/const.h have two reasons: [1] For use in uapi headers We should use underscore-prefixed variants for user-space. [2] For use in assembly code Since _BITUL() uses UL(1) instead of 1UL, it can be used as an alternative of BIT(). For [2], it is pretty easy to change BIT() etc. for use in assembly. This allows to replace _BUTUL() in kernel-space headers with BIT(). Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.comSigned-off-by:
-
Weitao Hou authored
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.comSigned-off-by:
Weitao Hou <houweitaoo@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Radoslaw Burny authored
Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357 (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by:
Radoslaw Burny <rburny@google.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Alexey Dobriyan authored
I thought that /proc/sysvipc has the same bug as /proc/net commit 1fde6f21 proc: fix /proc/net/* after setns(2) However, it doesn't! /proc/sysvipc files do get_ipc_ns(current->nsproxy->ipc_ns); in their open() hook and avoid the problem. Keep the test, maybe /proc/sysvipc will become broken someday :-\ Link: http://lkml.kernel.org/r/20190706180146.GA21015@avx2Signed-off-by:
-
Alexey Dobriyan authored
Don't repeat function signatures twice. This is a kind-of-precursor for "struct proc_ops". Note: typeof(pde->proc_fops->...) ...; can't be used because ->proc_fops is "const struct file_operations *". "const" prevents assignment down the code and it can't be deleted in the type system. Link: http://lkml.kernel.org/r/20190529191110.GB5703@avx2Signed-off-by:
-
Alexey Dobriyan authored
Add typeof_member() macro so that types can be extracted without introducing dummy variables. Link: http://lkml.kernel.org/r/20190529190720.GA5703@avx2Signed-off-by:
-
Kairui Song authored
Since commit 2724273e ("vmcore: add API to collect hardware dump in second kernel"), drivers are allowed to add device related dump data to vmcore as they want by using the device dump API. This has a potential issue, the data is stored in memory, drivers may append too much data and use too much memory. The vmcore is typically used in a kdump kernel which runs in a pre-reserved small chunk of memory. So as a result it will make kdump unusable at all due to OOM issues. So introduce new 'novmcoredd' command line option. User can disable device dump to reduce memory usage. This is helpful if device dump is using too much memory, disabling device dump could make sure a regular vmcore without device dump data is still available. [akpm@linux-foundation.org: tweak documentation] [akpm@linux-foundation.org: vmcore.c needs moduleparam.h] Link: http://lkml.kernel.org/r/20190528111856.7276-1-kasong@redhat.comSigned-off-by:
Kairui Song <kasong@redhat.com> Acked-by:
Dave Young <dyoung@redhat.com> Reviewed-by:
Bhupesh Sharma <bhsharma@redhat.com> Cc: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Cc: "David S . Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
Test tries to access vsyscall page and if it doesn't exist gets SIGSEGV which can spam into dmesg. However the segfault happens by design. Handle it and carry information via exit code to parent. Link: http://lkml.kernel.org/r/20190524181256.GA2260@avx2Signed-off-by:
-
Christoph Hellwig authored
The whole header file deals with swap entries and PTEs, none of which can exist for nommu builds. The current nommu ports have lots of stubs to allow the inline functions in swapops.h to compile, but as none of this functionality is actually used there is no point in even providing it. This way we don't have to provide the stubs for the upcoming RISC-V nommu port, and can eventually remove it from the existing ports. Link: http://lkml.kernel.org/r/20190703122359.18200-4-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Christoph Hellwig authored
Link: http://lkml.kernel.org/r/20190703122359.18200-3-hch@lst.deSigned-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Christoph Hellwig authored
We can't expose UAPI symbols differently based on CONFIG_ symbols, as userspace won't have them available. Instead always define the flag, but only respect it based on the config option. Link: http://lkml.kernel.org/r/20190703122359.18200-2-hch@lst.deSigned-off-by:
-
Doug Berger authored
The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2 ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Henry Burns authored
