- 09 Feb, 2015 7 commits
-
-
Sachin Prabhu authored
commit ca7df8e0 upstream. Commit c11f1df5 requires writers to wait for any pending oplock break handler to complete before proceeding to write. This is done by waiting on bit CIFS_INODE_PENDING_OPLOCK_BREAK in cifsFileInfo->flags. This bit is cleared by the oplock break handler job queued on the workqueue once it has completed handling the oplock break allowing writers to proceed with writing to the file. While testing, it was noticed that the filehandle could be closed while there is a pending oplock break which results in the oplock break handler on the cifsiod workqueue being cancelled before it has had a chance to execute and clear the CIFS_INODE_PENDING_OPLOCK_BREAK bit. Any subsequent attempt to write to this file hangs waiting for the CIFS_INODE_PENDING_OPLOCK_BREAK bit to be cleared. We fix this by ensuring that we also clear the bit CIFS_INODE_PENDING_OPLOCK_BREAK when we remove the oplock break handler from the workqueue. The bug was found by Red Hat QA while testing using ltp's fsstress command. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Hemmo Nieminen authored
commit c7754e75 upstream. As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by:
Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Felix Fietkau authored
commit a3e6c1ef upstream. If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/Signed-off-by:
-
Charlotte Richardson authored
commit 51ac3d2f upstream. NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by:
Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit 49d2ca84 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when setting the gpio-line polarity. Fixes: 07697461 ("gpiolib: add support for changing value polarity in sysfs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 0f303db0 upstream. Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when creating a link. Fixes: a4177ee7 ("gpiolib: allow exported GPIO nodes to be named using sysfs links") Signed-off-by:
-
Martin Walch authored
commit 503c8230 upstream. The struct gstr has a capacity that may differ from the actual string length. However, a string manipulation in the function search_conf made the assumption that it is the same, which led to messing up some search results, especially when the content of the gstr in use had not yet reached at least 63 chars. Signed-off-by:
Martin Walch <walch.martin@web.de> Acked-by:
Wang YanQing <udknight@gmail.com> Acked-by:
Benjamin Poirier <bpoirier@suse.de> Reviewed-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by:
-
- 08 Feb, 2015 33 commits
-
-
Tejun Heo authored
commit 29187a9e upstream. A worker_pool's forward progress is guaranteed by the fact that the last idle worker assumes the manager role to create more workers and summon the rescuers if creating workers doesn't succeed in timely manner before proceeding to execute work items. This manager role is implemented in manage_workers(), which indicates whether the worker may proceed to work item execution with its return value. This is necessary because multiple workers may contend for the manager role, and, if there already is a manager, others should proceed to work item execution. Unfortunately, the function also indicates that the worker may proceed to work item execution if need_to_create_worker() is false at the head of the function. need_to_create_worker() tests the following conditions. pending work items && !nr_running && !nr_idle The first and third conditions are protected by pool->lock and thus won't change while holding pool->lock; however, nr_running can change asynchronously as other workers block and resume and while it's likely to be zero, as someone woke this worker up in the first place, some other workers could have become runnable inbetween making it non-zero. If this happens, manage_worker() could return false even with zero nr_idle making the worker, the last idle one, proceed to execute work items. If then all workers of the pool end up blocking on a resource which can only be released by a work item which is pending on that pool, the whole pool can deadlock as there's no one to create more workers or summon the rescuers. This patch fixes the problem by removing the early exit condition from maybe_create_worker() and making manage_workers() return false iff there's already another manager, which ensures that the last worker doesn't start executing work items. We can leave the early exit condition alone and just ignore the return value but the only reason it was put there is because the manage_workers() used to perform both creations and destructions of workers and thus the function may be invoked while the pool is trying to reduce the number of workers. Now that manage_workers() is called only when more workers are needed, the only case this early exit condition is triggered is rare race conditions rendering it pointless. Tested with simulated workload and modified workqueue code which trigger the pool deadlock reliably without this patch. tj: Updated to v3.14 where manage_workers() is responsible not only for creating more workers but also destroying surplus ones. maybe_create_worker() needs to keep its early exit condition to avoid creating a new worker when manage_workers() is called to destroy surplus ones. Other than that, the adaptabion is straight-forward. Both maybe_{create|destroy}_worker() functions are converted to return void and manage_workers() returns %false iff it lost manager arbitration. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Eric Sandeen <sandeen@sandeen.net> Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net Cc: Dave Chinner <david@fromorbit.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
Ilya Dryomov authored
commit ae43e9d0 upstream. The comment for rbd_dev_parent_get() said * We must get the reference before checking for the overlap to * coordinate properly with zeroing the parent overlap in * rbd_dev_v2_parent_info() when an image gets flattened. We * drop it again if there is no overlap. but the "drop it again if there is no overlap" part was missing from the implementation. This lead to absurd parent_ref values for images with parent_overlap == 0, as parent_ref was incremented for each img_request and virtually never decremented. Fix this by leveraging the fact that refresh path calls rbd_dev_v2_parent_info() under header_rwsem and use it for read in rbd_dev_parent_get(), instead of messing around with atomics. Get rid of barriers in rbd_dev_v2_parent_info() while at it - I don't see what they'd pair with now and I suspect we are in a pretty miserable situation as far as proper locking goes regardless. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> Reviewed-by:
Alex Elder <elder@linaro.org> [idryomov@redhat.com: backport to 3.14: context] Signed-off-by:
-
Liu ShuoX authored
commit b0aa931f upstream. ramoops_get_next_prz get the prz according the paramters. If it get a uninitialized prz, access its members by following persistent_ram_old_size(prz) will cause a NULL pointer crash. Ex: if ftrace_size is 0, fprz will be NULL. Fix it by return NULL in advance. Signed-off-by:
Liu ShuoX <shuox.liu@intel.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: HuKeping <hukeping@huawei.com> Signed-off-by:
-
Liu ShuoX authored
commit aa9a4a1e upstream. In ramoops_pstore_read, a valid prz pointer with zero size buffer will break traverse of all persistent ram buffers. The latter buffer might be lost. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Liu ShuoX authored
commit 57fd8353 upstream. *_read_cnt in ramoops_context need to be cleared during pstore ->open to support mutli times getting the records. The patch added missed ftrace_read_cnt clearing and removed duplicate clearing in ramoops_probe. Signed-off-by:
-
Russell King authored
commit 6b076991 upstream. When setting up the CMA region, we must ensure that the old section mappings are flushed from the TLB before replacing them with page tables, otherwise we can suffer from mismatched aliases if the CPU speculatively prefetches from these mappings at an inopportune time. A mismatched alias can occur when the TLB contains a section mapping, but a subsequent prefetch causes it to load a page table mapping, resulting in the possibility of the TLB containing two matching mappings for the same virtual address region. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by:
-
Bob Paauwe authored
commit af1a7301 upstream. When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by:
Dan Hettena <danh@ghs.com> Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Mugunthan V N authored
commit 02a54164 upstream. In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Reported-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ashay Jaiswal authored
commit 83b0302d upstream. The regulator framework maintains a list of consumer regulators for a regulator device and protects it from concurrent access using the regulator device's mutex lock. In the case of regulator_put() the consumer is removed and regulator device's parameters are updated without holding the regulator device's mutex. This would lead to a race condition between the regulator_put() and any function which traverses the consumer list or modifies regulator device's parameters. Fix this race condition by holding the regulator device's mutex in case of regulator_put. Signed-off-by:
Ashay Jaiswal <ashayj@codeaurora.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mika Westerberg authored
commit c957e8f0 upstream. Once the current message is finished, the driver notifies SPI core about this by calling spi_finalize_current_message(). This function queues next message to be transferred. If there are more messages in the queue, it is possible that the driver is asked to transfer the next message at this point. When spi_finalize_current_message() returns the driver clears the drv_data->cur_chip pointer to NULL. The problem is that if the driver already started the next message clearing drv_data->cur_chip will cause NULL pointer dereference which crashes the kernel like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] PGD 78bb8067 PUD 37712067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 11 Comm: ksoftirqd/1 Tainted: G O 3.18.0-rc4-mjo #5 Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS MNW2CRB1.X64.0071.R30.1408131301 08/13/2014 task: ffff880077f9f290 ti: ffff88007a820000 task.ti: ffff88007a820000 RIP: 0010:[<ffffffffa0022bc8>] [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] RSP: 0018:ffff88007a823d08 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8800379a4430 RCX: 0000000000000026 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff8800379a4430 RBP: ffff88007a823d18 R08: 00000000ffffffff R09: 000000007a9bc65a R10: 000000000000028f R11: 0000000000000005 R12: ffff880070123e98 R13: ffff880070123de8 R14: 0000000000000100 R15: ffffc90004888000 FS: 0000000000000000(0000) GS:ffff880079a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000048 