z3fold_page_migration() calls memcpy(new_zhdr, zhdr, PAGE_SIZE). However, zhdr contains fields that can't be directly coppied over (ex: list_head, a circular linked list). We only need to initialize the linked lists in new_zhdr, as z3fold_isolate_page() already ensures that these lists are empty Additionally it is possible that zhdr->work has been placed in a workqueue. In this case we shouldn't migrate the page, as zhdr->work references zhdr as opposed to new_zhdr. Link: http://lkml.kernel.org/r/20190716000520.230595-1-henryburns@google.com Fixes: 1f862989 ("mm/z3fold.c: support page migration") Signed-off-by:
Henry Burns <henryburns@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Vitaly Vul <vitaly.vul@sony.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by:
-
Henry Burns authored
z3fold_page_migrate() will never succeed because it attempts to acquire a lock that has already been taken by migrate.c in __unmap_and_move(). __unmap_and_move() migrate.c trylock_page(oldpage) move_to_new_page(oldpage_newpage) a_ops->migrate_page(oldpage, newpage) z3fold_page_migrate(oldpage, newpage) trylock_page(oldpage) Link: http://lkml.kernel.org/r/20190710213238.91835-1-henryburns@google.com Fixes: 1f862989 ("mm/z3fold.c: support page migration") Signed-off-by: -
Andrew Morton authored
Six sites are presently altering current->reclaim_state. There is a risk that one function stomps on a caller's value. Use a helper function to catch such errors. Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Yafang Shao authored
There are six different reclaim paths by now: - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. There're some drawbacks if we don't calculate the reclaimed slab caches. - The sc->nr_reclaimed isn't correct if there're some slab caches relcaimed in this path. - The slab caches may be reclaimed thoroughly if there're lots of reclaimable slab caches and few page caches. Let's take an easy example for this case. If one memcg is full of slab caches and the limit of it is 512M, in other words there're approximately 512M slab caches in this memcg. Then the limit of the memcg is reached and the memcg reclaim begins, and then in this memcg reclaim path it will continuesly reclaim the slab caches until the sc->priority drops to 0. After this reclaim stops, you will find there're few slab caches left, which is less than 20M in my test case. While after this patch applied the number is greater than 300M and the sc->priority only drops to 3. Link: http://lkml.kernel.org/r/1561112086-6169-3-git-send-email-laoar.shao@gmail.comSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by:
-
Yafang Shao authored
Patch series "mm/vmscan: calculate reclaimed slab in all reclaim paths". This patchset is to fix the issues in doing shrink slab. There're six different reclaim paths by now, - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. The issues are detailed explained in patch #2. We should calculate the reclaimed slab caches in every reclaim path. In order to do it, the struct reclaim_state is placed into the struct shrink_control. In node reclaim path, there'is another issue about shrinking slab, which is adressed in "mm/vmscan: shrink slab in node reclaim" (https://lore.kernel.org/linux-mm/1559874946-22960-1-git-send-email-laoar.shao@gmail.com/). This patch (of 2): The struct reclaim_state is used to record how many slab caches are reclaimed in one reclaim path. The struct shrink_control is used to control one reclaim path. So we'd better put reclaim_state into shrink_control. [laoar.shao@gmail.com: remove reclaim_state assignment from __perform_reclaim()] Link: http://lkml.kernel.org/r/1561381582-13697-1-git-send-email-laoar.shao@gmail.com Link: http://lkml.kernel.org/r/1561112086-6169-2-git-send-email-laoar.shao@gmail.comSigned-off-by:
-
Yafang Shao authored
After commit 815744d7 ("mm: memcontrol: don't batch updates of local VM stats and events"), the local VM counter are not in sync with the hierarchical ones. Below is one example in a leaf memcg on my server (with 8 CPUs): inactive_file 3567570944 total_inactive_file 3568029696 We find that the deviation is very great because the 'val' in __mod_memcg_state() is in pages while the effective value in memcg_stat_show() is in bytes. So the maximum of this deviation between local VM stats and total VM stats can be (32 * number_of_cpu * PAGE_SIZE), that may be an unacceptably great value. We should keep the local VM stats in sync with the total stats. In order to keep this behavior the same across counters, this patch updates __mod_lruvec_state() and __count_memcg_events() as well. Link: http://lkml.kernel.org/r/1562851979-10610-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <shaoyafang@didiglobal.com> Signed-off-by:
-
Henry Burns authored
One of the gfp flags used to show that a page is movable is __GFP_HIGHMEM. Currently z3fold_alloc() fails when __GFP_HIGHMEM is passed. Now that z3fold pages are movable, we allow __GFP_HIGHMEM. We strip the movability related flags from the call to kmem_cache_alloc() for our slots since it is a kernel allocation. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190712222118.108192-1-henryburns@google.comSigned-off-by:
Vitaly Wool <vitalywool@gmail.com> Reviewed-by:
-
Ryohei Suzuki authored
A comment referred to a non-existent function alloc_cma(), which should have been cma_alloc(). Link: http://lkml.kernel.org/r/20190712085549.5920-1-ryh.szk.cmnty@gmail.comSigned-off-by:
Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
Clang gets rather confused about two variables in the same special section when one of them is not initialized, leading to an assembler warning later: /tmp/slab_common-18f869.s: Assembler messages: /tmp/slab_common-18f869.s:7526: Warning: ignoring changed section attributes for .data..ro_after_init Adding an initialization to kmalloc_caches is rather silly here but does avoid the issue. Link: https://bugs.llvm.org/show_bug.cgi?id=42570 Link: http://lkml.kernel.org/r/20190712090455.266021-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
-
Arnd Bergmann authored
The mpi library contains some rather old inline assembly statements that produce a lot of warnings for 32-bit x86, such as: lib/mpi/mpih-div.c:76:16: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions udiv_qrnnd(qp[i], n1, n1, np[i], d); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:423:20: note: expanded from macro 'udiv_qrnnd' : "=a" ((USItype)(q)), \ ~~~~~~~~~~^~ There is no point in doing a type cast for the output of an inline assembler statement, so just remove the cast here, as we have done for other architectures in the past. See also dea632ca ("lib/mpi: fix build with clang"). Link: http://lkml.kernel.org/r/20190712090740.340186-1-arnd@arndb.deSigned-off-by:Nick Desaulniers <ndesaulniers@google.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_SYSFS is disabled but CONFIG_TMPFS is enabled, we get a warning about shmem_parse_huge() never being called: mm/shmem.c:417:12: error: unused function 'shmem_parse_huge' [-Werror,-Wunused-function] static int shmem_parse_huge(const char *str) Change the #ifdef so we no longer build this function in that configuration. Link: http://lkml.kernel.org/r/20190712091141.673355-1-arnd@arndb.de Fixes: 144df3b288c4 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Signed-off-by:
-
Vitaly Wool authored
As reported by Henry Burns: Running z3fold stress testing with address sanitization showed zhdr->slots was being used after it was freed. z3fold_free(z3fold_pool, handle) free_handle(handle) kmem_cache_free(pool->c_handle, zhdr->slots) release_z3fold_page_locked_list(kref) __release_z3fold_page(zhdr, true) zhdr_to_pool(zhdr) slots_to_pool(zhdr->slots) *BOOM* To fix this, add pointer to the pool back to z3fold_header and modify zhdr_to_pool to return zhdr->pool. Link: http://lkml.kernel.org/r/20190708134808.e89f3bfadd9f6ffd7eff9ba9@gmail.com Fixes: 7c2b8baa ("mm/z3fold.c: add structure for buddy handles") Signed-off-by:
-
- 16 Jul, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "New Functionality: - Provide support for ACPI enumeration; gpio_backlight Fix-ups: - SPDX fixups; pwm_bl - Fix linear brightness levels to include number available; pwm_bl" * tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix heuristic to determine number of brightness levels backlight: gpio_backlight: Enable ACPI enumeration backlight: pwm_bl: Convert to use SPDX identifier
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client -
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ... -
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
-
- 15 Jul, 2019 2 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
This reverts commit 031e610a, reversing changes made to 52d2d44e. The mm changes in there we premature and not fully ack or reviewed by core mm folks, I dropped the ball by merging them via this tree, so lets take em all back out. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This reverts commit 6dfc43d3. Going to revert the whole vmwwgfx pull. Signed-off-by:
-