CR3: 000000007029b000 CR4: 00000000001007e0 Stack: ffff88007a823d58 ffff8800379a4430 ffff88007a823d48 ffffffffa0022c89 0000000000000000 ffff8800379a4430 0000000000000000 0000000000000006 ffff88007a823da8 ffffffffa0023be0 ffff88007a823dd8 ffffffff81076204 Call Trace: [<ffffffffa0022c89>] giveback+0x69/0xa0 [spi_pxa2xx_platform] [<ffffffffa0023be0>] pump_transfers+0x710/0x740 [spi_pxa2xx_platform] [<ffffffff81076204>] ? pick_next_task_fair+0x744/0x830 [<ffffffff81049679>] tasklet_action+0xa9/0xe0 [<ffffffff81049a0e>] __do_softirq+0xee/0x280 [<ffffffff81049bc0>] run_ksoftirqd+0x20/0x40 [<ffffffff810646df>] smpboot_thread_fn+0xff/0x1b0 [<ffffffff810645e0>] ? SyS_setgroups+0x150/0x150 [<ffffffff81060f9d>] kthread+0xcd/0xf0 [<ffffffff81060ed0>] ? kthread_create_on_node+0x180/0x180 [<ffffffff8187a82c>] ret_from_fork+0x7c/0xb0 Fix this by clearing drv_data->cur_chip before we call spi_finalize_current_message(). Reported-by:
Martin Oldfield <m@mjoldfield.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Joe Thornber authored
commit 766a7888 upstream. Commit 9b1cc9f2 ("dm cache: share cache-metadata object across inactive and active DM tables") mistakenly ignored the use of ERR_PTR returns. Restore missing IS_ERR checks and ERR_PTR returns where appropriate. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2a7eaea0 upstream. You can't modify the metadata in these modes. It's better to fail these messages immediately than let the block-manager deny write locks on metadata blocks. Otherwise these failed metadata changes will trigger 'needs_check' to get set in the metadata superblock -- requiring repair using the thin_check utility. Signed-off-by:
-
Johannes Berg authored
commit 0fa7b391 upstream. In case userspace attempts to obtain key information for or delete a unicast key, this is currently erroneously rejected unless the driver sets the WIPHY_FLAG_IBSS_RSN flag. Apparently enough drivers do so it was never noticed. Fix that, and while at it fix a potential memory leak: the error path in the get_key() function was placed after allocating a message but didn't free it - move it to a better place. Luckily admin permissions are needed to call this operation. Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mathy Vanhoef authored
commit 3a5c5e81 upstream. Fix a regression introduced by commit a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by using the CCK flag again. Fixes: a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") Signed-off-by:
Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit 3175e1dc upstream. If we start state recovery on a client that failed to initialise correctly, then we are very likely to Oops. Reported-by:
"Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de> Link: http://lkml.kernel.org/r/130621862.279655.1421851650684.JavaMail.zimbra@desy.deSigned-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Peng Tao authored
commit ee8a1a8b upstream. We only support swap file calling nfs_direct_IO. However, application might be able to get to nfs_direct_IO if it toggles O_DIRECT flag during IO and it can deadlock because we grab inode->i_mutex in nfs_file_direct_write(). So return 0 for such case. Then the generic layer will fall back to buffer IO. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Jochen Hein authored
commit 1d90d6d5 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Signed-off-by:
Jochen Hein <jochen@jochen.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Peter Hutterer authored
commit 8543cf1c upstream. LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Reported-and-tested-by:
Bjoern Olausson <bjoern@olausson.de> Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
-
Paul Osmialowski authored
commit 34e81ad5 upstream. This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by:
Paul Osmialowski <p.osmialowsk@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ilya Dryomov authored
commit e69b8d41 upstream. This effectively reverts the last hunk of 392a9dad ("rbd: detect when clone image is flattened"). The problem with parent_overlap != 0 condition is that it's possible and completely valid to have an image with parent_overlap == 0 whose parent state needs to be cleaned up on unmap. The next commit, which drops the "clone image now standalone" logic, opens up another window of opportunity to hit this, but even without it # cat parent-ref.sh #!/bin/bash rbd create --image-format 2 --size 1 foo rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar rbd resize --allow-shrink --size 0 bar rbd resize --size 1 bar DEV=$(rbd map bar) rbd unmap $DEV leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client hanging around. My thinking behind calling rbd_dev_parent_put() unconditionally is that there shouldn't be any requests in flight at that point in time as we are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused by flatten is delayed by in-flight requests, it will have finished by the time we reach rbd_dev_unprobe() caused by unmap, thus turning unconditional rbd_dev_parent_put() into a no-op. Fixes: http://tracker.ceph.com/issues/10352Signed-off-by:
-
Clemens Ladisch authored
commit 0767e95b upstream. When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by:
Peter Billam <peter@www.pjb.com.au> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Laurent Dufour authored
commit e6eb2eba upstream. The commit 3b8a3c01 ("powerpc/pseries: Fix endiannes issue in RTAS call from xmon") was fixing an endianness issue in the call made from xmon to RTAS. However, as Michael Ellerman noticed, this fix was not complete, the token value was not byte swapped. This lead to call an unexpected and most of the time unexisting RTAS function, which is silently ignored by RTAS. This fix addresses this hole. Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
-
Ahmed S. Darwish authored
commit e638642b upstream. While being in an ERROR_WARNING state, and receiving further bus error events with error counters still in the ERROR_WARNING range of 97-127 inclusive, the state handling code erroneously reverts back to ERROR_ACTIVE. Per the CAN standard, only revert to ERROR_ACTIVE when the error counters are less than 96. Moreover, in certain Kvaser models, the BUS_ERROR flag is always set along with undefined bits in the M16C status register. Thus use bitwise operators instead of full equality for checking that register against bus errors. Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
commit 14c10c2a upstream. On some x86 laptops, plugging a Kvaser device again after an unplug makes the firmware always ignore the very first command. For such a case, provide some room for retries instead of completely exiting the driver init code. Signed-off-by:
-
Ahmed S. Darwish authored
commit 3803fa69 upstream. Send expected argument to the URB completion hander: a CAN netdevice instead of the network interface private context `kvaser_usb_net_priv'. This was discovered by having some garbage in the kernel log in place of the netdevice names: can0 and can1. Signed-off-by:
-
Ahmed S. Darwish authored
commit ded50066 upstream. Upon receiving a hardware event with the BUS_RESET flag set, the driver kills all of its anchored URBs and resets all of its transmit URB contexts. Unfortunately it does so under the context of URB completion handler `kvaser_usb_read_bulk_callback()', which is often called in an atomic context. While the device is flooded with many received error packets, usb_kill_urb() typically sleeps/reschedules till the transfer request of each killed URB in question completes, leading to the sleep in atomic bug. [3] In v2 submission of the original driver patch [1], it was stated that the URBs kill and tx contexts reset was needed since we don't receive any tx acknowledgments later and thus such resources will be locked down forever. Fortunately this is no longer needed since an earlier bugfix in this patch series is now applied: all tx URB contexts are reset upon CAN channel close. [2] Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF event, which is the recommended handling method advised by the device manufacturer. [1] http://article.gmane.org/gmane.linux.network/239442 http://www.webcitation.org/6Vr2yagAQ [2] can: kvaser_usb: Reset all URB tx contexts upon channel close 889b77f7 [3] Stacktrace: <IRQ> [<ffffffff8158de87>] dump_stack+0x45/0x57 [<ffffffff8158b60c>] __schedule_bug+0x41/0x4f [<ffffffff815904b1>] __schedule+0x5f1/0x700 [<ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10 [<ffffffff81590684>] schedule+0x24/0x70 [<ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0 [<ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80 [<ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb] [<ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb] [<ffffffff8108b14a>] ? vprintk_default+0x1a/0x20 [<ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb] [<ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0 [<ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110 [<ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd] [<ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20 [<ffffffff81069f65>] ? local_clock+0x15/0x30 [<ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd] [<ffffffff814fbb31>] ? process_backlog+0xb1/0x130 [<ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd] [<ffffffff81479fc1>] usb_hcd_irq+0x21/0x30 [<ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120 [<ffffffff8108c0ed>] handle_irq_event+0x3d/0x60 [<ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110 [<ffffffff81004dfd>] handle_irq+0x1d/0x30 [<ffffffff81004727>] do_IRQ+0x57/0x100 [<ffffffff8159482a>] common_interrupt+0x6a/0x6a Signed-off-by:
-
Peter Ujfalusi authored
commit 20602e34 upstream. We should select FSR also to be driven by McBSP, not only FSX. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
-
Zidan Wang authored
commit 22ee76da upstream. wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by:
Zidan Wang <b50113@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Andy Shevchenko authored
commit 67bf9cda upstream. The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d9 (spi/dw_spi: add DMA support) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Adrian Hunter authored
commit 1f7f2652 upstream. Add PCI IDs for SPT eMMC, SDIO and SD card. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit a06586b6 upstream. Braswell eMMC host controller specifies an incorrect timeout clock frequncy in the capabilities registers. The correct value is 1 MHz. Signed-off-by:
-
Alan Cox authored
commit 066173b6 upstream. The hardware is the same as used in Baytrail. Add these new PCI IDs to the driver's list of supported IDs. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Adam Lee authored
commit 522624f9 upstream. Break out definitions in sdhci-pci.c to sdhci-pci.h, for introducing module files like sdhci-pci-xxx.c Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
-
